Printing to shared windows printer over wireless network

Hi,
I just bought my wife a MacBook and recently updated it to Leopard (OS X 10.5). I have a Lexmark X5150 printer connected to a desktop PC running Windows XP. I can share files between the two computers no problem either wirelessly or through an ethernet connection through my router. But, I'm having troubles accessing the shared printer through the Macbook wirelessly. If I connect the printer directly to the Macbook, I can add the printer with appropriate drivers no problem. However, when I try to add the printer as Windows shared printer, the appropriate driver doesn't show up in the drop down list. I can navigate to and find the printer over the network fine, but I just can't find the right driver. I'm a newbie to Mac and was wondering if there is anyway to find the driver using Finder or something similar to determine where it physially resides on the Mac. I know it's there because it is automatically selected when I directly connect the printer to the Macbook and add the printer. Any thoughts??

Couldn't figure things out, so I'll just stick with connecting the printer directly to the macbook.

Similar Messages

Can't print from Windows PC to printer on I-Mac USB over wireless network

I am a brand new Mac user after years of Windows frustration.
Canon i9100 connected to I-Mac via USB. Prints OK from I-Mac. Print share enabled. Windows share enabled.
I-Mac on wireless LAN with static IP addresses for all devices.
Dell Windows XP on same wireless LAN.
Can ping I-Mac OK.
Added printer on Dell through Windows XP using I-Mac static IP address and I-Mac printer name - installed OK, but will not print.
After hours on Apple Support, found and downloaded Bonjour for Windows and installed on Dell. Ran Bonjour on Dell, installed printer OK, but still won't print from Dell.
Very frustrating and I haven't started on my VPN issues yet - thought Apple would be far simpler.
Wotto
I-Mac Intel Mac OS X (10.4.5) Dell Inspiron Windows XP

On Windows, after either method of setup, change the driver (on PC) to Apple Color LaserWriter. Apple print queues expect postscript as input.
If this is unsatisfactory, you can create a RAW queue on the Mac (only for sharing the printer, because it will have no driver associated):
http://www.stocksy.co.uk/2004/03/printingto_103x_pantherwith.php
(This guide mistakenly says it doesn't apply to Tiger - but it DOES)

Printing to shared windows printer - used to work, doesn't now

Once upon a time I was able to print from my powerbook to the HP LaserJet 1300 connected to my father's windows computer. I was wireless and the windows pc is wired to the network. I could see all the computers on the network and i could print and file share "normally."
Last year we made several changes to the network, which should have just simplified it, but now I cannot see the printer or any other computers on the workgroup from my mac. My windows desktop can do it fine (also wired) and my fathers wireless windows laptop can as well. I can connect to file share with my mac if I use the IP of the computer, I can no longer just browse the network like i could before.
I am not sure how to access the shared printer now. I have tried different things over the past year and I am just tired of having to get a USB cable and stand next to the printer with my laptop.
I have tried to just connect using the ip of the computer the printer is shared from but that does not work.
"smb://username:[email protected]/printersharename"
doesn't work.
I have theorized that it might be that there is now MAC address filtering enabled for wireless connections but I cannot turn it off to test.
Has anyone else encountered this (being able to, then unable)?
Powerbook G4 1.5ghz Mac OS X (10.4.9)

It sounds like maybe you have a wired router and
added an Airport base (or other wireless router) for
wireless? If I've guessed wrong, please describe your
network and check whether the wired and wireless
computers are in the same subnet (that is, only the
last part of 192.168.1.x can be different, the first
three parts are the same on every computer).
The some of the wired computers go through a switch, but some go straight into the router (because they are closer to the wireless router than to wall jacks). This doesn't seem to affect my ability to see them on the network because I can't see any from my powerbook. Everything is on the same subnet and the only devices are the router and the switch, but I can't see stuff hooked directly to the router either.

