Printing to AEX connected printer fails after printing from WinXP

I have an HP Laserjet 1010 printer connected to my Airport Express Base Station. Setting up the printer on my iBook and my PC (WinXP and Linux) worked fine.
But everytime I printed from WinXP I have to restart the Base Station because I cannot print anymore. After restarting it works again. This happens only after printing from WinXP.
The firmware of the AEX is V6.2.

Firmware Version:
4.0.16.1.56.0.10.14.4
Model Name:
MI424-WR
Hardware Version:
D
Again - it's a verizon router. For the record, I kept the printer turned off all day - while I was at work. I came home, I rebooted the router twice. I looked in the table, I renamed the epson printer that was in there (marked inactive). I renamed that to "notonet". It was the *.8 ip address. I then restored the printer to factory settings. I set the printer back up on the net. It retook the *.8 ip address - in the router table - the name was just "notonet". So I renamed it back to Epson - it didn't really change anything.
Now, all devices see the printer and can print. But - soon - it will disappear!

Similar Messages

HT4356 I have an Epson sx235 stylus printer but cannot connect it to Air print, any suggestions?

I have an Epson Stylus SX235 printer but cannot connect it to Air print, any help with this would be apprecated

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
You can print to a USB printer connected to your LAN or computer by installing/activating Ait Print on a PC or Mac.
Activate AirPrint on a Mac;
http://netputing.com/airprintactivator/
Install AirPrint on a PC;
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/

Problems printing to printers connected to a MAC pro from a Windows Laptop

Folks,
I got a MAC PRO a couple of weeks ago and I have two USB printers (an EPSON CX 4200 and a CANON S900 connected to it).
I tried both Ifelix's procedures to add the printers connected to the MAC and I had problems with both procedures.
If I try the http://mac-ip:631/printers/printer-name I am successful in adding the printer to the Laptop running windows XP however when I try to send something to that printer the job goes straight to the "completed" queue on the MAC and nothing prints at all. I used the respective windows drivers for each printer on the XP Laptop.
I spent two hours with Apple support on the phone and they could not figure out what was going on and suggested that I post my issue to this forum to see if anybody has any ideas.
I also tried to configure the printers using Bonjour (as per Ifelix's documented method) but at some point during the printer setup I get an error message indicating that I do not have "sufficient access" to install the printer driver even though I am logged in as admin on the windows XP computer.
Has abybody experienced similar pain? Is anybody here being able to print to printers connected to a MAC PRO from a Windows XP laptop?
I should also say that my computers are in a network and both are connected to a Linksys Wireless Access point/router.
The Laptop is a wireless laptop and the mac pro is conneced to the linksys router via a regular network cable.
Also, I have no issues printing straight from the mac to both printers.
Would appreciate any suggestions/comments.
Thanks in advance for your time.
regards,
marcelo

What risks does that imply?
Well, it implies that the battery is not user serviceable, which it is not. However, your warranty has already been effectively voided by the spill. So, you don't have that much to lose. As I already said though, there are risks inherent in cleaning any electronic equipment with any sort of liquid. The safer route is definitely to take the machine in for repair, as eww says.
And for the Q-tips, when I opened the machine, it seemed really complicated to unmount or access parts with Q-tips.
Unfortunately, it is complicated. It's not something to undertake unless you are comfortable with it. And it can never be guaranteed that it will actually be clean because there are many spaces that you'll never be able to clean. I should perhaps emphasize that I would only clean the machine myself if there was no chance of being able to pay for repairs. It is sort of a last-ditch option to attempt to avoid the cost of repairs. Nothing is guaranteed though and you may have to pay for repairs anyway.
Wouldn't it be better to just let it bath in the distilled water, wait a few minutes and then let it dry?
Definitely not. If you do that you can forget about the machine ever working again, at all.
do you think there is hope that once cleaned, everything would work again ?
It is doubtful. Like I said, if paying for repairs are not an option, then you should consider at least attempting to clean it. Otherwise, you should have the top case replaced (new keyboard and trackpad).
--Travis

ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs

ODBC connections fails after going from Office 2003 to 2010 on some but not all PCs. Setting up the connection has been a hit and miss. Have tried both x86 and x64. Any ideas? Use ODBC from the control panel and C:\Windows\SysWOW64 same results. Using
SQLexpress 2008r2
Thanks

Hello,
Please consider to configure Windows Firewall or disable it. Not only Windows Firewall but any security software.
https://msdn.microsoft.com/en-us/library/cc646023(v=sql.120).aspx
Windows Firewall is enabled by default.
Make sure you are using SQL Server Native Client to create the ODBC DSN. Not all Windows versions have it, so you may need to download and install it.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

