Printing to a windows shared printer (Epson Photo 1400) on a AD Network

Looking for help with printing to a windows shared printer but I believe I need instructions for a domain rather than a workgroups??? Trying to print to a windows shared Epson Stylus Photo 1400 from a Mac running OS 10.4.11. Sharing works fine to other PC's an a network using active directory. (there is no workgroup, and I guess there can't be in the way the network is administered) The "address" used on another pc to print to the shared printer is \\111408nw.

Hi dlori, and a warm welcome to the forums!
I think these may help...
http://discussions.apple.com/thread.jspa?messageID=4776616
http://blog.case.edu/djc6/2005/06/22/printingfrom_os_x_104_to_windows_printer_on_activedirectory
http://www.afp548.com/article.php?story=20070108171607985

Similar Messages

Printing to a Windows Shared Printer in Windows Domain Stopped Working

If anybody can shed some light on the problem below I would be highly appreciative. I have tried every suggestion I've found on ways to fix this problem, including postings found on this forum, without success.
I use able to Print to a Shared HP Laser Jet printer one a Windows 2003 Server machine, which is part of a Windows 2003 Domain. It has been working faultlessly until about a 2 weeks ago. I have had a number of errors including unable to Connect but the Error I get constantly now is:
+Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY"+
I have reset the password of the windows user that originally made the connection when the computer was set up and this password had special characters. After reading various posts I have tried:
1. Reseting that users password without special characters, deleting the printer and adding it back in using the same user and the new password. The same user can map and connect to windows Shared Directories on the same Server and open and edit files
2. I have reset the Keychain to make sure it was using the new password. Again deleted and re-added the printer.
3. Created a new user both on the domain and one the print server deleted and re-added the printer using each user while also reseting the key chain
4. Tried the Advance option on the Printer Setup Utility using the following SMB URL format,
smb://user:pass@Domain/Machine/Printer where, the domain is called "home", the machine name is "Devserver01" and the printer share name is "HPLaser" resulting in a smb URL of smb://shanep:xxxxx@Home/Devserver01/hplaser.
None of the above work!
So as a new MAC user I have absolutely no other ideas of where to look for additional information on what is happening i.e. where do you look for log files that may contain additional detail.
Can anybody assist on suggesting any other things to look for or check?
Thanks
Shane

Hi Greg,
Thanks of the tips. I have just managed to get it working and I didn't use the LPD method but tried a few different smb URI's.
Here's what I found worked.
1. I created a standard user account on the Windows 2003 server on which the printer is connected and shared, i.e. a non Domain user name that is local to the server only and not the domain
2. I then used this user name and password, along with the IP address of the server in the URL i.e.
smb://user:password@IPofserver/hplaser.
3. Printed a test page successfully
I then tried variations of a theme using username and passwords on the domain, changing the @workgroup/server/printer with no success.
I could however replace the IP address with simply the @Server/Printer combinations using he local user name and password successfully.
I also installed apple and Unix printing and file services so whether this made the difference I'm not sure.
Interestingly I tried to add the mac to the LDAP/Active Directory and couldn't successfully bind to the directory. Not that I'm an AD expert, but I have configured a few Java applications to use LDAP/AD authentications and groups of late so this problem is a little unusual, but that aside, thanks for the pointers, Printing problem solved. now to solve the AD one
Shane

Printing to a Windows shared printer via SAMBA

I'm trying to setup my mac to print to a printer shared via a Windows PC on my network. I have gone into system preferences / print&fax and added a printer, used the "Advanced" settings on the toolbar, chosen SAMBA and entered the address of the printer as smb://IPADDRESS/printername
When I try to print to this printer, it asks for a username and password. I enter it and then the document briefly appears in the printer queue and then disappears as if it has printed successfully. The document however never appears in my Windows printer queue or actually prints.
CUPS does not return any errors in the CUPS log file. CUPS actually says the printer is idle and accepting jobs.
A friend can print from a windows PC to the printer by using the address \\IPADDRESS\printer name in the manual windows printer setup (the printer does not show up in the browser).
I can also connect to the computer using Leopard's built in SAMBA networking by accessing smb://IPADDRESS so I know the server is active on the network and my username and password work.
Does anybody have any ideas why I am not getting an errors and it's still not working?

Well, that isn't too useful. Try this instead: Adding a printer shared by a Windows computer via SMB/CIFS.
You may find more by selecting Mac Help from the Finder's Help menu and searching for articles by keyword.

