Printing to OfficeJet 6500a

Hello all,
I have been doing alot of reading on printing issues and have not really seen a solution to what is occurring for me.
I have a laptop that is runing Windows 7 x64. This laptop is connected via a wired connection. I am trying to print to an OfficeJet 6500a printer that is connected via a wireless connection. Each time I try this the dialog comes back saying it cannot contact the printer.
From my laptop I can ping the printer's IP address, which is statically set to 192.168.1.3. If I try to hit the printer via a web page I cannot. I am running Microsoft Security Essentials as my firewall/AV and even if I disable the firewall I still cannot print successfully. I have rebooted my router several times to no avail either.
I have run and Scan and Print diagnostic tool, and it cannot see the printer. I am running the latest version of the drivers. Any help would be appreciated, as I am ready to pull my hair out.
Thanks,
Steve

Download and run this: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03286146&cc=us&dlc=en&lc=en
What does it say?
What router are you using?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Invalid Printer Code - OfficeJet 6500A

Every time I try to register by printer code in ePrintCenter I receive the message "Invalid Code". I've reset my printer back to the factory settings twice to get a new printer code and each time I receive the same error.

Hello John!
How did you reset the printer? Have you gone under Web Services setup to do Restore Factory settings? Is the code coming out differently when you print?
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Unable to connect printer to my network with Officejet 6500A E170a-f

Hi everyone,need help from you techy guys,I NO THAT THIS SEEMS AN OLD STORY BUT YOU GUYS ARE MY BEST BET.(Before I RETURN the printer).I recently purchased the HP Officejet 6500A Model No;E170a-f .The printer was purchased from a company who deal in ex-demo/customer returns,the printer is practically new as its only printed 400 pages and scanned 41 pages and its still got the original ink cartridges.The problem I am having is getting it to connect to the network so as to be able to use eprint options.I have tried almost all the HP diagnostic software that HP Support have on site.I have downloaded the latest software for this printer,also downloaded latest updates including HP print and scan Doctor,Troubleshooting HP Installation failure-Network,been on HP site and HP Support Forum for 3 days scratching my head trying to solve the problem,even bought new ethernet cable but nothing,works fine when connected via USB Cable,the printing and scanning.
I`ll give you some technical points about the system.
PC Running Vista 32 bit
plenty of hard disk space.
The Printer Spec:
Officejet 6500A
Model No: E170a-f
Serial No:{Removed for privacy}
Product No: CN555A
CONNECTIVITY SETTINGS
Network Statusffline
Active Connction Type:None
URL:Http://0.0.0.0
Host Name:HP868067
When the Ethernet Cable is connected at the rear of the printer there are no lights flashing(yellow and green) and the Indicator lamp on the control panel does not seem to work also.
ANY HELP WILL BE MOST WELL COME I SHALL THANKYOU IN ADVANCE.

Hi,
Welcome to the forum. My suggestion: return it and get your money back or swap for a working printer.
Regards.
jam2411 wrote:When the Ethernet Cable is connected at the rear of the printer there are no lights flashing(yellow and green) and the Indicator lamp on the control panel does not seem to work also.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Officejet 6500A Plus fax report

How do I stop my HP Officejet 6500A Plus from printing the fax report? I can't seem to find this setting anywhere and I'm tired of wasting ink & paper.
Printer: HP Officejet 6500A Plus
Operating System: Windows 7 Home Premium with Service Pack 1

HI,
Press setup and find the fax setup menu. In there there should be an option Fax Report. In there you are able to tell the report when or when not to print.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

My HP OfficeJet 6500A Plus printer/scanner/fax/copier won't connect to my wireless network

I tried going through the Wireless Network setup on my HP OfficeJet 6500A Plus machine. The printer recognizes the network and I then type in my network's password but it won't connect to the network. What can I do? I would like to be able to print and scan wirelessly. Help please!

Hello erking,
Sorry to hear that you are having an issue with connecting the printer to your Mac over a wireless connection.
I have done some research and I have found a great document that deals with The Printer Is Not Found During a Wireless Network Installation.
Please feel free to write me back and I will be happy to assist you further with any questions or concerns you may have.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How can i make my officejet 6500a print in black and white only?

