Printing to a Linksys Wireless Print Server with my MAC

have a small home network using an ATT DSL modem-router. I have several PCs hardwired to the router and 1 older MAC wireless. I have a MAC G4 laptop and a Dell laptop (my wife's) also connected wirelessly and all work well. I have added a Linksys wireless print server today and am able to get my wife's laptop to print easily and reliable as does the hardwired Dell. What I need is to get my MAC laptop to print wirelessly as well. I have tried all the options in the printer set-up but it does not see the print server. Linksys does not support MAC and there are no MAC drivers for the print server to download that I know of. Does anyone know of a fix on how I could configure this equipment so I can print wirelessly from my MAC laptop. Or perhaps bypass the print server and print using the modem-router and the same printer. I would appreciate any suggestions one could lend. Thanks much.
Power Book G4 17" Mac OS X (10.4.10) Virtual PC capable

Looking at figure 8-5 and the text to its left in the User Guide.
Click Add in Printer Setup, then select IP printer > IPP. Enter the print server's IP address AND queue name P1. With that info filled in OS X has all it needs to address the printer on the print server.
Download and install the CUPS driver version 1.1.0, and choose it when you Add in Printer Setup.

Similar Messages

Resolution - Printing HP LaserJet & Linksys Wireless Print Server WPS54GU2

Hello Guys:
After trying to figure out for 10 days and calling HP, Applet and Linksys support, i finally am able to print to my printer.
I have iMac running Tiger 10.4.8. I have a HP LaserJet 1012 Printer connected in a USB Port to the Wireless Print Server WPS54GU2. This is what I did to get it working.
First install the following drivers:
1) Go to http://www.linuxprinting.org/macosx/hpijs/ and download hpijs-foomatic-2.0.2.ppc.dmg and espgs-7.07.1.ppc.dmg file. Install hpijs first and espgs second.
2) After that Go to Server Preferences, Double click on Print/Fax.
3) Click on the "+" sign, select Line Printer Daemon - LPD
4) In the Address field, enter the IP address of your print server.
5) In the Queue name (This is very important). I used L2 for USB. You can try P1, L1 as well. Not sure how you have connected to the print server. For me L2 worked. I had tried using L1 and P1 and it didn't work for me.
6) The Name field should automatically be populated.
7) In the Print Using, select HP and then select "HP LaserJet 1012 Foomatic/hpijs" as the printer or whatever driver you have for your printer.
8) Click on Add
And now open up text edit or something and you should be able to print.
let me know if there are any questions.

Try Repairing permissions (Disk Utility). Then restart, then add again.
What do you mean by the printer doesn't show up - the driver (print using:)?
You can try the generic HP Photosmart P1100 Gimp-Print driver that comes in OS X.

Sharing Linksys Wireless Print Server with MAC and PC - How to do?

I have lost the capability to share a printer on my network by using the Linksys Wireless Print Server-model number WPS54G -V2. Prior to having to return my previous Print Server on an RMA, I was able to use the MAC and PCs on my network. I have a PowerGook G4 with MacOS X 10.4.10. I also have a Airport Extreme Base Station V5.6. The printer on the network that is being shared is an Epson Stylus Photo 820. Recently, when trying to reconfigure the network, I updated the software on the Airport Extreme...so I think after that, I am no longer able to share this printer using current network configuration. As information, I will share how I got the network to share the printer BEFORE I had to replace the previous Print Server and BEFORE I updated the Airport Extreme. Please see this link:
http://www.macosxhints.com/article.php?story=20050406151311940
Even though this was for a different type of Print Server, this worked for me.
When reconfiguring the new Print Server, I contacted Linksys...as had some difficulty until I found out how to assign a static IP to the new Print Server. When trying to talk to them about the Mac issue, and sharing the printer, they shared this link with me...which may be helpful to some, but I found that this does not work for me...
http://www.macosxhints.com/article.php?story=20060404021600193
I have been trying to work through the issue, but feel I may now have some compatibility issues between the Airport Extreme and the Epson printer.
Further details are that I use 10.0.1.78 for the assigned IP address for the Print server. My router (which is the Airport address) is 10.0.1.1. I have tried IPP printing option, LPD printing option...and IPP printing at least returns a status on the Print Server as "printing" as opposed to "idle". I have checked the Print status on the Mac, and I have received two (2) different error messages as to why the print job failed. They are:
"the process "picwpstops" stopped unexpectedly with status 1"
and
"the process "rastertoprinter" stopped unexpectedly with status 1"
The latter happens when I follow the instructions on the second link I attached on this topic...with the only change being that I select IPP printing as opposed to LPD printing.
Anyone that has any insight into HOW to configure the mysterious settings for Mac OS printing so that it can be compatible with a Wireless Print Server, please feel free to comment. In the meantime, I am thinking that the links above could help some people...just not me at this point given my current configuration and versions of software/firmware and perhaps the printer I am using.
Greatly appreciate your consideration, and any suggestions to anyone that might understand what these error messages mean when checking the printer status after sending a file for printing.
Thank you

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

Issues with Deskjet 5650 and Linksys wireless print server.

