Printing to PDF - Acrobat Splits Into Multiple Files - ERROR

Good Afternoon,
I have an excel document of 20 tabs... when I print preview the document, I have twenty pages, and it prints as one document (20 pages.)
When I print to PDF (selecting Adobe as my printer) the Save As dialogue box comes up, as it should. After saving the PDF, it only saves half the pages in the file and a SECOND dialogue box comes up. The result is two PDF documents, each with half my tabs.
I have looked all over excel to find a reason this is... why would Adobe want to split my document for me? It is really annoying to have to combine the PDFs after the fact. What can I do to resolve this?

Excel (not Acrobat) creates separate print job when worksheets in a book have different page setup option.
So check the page setup options for each sheet in the book and ensure they are the same.

Similar Messages

  • Why does a mail-merge in MS Publisher split into multiple files when printed as a pdf file?

    Why does a mail-merge in MS Publisher split into multiple files when printed as a pdf file?

    'Cuz that's what mail merges do.  They create multiple documents based on the parent doc and all the names/addresses in your data tables.
    Perhaps if you describe exactly what you're trying to do & why you need PDF, we can point you to relevant tutorials.
    Nancy O.

  • Split SQR output into multiple files And Rename each file.

    Greetings!
    We ran into scenario where we need to split an SQR output (PDF) split into multiple files (each page , each file). More over the out put has to be renamed with EMPLID.
    It is for printing Advices, where we run DDP003 to print all of them, Our requirement needs to have one PDF file for each employee to placed into a shared drive OR to be emailed.
    I was thinking of running the same process in a loop individually, but this is resource intensive. Is there any way we can batch run this SQR process and split into each page (each paychek comes to one page),
    AND
    I need them renamed by SQR as it creates them, Each file would be names as EMPLID.
    This is all in alternative to run process individually by employee , via self service. to not to over laod Process scheduler server.
    Can anyone help me how can we get these thigns done in SQR?
    Thanks in advance.

    You can use the SQR command new-report for each employee which closes the current report output file and opens a new one with the specified file name (e.g. EMPLID).

  • Split XSLT Output into Multiple Files

    I have an XML-to-File scenario working, but now I need to split my XSLT map output into multiple files based on the data.  I have been reading the Jin Shin blog on message splitting, but don't know that it pertains to my situation.
    XML data getting mapped with XSLT map creates output formatted like this.
    <?xml version="1.0" encoding="utf-8"?>
    <ns1:ColdInvoiceData xmlns:ns1="http://graybar.com/cold/invoice">
    <Header>
      <RecordID>HDR</RecordID>
      <InvoiceNumber>15</InvoiceNumber>
    </Header>
    <Details>
      <RecordID>DTL</RecordID>
      <LineItemNumber>001</LineItemNumber>
      <UnitPrice>1.25</UnitPrice>
    </Details>
    <Details>
      <RecordID>DTL</RecordID>
      <LineItemNumber>002</LineItemNumber>
      <UnitPrice>2.22</UnitPrice>
    </Details>
    <Header>
      <RecordID>HDR</RecordID>
      <InvoiceNumber>16</InvoiceNumber>
    </Header>
    <Details>
      <RecordID>DTL</RecordID>
      <LineItemNumber>001</LineItemNumber>
      <UnitPrice>3.33</UnitPrice>
    </Details>
    </ns1:ColdInvoiceData>
    I currently have this output writing to a file (FTP, File Conversion).  A single file is no issue, but I need to send multiple files for every set of HDR/DTL(s).  I also need to put the invoice number in the filename (which is working fine as a parameter in my single FTP File CC now).
    Can I make this happen with message splitting and maybe a second map (GUI map)?  Do I need to adjust the XSLT output XML format to have an invoice level?  Is there a better way to go?
    Thanks!

    I made a change to the namespace used on the Messages/Message1 nodes (since the system-assigned ns0 was already being used in my xml data) and now I am getting output. 
    The problem is that the output matches my input.  As aforementioned, I started with just a one-to-one mapping on every node and field. 
    When I change the mapping to try to force multiple ColdInvoiceData nodes, I get the following error (when my source has two Invoice nodes):
    <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/ns1:ColdInvoiceData[2]/Invoice. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at
    When my source has one invoice node, it works ok.
    Here is a screenshot of my mapping structure.
    http://webpages.charter.net/kpwendel2/ib.jpg

  • Split download file into multiple files

    Hi all,
    I'd like to split my internal table into multiple files when downloading. The split will be determined by contents of a specific field (e.g. create a new file for every unique country, where country is a key field). The number of files to download can only be determined at runtime.
    Any ideas on how i can resolve this?
    Thanks,
    Chris.

    try this...
    *declare itab1 same as itab
    data : filename(25).
    loop at itab.
    <b>  move-corresponding itab to itab1.
      append itab1.</b>
      at end of BUKRS.
            *use GUI_DOWNLOD    FM here
       *pass itab1 every time here
       *change the filename everytime
         concatenate 'Company_' itab-bukrs into filename.
    <b>   refresh itab.</b>
      endat.
    endloop.