I just bought an officejet 6500a and I can't figure out how to make it print in black in white only. I print a lot of stuff that doesn't need color and want to save my ink. On some prints it gives me that option when I print. but for the most part it doesn't allow me to change to black and white on things i am printing off the web

Pages 30-34 of the user manual for the Officejet 6500A covers how to change print preferences for the printer with both Mac and Windows. It covers documents, brochures and photos and covers finding the gray scale option. Here is a link to that manual http://goo.gl/6J61R .
I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

How do I use the double sided printing with my HP Officejet 6500A plus

I need help with learning to use the double sided printing with my HP Officejet 6500A Plus

Click on the Show Details button just above:
You can configure various options from the dropdown menu just below Orientation.
Printing two-sided requires a two-sided adaptor for the printer. Otherwise, you have to print out odd numbered pages first, turn them over and reinsert into the paper feeder, then print even numbered pages. If you do it right you get a nice two-sided document. If you do it wrong all the even numbered pages will be upside down.

HP OfficeJet 6500A all in one Printer . No European size envelopes apart from C6 on the printer.

We have the OfficeJet 6500A All In One Printer. It is on a network to two computers one using Windows Vista and the other Windows7.
It seems strange that the only size of envelope for the European Market is a C6. There is no facility for customising a DL or C5 which are the other two popular sizes of envelopes. We cannot customize from either computer. We have tried altering the specifications of other envelopes listed for the printer but to no avail. Has anyone got a solution to this problem or are we going to have to wait for HP to upgrade the printer programme. Word Perfect Office X4 is the word procesing programme in use plus a basic Microsft Word that is OEM.

Hi jspin3,
I'd like to help. For now, I would hold off on the uninstall and reinstall. Can you answer some questions?
Is the printer connected by USB, Ethernet or wireless?
Do you get any error messages?
Does a blank page come out or do no pages come out when you try to print from the computer?
If you put a document face down on the scanner glass, are you able to make a photocopy?
Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here
If you print a Self Test Report, do all of the colors print?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Wireless configuration for HP OfficeJet 6500A plus All-In-One printer on Ubuntu 10.04

I have bought a HP OfficeJet 6500A plus All-In-One printer CN557A, which I want to use with ubuntu 10.04 64-bit as a wireless network printer.
Before i bought i checked compatibility on www.hplipopensource.org and www.openprinting.org, and all was in order.
The machine is autodetected and fully functional when connected with a usb cable, but i have not managed to get it to work as a wireless printer.
This is what I did:
I configured the printer on the wireless network (through the printer interface), and it connects. It prints out a "Wireless Network Test Report", and everything works. I can ping to its local ip adress, and access it through the browser. HP eprint also works.
I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognise the device.
I ran 'hp-check', which gave no errors or warnings:
tjoff@mek-403-jakbo-01:~$ hp-check
HP Linux Imaging and Printing System (ver. 3.11.10)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux mek-403-jakbo-01 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 16:11:24 UTC 2011 x86_64 GNU/Linux
Distribution:
ubuntu 10.04
Checking Python version...
OK, version 2.6.5 installed
Checking PyQt 4.x version...
OK, version 4.7.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.11.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW"
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.11.10
date_time = 2011-11-16 14:30:35
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
device_list =
interval = 5
| DISCOVERED USB DEVICES |
Device URI Model
hp:/usb/Officejet_6500_E710n-z?s HP Officejet 6500 E710n-z
erial=CN16F2402Q05JW
| INSTALLED CUPS PRINTER QUEUES |
B-403-271-A4-COLOR2
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color
B403-271-A4-BW
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW
HP-Officejet-6500-E710n-z-FAX
Type: Printer
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
PPD Description: HP Officejet 6500 e710n-z, hpcups 3.11.10
Printer status: printer HP-Officejet-6500-E710n-z-FAX is idle. enabled since 2011-11-16T01:00:45 CET
Communication status: Good
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0x5412 at 002:005:
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
Device node: /dev/bus/usb/002/005
Mode: 0664
| USER GROUPS |
lp adm dialout cdrom plugdev lpadmin admin sambashare vboxusers
| SUMMARY |
No errors or warnings.
Done.
I then ran 'sudo hp-setup', chose the device (which was detected), chose my wireless network, entered the wireless security key. On the configuration results dialog I get two messages:
"Your printer has been succesfully configured on the wireless network. You may now unplug the USB cable"
and
"The Ethernet cable is plugged in which will prevent you from connecting to a wireless network. To connect wirelessly, remove the cable and try again. (VSA000)"
There is no ethernet cable plugged in, so i can't remove it. I unplug the USB cable and click 'finish'. This makes the 'hp-setup'-dialog start over again, and the printer has not been installed.
In the terminal i have the following:
tjoff@mek-403-jakbo-01:~$ sudo hp-setup
[sudo] password for tjoff:
HP Linux Imaging and Printing System (ver. 3.11.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching on USB bus...
GET /IoMgmt/Adapters HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
error: Missing response key: 'iorotocols-iorotocol-dd:dnsserveripaddress-0'
GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks/SSID=mVnmXfsu HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
I then tried to reconnect the printer usb cable and run 'hp-toolbox' and click "Wireless/wifi setup using USB". Now i get the error:
tjoff@mek-403-jakbo-01:~$ hp-toolbox
HP Linux Imaging and Printing System (ver. 3.11.10)
HP Device Manager ver. 15.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.11.10)
Wifi Configuration Utility ver. 1.1
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Channel write error
error: An I/O error occurred. Please check the USB connection to your printer and try again. (Device I/O error)
Done.
I do not how get past this stage, and any help is welcome.
This question was solved.
View Solution.

