Printing to Canon Printer IR c2880 - Problem

Printer appears to be online and functioning (IP address works fine and html access shows the printer operational)
attempted to connect via printer setup (sees the printer, added the printer using the IPP, selected the Canon driver v4.0 for the printer
looks like I can see all the functionality for the printer, but it never prints.  Just goes into "PAUSE" mode every time.
It's 2013 and I really don't want to delve into the bowels of print driver diagnostics.  What options / solutions can folks offer ?
thanks
SH-Admin

Yep...tried several settings.  I don't see any error messages.  I still get the same response when trying to send to the printer.  All print jobs go into pause mode on the computer.  Never seems to make it into the print queue on the printer.  Worked with dozens of printers in other organizations.  Not seen this one before.
where can I find diagnostics to figure this out (all the config tools from Canon are built for Windows...nc)
thanks
SH-Admin

Similar Messages

  • PDF printer has a problem with Safari in "Reader" mode in Windows7

    As shown in the image above. When I try to use the PDF printer to print out a web page in Safari "Reader" mode, the lines near the bottom of each page get squeezed like this. There is no problem with XPS printer. I guess this problem is because of some incorrect settings in Safari or the PDF printer?
    My system is Windows 7 Pro. I am using Acrobat X Pro. The page I am trying to print is http://en.wikipedia.org/wiki/Electronic_band_structure. This problem only happens when the webpage is adjusted into "Reader" mode in Safari.

    Many thanks for your reply!
    I am sorry, I did not make my question clear. I would like to save some web pages only in "Reader" mode, because in this mode all the advertisements are filtered out and the pages look much nicer than the origional layout.
    I first let Safari to active "Reader" by clicking "Reader" button.
    Then I click "Print" button and select Adobe PDF as the printer.
    The problem is the PDF file has something wrong (shown above), and I would like to know how to avoid this problem.

  • Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

    downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

    Let me give you a slightly different perspective than everyone else here.  You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network.  That's bad.  Very bad, for you, unless you absolutely trust everyone who lives within range of this network.  So stop doing it.
    As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information.  There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot.  Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

  • I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

    I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

    Hello,
    Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
    Regards,
    Nakul

  • When I tried to print I had problems.

    I got a new Macbook pro yesterday.  Brilliant!
    I used Time machine to transfer everything.  I'm getting used to most things but
    when I try to print I had problems.
    I downloaded new driver but still no go.
    Help  please!!!
    Kathy

    If you haven't done so already, try resetting the printing system.
    OS X Mavericks: Reset the printing system  also Yosemite

  • Print Color Management Problem ?

    I have a print color management problem I cannot solve. It reminds me of the print color management problem I had over a year ago when the compatibility conflict between LR and MAC Leopard produced horrible prints. I have Snow Leopard now and been out of the country for some months and yesterday when I tried to make some prints the same problem reemerged. So I downloaded current drivers (and ICCsfor Premium Luster) from Epson and LR 2.6 and spent a good part of the day with Martin Evening's book. I followed (I think) his instructions to make the basic print step by step but the prints still were terrible. My problem is with the color management pop up in the print settings dialog -- it says "color matching" not color management and I cannot check either "no color management " if I want LR to control the process (Kelby)  or check "color sync" if I want my Epson R800 take over. I have no idea where the "color management" pop up went. I'm clueless as usual and probably omitting a step because of frustration or brain numbness. Any help would be appreciated. WJS

    The settings in Lightroom are simple. and contain in the Print Job panel in the Print module. You either select manage in printer (and then select the profile in the printer drivers) or select the profile here and then turn of all colour management in the printer drivers. The second option will usually produce the best results. What you don't want is to have the profile selected in both LR and the printer drivers, so if the driver doesn't have an option to turn of colour management then you may be forced down the first route. However it would be an unusual decision for a printer manufacturer to make drivers that can't turn off colour management, so you may wish to ask how to do it to your printer manufacturer or check the printers handbook.

