Printing to a Windows shared printer, keep getting "Hold for Authentication" when I'm on the Windows shared network and can browse the computers.
I have had two MacBook Pros now, and this has been an issue in Mountain Lion and Mavericks. I've got a shared printer on the local Windows network (it's a USB printer shared via the network and the computer), and the other Windows computers in the house can print to it no problem. The Mac sees it no problem, yet whenever I try to print to it, I just get "Hold for Authentication."
Like I said, persists over Mountain Lion and Mavericks. No other computer in the house has any issues printing to it. I've installed the drivers for the printer as well (Brother HL-2240).
I've tried to follow the instructions here: https://discussions.apple.com/message/23268762#23268762 but the printer isn't listed in Keychain Access.
Any thoughts?
Thanks in advance!
Patrick Campanale
Well, that isn't too useful. Try this instead: Adding a printer shared by a Windows computer via SMB/CIFS.
You may find more by selecting Mac Help from the Finder's Help menu and searching for articles by keyword.
Similar Messages
-
i keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?
apple_master New Delhi, India
This solved my questionRe: Unable to Purchase
Apr 16, 2012 10:22 PM (in response to eight4seven)
This worked for someone
I had this problem for about six weeks. I was following this forum but was too unsure of what might happen to try the fixes that were suggested.
About two weeks ago I decided to delete the downloads.28.sqlitedb file (usingDiskAid(a free program), on a PC running Windows 7). The original downloads.28.sqlitedb was 936 KB. The new one that the system created is 80 Kb., and has stayed at about that size. After about four days I also deleted all the other contents of the Download folder. Ten days later and still no more problems. Downloads are much quicker, nothing greys-out (as was happening frequently before).
Everything has worked well since with no more error messages.
I am using an iPod 4G, iOS 5.1 (originally iOS 5.0). I do not have a manifest file, and as far as I know, have not had one. DiskAid can search the whole "hard drive" on the iPod.
Deleting downloads.28.sqlitedb and the contents of Downloads worked for me. -
Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?
wmv is a Windows Media format. I don't know why Realplayer is coming into it since that deals primarily with Real format files and maybe a few generic formats.
You need
Free Flip4mac QuickTime player components - http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
After installation a new Flip4Mac pane will appear in System Preferences. Make sure you set the boxes to ensure that it will play WMV files in Quicktime.
or play the files with VLC
VLC media player - http://www.videolan.org/vlc/ - general media player that plays just about anything.
While you're at it you might install:
Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
Perian doen't do WMV but it's handy to get many things to play in Quicktime.
Note, if these are protected WMV, nothing on a Mac will play those (unless you also have Windows installed). -
Ever since the Itunes update, I keep getting an 4000 error when trying to burn my music to disc. How do I fix this?
Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever. -
Keep getting error message 4310 when trying to burn music from playlist onto CD. How can I fix this for free?
You can use the email form here > Apple - Support - iTunes Store - Contact Us
iTunes Store & Mac App Store: About your Apple ID and password -
I keep getting a server error msg when I try to sign into Icloud..Any suggestions?
Yep. Tried that. And just did it again.
Still no joy. -
I keep getting an error message when I try to do facebook sharing?why
What is causing the error message I get when trying to share with facebook?
Also try renewing your iPhoto preferences -
A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
LN -
does anyone else get this error message?
Hi ..
Try here > iTunes Store: "Error (-50)" when downloading purchased content -
I Get error message -3221 when I try to connect to iTunes store and can not connect
I had just updated iTunes when I started getting -3221 message and unable to connect. I show my firewall allows iTunes but Can not figure out why it is not working.
have a look at:
Possible iTunes Store errors
iTunes: Advanced iTunes Store troubleshooting -
I keep getting an error message when trying to download itunes. It says it can't find "msvcr80.dll, but when I search for it on my computer it is there. My itunes was working just fine before I got the message to download the latest upgrade. I've not had any problems doing that before now, so don't really know what to do.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
can any anyone help i have been trying to install itune's onto a new computor with windows 8 i keep getting an error #2324.i also tried to unstall itunes,quicktime etc. and get the same message please help!!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
My Thinkpad T60p can't go to desktop after the Windows logo, it has fingerprint, but never appears, only the cursor stays here and can move, the back ground is not black, nothing happens pressing Ctrl+Alt+Del or Win button.
Can go to safe mode but the same situation, the cursor is here, black background, nothing happens pressing Ctrl+Alt+Del or Win button.
After a long time of searching I guess the very most possible reason is system updating many patches guided by a software that lead me did that.
Thanks!
Dan
Link to image
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation RulesIf I was given this laptop to diagnose the first thing I would do is swap in another harddrive and confirm all the hardware works. If you don't have another drive to boot from you can use a Linux live-cd, it'll pretty much tell you the same thing and if the laptop works, your solution would be to either fix your operating system or reformat and start over with a new installation.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram) -
Why do I keep getting "Connection failed: NT_STATUS_BAD_NETWORK_NAME" when trying to print on Windows networked printer over wi-fi?
If I run the following (on the machine I'm trying to set up the share)
smbclient -L localhost -U%
I got the following output
Connection to localhost failed (Error NT_STATUS_CONNECTION_REFUSED)
so I thought it might be something incorrect with the iptables side of things, however I haven't really touched that at all and it seems to look correct
iptables -nvL
Chain INPUT (policy ACCEPT 667 packets, 79977 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 157 packets, 20724 bytes)
pkts bytes target prot opt in out source destination
So from my (very little) knowledge this appears correct (I think)... However it appears that something is blocking access somewhere. -
Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message Can't install the software because it is not currently available from the Software Update server. Please help.
Installing an HP network printer
Maybe you are looking for
-
How many frameworks available in Java?
How many frameworks available in Java? Which are most commonly used? Edited by: Passion on Jun 16, 2008 2:50 AM
-
Unable to use Adobe 9 Pro with Office 2010
The year is 2012 and Adobe still has not resolved issues with beinga able to use the features I paid them for. Specifically the ability to retain metadata, hyperlink the TOC and maintain other links when converting an Office 2010 Profesional document
-
View and change passwords for sys, system, sapr3
Dear All 1.I need to view the password the for account : sys, system, sapr3 2. I need to know for how long passwords have not been changed? . and how can i change these passwords? Any sugestions?? Regards Rajesh Edited by: rajesh sharma on Oct 15, 20
-
Quicktime won't open files; gives Error -43 message.
Whenever I try to open file with quicktime I get an error message reading: "Error -43: a file could not be found (files name)" I have tried re-installing and repairing quicktime. Any suggestions? I am runnig windows Vista.
-
Hello, all the documents in all the folders have been disappeared. Especially documents on desktop. I have not install or remove anything. Do you know the reason? What should I do?