A friendly soul on ubuntuforums pointed out to me, that the wireless configuration is only necessary when the printer is NOT connected to a (W)LAN. So all I really had to do was to configure the printer in the CUPS administation page, and it worked. Problem solved. Silly me.

My HP Officejet 6500A WIll not print in Color

Hi, I have a HP Officejet 6500A wireless printer. I changed all of the color cartridges, and now cannot get it to pront any colors at all. ANy feedback will be appreciated.

Hello @sujharris ,
Welcome to the HP forums.
I understand that you are having a print quality problem.
I would like to help.
It could be the printhead.
Try going through the following document.
Fixing Print Quality Problems for the HP Officejet 6500A e-All-in-One Printer Series
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Problems printing to HP officejet 6500A plus e-All-in-one printer e710n

Hi,
I am struggling to print to my " HP officejet 6500A plus e-All-in-one printer e710n". According to the setup network test (Wireless network test report), everything is successful (status "PASS" for all fields). I also checked that the IP configured is the same as the IP displayed on the printer when i push the wireless button (updated via "Update IP address").
I have a laptops as well as netbooks connected to the wireless network. All these devices could previously print, however now none of them can. When i run the diagnostics (both the standard trouble shooter, as well as the one from microsoft when clicking on the fixit option), no problems are detected. When checking the device manager, i can see no conflicts.
When i open the printer control panel and click on "Customize your printer" and then go to "Ports" and click on the "configure port" option, i get an error "An error occurred during port configuration. Operation could not be completed (error 0x0000007b).".
Please assist with any suggestions.

I was able to resolve the problem.
I reinstalled the printer on one of my other laptops (this might have cleared up an error on the printer). I think the true problem is related to the fact that we left the printer on, we've started switching it off when not in use. Even though it goes into sleep mode, it seems to cause problems over time if not switched off on the printer itself.
The basics i did was check the network connection, printed a status of the network connectivity (you can do that from your control panel on the printer). If the network looks good, then try leaving your printer off for an hour or so, if that doesn't work, try reinstalling the printer on your device and start switching it off after use. I know it sounds crazy, but that's what i've been doing and haven't had a problem since.
It was a strange problem, in some cases i wasn't able to see the printer from devices that previously could, when the devices that could see the printer tried to print, it would print okay for a few pages and then start printing garbage, followed by failing completely and cancelling the print. When this happened there would be an error on the device saying it cannot connect to the printer, even though it could at the start of print.

HP update HP Officejet 6500A Plus e-All-in-One Printer-E710n multi fails @ 96%Z

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows Vista
HP is trying to update my HP Officejet 6500A Plus e-All-in-One Printer - E710n w/ "HPZSetup.exe & multi fails @ 96%
Errors:
HP-PhotoSmart All-In-One Series "Error" "wStub" "2229580"
Same message appeared multiple times with new numbers: 459624; 525134; 328216
I am on WIFI but system always shows me on USB. I thought maybe that was the problem so I connected by USB. No Help.
I assume this is an update?? HP is insistant and keeps sending me this update which alwaysends in FATAL ERROR at 96%
Next steps?? Thanks JLM_JR
This question was solved.
View Solution.

No Problem. Is everything working now or this tool only removed the HP software? If so, then try downloading the full feature software to see if this fails or not here. Please choose your correct operating system; Either 32 bit or 64 bit. I will be looking forward to hearing from you.
I worked on behalf of HP.