I have a iMac DP 1.8, a iMac G3 700 mhz running Tiger and a Toshiba laptop running XP and I am on a wireless network. I use a Linksys WRT54G router for the wireless and I am using a Linksys WPS54G wireless printserver to connect an HP Deskjet 5650 to the network. This was all working fine for the past 2 months until Monday evening when the Mac's lost connection to the printer. However the Toshiba can print to it just fine.
I cannot for the life of me figure out what happened. The iMac DP recently had a security update for intel installed this past Monday, but no updates have been installed on the G3 iMac. I have contacted Apple, HP and Linksys and they have been no help at all. Apple says it's a Linksys issue, Linksys says it's Apple issue and HP is just cluless. I would appreciate any assistance offered.
Thanks
iMac DP 1.8, iMac G3 700mhz Mac OS X (10.4.5) Linksys wireless router WRT54G, Linksys wireless printeserver WPS54G

Paul, I am amazed you were ever able to print via the Linksys wireless server on your mac. I have the identical router and print server, and only the Windows PC's on my wireless network have been able to share the printer on that wireless server. I've been unable to find a driver for my iMac, and could never get the iMac to find the server. Finally gave up and bought an HP 2600n color laser and connected it directly to the iMac via USB. You're right about lack of help from Linksys. There is an Apple folder under "unsupported" on the print server installation CD, but there's nothing helpful in there.
iMac (Intel) Mac OS X (10.4.5)
iMac (Intel) Mac OS X (10.4.5)

Linksys Wireless Print server and my Mac G4

I just set up my linksys wireless print server and it's printing from my PC just fine - not so on my G4. My printer is a Canon Pixma ip5200, and the appropriate drivers etc are installed.
I know the IP address and have tried setting up the printer via IPP (and pinged it from the mac successfully). Just no success printing. The printer utility looks like it is printing to the printer but nothing comes out.
Any ideas?

You won't be able to get this to work.
The Canon printer drivers won't allow you to connect to and print to a Canon printer attached to a wireless print server.
There is no solution, there is no way that this can work
You have three solutions.
Replace the Canon printer with another printer for which the drivers will work.
Replace the Canon printer with a networked Canon printer such as the iP4000r (or any other network printer) in which case you won't need the print server
Connect the Canon printer directly via USB to the computer to print.
iFelix

Printing through Linksys Wireless Print Server

Ok.. Here is the question.
I have a Linksys Wireless Print Server (WPSM54G) which is connected to a Canon MX700. In windows this works great. However I cannot get OS X (10.5.2) to print to the printer.
The print server (with firmware update 1017) supports IPP, LPR, and some other printing protocols.
I have also pulled down the CUPS driver from Canon's site for the printer.
At this point I am stuck in getting this working.
Has anyone out there successfully gotten this wireless print server to work with OS X?
If so, what is the trick?
Thanks.

I hope you're right about supporting the industry-standard protocols after a firmware update - because this print server didn't support those before...
With the industry-standard protocols IPP and LPD, a queue name is a part of the address to direct data to the port on the print server. Do you know the queue name (also called port name in some documents) for this print server, so you can enter it in print & fax prefs?

Linksys Wireless Print Server & HP Printer

Does anyone know if I can use my Linksys wireless print server which is attached to my HP All-in-One Inkjet printer for printing on my MacBook Pro? When I go to add a printer, nothing is detected - neither the HP or the Print Server.

I am facing the same problem too, except that my printer is a CANON. I can't seem to see the printer over the wireless network. However, when I connect the printer hardwired to my MBP, everything works fine and I am able to print normally.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

Restart your WiFi router and printer by removing power for 30 seconds.

Linksys Wireless Router Conflicting with Wireless Keyboard and Mouse?

I am getting ready to purchase a Linksys Wireless-N Router with a PCI Wireless-N Adapter (2). Will I have a conflit with my Microsoft wireless keyboard and mouse? I have two home computers that I want to set up with a wireless router. Should I use a Linksys Wireless-N Home Router or a Linksys Wireless-N Broadband Router? Which Wireless-N PCI Adapters should I use?

No you should not have a problem with the router conflicting with the wireless keyboard/mouse. They are on a different frequency all together from the wireless router.
Richard Aichner (Ikester)

Replacing a windows server with a Mac server

Hi all,
So this is a big company with about 150 employees using PC's (win xp and 7), considering replacing the current Windows server with a Mac server.
Is it possible to give users profiles once they log in like Windows server does? So when the user logs in they get to their own personal stuff? Can Mac server do that?
Can the user also get to the default printer and send prints to it regardless where they log in from inside the company?
And can the home directory to each user NOT be copied anywhere on the local machine where they log in? Meaning that after they log out there will be no traces to their files on that local PC..
Thanks a lot in advance!!