  • Split TempDB Data file into multiple files

    Hey , 
    I have been seeing TempDB contention in memory on our SQL server 2012 Enterprise Edition with SP2 and I need to split TempDB Data file into multiple files .
    Could someone please help me to verify the following information:
    1]
    We are on SQL server 2012 Enterprise Edition with service pack2 but as per SQL Server 2012 Enterprise Edition under CAL Licensing –We are limited to use 20 logical processors instead 40 logical processors. Our SQL is configured
    on NUMA nodes and with the limitation SQL uses only 2 NUMA nodes on live .There are 10 logical CPUs are evenly assigned to each NUMA nodes. Microsoft recommends that if SQL server configured on NUMA node and we have 2 NUMA nodes, then we may add two data files
    at a time. Please let me know should I add two TempDB data file at a time?
    2] We have TempDB Data and log files both on the same Drive of SQL server  .When I split TempDB into two Data files, I can get them on the same Drive .What your recommendation should I need to create TempDB Data files on the same drive or on separate
    disks?
    3] What would be the blackout plan for splitting the tempdb into multiple files? Please let me know if someone has a better back out plan ?
                1] Run script that create tempdb Database with a single file
    2] Reboot SQL service in order to apply change   
    Your help will be apprecited .
    Thanks ,
    Daizy

    Tom , I am seeing TempDB contention on Production server when there is a heavily load on sql server . We also experiencing the overall system slowness.Please look at Pagelatch wait statistics on our server ,Please advise .
    wait_type
    waiting_tasks_count
    wait_time_ms
    max_wait_time_ms
    signal_wait_time_ms
    PAGELATCH_UP
    2680948
    3609142
    10500
    508214
    PAGELATCH_SH
    1142213
    1338451
    8609
    324538
    PAGELATCH_NL
    0
    0
    0
    0
    PAGELATCH_KP
    0
    0
    0
    0
    PAGELATCH_EX
    44852435
    7798192
    9886
    6108374
    PAGELATCH_DT
    0
    0
    0
    0
    Thanks ,
    Daizy

  • Can I export a single file into multiple files?

    Is there an option or a plugin that would allow me to set markers in the audio, and then have Soundbooth export the audio into multiple files?
    As an example, let's say I have a 1 minute audio file. I place a marker at 0:00 and another marker at 0:10 and a third marker at 0:30. I then would select Export Multiple and I would end up with three seperate wav files, one 10 seconds long, the second 20 seconds long and the last one 30 seconds long.
    Thanks

    Hi laforcej
    Open the PDF In Acrobat ...
    Go to Tools -> Pages -> Extract
    Now Select the Page Number you Want to Extract and Save them

  • Can one large pdf be split into a packaged pdf?

    can one large pdf be split into a package without having to extract pages then merged back together?
    i have been scanning documents and some have been over 400 pages.
    i have been creating seperate pdf's for each appendix/section then merging them into a packaged pdf to find each appendix easier.
    but it is a bit time consuming to look at the 400+ pages then removing each appendix.
    so i was wonder if it is possible to just find where all the appendixes start and have them put into package without need to extract each appendix one at a time.

    Graffiti:
    Correct. Knew that about other formats not being able to be seen by all users.
    I tried exporting a PDF to HTML and then couldn't place it in an email without it loosing formating. I'm a long-time PM/ID (even before Adobe) user and am not familiar with Dreamweaver, which I guess I need to learn now. Thanks for the response.

  • I use Exchange to sync my iphone4S with Outlook.  On my iphone, my contacts are split into multiple records if they have more than one email address - how can I consolidate them on the iphone

    i use Exchange to sync my iphone4S with Outlook.  On my iphone, my contacts are split into multiple records if they have more than one email address - how can I consolidate them on the iphone

    I have loaded my Firefox bookmarks into Internet Explorer Favorited. I also uninstalled Safari.
    I go to iTunes on my phone and see no wat to connect my iPhone to my laptop. I see Music, Shows, etc., the kind of stuff I would expect, but no clue as to how to proceed.
    Would you please be so kind to fill me in on how to "That syncing is done via iTunes. Connect the device to iTunes, select it, then go to the Summary page and select to sync bookmarks."?
    I am not sure what you mean by "Summary Page"
    Thank you

  • I am using  MacBook Pro and running 10.8.4. iTunes version 11.0.4. Several of the cd's i have imported recently have been split into multiple albums by ITunes. How do I bring all the bonus tracks together with the original album?