Print to Shared Windows Printer (PSC 1315)

I'm a Windows tech with a problem on my spanking new Intel MacBook.
I have a PSC 1315 connected via USB to an XP desktop PC.
I can print to the 1315 from the desktop with no problem.
Other Windows based PCs on my home network can print to it via a generic SBC router, which is handling network traffic and Internet access.
I have downloaded the OSX drivers for the PSC 1315 from the HP website and successfully loaded them onto the MacBook.
The HP Assistant that pops up asks me to add the HP printer that's either connected via USB or via IP. I have to bypass that setup. You'll see why below.
On the Mac I can not only see the folders that are shared from the desktop PC, but I can ALSO see the shared 1315 printer from across my wireless network. I can access shared files from the desktop on my Macbook.
So far, so good, right? Not.
I can't print to the PSC 1315 across my wireless network. All jobs go into a 'completed' mode but the printer never sees them. The driver that loads when I make the PSC 1315 my default printer on the Mac is 'generic postscript'. The PSC is not a postscript printer. I have scrolled down the list of HP printer drivers that are listed and can't find the PSC series listed anywhere. The HP drivers that I downloaded from the HP website for this printer are apparently only good for directly connected or print server-based PSC series printers - NOT for printers available as shared from an XP computer. In addition, the driver I downloaded from the HP website doesn't add itself to the large list of HP drivers that appear to be native to the Mac OS.
It gets better. I have Parallels loaded on the MacBook, with a copy of XP. When I fire up XP I can print to the PSC 1315 across my wireless network with absolutely no problem. Just like all of my other PCs and notebooks.
Back to the Mac OS side. I've discovered that one can access some sort of printer admin program using 127.0.0.1:631/printers. This is a 'CUPS' interface (I have no idea what CUPS is). I have tried to use this interface to further configure the PSC 1315 printer that shows up on that page, but to no avail.
I can only assume that the PSC 1300 series set of printers is just not designed to be accessible from a MacBook across a wireless network.
If anyone can dispute that I would love to hear about it. Until then, the only way I can print is if I fire up XP using Parallels when I want to print wirelessly.
Intel MacBook Mac OS X (10.4.7)

For what it's worth, let me provide you some background and other ideas. As a Windows tech, you should be able to understand more why things might be failing with some basic background and other ideas.
I've discovered that one can access some sort of printer admin program using 127.0.0.1:631/printers. This is a 'CUPS' interface (I have no idea what CUPS is).
CUPS (Common Unix Printing System) is the printing system used in Mac OS X. It runs its own server which can be accessed on your localhost at <http://127.0.0.1:631>. Apple has made additions to the CUPS software as distributed by cups.org, so the web interface does not provide access to all the extras Apple has added.
CUPS is uses "front end" drivers and/or filters. The data to be printed is manipulated into a form that the particular printer can understand. This information is then handed off to the "backend" which handles the communication between the computer and the printer.
The HP drivers that I downloaded from the HP website for this printer are apparently only good for directly connected or print server-based PSC series printers - NOT for printers available as shared from an XP computer.
As you have found out the drivers HP supplies are limited and will only work when the printer is connected in certain ways. This is a limitation set by HP, not the Mac OS or the CUPS printing system. For whatever reason, the major printer manufacturers have essentially bypassed CUPS. They use just enough of it to direct the print job back to their own proprietary software. No real "frontends" and certainly none of the CUPS "backends" are used.
In order to print to a printer connected to a Windows computer, we must therefore turn to drivers that integrate with CUPS and can use the "smb" or samba backend that Apple provides. The hpijs and the Gutenprint (Gimp-Print) drivers fulfill this role.
At present there is not a specific PPD for the HP PSC 1315 in either package. That is most likely why the Generic PostScript PPD was assigned. The OS tries to match the manufacturer and printer model that the printer relays to the OS with a PPD that is exactly the same. When this fails, the system falls back to whatever default is specified in the software.
Does that mean that the PSC will absolutely not work? No. HP shows that the PSC 1315 is part of the 1300 series. A 1300 series PPD does exist within the hpijs driver set. It will show in the list of printers as "HP PSC 1300 Foomatic/hpijs". You can manually select this as your PPD.
I removed the driver (HP) anyway and downloaded the HPIJS set.
This is good. Did you also remove any HP files from the /Library/Printers/PPD Plugins directory? Please do if you have not already done so. You will have to kill off a number of processes before you are fully rid of these plug-ins. Perhaps the easiest way is to just restart the computer after you trash the PPD Plugins. It is important to be sure these are disabled. Just having the HP supplied drivers installed will most likely "tie up" the printer and make it unavailable to any other driver set. The PSC is an all-in-one machine. The HP software ties up the continuously looking for the command to start scanning.
Windows already is sharing the printer. I'm trying to connect to it over my wifi network.
I think Apple just doesn't support the PSC1315 that way.
Apple, just like Windows, doesn't "support" any particular printer. Nor do they write the drivers for them. Greg is more of an expert at Windows printing from a Mac than most of us. He can correct me if I am wrong, but I think all the necessary elements should be available to make your combination work. Make sure you have gotten rid of all or disabled the HP supplied software and try manually selecting the "HP PSC 1300 Foomatic/hpijs" printer within the context of the Windows printer sharing article Greg cited.
Hope this helps.
Matt
Mac Mini; B&W G3/300