External Hard Drive Fail After Waking from Sleep

Hi,
I've been having this issue for over a year (since upgrading to Lion, and now still persists after upgrading to Mountain Lion), and I haven't been able to find the exact answer I need after searching through the posts here, and on the internet.
I have a 2011 MBP, and after upgrading to Lion last year, I've noticed that my WD external hard drive for the Mac has issues to be recognized after the laptop wakes from sleep. The drive icons are still there on the desktop, and all the files are listed. However, I cannot open any of the files, and Time Machine backup automatically fails.I am able to eject the drives by dragging the icons into the trash can. However, nothing happens if I simply unplug the fire wire 800 cable and re-plug it into the computer after ejecting the drives. I need to reset the external drive by unplugging both the fire wire cable and the power supply, and replug everything.
Aside from being a hampering process after waking from sleep, this is also very stressful on the drive itself, so I would like to fix this. Does anyone know the issue behind this or have a solution? Thanks in advance!

Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

Computer won't CONNECT to c4480 after move from DSL to cable

I have a Photosmart C4480 operating under Windows 7 Home Premium 64bit
It worked fine I could print/scan and read and write to a card
I moved so disconneted it packed it. When I got to the new place set up the computer
hooked up the USB cable and connected it between the printer and the computer.
When I tried to print nothing happened. I Opened Windows Explored and discoverd
that the computer could not see the printer I checked the cable thats Ok tried reinstalling drivers
when it finished it said "connect USB cable" meaning that it could not see the printer.
Other than that there were no error messages
The only thing that changed was at the old location I was using DSL now I am on cable
Do I need a new printer?
This question was solved.
View Solution.

BAC0296, if I understand your issue correctly, you recently moved and now your USB connected printer is no longer recognized by the computer. Is this correct? If so, don't worry about moving from DSL to cable, it shouldn't effect a USB connection.
To start, I would unplug the USB cable from the printer and the computer. Then go to your Devices and Printers folder and delete the copies of the printer there. We're going to start fresh from here.
Once they are all removed, go to your start menu and then to All Programs and find the "HP" folder. In that folder there shold be another folder for your c4480. In that folder there should be an item listed for the printer setup and installation. Go through this process and when you are prompted plug the USB cable into the printer and the comptuer. Finish the installation from here.
Let me know if this helps!

Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
machine 10.6.1. with RDC 2.0.1 (non-working)
9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
Any help would be appreciated

Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

DI Connect to SBO after load from Transaction Notification

Hi all,
I saw few posts on this issue.
I want to connect to SBO after class was loaded by TN.
SBO and DLL hang.
someone solved it using SQLAgent - please explain..?
is there any other solution??

Hi Yaniv,
I also had the same problem. What I did is read a bit about the DI Event Service <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/53cefa6a-0a01-0010-cd8e-e7c189cb6519">SAP Business One DI Event Service</a>
and modified the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/b1dieventservice.zip">Source Code</a>. What it does is use a dll that gets the data from the TN. Then a service creates a thread that communicates with this dll by sockets and gets the data. In this thread you can connect to DI API without problems. This service has .NET Remoting and MSMQ capabilities, that I removed, because I only wanted all to run in the server (and also had problems with MSMQ).
Anyway, the original program is <b>very</b> good, but it needs to have more documentation about MSMQ.
Hope this helps,
Ian

