Printing to a Mac shared printer from windows 8

How can I print to a Mac shared printer (OS: 10.8.2) from my Windows 8 PC which is using the same Apple network?
Matthias

I have tried using Bonjour on for Windows on Win8 however while it finds the printer and can add it no problem whenever a job is sent to the printer a blank page is printed. The Win8 machine can print to the printer fine if directly connected and the same driver is used when printing via Bonjour so one can only assume it's a "communications" issue between the Win8 machine and my Mac Pro which is sharing the printer.

Similar Messages

WindowsXP printing on a Mac shared printer

Hi. I've seen a lot of posts on a Mac printing to a Windows printer, but not the other way around.
My wife has brought home a windows laptop and she wants to print on our Mac network. I have an iMac set up as a printer/music server with a laser printer connected to it. the iMac is running 10.3.9.
The driver for the printer is built in to XP, but when I try to add the printer, the XP machine doesn't see the shared printer.
On my iMac print server, I have printer sharing on, and Windows file sharing is on too. My Macs have no trouble seeing the printer. It is on an ethernet network, and I've tried entering the IP address of the print server with no luck.
Any ideas?
Thanks,
Mark

The driver for the printer is built in to XP, but
when I try to add the printer, the XP machine doesn't
see the shared printer.
You can't use the XP driver.
Printing to a printer on a Mac from a PC running Windows XP
http://www.ifelix.co.uk/tech/3000.html
Printing to a printer on a Mac running 10.4.x from a Windows PC using Bonjour for Windows
http://www.ifelix.co.uk/tech/3014.html
iFelix

Cannot access Mac OS Partition from windows 8 running in boot camp

So I installed Windows 8.1 Pro through Boot Camp but I can't access the Mac OS partition from windows even though boot camp partition shows up while I'm on Mac OS. I have installed all the drivers from apple but still it didn't work. Then I downloaded Paragon HFS+ which was free for windows 8 and 8.1 thinking that this would solve my problem. The instructions told me to change the drive letter for mac partition from disk management by right clicking the drive pressing "change drive letter and path" button. But the "change drive letter and path" key in grey color and I can't press it. Can somebody please help?

Here you go
1) diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         650.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data BOOTCAMP                99.0 GB    disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *645.8 GB   disk1
                                 Logical Volume on disk0s2
                                 AFC82671-CBAA-4338-BAEC-7D272EC755B1
                                 Unencrypted
2. sudo fdisk /dev/<BootCampDisk> (from 1 of the form disk0)
i typed this: sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [    409640 - 1270110576] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [1270520216 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1271791616 - 193355776] HPFS/QNX/AUX
sudo fdisk /dev/disk1
/dev/disk1: Resource busy
3. sudo gpt -vv -r show /dev/<BootCampDisk> (from 1 of the form disk0)
sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1465149167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1270110576      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1270520216     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1271789752        1864
1271791616   193355776      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392        1743
1465149135          32         Sec GPT table
1465149167           1         Sec GPT header
I didn't quite understand the 4th step. Sorry

Can't print to a shared printer on 10.6.8 iMac from Windows 7 iMac

I am creating another discussion as I made some changes and hoping PAHU-san will be able to solve this problem. I am using a Mac OSX 10.6.8 iMac and Windows7 iMac. I installed the driver Canon LBP6750 UFRII on each machine and both can print. However, printing from Windows 7 iMac to a shared printer on the Mac OSX 10.6.8 does not print anything and has no errors.
Here are some logs. If you need additional information, please let me know.
JOB INFO
Completed smbprn.00000004 Microsoft Word - Document 1 3:43PM Today 3:43PM Name
CUPS > access_log
localhost - - [01/Feb/2012:15:43:33 +0900] "POST /printers/FLOOD_6750_UFR HTTP/1.1" 401 2003 Print-Job successful-ok
localhost - lino [01/Feb/2012:15:43:33 +0900] "POST /printers/FLOOD_6750_UFR HTTP/1.1" 200 2003 Print-Job successful-ok
CONSOLE MESSAGES
2/1/12 3:47:45 PM com.apple.launchd.peruser.501[
200] (jp.co.canon.UFR2.BackGrounder[664]) posix_spawn("/Library/Printers/Canon/UFR2/Utilities/UFR II BackGrounder.app/Contents/MacOS/UFR II BackGrounder", ...): No such file or directory

