Printing to edge of page
Hello
Can someone tell me how to print to the edge of the page in Illlustrator CS4.
I find that that I cannot print right up to the very edge of the page. I am printing an image onto A4 size inkjet paper. I dont want the image size to increase, just to go right to the edge.
Thanks for any help.
Thanks for that Steve.
You are right, that is exactly what I get - a small part of the edge of the paper that wont print, even whgen I select borderless. I find it amazing that printer companies have not sorted that problem out.
All the best.
Similar Messages
-
I can't print my document from Pages...since the Print Button is lodged behind the Dock...What do I do?
Hi Judith,
Your Print button should be accessible, of course, but sometimes we can do things to confuse the system and we have to take some action to get out of that situation. This case sometimes arises if we change the resolution of our screen display since opening the app, or if we change the position of something that is set to "stay on top" of the display.
If the Dock is the problem right now, you could Hide it or Move it to a different edge of the display, to get it out of the way. Settings are in System Preferences, Personal, Dock. I usually have my Dock set to automatically Hide itself, so it's never in the way.
You could also try Saving, Closing and reopening Pages and see if that resets the location of the Print Dialog. Or, you could just hit Return rather than clicking on the button.
Jerry -
Duplex printing for last 2 pages only
A customer has an invoice report where they want the terms and conditions (which are 2 pages) duplexed while the report itself is not printed that way. Any ideas if this can be done using native SSRS?
SherryI am not sure this will work or not, but you could embed the printer code for duplex printing into your stream.
For HP printers:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-bpl02705-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken#top
Simplex/Duplex operation
NOTE: This is only
applicable to duplex capable printers.
Function
Parameter
Command
Decimal Value
Hexadecimal
Value
Simplex Print
Simplex
Ec&l0S (s)
027 038 108 048 083 (115)
1B 26 6C 30 53 (73)
Duplex Print
Long-Edge Binding
Ec&l1S (s)
027 038 108 049 083 (115)
1B 26 6C 31 53 (73)
Duplex Print
Short-Edge Binding
Ec&l2S (s)
027 038 108 050 083 (115)
1B 26 6C 32 53 (73)
Long-Edge (left) Offset Registration
# of Decipoints (1/720")
Ec&l#U (u)
027 038 108 #...# 085 (117)
1B 26 6C #...# 55 (75)
Short-Edge (Top) Offset Registration
# of Decipoints (1/720")
Ec&l#Z (z)
027 038 108 #...# 090 (122)
1B 26 6C #...# 5A (7A)
Page Side Selection
Next Side
Ec&a0G (g)
027 038 097 048 071 (103)
1B 26 61 30 47 (67)
Page Side Selection
Front Side
Ec&a1G (g)
027 038 097 049 071 (103)
1B 26 61 31 47 (67)
Page Side Selection
Back Side
Ec&a2G (g)
027 038 097 050 071 (103)
1B 26 61 32 47 (67) -
Printing for small organiser pages
Hi
I can't print my calendar on to my diary/organiser pages (Filofax) because at 9.5 x 17cm , the pages are too small.
Underneath the preview window on the print page I get a message saying: "The paper size is too small select a different paper size"
Is there a work-around for this? BTW no prizes for anyone who says "Buy an iPhone" !!
Marcus
Message was edited by: Marcus_HI am not sure this will work or not, but you could embed the printer code for duplex printing into your stream.
For HP printers:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-bpl02705-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken#top
Simplex/Duplex operation
NOTE: This is only
applicable to duplex capable printers.
Function
Parameter
Command
Decimal Value
Hexadecimal
Value
Simplex Print
Simplex
Ec&l0S (s)
027 038 108 048 083 (115)
1B 26 6C 30 53 (73)
Duplex Print
Long-Edge Binding
Ec&l1S (s)
027 038 108 049 083 (115)
1B 26 6C 31 53 (73)
Duplex Print
Short-Edge Binding
Ec&l2S (s)
027 038 108 050 083 (115)
1B 26 6C 32 53 (73)
Long-Edge (left) Offset Registration
# of Decipoints (1/720")
Ec&l#U (u)
027 038 108 #...# 085 (117)
1B 26 6C #...# 55 (75)
Short-Edge (Top) Offset Registration
# of Decipoints (1/720")
Ec&l#Z (z)
027 038 108 #...# 090 (122)
1B 26 6C #...# 5A (7A)
Page Side Selection
Next Side
Ec&a0G (g)
027 038 097 048 071 (103)
1B 26 61 30 47 (67)
Page Side Selection
Front Side
Ec&a1G (g)
027 038 097 049 071 (103)
1B 26 61 31 47 (67)
Page Side Selection
Back Side
Ec&a2G (g)
027 038 097 050 071 (103)
1B 26 61 32 47 (67) -
Print the report on page has width larger than height and not landscape mode
Hi,
I'm trying to print report on page (Width: 18cm, Height: 13cm) which the width larger than the height.
The problem is windows keeps changing the page oreintation to landscape and when I change it back to portrait its changing the width to 13cm and height to 18cm.
I'm using dot matrix printer to print the report, if i put Landscape , printer is printing the text in horizontal.
Already i have tried to setup the custom for on printer, and used custom page size but it is changing to landscape.
I need to print the report with out preview, direct print top printer, NO PDF....
Thank you .....Hi Anil,
After testing the issue in my environment, I can reproduce it. When I set (Width: 18cm, Height: 13cm) as the Report Page size, it would automatically convert Orientation from Portrait to Landscape. Because the Orientation displayed is dependent on the page
width and page height of the report.