Printing to a Windows shared printer, keep getting "Hold for Authentication" when I'm on the Windows shared network and can browse the computers.

I have had two MacBook Pros now, and this has been an issue in Mountain Lion and Mavericks. I've got a shared printer on the local Windows network (it's a USB printer shared via the network and the computer), and the other Windows computers in the house can print to it no problem. The Mac sees it no problem, yet whenever I try to print to it, I just get "Hold for Authentication."
Like I said, persists over Mountain Lion and Mavericks. No other computer in the house has any issues printing to it. I've installed the drivers for the printer as well (Brother HL-2240).
I've tried to follow the instructions here: https://discussions.apple.com/message/23268762#23268762 but the printer isn't listed in Keychain Access.
Any thoughts?
Thanks in advance!
Patrick Campanale

Well, that isn't too useful. Try this instead: Adding a printer shared by a Windows computer via SMB/CIFS.
You may find more by selecting Mac Help from the Finder's Help menu and searching for articles by keyword.

Can't Print Wirelessly To Windows shared printer

Hi. I recently purchased a macbook pro and I am having trouble printing. My printer is an HP Photosmart 2600 series, and it is connected to a windows xp computer. I have tried pretty much everything. My printer is found on the mac, but when I try to print, "Connection failed: NTSTATUS_CONNECTIONREFUSED" shows up. Please help.
Thanks

The network host busy message can be a result of using the wrong IP protocol for the print queue, or having incorrect information.
Many users select the IPP protocol, as it is the top item in the menu. IPP often requires a particular queue name, such as ipp, and it is not always a supported protocol by printers. So a suggestion would be to remove this queue and create it again, this time selecting IP > LPD or IP > HP Jetdirect for the protocol. The later is preferred, as it requires no specific queue name and will be the default print protocol being used by Windows.
The other suggestion is that the IP address being used is not the printer but a Windows print server. You can confirm if the address is correct by typing it into your web browser. If this address is the printers then it will open its internal web page.

Trying to connect to a printer through a windows shared printer

I have two printers connected to a Windows machine. On that machine I have shared both printers. A Brother and a color HP 3600N. When i go into print setting and try to set them up I can see both.
I connected to the Brother Printer and it is working fine.
I tried to connect to the HP 3600N but the print driver was not available for that machine. I went to HPs web site and downloaded the driver and did the install. I rebooted and tried again. Still the HP 3600N driver was not showing up.
I tried using two other print drivers the 3500 and the 3700. With both I was able to "connect" to the printer, but the printer only printed garbage.
In order to make sure the printer was working with the Mac. I disconnected it from the PC and directly connected it to the Mac. It found it immediately and the 3600N driver appeared...the printer worked fine.
I then disconnected it from the mac and reconnected it to the PC...rebooted etc.
Then i tried to find the printer again. Once again that print driver 3600n was not available.
How can I over come this. I need to have both printers connecting to the PC for now
Thanks
Mark

Look at the printer sharing instructions on the invaluable iFelix Tech Notes site.
If problems persist, check System Preferences -> Sharing -> Firewall -> Advanced and if necessary clear/uncheck the options to block UDP traffic and enable stealth mode; as long as you're behind a NAT router, those options aren't essential. Windows does seem to put out a slew of UDP traffic, and I've found that blocking UDP/enabling stealth mode block my home eMac from seeing the Windows machine to which a shared HP printer is connected.

How to add a Windows shared printer

I was doing everything that Article: HT3049 was saying but i still couldn't print with my windows shared printer from my mac , finally I found out another way, so for those of you who that having problem you can do the steps below:
On the Windows 7 PC
1. Go to Control Panel
2. Select "Programs and Features" panel
3. Click "Turn Windows Features on or off"
4. Click on the "LPD Print Service". Under "Print and Document Services"
5. Ensure printer(s) are shared
On the Mac
1. Open "System Preferences" - "Print & Fax"
2. Click "+" to add a printer
3. Right hand button tool bar to customize and add "Advanced" button
4. Select "Advanced"
5. In the "Type:" field select "LPD/LPR Host or Printer"
6. In the "URL:" field enter lpd://IPserver/PrinterShareName; (e.g., lpd://192.168.1.102/samsung)
Using lpd://ServeName/PrinterShareName does not work, the IP address must replace ServerName
The IP address is the address of your PC, the one assigned by your router
7. Click the "Add" button
enjoy!:)

I had to download the driver for my printer. Depending on the printer you will have to go to that site. In the search engine type 'mac os driver (model printer). I have a dell wireless. After that I went to printers/faxes and hit the + sign and my dell printer was there to add. Hope this helps a bit. I actually just did it today.