PAHU, Thank you for looking into this. I have been working on this for a long time, and hoping that purchasing these two Canon printers are not a mistake. My iMac 10.6.8 is not directly connected to a printer by USB, but through protocol IPP (I have also tested with HP Jetdirect). I am doing this because I would like the iMac 10.6.8 to be a print server and have client machines (iMac 10.6.8 clients and iMac Windows 7) print through the print server. I have tried the following on the iMac 10.6.8 and have the following errors
1. Generic PostScript - prints out strange characters and prints forever
2. Generic PCL Laser -
D [02/Feb/2012:10:45:17 +0900] [Job 1] Connecting to 192.168.10.151:631
D [02/Feb/2012:10:45:17 +0900] [Job 1] Connecting to printer...
D [02/Feb/2012:10:45:17 +0900] [Job 1] Set job-printer-state-message to "Connecting to printer...", current level=INFO
D [02/Feb/2012:10:45:17 +0900] [Job 1] STATE: -connecting-to-device
D [02/Feb/2012:10:45:17 +0900] [Job 1] Connected to printer...
D [02/Feb/2012:10:45:17 +0900] [Job 1] Set job-printer-state-message to "Connected to printer...", current level=INFO
D [02/Feb/2012:10:45:17 +0900] [Job 1] Connected to 192.168.10.151:631 (IPv4)...
D [02/Feb/2012:10:45:17 +0900] [Job 1] prtMarkerSuppliesLevel.1.1 = 19
D [02/Feb/2012:10:45:17 +0900] [Job 1] ATTR: marker-levels=19
D [02/Feb/2012:10:45:17 +0900] [Job 1] new_supply_state=0, change_state=0
D [02/Feb/2012:10:45:17 +0900] [Job 1] new_state=0, change_state=0
D [02/Feb/2012:10:45:17 +0900] [Job 1] Getting supported attributes...
D [02/Feb/2012:10:45:17 +0900] [Job 1] Set job-printer-state-message to "Destination printer does not exist!", current level=ERROR
D [02/Feb/2012:10:45:17 +0900] [Job 1] Backend returned status 4 (stop printer)
D [02/Feb/2012:10:45:17 +0900] [Job 1] Printer stopped due to backend errors; please consult the error_log file for details.
D [02/Feb/2012:10:45:17 +0900] [Job 1] End of messages
D [02/Feb/2012:10:45:17 +0900] [Job 1] printer-state=5(stopped)
D [02/Feb/2012:10:45:17 +0900] [Job 1] printer-state-message="Destination printer does not exist!"
D [02/Feb/2012:10:45:17 +0900] [Job 1] printer-state-reasons=paused
3. PS v3.40 driver does not work
4. Canon Mac PPD does not work either
Do you know of other work arounds?

Having problem with printing from xp to mac shared printer (HP LJ M1005).

I have 2 printers - HP LaserJet M1005 MFP, HP DeskJet 3845.
Both are connected via USB to MacPro and shared.
I have 3 laptops - MacBookPro, IBM ThinkPad T42 (winxp) and HP Compaq nw8000 (winxp).
All these computers are connected via router.
I'm able to print from MacBookPro on both printers.
On IBM and HP I installed Bonjour service and added both printers.
Printing to HP DeskJet 3845 works fine, but HP LaserJet M1005 MFP doesn't.
What happens - When I print from IBM or HP, the job shows up in MacPro, but after 1sec status is changed to "Stopped".
I really don't understand where is problem...
I tried different drivers - Generic driver, HP LaserJet m1005 driver, some other LaserJet drivers. Nothing works...
When I connect HP LaserJet M1005 MFP directly to PC and install drivers, it works fine.

Two possible solutions.
Printing to a printer on a Mac from a PC running Windows XP
http://tech.ifelix.net/3000.html
Printing to a printer on a Mac running 10.4.x from a Windows PC using Bonjour for Windows
http://tech.ifelix.net/3014.html
iFelix

New Windows laptop fails to print to Mac-shared printer

I prevoiusly had a shared HP DeskJet 5900 shared from my PowerBook G4 to a Toshiba Windows laptop via Bonjour. The printer was set up as a generic Postscript printer and printing worked fine.
I replaced the PowerBook with a MBP C2D and the Windows laptop with a Sony Vaio, and this same printing arrangement no longer works. Setting up the printer in Windows goes fine. The Bonjour printer setup assistant finds the shared printer just fine, and set-up appears to succeed, but printing from any Windows app fails with the error message, “Printing failed because an error occurred.”
What am I doing wrong?