  • I used to print my photos in my hp psc 2210 printer without any problem. Now it gets stuck towards

    I used to print photos in my HP psc 2210 printer without any problem including the 8X11 enlarged photos, but now it gets caught at the end of the printing resulting in shortened images. Does it have to do with the thickness of the photo paper? It was able to do it before. Are there any adjustments to be made?
    HMC

    Hi,
    It looks like you've tried some of the troubleshooting steps listed in this document, but there are a few more to try first.  Click on the + besides the XP section and follow the steps in order.  See if this helps, if it doesn't I'll look for some more.
    Printer Prints Blank Sheets
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • Photoshop Elements 12 (PL) & Canon EOS 70D RAW problems

    Photoshop Elements 12 (PL) & Canon EOS 70D RAW problems
    Pomoc - uakltualnienia - brak dostępnych uaktualnień
    wersja camera RAW - 8.0.0.137
    not reading raw's from 70D

    so, now after following the linked instructions...
    1. I'v installed  ACR 8.4 and it's opening the RAW files from 70D, but in camera profile I have "matrix"
    in case with 60D RAWs ther was portrait, landscape, etc...
    2. The step wit installing the DNG converter I download the DNG converter 7.4, 8.1, 8.2, 8.3. - the reason is to add in the system camera profile that I want
    every one of them do not install - just nothing happen after doubleclick (!?)
    only one that  install and run it's 7.1 which dont support 70D RAW files....
    it's amazing how to put all this to work propertly
    any ideas?

  • CANON PRO-1 PRINTER PROFILE ACCESS PROBLEM

    I own a Canon pro-1 printer and I am trying to access my third party profiles from within the printer setup/printer profile window, but I am restricted to selecting from only the  Canon's Pro-1 titled profiles for example, Canon pro-1 <FA> 2/3 fine art paper photo rag .  All of my profiles are located in the same location, Windows/system 32/spool/driver/color.  Where do I go to change my printer's settings so that I may access all of my printer icc profiles?  I noticed that the Canon profiles have an .icm format, while my other profiles read .icc. 
    Thank you for your help.
    Mark

    All of your printer profiles must be in the folder that you specified.  I just bought a Pro-1 printer and my printer profiles total seventeen for the Pro-1.  Your Hahnemuhle or other paper mfr profiles must be in this same folder for windows to find them. If you think you are missing some, I would re-install the printer driver, which is where the software loads the icc profiles to begin with.  You have to download other paper mfr profiles from their own sites for the Pro-1 model.
    Debra

  • Printer Canon Pixma MP620, Wifi problem

    I have a new Canon Pixma printer mp620 (USB / LAN / wifi)
    I can not get the printer with the wifi ?
    It works well with USB cable directly on the iMac!
    This printer is used in a wireless network with a Windows XP computer with a wireless modem router USRobotics
    What is wrong with the iMac ?
    Tips: the printer works well in wireless with the PC WinXP
    Canon doesn't propose new driver on www.canon.com !
    Thank you in advance ...

    If you want to connect to the MP620 via wireless, then the instructions are stating that you need to have your wireless access point (the wireless router) ready and you need to know some information about the router, such as its SSID (its name) and any password you will need to connect to it.
    The setup is pretty easy. It's just the manual tries to cover too many options.
    First you must have the printer driver installed and be connected to it via USB. This is so you can communicate with the printer to configure the network (LAN) settings.
    With the printer appearing in the Printer list, you can open the printer queue and select Utility. From the new window, select the Printer shown as a USB device and click the Network tab. This will guide you through connecting it to your wireless network. This is where you need to know your access point information. Once the printer is connected to your wireless network, you will be prompted to turn off the machine and then unplug the USB cable. When you turn the printer back on, you can then add the printer queue again, this time for the network connection. As others have said above, select to Add then select More Printers > Canon IJ Network. The MP620 should appear in the list, which you select and then click Add. Now you are ready to print...
    PaHu

  • Canon MF4450 Printer Double-Sided Problem

    When I use Windows... I can print "double-sided" without any problems..
    Somehow, when I use Mac, the "double-sided" box is in grey color and i cannot chick on it...
    Is there anyway to print double-sided on Mac?
    I am using MacBook Pro 15 inch 2011 and the software of the printer is the latest version!
    HELP me Please

    When your select print, click the button that says "Show Details" in the print window that opens.
    in the dropdown menu that will have appeared in the window, click it and select "Layout". I am pretty sure that is where the two-sided setting is at.
    I am not sure why that two sided button is greyed out. But the place I directed you too will let you select the 2 sided and the other setting associated with it.