But in my scenario, the Orientation option just change the Width and Height sizes, it couldn’t affect the text rotation. I guess this issue can be caused by the printer and printer driver, please try to update them. Reference:
http://stackoverflow.com/questions/15244336/printing-in-landscape-or-portrait-automatically-rotates-text-ssrs?lq=1
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I switched form IE to FF. In IE, I could select text (or photos) and print just the portion of web pages and emails that I wanted, thus saving paper and ink. I have not been able to do that with FF. I have to print all of each page, so text, ads, and whatever other extraneous material prints. What a waste! Is there any way to select and print just what I need using FireFox? Currently I have to run both IE and FF to handle my printing and documentation needs. Thank you!
Still happens with Firefox 12. I wish they'd just fix it, the way it used to be in Firefox 10, without the complicated workaround suggested above.
-
How can i print all the tab pages not just the first page (tab)
how can i print all the tab pages not just the first page (tab)
You would need to do this programmatically. Here's one way:
Attachments:
Example_VI_BD6.png 3 KB -
How to print an envelope in pages 5.0
How to print an envelope in pages 5.0
I'm away from my computer right now but I believe there is a template for that.
Click New, select new from template, it should be there...
Alexis -
Print total in last page,
Hello Everyone
In PLD i have a requirement whereby if the layout goes into more than a page says 2 pages,then the total should display "Continued in next page" in the 1st page and in the last page(in our case 2nd page) total should print the document total in the same area. How can this be done? How to achieve this if...then...else statement in PLD
if CurrentPage()!=TotalPages()
then "Continued in Next page"
else Doctotal
Thanks and Regards
Raghu
Edited by: Raghu Ram on Apr 7, 2009 12:38 PMDear Raghu,
If you would like to print certain fields on the last page only,
'TotalPages()' cannot be used in formula, therefore, please follow the
Workaround below.
As a Workaround create the following field:
Field_Formula
General Tab
Untick visible
Left = 0 / Width = 0 / Top = 0 / Height = 0
Content Tab
Source Type: Formula
SystemString(ContinueNextPageNotice) ==''
And enter the ID of this field as the "Link to" for the Fields you
like to print on the last page only.
For more information please refer to the NOTE 1058584.
Hope this helps.
Regards,
Gagan Thareja
SAP Business One Forums Team -
Text overflown is not getting printed in the next page in ADOBE
Hi Experts,
I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
Please help me regarding this.
Thanks & Regards,
Karthik MDHi Lohitha,
Even "Expand to fit" is been enabled.
Thanks & Regards,
Karthik MD -
Text overflown in the first page is not getting printed in the next page
Hi Experts,
I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
Please help me regarding this.
Thanks & Regards,
Karthik MDHi,
This issue is in ADOBE, I think there is no concept of Window in ADOBE,
The text box is placed inside a Subform. -
Firefox 3.6.8, Windows XP Pro
Frequently when I try to do a print of a web page, I end up printing only whatever fits on the first printed page. Instead of continuing to later pages as needed, the rest of the displayed web page is simply ignored.See Tools > Options > General > Startup: "When Firefox Starts": "Show my home page"
-
I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?
You can use printPages(1, 5), however I need to know how you print current page.
-
New owner here. I see that in printing I can select one page and print same. How do I select numerous pages from a document and print only those selected pages? I would not think that I can only select one page at a time. Thanks much
Just change the range as illustrated below. If you don't see that, click the Show Details button.
-
How can I print out a few pages of a kindle ebook (music) from my iPad.
How can I download this book to my iMac from the iPad. It is NOT in my e books library, but I can only access it from my kindle app.
Thanks for any help you can give me.One work around is, if the Kindle app allows, make a screen cap of the page and print that.
Hold down the sleep and home keys and relase them together....kinda like you'd press the shutter of a camera, a joint quick down and up
You'll see a white flash and hear a shutter sound. Then look in your photos app and you'll see the images. You can print them just like you'd print a photo.
Maybe you are looking for
-
Disk Utility won't create Disc Image from DVD
I'm trying to copy a DVD that I made in iMovie and iDVD. The DVD plays fine, using DVD Player. I open Disc Utility, select the DVD, click "New Image," and save to a directory. The hard drive has plenty of room. Disk Utility then shows a stop sign and
-
Is there a way to raise/lower all audio at once?
I have recorded audio to different objects throughout my 400+slide project. Is there a way to adust the audio all at once to save me a massive amount of time? I'm using Captivate 6. Thanks!
-
FAGLF101 - SORTING/RECLASSIFICATION (NEW)
Hi I have done the configuration of Parallel Ledger and Configured the Sort method, Valuation area, assigning GL accounts for the Sort method and Assignment of Valuation area to Accounting Principle. Then when I am running the FAGLF101 transaction fo
-
How to use Wiki and Blog in Spaces
Hi, How do I use wiki and blog inside the Webcenter Spaces. I don't see wiki and blogs. Have configured discussions but trying to find out how to configure wiki and blogs. I don't have any custom application just using Spaces. Thanks
-
5D Mark III : what RAW retains from ALO, LENR, NR, etc. ?
Hello, I could not find this in the manual and would appreciate your help to clarify these points. 1) Could you tell me among these which are applied to the RAW captured data or just present as metadata (like WB setting for instance) ? - Auto Lightin