…On the VAIO, are you still creating the
printer as a Generic PS? I've seen problems when you
add the Windows driver for the printer instead of
setting it to PS (the Mac does the conversion so it
is recommended to leave it set this way).
Yes, it’s Standard/Generic Postscript, although I also tried setting it up with the appropriate printer-specific Windows driver with the same result.
It might be worth checking Console in the MBP to see
if there is a better explanation as to what is going
wrong. The cups error log may be helpful (providing
the spool file is getting to the MBP).
Good idea. Unfortunately nothing shows up on Console. I suspect the connection is failing entirely on the Windows end.
However, the connection does work on the file-sharing level. In a Windows Explorer window, I can successfully browse \\[Mac name]\ and see the printers as well as shared files

Officejet A909a prints from mac but when from windows "out of paper" message appears.

I have an older 8500 which has been very loyal to me and I have looking after it well, which is now pushing 4000 pages. However i went to print a file from my Windows 7 PC yesterday which is connected via usb, and it wouldnt print saying it was out of paper (which it wasn't) about half full . So i tried again no luck. UN-installed then reinstalled the printer still noting. went to my work laptop (windows 7) which is connected wirelessly through the network, same again "no paper" message appears. i thought this is strange turned it off back on still nothing even after disconnecting it from the mains for a few minutes, nothing the same message still appears.
However, my son has a mac book pro and he just printed his coursework off the printer effortlessly through my network. so i know the printer is fine especially as i have now printed self test pages off through the printer itself.
I have no idea what to do now, as i have tried uninstalling then installing, printing via usb and network. and when i say "out of paper" i mean the printer receives the print command from my computer as it tries to feed paper a few times but cant pick it up also i have tried with various paper levels in the printer (full, half, about 20 pages, 1 single page)
Please help.

Hello @Dangerous97,
I understand that when printing from your 2 Windows 7 computers you receive an 'out of paper' message after your HP Officejet Pro 8500 All-in-One Printer struggles and fails to pick up paper. However, you are able to print from a Mac computer. This is very unusual behaviour! I would like to assist you today with resolving this issue. Also, thank you for including that you are able to print self-test pages from the printer with no issues as well.
Generally, 'out of paper' messages are caused by a hardware issue with the printer itself. Because you are able to print standalone to your printer and from a Mac, there may be an issue with the documents that you're trying to print from your Windows 7 computer or a programming issue with your printer.
With that being said, to start I would like you to click here to download and install the latest programming Firmware Update on your printer. Once the website opens select the Download button on the top left. Once the download is complete, please follow any onscreen instructions to send the update to your printer.
Once the Firmware has been successfully updated, please test printing again.
Please respond to this post with the result of the Firmware Update. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Windows XP can't print to my Mac's printer?

Why not? I have Printer Sharing enabled, and printing is fine with my Mac.
What do I need to do to fix this?
My printer is an HP DeskJet 932C.

Two options.
Printing to a printer on a Mac from a PC running Windows XP
http://www.ifelix.co.uk/tech/3000.html
Printing to a printer on a Mac running 10.4.x from a Windows PC using Bonjour for Windows
http://www.ifelix.co.uk/tech/3014.html
iFelix

Printing on my mac whilst connected to windows 2003 remote desktop connecti

Hi, please can somebody help. I have a MacBook Pro and i am connecting to a windows 2003 server using microsoft remote desktop connection. I need to print on the printer connected to my mac. How do I get windows to see the printer that is connected to my Mac?