  • Canon wireless printer printer off line problem

    I have a Canon 620 printer. It works fine via usb cable, but when I try printing wireless it comes up that the printer is currently off line. I have good wi-fi to the printer and it says the printer is ready. It knows the printer is there so why won't it print? Thanks for any help you can give me.

    I think once you reserve the IP address for your printer, you don't have to set static IP on your printer. But not the other way around. Because if by accident when a post man find two houses with identical address, it'll be tough to deliver the mail.

  • CANON PIXUS MG 7130 PROBLEME WITH THE SCANNER . my iMAC is ok with the printer but can not find the scanner

    help

    iMacs have been in continuous production since 1998 in hundreds of variants. We can't begin to help without knowing what iMac you have and what Mac OS you are running. "iOS" as shown in your profile cannot runon any Mac computer, only Apple's mobile devices.
    Do "About this Mac" from your Apple menu and post what that shows for your OSX version and your processor type. THose are found where I've indicated below with the red arrows:
    This forum is for pre-2006 iMacs but poor labeling on Apple's part causes many to post here by mistake.

  • Print Color Management Problem w. Photoshop Elements and Tiger/Leopard

    Has anyone tried printing with ICC profiles through Photoshop Elements 6 for Mac? Apparently, it does not work on Tiger nor Leopard? My prints look very dark and over-saturated.
    The Datacolor folks, who make the Spyder3 calibrators I'm using, say my prints look like they are being "double color managed," possibly once by PSE and once by the printer driver (even though it's turned off).
    Over at the Adobe Forums some say it's a problem with Leopard. I'm not so sure, because I found that printing color management works fine on a Mac with Photoshop Elements 4.01 and Tiger. Any comments? Thanks.

    Aha! Got it. Adobe has confirmed that the problem is on their end. PSE 6 is double color managing the images. Here's what one user got in reply from Adobe on the subject. There are two separate answers:
    Thank you for contacting Adobe Technical Support.
    After consulting with my colleagues about the issue you raised, I can let you know the following:
    The issue is both on our as well as the driver software side and the workaround we have given is the best available at this time. This issue is affecting all printers, not just Epson or Canon.
    The soft proofing effect that you are seeing in the print preview is indeed an attempt at soft proofing. However since Photoshop Elements managed prints are incorrectly double colour managed it is not as useful as it was initially designed.
    As to the exact details of why this occurred, we have no official information.
    We believe that this will resolve the issues you are experiencing, however, should the reply not help solve the problem, please contact us again, quoting the case number given above, and we will re-open the case.
    Answer # 2
    We have had word back from our engineers regarding your issue.
    The Photoshop Elements team are aware of the problem and are working with Apple and the printer manufacturers to get this to work correctly. In the meantime, the only workaround is to switch off colour management in Photoshop Elements and let the printer handle the colour management.
    Unfortunately we can not make an estimation as to when a fix will be provided. We will close the case for the time being as there really is nothing more we can do about this issue besides offering the suggested workaround. Closing this case does not mean that the research will stop however and the engineers are working on a solution to this.
    As the tech noted, let the printer handle the color instead. Tell PSE not to manage color so it is the step sending the data unaltered. When the print dialogue comes up, under the Color Correction heading, change the pull down menu to "ColorSync". In the menu below that, choose the correct profile for the paper you're using. If the Brightness menu is still active, look for any choice that allows you to turn it off. If none exists, leave it on Normal. If the options below that for Color Balance and Intensity are not grayed out, make sure they are at the center positions (no effect).
    These steps are the same as before, except you're doing them in reverse. Photoshop is doing nothing and the print driver is handling the ColorSync chores rather than the other way around.

  • Final Cut HD-Print to video problem

    Hello brainy people and Help! I am experiencing problems with the Print to Video function. The mac switches the machine on and puts the canon into REC mode, the tape goes round and it records. However on playback there is no image. I have tried tweaking the settings in the dialogue boxes to no avail. I also have another XM2 camera and firewire cable, the results are the same.

    What drives are you using? How's the camera connected? What version of FCE? What version of QuickTime?

Maybe you are looking for