Problems Printing to Shared Windows Printer Via SAMBA (foomatic error 255)

I can NOT print from my MacBookPro to a printer that's shared out from my Windows PC. Of course, printing to this same printer from my PC works fine.
Please help me resolve this printing problem.
Read on for more details regarding my printing woes!
I can successfully setup my printer on the MAC side using the Printer Setup utility. I see the shared out printer on my MAC; I can pick the printer's manufacturer and model. Everything looks ok regarding the setup of the printer on the MAC side.
However, when I try to print a file from the MAC, the printer never prints. The print job appears to get queued on the MAC side. However, after a few seconds, the printer queue displays "foomatic-rip stopped unexpectedly with error 255" (if I selected a foomatic printer driver from the hpijs). Otherwise, it says "NTSTATUS_NOMEMORY" error (if I selected a gutenprint driver instead).
The PC's Windows event logs show no problems. Indeed, the Security event log shows successful authentication & access to the printer.
The MAC's CUPS error_log displays the these error messages:
GutenPrint fails with NTSTATUS_NOMEMORY error, then says Cannot connect to SAMBA host
hpjisGhostscriptFoomatic fails with "The process 'foomatic-rip' stopped unexpectedly with status 255"
Later, I will post the exact entries from this log (I am currently separated from my MAC laptop until later this evening).
My Apple MacBookPro is running MAC OS X 10.4.11 ("Tiger"). The printer is an HP DeskJet 5150 connected via a USB port to my DELL 8400 PC. This desktop PC is running Microsoft's "Windows XP Pro Service Pack 2").
Based on reading other posts (here) and at the Linux Open Foundation (printing), I have already done the following:
Installed gutenprint;
Installed foomatic (foomatic-rip v3.42.2.15);
Installed ghostscript (espgs v7.07.1); &
Installed hpijs (hpijs v2.7.10).
NOTE: This is NOT the same problem that I posted earlier regarding inability to print to a shared printer with Leopard (MAC OS X 10.5.0). Today's posting deals with my inability to print to the shared printer from Tiger (MAC OS X 10.4.11).
NOTE: This may be a "red herring" but you may need this additional background to help resolve my printing problem. Originally, I ran "Tiger" (MAC OS X 10.4.10) on my MacBookPro laptop. Of course, networked printing worked fine at this point. On October 28, 2007, I upgraded to "Leopard" (MAC OS X 10.5.0). Leopard was a "disaster" for me (printing, networking & many other problems). On November 9, 2007, I "punted" and re-installed "Tiger" (MAC OS X 10.4.10) from Apple's original CD. On November 15, 2007, I upgraded to MAC OS X 10.4.11 via Apple's software update utility. I vaguely recollect that networked printing was working after I returned back to Tiger.
/s/
Tony H.

As promised in my initial post regarding my printing problem, here are the actual error messages displayed in the Print Queue (Hp5150) and the "cups" error_log when I try to print any file to my HP 5150 that's directly connected to my DELL PC (Windows XP Pro) but shared out so that my MacBookPro should be able to print to it.
Printer Queue Hp5150 window displays:
=========================
The process "foomatic-rip" stopped unexpectedly with status 255.
/var/log/cups/error_log displays:
=====================
I [04/Jan/2008:20:25:17 -0500] Job 3 queued on 'hp5150' by 'anthonyhackenberg'.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/cgpdftops (PID 681) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/pstops (PID 682) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 683) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started backend /usr/libexec/cups/backend/smb (PID 684) for job 3.
E [04/Jan/2008:20:25:17 -0500] [Job 3] Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:25:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...Insecure $ENV{PATH} while running setuid at /usr/libexec/cups/filter/foomatic-rip line 215.
E [04/Jan/2008:20:25:17 -0500] PID 683 stopped with status 255!
I [04/Jan/2008:20:25:17 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [04/Jan/2008:20:26:17 -0500] [Job 3] Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:27:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:28:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY
Again, the system Event logs on the Windows XP side show no error messages. In particular, the Security Event Log shows that authentication was successful; so, the MacBookPro's client process was granted access to the printer on the DELL PC side of the transaction.
Message was edited by: ClassicalApproach

