Printing to network HP PSC 1210 All-in-one

Hello. I would greatly appreciate any help I could get with my dilemma.
I'm trying to print from my macbook to a network PC. I've set up the printer on my MacBook successfully and configured the printer on the PC so that it will allow sharing for the printer. When I print a document from my macbook, it is sent to the PC, but gets stopped there.
A box on the PC "Printers Folder" reports an error. It says "There was an error found when printing the document "Remote Downlevel Document" to USB001. Do you want to retry or cancel the job?
When I click "Retry" it just flashes the same box again. When I click "Cancel", the print job is removed from the PC's print job queue.
Does anyone have any ideas how to fix this? Thanks in advance.
-Kevin

HP's printer drivers for non-postscript printers are written to use USB only - you'll need to use a third-party driver like Gimp-Print - now called Gutenprint. Get the latest Gutenprint version here:
http://www.linux-foundation.org/en/OpenPrinting/macosx
In addition to Henry's method, you can try this guide:
http://www.ifelix.co.uk/tech/3015.html

Similar Messages

HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

Hello ,
I have HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
'HP Officejet and PSC Full Feature Software'
compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

Hi,
There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
I work for HP.

How can I fix a check paper error on the HP psc 1210 all in one printer?

Product name/number: HP PSC 1210 all-in-one
OS: Windows 7
Error Msg: Check Paper light flashes
I have verified there are no paper jams, paper is loaded, print cartridges move freely and rollers are clean. Is there a a paper out switch that can fail?

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP psc 1210 all-in-one printer and Mac OS 10.9 (Mavericks)

I just installed the new OS X (Mavericks) on my mac yesterday, and now my printer, an old but reliable HP psc 1210 all-in-one, will not install. I was previously running OS 10.6 (Snow Leopord) and had no problems with the printer. Is there anything I can do to install my printer on the new OS? My computer doesn't even recognize that there is a printer connected via USB when I try to install it... is there anything I can do?

Hello,
Here is a link to a support document on hp.com on how to install on OS X Mavericks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
Let me know if this was usefull by clicking on the Kudos button.
I work for HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

hi,
I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7. i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

HP PSC 1210 all-in-one pen failure issue

I have an hp psc 1210 all-in-one printer and recently replaced both print cartridges. Then, when I went to print it said that i had a pen failure. I then discovered online that this could be because of dirty cartridge contacts, so I cleaned them as instructed. After allowing them time to dry, I returned them to the printer and plugged it back in. However, now the printer will not turn on at all. What is wrong with my printer?

Hi,
What application you are scanning from? is it Paint or Windows fax and scan?
Can you see the same behavior while using any of those options?
You may find the exact steps to scan on Windows 7 with the PSC 1210 within the FAQs section below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp psc 1210 all in one printer feeding error

I have a model 1210 all in one printer and it will not feed paper. it sounds like something its working, but not gripping the paper. PLEASE ADVISE

Hello @anne0701 , and welcome to the HP Forums!
I can see you're experiencing paper feed issues. I would like to help!
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest following the steps in this video on PSC feed issues:
Fixing Paper Pick-Up Issues - HP PSC 1200 All-in-One Printer
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Installing software for my HP psc 1210 all-in-one printer on to my Mac?

I have downloaded new software and drivers for my all-in-one printer. I am running OS X 10.5.2 on a 20" 2.16 GHz Intel Core 2 Duo. The computer recognises that a printer is present and I can print with no problems. The problem that I'm having is with the scanner function. I don't think that the HP software is registering that there is a printer present. When I go into the HP setup assistant no printer comes up in the selection window. When I go into Printer & Fax via system preferences the HP psc 1210 series comes up as the default printer. I've had this problems before but cannot remember how I rectified it. I'm sure it got something to do with erasing the driver's off the computer and starting over again. Can anyone please help me or point me in the right direction. Thanks

Hello,
Here is a link to a support document on hp.com on how to install on OS X Mavericks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
Let me know if this was usefull by clicking on the Kudos button.
I work for HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

HP psc 1210 all in one printer - Printing photos with Green Hue

Hey folks,
it used to work fine, now for no apparent reason, it is printing out photos with a strong green hue. They all come out looking very green and yellow.
I have done several things - i have downloaded and updated all printer software and drivers, i have ran all printer calibrations and cleaning programs, i have accessed Macbook utilities folder and ran all colorsync utility's such as repair and adjust hue. What is going on here? I am completely stumped with this one.
Thanks,
Steve.