ZCC Login failed after Migration from 11.3.1 FRU1 to 11.3.2

Hey,
System: 6 Primary Server Sless 11 SP3
LDAP: EDIR
Primary: 11.3.2
Sats: 11.3.1 FRU1
After Migration from 11.3.1 FRU1 to 11.3.2
i'll try to login in ZCC
Message ZCC
Error: Login Error: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
See the ZENworks Control Center log file (zcc.log) for the full stack trace.
I tryed with default admin and see that the USERSource is not reachable.
I take a look in the configuration / usersource and there is an Error like: Unable to read contexts. One or more of your connections don't support non-SSL.
ZCC.log sayed
[javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException] [ZENServer]
[DEBUG] [12/30/2014 09:54:02.417] [3547] [ZENServer] [72] [zenworks] [ZCC] [] [Form.java CSRF TOKEN:d1b804076c63e7393af1a72442ced4b5 for the PageId:authoritativeSourceDetails] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.144] [3547] [ZENServer] [85] [zenworks] [ZCC] [] [QuickTask build tasks called in createChildControls, normal flow before ajax] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.348] [3547] [ZENServer] [69] [zenworks] [ZCC] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:179)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. validateCertificateExpiry(LDAPUtil.java:1162)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:774)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:559)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:386)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:359)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:325)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:311)
at com.novell.zenworks.core.web.internal.UserSourceSt atusAJAX.getImageData(UserSourceStatusAJAX.java:77 )
at com.novell.web.ajax.ImageAJAX.service(ImageAJAX.ja va:38)
at com.novell.web.ajax.AJAXDataHandler.service(AJAXDa taHandler.java:40)
at com.novell.web.AjaxServlet.serviceImpl(AjaxServlet .java:100)
at com.novell.web.AjaxServlet.service(AjaxServlet.jav a:74)
at com.novell.zenworks.fw.web.internal.ZENworksAjaxSe rvlet.service(ZENworksAjaxServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:727)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at com.patchlink.sapphire.web.pages.vulnerability.ses sion.HibernateSessionFilter.doFilter(HibernateSess ionFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:241)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:171)
at com.googlecode.psiprobe.Tomcat70AgentValve.invoke( Tomcat70AgentValve.java:39)
at org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:116)
at com.novell.zenworks.tomcat.ZENRequestValve.invoke( ZENRequestValve.java:1346)
at org.apache.catalina.connector.CoyoteAdapter.servic e(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.p rocess(AbstractHttp11Processor.java:1070)
at org.apache.coyote.AbstractProtocol$AbstractConnect ionHandler.process(AbstractProtocol.java:611)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProce ssor.run(JIoEndpoint.java:316)
at java.util.concurrent.ThreadPoolExecutor.runWorker( ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:615)
at org.apache.tomcat.util.threads.TaskThread$Wrapping Runnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:745)
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.Alerts.getSSLException(Alerts.jav a:192)
at sun.security.ssl.SSLSocketImpl.fatal(SSLSocketImpl .java:1884)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:276)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:270)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1439)
at sun.security.ssl.ClientHandshaker.processMessage(C lientHandshaker.java:209)
at sun.security.ssl.Handshaker.processLoop(Handshaker .java:878)
at sun.security.ssl.Handshaker.process_record(Handsha ker.java:814)
at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocke tImpl.java:1016)
at sun.security.ssl.SSLSocketImpl.performInitialHands hake(SSLSocketImpl.java:1312)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1339)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1323)
at com.novell.zenworks.security.certificates.Certific ateUtility.getCertChain(CertificateUtility.java:12 1)
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:175)
... 35 more
Caused by: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.AbstractTrustManagerWrapper.check AlgorithmConstraints(SSLContextImpl.java:946)
at sun.security.ssl.AbstractTrustManagerWrapper.check AdditionalTrust(SSLContextImpl.java:872)
at sun.security.ssl.AbstractTrustManagerWrapper.check ServerTrusted(SSLContextImpl.java:814)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1421)
SR has been created.
Any Tipps /Hints for me ?
Thank You

Originally Posted by robpet
Should have said kind of the same problem...
That was sort of my gut feelings so I checked our certificates beforehand and they are using certs with sha1 fingerprint. But we are not using SSL - our connections are made using port 389. And the communication status is green.
But I cannot add SSL because it complains about "unable to obtain a valid certificate for SSL communication information. Please verify that the adress and port are correct and that the LDAP directory has been configured with a valid certificate.
So I cannot understand why users cannot authenticate with zenagent.
There's a TID about zcc login failures after 11.3 upgrade.
https://www.novell.com/support/kb/doc.php?id=7014716
We ran into the above.

My iMac won't automatically connect to wifi after waking from sleep mode

After dowloading the newest software update and performing a firmware update for my Airport router, my Imac won't connect to Wifi automatically after waking from sleep mode

Please re-download and install the 10.7.3 update. You can locate it at 10.7.3 (Client Combo). Follow the on-screen instructions. Then test it out, if you still have the same problem please restart, when you hear the startup tone hold down the Option Key and then choose the Recovery Partition. Then open Disk Utilities and Repair Disk Permissions 2x. Then exit DU, restart normally and re-test.

HP Media Center PC m1050e - Can't connect to internet after upgrade from XP to Windows 7

My desktop PC with Windows 7 will not connect to the internet after upgrading from XP to Windows 7 Home Premium. This upgrade actually required saving files and a fresh install of Windows 7. When getting Router support help to load a new driver, I keep getting a an error message "Realtek Network Contoller Was Not Found". They say it's an issue that HP will need to help resolve. Can anyone help?
This question was solved.
View Solution.

Thank you very much for your help. I will look into the two options you gave me.