Netgear WNDR3700, Tp-Link WPS510U, Epson Photo 1400 and PowerRIPX: wireless connection

Hi All
I need some advice regarding a wireless connection to my inkjet printer.
I have recently replaced my router with a Natgear WNDR3700 dual band device (2.4G and 5G). Connected and working wirelessly are my MacBook Pro, iPhone, Zeppelin Air, smart TV. Connected and working wired are my satellite modem, VoIP ’phones and laser printer.
However, I have an Epson Photo 1400 with a Tp-Link WPS510U which isn’t working. It worked with the old router.
Netgear’s Genie application shows the printer to be available under AirPrint.
The printer driver I use is PowerRIPX PostScript.
The TP-Link has the correct IP address from the previous configuration (192.168.1.10).
Printing shows the document processing in the print queue, but there is no flashing green LED on the front of the printer and no output results.
So … how do I actually get this to work? Advice gratefully received.
Cheers
Paul

Photoshop CS6 is not recognizing my Epson Photo 1400 printer...how to fix?

I cannot print anything from Photoshop CS6. When i try to print any / all types of files from Photoshop CS6 to my Epson Photo 1400 printer, I get the following error message:
"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."
I can print all / anything (.pdf .tif.png, etc.) from ALL other applications-except from Photoshop.
I only have one printer and it is recognized in my System Prefs.
I have OS X 10.9.2 (13C64) and Photoshop 13.0 x64
What to do....?
Thank you in advance!!!

Hi Chris,
I have the current version of PS and the most current printer driver. I deleted the Adobe CS6 Prefs.psp file and relaunched PS. I actually got closer this time, it looked like i could print but then i got this error message: ColorSync color matching may produce different results than printer color management. Either Photoshop color management or printer color management is recommended. I clicked Ok , the print preview window no longer showed my document and when I went to hit the print button, the original error message came up again. I go to File / Print and Print is no disabled (grayed out).

Printing to a Mac shared printer from windows 8

How can I print to a Mac shared printer (OS: 10.8.2) from my Windows 8 PC which is using the same Apple network?
Matthias

I have tried using Bonjour on for Windows on Win8 however while it finds the printer and can add it no problem whenever a job is sent to the printer a blank page is printed. The Win8 machine can print to the printer fine if directly connected and the same driver is used when printing via Bonjour so one can only assume it's a "communications" issue between the Win8 machine and my Mac Pro which is sharing the printer.

Accessing Windows shared printer, no GIMP driver for Canon iP3000. Options?

I checked a few pages worth of threads but couldn't find a solution to my problem.
Finally accessing my Windows shared printer. I have a Canon iP3000 and it doesn't print when I use the generic driver. I tried selecting the GIMP "Canon BJC 3000" driver but the prints end up shrunken to about a quarter of the paper size (8.5"x11"), my paper was set up and configured correctly. Any options for correcting this?
I had planned on connecting the printer to my MacBook Pro but all the support I could find was for sharing from Windows, so if anyone knows a good resource for such a setup, that'd help too.

There are new versions of Gimp-Print, now called Gutenprint, coming out on a regular basis. Check if the latest has your model:
http://gimp-print.sourceforge.net/MacOSX.php3
To share from a Mac:
http://www.ifelix.co.uk/tech/3012.html

Can't see windows shared printer

Hi,
Just joined a small company that is all windows based. So if I want to keep using my Mac, I need to resolve a couple important issues. One of them is printing to the office printers. The office is set up to use a PC running windows 2000 connected to the printers in question. The printers are all shared by this PC and everyone accesses them through.
The problem I am having is that when I go through the printer utility and select more printers, I can find and connect to the designated PC for printing. However, after connecting to it, there are no printers visible to select for setting up.
The printers that are highest on my list are an HP1300 and HP5000. I believe the HP1300 is connected via USB.
I saw the post mentioning potential problems with the drivers and to get hpijs.
But is that the reason I can't even see the shared printers?

drmoque wrote:
...But is that the reason I can't even see the shared printers?
No. While you will need the hpijs, Foomatic RIP and Ghostscript software to print to the USB shared printer, they are not needed to see the shared printer.
When you opened (double-clicked) the Windows 2000 print server, were you prompted to authenticate? If you didn't authenticate, then this could explain why the shared printers are not being displayed, as you are probably connecting as a guest and this account has no access to the printers. You will need to ask for an account to use, or have one created for you so that you can see the printers.
The other thing you may need to check is if the 2000 PC is part of a domain rather than a workgroup. If it is a domain, then the account name that you use to authenticate to it has to include the domain name, such as domain\accountname.