Hi,
What application you are scanning from? is it Paint or Windows fax and scan?
Can you see the same behavior while using any of those options?
You may find the exact steps to scan on Windows 7 with the PSC 1210 within the FAQs section below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My HP psc 1210 all-in-one, suddenly stopped printing any text. it will print the graphics.

I believe I have tried everything. The HP psc 1210 series all-in-one refusses to print text. nor will it scan or copy. I have done all the troubeshooting that I can find. Still will not print from PC or copy. I think it will scan to the computer. Icon with gray circle around it, states it is offline, yet from the control panel, printer and faxes, shows it as being online and ready. What else can I do to remedy this problem? Thank you in advance.

There may be 2 separate issues here.
-For the offline portion, check this document out:
Printer is offline
-For just printing graphics, this would make me think that the Black cartridge is empty/low on ink/malfunctioning. Try printing a black and white picture. That would let you know if it is the cartridge or not.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Using HP psc 1210 All-in-One to print from Wordperfect 11

I just purchased a new HP 64-Bit computer and a new copy of Wordperfect 11. I hooked everything up and installed the new program, but I can't get my printer to print correctly. I tried installing all the newest updates and any service packs offered for Wordperfect but it still won't work. It will print, but the image is distorted and it only does it with the Wordperfect program. Please help since I use the program for my small business.

No one can help me!?

Problem printing thru network with new 8500A all-in-one

I installed a new Officejet pro 8500a plus on my network. I have 3 computers on the network set up this way: DSL modum connected to Linksys router, all 3 computers connected to the router, PRINTER is connected to main COMPUTER and other 2 computers print through the main computer.
I installed the printer sucessfully and ran the HP network wizard following the dialogs for connecting through another computer. I can print, and fax fine from the main computer but not from the other computers. I configured the printer as "shared" on the main computer and the other computers recognize the printer and set it as the default printer. But when I try to print form the other computers nothing happens. When I go into control panel - printers - properties - ports on the main computer, the printer is listed as USB002 but when I click on "configure" I get "An error occured during port configuration. This opperation is not supported".
Main computer is running Windows Vista with current updates
Other computers are running Windows XP SP2 with current updates.
Any ideas?
Thanks, Jim
This question was solved.
View Solution.

Why are you using Windows print sharing with your nice network printer? This mode only supports printing, not scannning or faxing. The better way to do this is to attach the printer to your router with Ethernet or wirelessly so that all PCs (regardless of how they connect) can use all of it's features. Disconnect the USB cable and run the Wireless Setup Wizard (if you want to connect it wirelessly, otherwise, plug the Ethernet cable in to the printer and router) from the front of the printer (Setup >Network menu), then run the HP software to "Add a Device" on each PC.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

PSC 1210 All in One and Windows 7 64 bit

Will Vista 64 drivers work for PSC 1210 on WIndows 7 64 bit?

Avin wrote:
Will Vista 64 drivers work for PSC 1210 on WIndows 7 64 bit?
The PSC 1210 drivers are available from Windows Update, see here. You can go to the Printers folder, Add Printer, Local Printer, LPT1:, Windows Update. It will take a few minutes to load the updated set of drivers. When the updated list appears cancel the installation, then connect the USB for the PSC 1210 and it should automatically install.
If you do not have a high speed internet connection the Windows Update process may be prohibitively slow. In this case you can use the Microsoft Catalog Site to select just the drivers you need. Unfortunately it can be difficult to find the specific drivers as there is no apparent way to search for the x64 drivers automatically, you will need to click on the titles and read the description to see what architecture the particular driver supports. The Microsoft Catalog site requires IE, it does not work with other browsers.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP psc 1210 all in one - software update help

Hello
I bought a new Dell laptop . Windows 8.1, 64 bit. The software with my 10 year old all in one is not compatible. I do not understand drivers and software needs. Do I need both updated? How do I proceed? Thank you, Tom

Hello,
All you have to do is to connec the printer to the Windows 8.1 PC and the in-OS driver will be installed.
There is no fullfeature driver software available for Win 8.1 PC.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP TouchSmart 600 and HP psc 2210 all-in-one printer

Hi SiobhanF,
I just registered and this is my first post.
I recently bought a new PC...an HP TouchSmart 600. My printer is a HP psc 2210 all-in-one. I need advice on whether the two are compatible and if so how to get them working together.
Thank you,
waj

This is likely caused by the failure of one of your cartridges. Remove the black cartridge and print a test page. Does the printer print at normal speed? Is so the black cartridge was the issue and should be replaced. If not then put the black cartridge back in and remove the color cartridge and print test page. If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printing to network HP PSC 1210 All-in-one

Similar Messages

Maybe you are looking for