Blurry font after switching from WinXP to Win 7 (Was:Schrift im Dreamweaver CS 3 verschwommen)

<Preran> For the benefit of moderators here, I used Google to translate your content into English:
Good day,
I have problems with blurry font in Dreamweaver CS3 after switching from Windows XP to Windows 7
I have already tried the following:
In "Edit" Preferences "change font size" - unfortunately that does not work. (which had worked fine in the previous changeover to Windows XP)
Then I got in the forum www. office-loesungen.de the tip, sometimes seen on the control panel display, which percentage is set.
When I got the set to the mean value, the writing was not so blurry, but still not really readable.
Experiments with Clear adjust TypeText were not successful.
There is a trick, so the font is larger
If I have to "small" hinders the size that was at 0.75 in the previous pages, it is readable for me, so I could enter the text and read it.
However, the text is then when uploading larger.
What can I do now?
For speedy help I would be grateful
Best regards
Guten Tag,
ich habe Probleme mit verschwommener Schrift im Dreamweaver CS3 nach der Umstellung von Windows XP auf Windows 7.
Ich habe folgendes schon probiert:
Bei „Bearbeiten“ und Voreinstellungen „Schriftgröße ändern“- das funktioniert leider nicht. (das hatte bei der letzten Umstellung auf Windows XP wunderbar geklappt)
Dann bekam ich im Forum www. office-loesungen.de den Tipp, mal über die Systemsteuerung-Anzeige zu sehen, welcher Prozentwert eingestellt ist.
Als ich den auf den mittleren Wert eingestellt habe, war die Schrift schon nicht mehr ganz so verschwommen, aber immer noch nicht richtig lesbar.
Auch Versuche mit Clear Type Text anpassen waren nicht erfolgreich.
Einen Trick gibt es, wodurch die Schrift größer wird
Wenn ich die Größe, die bei den bisherigen Seiten bei 0,75 lag , auf „klein“ verstelle, ist es für mich lesbar, ich könnte den Text so eingeben und auch lesen.
Allerdings wird der Text dann beim Hochladen auch größer.
Was kann ich jetzt tun?
Für baldige Hilfe wäre ich dankbar
Mit freundlichem Gruss
Renate Gundel

I've done this multiple times and it produces essentially the same message, but there is a mention that a restart is pending. This is also strange because this is definitely not the case. First time I used CScleaner it took a while and was obviously busy correcting something. However now when I select clean all, it simply dumps anopther massive log file into AppData and says cleaning completed successfully. Now I just ran it again, so would you like me to post the more recent log file?

Firefox crashes when printing file with Ctrl-P or after print preview

this latest version started crashing when doing e-mail prints. No dump files generated.

Hmm, it started happening again, and this time the suggestions above did not fix the problem. Last time, setting another printer as the default worked.
This time, changing the default printer didn't help. Neither did clicking the "reset Firefox" button.
I also tried shutting down and restarting the Minolta BizHub that I am trying to print to.
I can print fine to another printer.
It worked fine since June 24, my last post.

Svrmgrl connect internal fails after changing oracle os user passwd on 8.06

Hello,
I've this problem.
I've installed oracle rdbms 8.0.6 on HP-UX 10.20.
I've choosen o.s. authentication system with password file.
In the password file I set the password of the os user oracle which owns installation.
In first time svrmgrl connect internal looks good.
But when I've changed oracle os user password, and i retry to do connect internal
I receive the following message:
SVRMGR> connect internal;
Password:
Password:
ORA-01031: insufficient privileges
I've tried to reset the password to the old one, but it's unuseful
Could someone help me?

In the password file I set the password of the os
user oracle which owns installation.The Password for the password file is supposed to be the SYS password and not OS User oracle which owns installation.
I do not think the Oracle OS user password change is the problem. When you alter SYS password using the alter user command, it should change the password file automatically.
Try
SVRMGR> connect sys/sys_password as see whether it works. If it does not, then check other issues.

Setup Airport Extreme for the home wireless - MacBook Air, Pro, and iPad connect just fine. Wireless will not work to Windows 7 and Vista machines - network seen, tries to connect, but fails after entering WPA key.

Can't get Windows Vista or Windows 7 laptops to access internet via Airport Extreme. Works fine with security on MacBook Air, MacBook Pro, and iPad. Brand new Airport, bought today. Windows machines worked fine with existing, relatively modern Cisco home router. The Windows machines see the wireless network, prompt for password, and then cannot connect. Have tried all sorts of things with Windows machines, deleted existing networks, etc. even tried guest login with no security on the Airport - no luck. Windows XP machine directly (wire) connected works fine. Magic Jack works OK. Light is green on the front.

Thank you very much for your help @Sunshyn2005!!!!! I think we're good to go now!

Printing to AEX connected printer fails after printing from WinXP

Similar Messages

Maybe you are looking for