By some standards, 150 is not "big" but a large small business :-)
Regardless, please plan and test and plan some more, very carefully !
The picture for what you want to do once looked far better with 10.6 server but that had its limitations as well.
With 10.6 server, Apple was using Samba - they are no longer doing so,
but/and the version of Samba they were using only provided NT-Domain level support.
So that would not work with your Win 7 stations either. But could be made to work relatively well with XP workstations. You can no longer buy any new Mac that runs 10.6 server and 10.6 server would be hard to obtain.
Not a great route to go.
Bear in mind that the key problem with Apple's Samba was that Samba changed their licensing,
and there's not a thing in the world Apple could do to implement a current version of Samba without violating their own operating principles and the licensing requirements.
You'll be heading into heavily uncharted territory here. Odds are good that any desired domain-functionality is not going to work for you.
Honestly, Apple appears to have thrown in the towel on directory-level support for Windows,
and the best way to support Windows workstations in that regard is with Windows server and AD.
Basic filesharing works, with some caveats.
If there's no AD involved at all, then have a look at my earlier post,
https://discussions.apple.com/thread/3206725?start=47
Which worked a-ok for me but your mileage may vary.
Samba new current versions and GPL3 licensing issue:
https://discussions.apple.com/thread/3206725?start=75&tstart=0
"GPLv3 makes it impossible to provide signed binaries without also providing the signing keys. A few seconds of thought will reveal why Apple is unwilling to provide copies of the keys they use to sign system software. Part of locking down OS X security profile required removing anythign that used GPLv3.
Short version: GPLv3 is specifially desinged to be anti-company, and you are going to see a ever widening schism in the FSS/OSS community between GPL and all the other licenses, and you will be seeing less and less GPL code in commercial OSes and more BSD/Apache/&c code."
http://discussions.apple.com/thread.jspa?messageID=12494378

How do I connect to a terminal server with my mac book pro

How do I connect to a terminal server with my mac book pro

Use the Remote Desktop icon on the tray and make sure to use the Fully Qualified Domain Name (FQDN) on the 'name of server' field. If that does not work then use the IP address to connect.

Does the hp mini wireless mouse work with a mac?

Does the hp mini wireless mouse work with a mac?

The only one that will work with OSX is the one you order with the Mac Pro from Apple. The others don't have the correct firmware for OSX.
I've also noticed that the online store lets have an option for the QuadroFX 5800 to purchase with a Mac Pro
No, it's the NVIDIA Quadro FX 5600. That is the only way to get it. NVIDIA does not sell it directly.

We just moved from a Windows server to a Mac server with our Macs -problem!

We just moved from a Windows server to a Mac server with our Mac Network!!!
Problem:
Now, when we create files from our personal computers, no one else can write them. We can all read these files, but when we make changes we have to save a version! This wasn't happening on the Windows server, so I can only guess that it's a setting on the Mac? (G4 Laptop running 10.4.5)
Can anyone help me figure out what setting needs to be changed?
Thank you very much in advance!
-Alex

This is normal behavior, and is a result of the POSIX umask. Newly created files have their POSIX permissions (owner, group, and everyone fields) set such that only the owner can read and write.
The best way to solve this problem is to use an ACL entry to define desired permissions for a folder, specifying inheritance (e.g., permissions apply to this folder and any newly-created files or folders inside of that).
Please see my ACL Tips version 2 link for more information, including a more detailed explanation of POSIX and ACL permissions and how they work together: http://discussions.apple.com/thread.jspa?messageID=1732788
--Gerrit

When I access a windows files server with the mac I am adding .apple (hidden files). How can I prevent this.

When I access a windows files server with the mac I am adding .apple (hidden files). How can I prevent this?

Look for a program called BlueHarvest. I'm not sure if it still works with Mountain Lion.
I believe your file server can be set up to handle the metadata files, but I suppose that would depend on the Server software and your IT staff.

HP Director software won't work since I installed Linksys Wireless Print Server

I have an HP 5510 Office Jet all in one. It comes with bundled software called HP Director that enables scanning, printing, and faxing. The software worked fine while I had the printer connected to my pc with a USB cable.
To give myself flexibility I installed a WPSM54G Linksys Wireless G Printserver. There is no direct connection between my printer and pc anymore.
Printing still works fine. This is being handled by the Linksys software.
The HP Director no longer can find the printer. When I try to scan (for example) using HP Director, I get a message that "an error occurred communicating with the printing device...". It presumably is looking for a direct USB connection, and not finding one.
I can't find a fix on the HP site, but I imagine there must be one. Wireless print servers have been around for quite a while. Is there a download that will solve this problem?
Thanks for your help.

kts0347 wrote:
...My printer interfaces wirelessly through my print server. So, HP Director doesn't see the printer, and fails to run the tasks it is offered for - scanning, photos, faxes....
Exactly my point. These services: scanning, photos and faxes will never work through a print server.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printing to a Linksys Wireless Print Server with my MAC

Similar Messages

Maybe you are looking for