Hi, please can somebody help. I have a MacBook Pro and i am connecting to a windows 2003 server using microsoft remote desktop connection. I need to print on the printer connected to my mac. How do I get windows to see the printer that is connected to my Mac?
It looks like you have to have a postscript printer (i.e. a laser printer). I have been trying to solve this problem for some time with no luck so far.
Dual 2 ghz G5 Mac OS X (10.4.8)

PDF print driver hang when pasting filename from Windows Clipboard

This is consistently reproduceable on my Win 7 64-bit machine, running Acrobat Pro 9.3.1 (Creative Suite 4) and Firefox 3.6.2. There are no version properties available for the Adobe PDF Converter print driver, when I inspect it via Control Panel.
- copy something (i.e., a filename) to the Clipboard
- in Firefox, choose File > Print > choose the Adobe PDF print driver
- I am prompted for the Adobe PDF filename
- when the Save As dialog displays, click in the "Save PDF File As" filename field, and press Ctrl+V.
Firefox and/or the Acrobat PDF print driver are now hung/crashed; you must kill them via Task Manager.
If you restart Firefox and repeat the above steps, but typing in the filename instead of pasting it, everything works fine.

Hi,
First please make sure your Office is up-to-date.
I suspect this may be related to some 3rd-party add-ins or the security software, first please run Outlook in Safe Mode to determine if 3rd-party add-ins are related:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem copying and pasting in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
Please also disable the anti-virus program temporarily to check if this makes a difference.
Regards,
Melon Chen
TechNet Community Support

Problems printing Acrobat documents on shared printer

I have a MacBook Pro and a Mac Pro. I also have an Epson 1400 printer.
When I print any Acrobat document using the printer hooked up directly to my MacBook, it prints perfectly.
When I print the same Acrobat document using the printer hooked up directly to the Mac Pro, it prints perfectly.
However, when I hook the printer to the Mac Pro and enable printer sharing, and then print the same document from the MacBook Pro using the shared printer via the network, the Acrobat document is reduced in size by around 50%. I have checked every possible setting and just can't find why this is happening.
Thanks in advance for any help!

The problem occurs not only through Acrobat. The prints have the correct size through the Mac only when the printer is directly connected via USB on the Macs but reduced size through the network. The problem occurs in any printer model on the network.
I do not know how to solve this problem but curiously does not occur with Windows computers with Bonjour that prints to the printers connected to Macs.
When Apple will fix this?

Printing thru an XP shared printer???

Okay, here's the setup...
Airport extreme network.
Powerbook G4 connected via wireless.
Windows XP tower connected via ethernet cable.
HP Officejet All-in-one connected to the XP tower.
I want to be able to print from my wireless Powerbook, thru the XP tower, to the HP all-in-one printer. But when I installed Bonjour for Windows and connected the HP all in one to the USB port in my Airport Extreme, I lost the ability to Scan. Seems the HP all in one need to be hard wired to do that.
So I reconnected the Printer to the back of the XP Tower and turned on the XP printer sharing. Went to my Powerbook, chose the "Windows Printer" driver option and found the Windows network. Connected to it and did a test print (safari apple page).
It printed all right... printed about 10 pages of gobbledygook. Lines and lines of random letters and numbers.
Does anyone know how I can get the powerbook to print to this HP without unplugging the USB cable from the XP Tower?
Thanks in advance.

By God, it worked!
I went to the link...
http://www.linuxprinting.org/macosx/hpijs/
Downloaded and installed the file called "espgs..." first. Then downloaded and installed the "hpijs..." file. Made sure the XP printer was in Share mode, Rebooted my Mac, and went to "add" a new printer in the Print Setup Utility. Choose "Windows Printing" and selected the XP Network.
There was just one extra step that made all the difference...
In the Printer Browser, I double-clicked on the newly added driver (in this case it used the XP network name "HPOffice") and changed the Driver type from "Generic" to "HP" and found my printer model. Once that was done, it printed beautifully thru the Airport Extreme, thru the XP tower, to the USB HP all-in-one.
Thanks a million, Greg!