How to print on Windows Shared Printer

As I search in Google I found that there are many question about hot to print on windows shared printers. This is the way....
Before you add your windows shared printers in you Mac, sometimes you can not find your printer driver. The only way is directly connect your windows shared printers to you Mac, and connect your Mac to internet. After that your mac will automatically download printer driver. Now you have to add windows shared printers to your mac (this is part is easy..I'm not going to explain this...), and after you select the right driver you still can NOT print to windows shared printers ? You already have user & password for PC that connected to the windows shared printers...but nothing happened in your printer...
Soooo.....
All you have to do is :
1. Go to system pref on mac
2. Click on sharing - thick on "file sharing"
3. Go to "option" and then thick on "share files & folders using AFP" & thick on "share files & folders using SMB (windows)"
4. Dont forget to thick on you account name below...
5. You're good to go...
6. Please note that you have to know the PC Windows user & password that connected to the shared printer.

Hello Greg & Hello PAHU...
Yesterday everything is fine for printing to windows shared printer. But after I update my XP, problems came up again....
And thanks to your link Greg, you are absolutly right about the driver...the problem is the driver...
And your link is solving my problem (until know....) and you are right too PAHU, without thicking File Sharing feature in my Mac, I still can printing with windows shared printer...
And with this reply I admitted that my information above maybe wrong, and the real solver to my problem is to install gutten-print driver :http://gimp-print.sourceforge.net/MacOSX.php
Thanks guys you're the best...now I live happily with my MBA

Print to Windows Shared Printer from Mac on wireless network

My set up is: HP Deskjet 1050 410 USB to a WIndows 7 PC. The PC has 4 users, each password protected for login and public (not protected) folders. The Macbook is running OS X 10/6/8. I have downloaded the latest HP drivers.
I found the printer on the workgroup network and installed it as the only printer on the Macbook. When I send a job to print, I am prompted to either login as a guest or as a user with a password. Either way, I get an eror message "On Hold (Authentication required)" Under Job Info is the following message "NT_STATUS_INVALID_PARAMETER"
THis is an improvement over what was happening before when I could not find the printer in the list and had to manually use the IP address. Even then, I could not print, I would get a communication error.
The first time I installed the printer driver (an earlier driver and earlier release of OS X 10.6) I had no problems printing from the Macbook. It found the printer and printed without any password authentication. Nothing has changed on the PC, the printer is shared with all users on the network, but I can't seem to print.
I noticed many postings with similar issues but I did not see any resolution. Help! (Thanks!)

hey just want to say thanks to you guys... I just this week switched to Mac after 14 years of heavy PC use. Mac's been awesome except for that I couldn't print to my PC based printer... now I can... and I couldn't of done it with out this apple discussion thread about HPIJS.

Windows Shared Printer - Problem adding: Error 256

Getting error 256 (username and password) when trying to add a windows printer connected to the LAN which is shared.
Any clues to the proper method of doing this?
Beavis2084

Unfortunately, I think several things can cause that
error. Please try the Advanced Windows Printer via
Samba technique:
In Printer Setup, click Add, then hold the option key
and click More Printers, select Advanced from the
bottom of the first menu, select Windows printer via
Samba. Enter the URI like this:
smb://usernameonPC:password@[IP address of
PC]/printersharename
I have tried your suggestion but no success. To be clear, I used my Windows XP login name for "usernameonPC" and my server name for "IP address of PC" and my printer pool name for "printersharename". Was this right?
I read elsewhere that I should turn on "Sharing" functions on my PC, which I tried. I also read that I need to make sure I have a "network account" which I tried. Nothing is working. Pretty frustrated now. Thanks for your help. Is there anything else I should be trying?

Printing to a windows shared printer (Epson Photo 1400) on a AD Network

Similar Messages

Maybe you are looking for