    I am using a MacBook Pro and running 10.8.4. iTunes version 11.0.4. Several of the cd's i have imported recently have been split into multiple albums by iTunes where it has identified bonus tracks. How do I bring all the bonus tracks together with the original album?

    Hello there, Fineshot.
    The following Knowledge Base article might provide some information that should help you resolve the issue you're having:
    Why aren't songs with the same album art grouped together?
    http://support.apple.com/kb/TS1468
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • AppleScript Split text file into multiple files

    I have large text files that I would like to break up into individual files. They are compilations of articles; I want to create a new file for each article, which begins with:
         Document # of #
    I don't think any other lines start with "Document" so that might be fine as a delimiter.
    Also, it would be great if the new files could be named "LAT_1", "LAT_2", etc.
    I found this thread:
    AppleScript separating one text file into many at Paragraph break
    I tried the second script by twtwtw and changed
    set parsingText to "Document"
    but got the following error:
    error "Can’t get item 2 of {\"LAT 1985-1990 local food copy.txt\"}." number -1728 from item 2 of {"LAT 1985-1990 local food copy.txt"}
    I also found this thread but it was too complicated for me to understand. Re: Split a large text file with many entries into separate files
    Can anyone help me modify the script? I've been looking at this as well as Unix commands to use in Terminal, but I'm just too much of a beginner.
    Any assistance is much appreciated!
    Trisha

    Hello
    Here's a modified version of the script in
    Split a large text file with many entries into separate files
    https://discussions.apple.com/thread/5641125?tstart=0
    This will split the given text by delimiter line in the form of "Document # of #" and save each chunk of text from one delimiter to the preceding line of the next delimiter in separate file named after LAT_0000.txt, where 0000 is sequential number starting at 0001.
    Note that any text before the first delimiter is ignored and not saved in output file. You may select multiple input files. Existing file in the destination folder is overwritten. Input text is assumed to be in UTF-8 and each line is termitated by U+000A LINE FEED.
    set ff to choose file with prompt "Choose input file(s)." with multiple selections allowed
    set d to choose folder with prompt "Choose destination folder."
    set args to ""
    repeat with a in {d} & ff
        set args to args & " " & a's POSIX path's quoted form
    end repeat
    do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & args & "
    use strict;
    sub usage () {
        printf STDERR \"Usage: %s output_directory file [file ...]\\n\", $0;
        exit 1;
    &usage() unless @ARGV > 1;
    my $outdir = shift @ARGV;
    unless ( -d $outdir ) {
        printf STDERR \"Not a directory: %s\\n\", $outdir;
        &usage();
    my $i = 0;
    my ($n, $n0, $t);
    while (<ARGV>) {
        if ( /^ \\s* Document \\s+ [0-9]+ \\s+ of \\s+ [0-9]+ .* $/ox ) {
            $n = sprintf('LAT_%04d.txt', ++$i);             # e.g., LAT_0001.txt
            if ( $n0 ) {
                open(OUT, '>', \"$outdir/$n0\") or die $!;  # overwrite
                print OUT $t;
                close OUT;
            ($n0, $t) = ($n, $_);
        else {
            $t .= $_;
    if ( $n0 ) {
        open(OUT, '>', \"$outdir/$n0\") or die $!;          # overwrite
        print OUT $t;
        close OUT;
    EOF"
    Hope this may help,
    H

  • C# Split xml file into multiple files

    Below i have an xml file, in this file, i need to split this xml file into multiple xml files based on date column value,
    suppose i have 10 records with 3 different dates then all unique date records should go into each file . for ex here i have a file with three dates my output should get 3 files while each file containing all records of unique date data. I didn't get any idea
    to proceed on this, thats the reason am not posting any code.Needed urgently please
    <XML>
    <rootNode>
    <childnode>
    <date>2012-12-01</date>
    <name>SSS</name>
    </childnode>
    <childnode>
    <date>2012-12-01</date>
    <name>SSS</name>
    </childnode>
    <childnode>
    <date>2012-12-02</date>
    <name>SSS</name>
    </childnode>
    <childnode>
    <date>2012-12-03</date>
    <name>SSS</name>
    </childnode>
    </rootNode>
    </XML>