MacBook - Newbie: Need help on printing wirelessly to XP shared printer

MacBook - Newbie: Need help on printing to XP shared printer
Bear with me please. I read tons of articles on this but somehow as a newbie to MAC (girlfriends sick daughter), I am missing something. 10.5.2
Currently, she can print directly if we plug in the HP Deskjet printer directly via USB to the MACBook. No problem.
When we first got the MACBOOK I tried setting up the MACBOOK wirelessly to recognize the workgroup where the printer was attached via USB to the Windows XP PC. However it printed out garbage since I did not know there was a difference between XP printing and MAC (Gutenberg/gimp printing/drivers).
Now I know there is a difference.
But in reading various instructions, I no longer can find how to connect the MAC to the Windows workgroup. Note we do have a printer set up currently as USB-HP Deskjet on the Macbook (not sure I need to delete it yet).
I went to System Preferences on MACBOOK and clicked on printers, more printers. In the drop down box was CANON, APPLETALK, IP HP printing and Firewire. There was no WINDOWS selection as I saw in other online web instructions.
So not sure how to proceed to find a way to:
1. Connect to Windows workgroup (click on what exactly), step by step please!!
2. Add correct HP Deskjet 5490 printer (perhaps there is one with Gutenberg or perhaps I need Gutenprint-really not sure what I am talking about)
Thanks so much in advance. Fiancé's kid has had her cancer recur in a different place and someone was nice enough to buy her a MACBOOK as a gift.
Sincerely
Peter

ccarbery wrote:
OK...I figured it out...no need to reply. I noticed that there was another Protocol to use to set up the printer on the Mac, I was using LPD, so I switched it to HP Jet Direct-socket, and it prints fine...thanks. I am curious as to why LPD wouldn't work; if anyone has that answer I would like to know...thanks
Any chance of posting the Protocol you used to connect to your printer with your laptop? I'm have the exact same problem printing from my MB. Same error message "..is busy".

Printing dark when using shared printer

I am having problems getting Lightroom 2 to print correctly when printing to a shared Epson 4000.
When printing to the 4000 as a local printer everything works as it should. But when I try to print to the same printer, with the same settings as a shared printer in a small network the prints turn out too dark and with colour casts.
Using epson profiles and pointing lightroom to the correct profile. Setting printer driver correctly (when i print the from photoshop CS2 it prints correctly, even when using a shared printer).
Epson 4000 using the latest 3.09 driver. OSX 10.4.10 on imac G5.
Any help appriciated, strange that everything works great on a local printer but not on the same printer when shared over the network (printersharing in OSX)
Am certain I have profile selection and printer driver settings correct ( after all it works from photoshop and locally).

Dear Larry,
Thanks for reporting the problem. You mentioned that page content is getting shifted by around 3/8 inches when printed using Mac Airprint using Acrobat which resulted in clipping of some of the content and other applications print fine.
Could you please pass on the same pdf to me as well? Although, it doesnot look dependent on any particular pdf but I would like to analyze certain behavior with the pdf you are using.
Please also confirm that you have not printed with "None" pagescaling option when you observed this.
Thansk,
Atul

Install printer driver for a shared printer MP520

Hi,
I need to install the Canon MP520 (http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=116&mo delid=15483) printer to my MBP. The printer is connected to another a mac running OSX and is shared. I installed the OSX driver provided on the Canon page and I can see the shared printer in the network printers but when I am asked to choose the driver I can't see the correct model listed.
On the other hand, if I simply connect the same printer via USB, to my MBP it is recognized directly.
When I'm asked to provide the driver while adding the printer via the network, there is also the option to browse to the driver location. So my question is, where are the can I find the right driver on the OS ?
Thanks in advance ,
Tex

Reading your first post it sounds like the method you used to connect to the shared printer may have been incorrect.
When a Mac is sharing a printer, to add this printer on another Mac, you select the Default browser view. You should see the printer name followed by Shared in this view. When you select it, there should be no requirement to browse for a printer model. The queue should just be created with minimal driver options.
If you want to have all the features of the MP520 available to your Mac, then you need to install the same driver on your Mac as what is being used by the Mac sharing the printer. Check this carefully as Canon offers two drivers for Mac OS X and you can also use the free Gutenprint driver set for the MP520. If you open System Preferences > Print & Fax on the sharing Mac, select the printer in the list and look at the Kind section of the right hand pane, the driver version will be displayed. With a bit of luck the driver that was used to install on this Mac might still be available so that you can install it on your Mac.
Note also that you don't have to add the printer queue to your Mac to print to a shared Mac printer. From the majority of applications, when you select to print, you should find a Shared Printer option in the print dialog > Printer menu. This can be beneficial if you don't have a requirement to add this printer to your list, such as when you are visiting someone with Mac's. This doesn't sound like your situation but wanted to make you and others you read this aware of this fact.
PaHu

Printing to a Mac shared printer from windows 8

Similar Messages

Maybe you are looking for