HP OfficeJet 6500A Plus e All in One Printer E710n-z

I have the HP OfficeJet 6500A Plus E710n-z series for All-In-One Printer. I lost my driver software disk together with the PC computer that had the software driver installed in it.
I now have the Printer and my current PC ( which is using Wins 7 Home Premium 64-bit Operating System).
I have found the download link for the driver software from HP website and from the internet.Each time I download the driver software, there was a "cancel" or "unable to proceed" message at the almost end of the download process. I was told to "retry".
My humble request is to have the driver software files so that I can install the driver and operate the printer. My PC is functioning as it can detect correctly the Printer with its correct name and model.
I donot know the problems. Is it a virus?
Alternatively, I greatly appreciate if you could email to me the driver software files.( Please use Google Cloud if the files are too big).
Thank you for helping me.
Best regards.
Paulgo

Since you have 10.10, you will first need to install this: HP Printer Drivers v3.0 for OS X. With that installed, follow the steps to add a printer here: Installing Your HP Printer Driver and Software for Mac OS X.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Officejet 6500A Plus e-All-in-One Printer - E710n wireless print and web app problem

We have an HP Officejet 6500A Plus e-all-in-one Printer - E710n and run Windows 7 on our laptop.
I have run the wirelss setup wizard and have successfully connected the printer to the router, and both the laptop and printer are on the same network and have identical SSID.
However, we can not send any prints the printer wirelessly. We have to hook it up to the USB to do so. We are also unable to access our web apps; pressing the app button on the printer control panel brings up the following:
"Connection error. The printer was unable to connect to the server. Check your internet connection and try again."
I have run through the suggested solutions under "A Network Connected Printer Cannot Access Print Apps, Web Services, or ePrint" in the customer care help centre which didn't work, although when I tried to enter the IP address under IPv4 into the browser address bar it timed out. I tried the HP Print and Scan Doctor, but it returns a result that suggests everything is fine.
I turned off the firewall and tried again with no luck.
I really am at a loss now. Diagnostics say it should work, but it doesn't. Help!

Disable Bitdefender altogeher and try again.
Also, see this: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02251103
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet 6500A won't print

My officejet 6500A plus won't print often. It says it can't communicate with my Asus pc. I unplug it for a day or two and it starts printing! Just turning it off doesn't help. I need to unplug it. Meanwhile I can't print for days! Any suggestions?

Hey @collage,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the communication issues you're receiving on your Windows 8.1 computer when trying to print to your HP Officejet 6500A Plus e-All-in-One Printer. Can I please have you run through the steps below.
Step 1: Run Microsoft Hotfix:
Microsoft recently released a Hotfix to resolve printing issues on the Windows 8.1 Operating System. I'm going to have you start by running the Microsoft Fix to see if this quickly resolves your intermittent print issues.
Microsoft Support: Hotfix
Once the website opens, select the Hotfix Download Available box. Run through the onscreen instructions to complete the Hotfix update.
Once the Hotfix is complete, please test printing again. Should the issue persist, please proceed to the next step.
Step 2: Add Alternate Driver:
Even though there is a Full Feature Software and Driver download available for your printer on Windows 8.1, there is a chance that your Windows 8.1 Operating System is not agreeing with the driver for your printer. To confirm if this is the case please follow the steps below.
Open your Start screen (either by selecting the windows start button in the bottom left hand corner or by selecting the 'Windows' button on the bottom left of your keyboard to the left of 'Ctrl'
In the Start Screen type 'Devices and Printers'
If the Devices and Printers option doesn't automatically populate, than click on Settings on the top right and then click on Devices and Printers.
In the Devices and Printers folder right click on your HP Officejet 6500A Plus and left click on Printer Properties
Left click on the Advanced tab
Left click on New Driver
When the New Driver window opens just hit 'next' until you see a list of Manufacturers on the left and a list of Printers on the right.
Select HP as the Manufacturer on the left
Select Deskjet 9800 as the printer on the right. If Deskjet 9800 doesn't appear than select 'Windows Update' on the bottom left and once the update completes you will be able to select Deskjet 9800.
After selecting Deskjet 9800 hit next to complete the New Driver Wizard
Under the Printer Properties window select 'Apply' but don't hit OK
Select the General tab
Rename your printer back to HP Officejet 6500A Plus
Hit OK
Lastly, right click on your HP Officejet 6500A Plus one more time and left click on Printing Preferences
Left click on the Paper/Quality tab
Left click on the 'Normal' dropdown for Print Quality on the bottom right and change this to Fast Normal
Hit Apply and OK
Try to print!
Please let me know if either the Hotfix from Microsoft of the alternate print driver resolves your printing issues. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Printing to OfficeJet 6500a

Similar Messages

Maybe you are looking for