    Here is full code:
    using System.Xml.Linq;
    class curEntity
    public DateTime Date;
    public string Name;
    public curEntity(DateTime _Date, string _Name)
    Date = _Date;
    Name = _Name;
    static void Main(string[] args)
    XElement xmlTree = new XElement("XML",
    new XElement("rootNode",
    new XElement("childnode",
    new XElement("date"),
    new XElement("name")
    string InfilePath = @"C:\temp\1.xml";
    string OutFilePath = @"C:\temp\1_";
    XDocument xmlDoc = XDocument.Load(InfilePath);
    List<curEntity> lst = xmlDoc.Element("XML").Element("rootNode").Elements("childnode")
    .Select(element => new curEntity(Convert.ToDateTime(element.Element("date").Value), element.Element("name").Value))
    .ToList();
    var unique = lst.GroupBy(i => i.Date).Select(i => i.Key);
    foreach (DateTime dt in unique)
    List<curEntity> CurEntities = lst.FindAll(x => x.Date == dt);
    XElement outXML = new XElement("XML",
    new XElement("rootNode")
    foreach(curEntity ce in CurEntities)
    outXML.Element("rootNode").Add(new XElement("childnode",
    new XElement("date", ce.Date.ToString("yyyy-MM-dd")),
    new XElement("name", ce.Name)
    outXML.Save(OutFilePath + dt.ToString("yyyy-MM-dd") + ".xml");
    Console.WriteLine("Done");
    Console.ReadKey();

  • Splitting single video into multiple files - workflow improvements?

    I regularly need to split a single video into multiple separate files that are used by other programs.  I'm using Premiere Pro CS4 for a number of reasons including the ability to easily and accurately select a scene by individual frames, native audio and video effects/filters, and the ability to import and export various video types.  I'm open to using other tools, but I haven't yet found one that is even close to Premiere Pro when it comes to accurately selecting split points.
    I'm not a Premiere Pro expert.  I have been doing this for about four months and have read many resources (books, forum posts, help guides) to refine the workflow I'm currently using.  My question:  does anyone know any improvements that might save me time/keystrokes.
    Current workflow:
    I've bound F8 to File > Export > Media
    Import video file
    Open in source monitor
    Set In and Out points for scene in source monitor
    Ctrl-drag from source monitor to Project Panel (creates a subclip)
    Repeat 3 and 4 for all scenes/subclips
    Select all subclips from Project Panel and drag to timeline
    Set work area bar to first subclip in timeline by the following four keystrokes:  Home, Alt-[, PageDown, Alt-]
    Type F8 (File > Export > Media shortcut).  Type output file name, click OK and the first subclip is put in the AME queue
    For the remaining subclips, type: Alt-[, PageDown, Alt-], F8, output file name, OK and repeat until done
    Any thoughts/ideas on workflow improvements?
    Thank you!

    Thank you Hunt.
    For the sake of brevity, I didn't include all of the details about the various aspects of the projects.
    Early on I was doing what you suggested and yes, it is a little quicker.  I learned (painfully) a couple of months later that I sometimes have to go back and adjust the clips and this method (trim to timeline with no subclips) resulted in quite a bit of duplicate effort (to reobtain start/stop points).  I've since learned that managing the "scenes" as subclips in topical bins allows me to go back and make adjustments, long after I've totally forgotten about the project content, without a lot of unnecessary reworking.

  • HT1473 How do I get iTunes to download an entire album in one file versus splitting it into multiple files with the same Album Title?

    I have added several CDs to my iTunes files, several Albums were added in the form of multiple files of the same Album title with random songs listed, but not the entire album in one file.
    I have tried to reassemble the Album into one file, but could not find a way to do so.

    Generally setting a common Album title and Album Artist will fix things.
    For deeper problems see Grouping tracks into albums.
    tt2

  • Splitting program into multiple files

    Hi folks :)
    I have a looong program. And I would like to split it into 4 files. What else do I have to do, then adding the packagename? Could I call variables from one file, that is declared in another? How? And how do i call methods in another file?

    Presumably, you're using Strings and possibly even JTextPanes.
    If so, you already have all the syntax you need.
    Let's assume that your current class contains all the required functionality. You might want to break that up to make the code more maintainable. So, put all the gui code into GUI.java and then wrap up your data processing methods into a Processor.java file. Both of these should define publilc classes.
    But now your GUI class presumably won't compile because you are trying to call methods that don't exist anymore (you've just moved them). So, in you GUI class add a Processor data member (called "dataProcessor"). Instantiate this in the GUI constructor. Now, where you were calling those methods before you need to use:
    dataProcessor.someMethod(someString);You'll probably have to play around a little to make everything fit but the art of refactoring is one to be learned early.
    I hope this gives you the idea you were looking for.

Maybe you are looking for