Printing to shared Windows printer fails after Yosemite upgrade

Running Mountain Lion had a working shared printer from Windows 7 Pro - a Canon MX310.
After upgrade the printer is still there but trying to use it results in "Support Code : 306 A communication error has occurred..."
Tried deleting the printer then re-adding. The OS X printer app finds the printer in the windows workgroup, appears to have a little chat then says its added ok. Same Error.
Tried a reset of the mac printing system - same.
Printer is working on the host PC and from other network windows PC.
Anyone else seen similar issue?

I can't claim any experience with this printer. I am going on what the "specs" say should work.
There are three software pieces needed to set up this printer. For the first two, you will need to download and install both the Foomatic-RIP software and the ESP Ghostscript software from <http://www.linuxprinting.org/macosx/foomatic/>.
For the third item, you will need to download the PPD for this printer from <http://www.linuxprinting.org/show_printer.cgi?recnum=Canon-BJ-200>. Place the PPD in the following folder (make any folders that are not already on your system):
/Library/Printers/PPDs/Contents/Resources/en.lproj
This setup will use the bj200 device that is built into Ghostscript. The notes that I find in the device driver indicate that this is using the BJ-10 command set. The manual for the bj-200e shows that this is one of the languages it can use. There might be some DIP switches you need to set to make things compatible with this command set and/or the line spacing set forth in the device driver.
Let us know how this goes.
Matt
Mac Mini G4; B&W G3/300

Printing to Shared Windows Printer (printer not listed)

Hi
I have an iMac with an intel processor running Leopard 10.5.2.
I have a Canon iP1800 connected to a windows xp PC and I am wanting to print to this printer over my network.
I can see the printer no problem and Mac OS will let me connect to it but my printer is not listed in the driver list.
I have been on Canons website and downloaded the correct driver thats supposed to work with Leopard but even once I have installed this the printer still does not appear in the list.
I'm sure this world work if I could only point Mac OS to the location of the printer driver.
So my question is, how do I get my printer to appear in the list? or is there another way of doing this.
Thanks
Ricky55

When you say it doesn't show up for windows printing what do you mean?
When I go to add a printer by clicking the + button I then select windows and the printer shows up there fine but when I click on the drop down menu print using, select a driver to use this is where it doesn't show up. Is this what you mean?
If so I have been on the Gutenprint website but my printer is not listed. If I install the latest version would this work for me? What would I select in the print using drop down menu?
Thanks

Can no longer print to shared windows printer after leopard upgrade

Hi guys,
I know this is a topic that has come up before, and I have gone through the support forums trying to resolve this on my own, but I am at a roadblock. Printing used to work on Tiger, and now it doesn't, and I simply don't know how to debug the problem any further. Hopefully someone here can help me help myself... In the meantime because of this issue, and several others, I've had to "downgrade" back to Tiger.
Here are the "facts".
1. I have a Epson Stylus R300 printer.
2. Printer is connected to windows XP box.
3. Said xp box is on network at 192.168.1.101
4. Mac ip is 192.168.1.102
5. Windows workgroup name is sutter_wg
6. shared printer name is stylus_pc
I have added the advanced tab to the add printer dialog and thus have access to directly putting the address of the printer. I don't really understand samba - I was only able to get it to work on Tiger by reading through the support forums. I have not been as successful with the Leopard support forums. I'm doing the following from memory as I'm not currently at my mac... anyway, this is the address I used to "add" the printer.
smb://192.168.1.101/stylus_pc
smb://192.168.1.101/sutterwg/styluspc
When I go to print, it is placed in the print queue and nothing happens. No error message, and no print. Looking at the print queue, it's in the stop state. But I don't get any information on why it went to stop that I can use to debug. Did it not resolve the ip? Was there some kind of permissions problem? Is there a printer driver incompatibility? I don't know. I don't know how to find out.
So here's what I've done so far from a debug point of view.
1. I've proved that I can connect to the windows box in Leopard via the "go to server" option in Finder.
2. I've connected the stylus to the mac directly and printed from there. No problems. Interestingly though, it's a different printer driver. When I connect the printer up directly, the printer driver is for Epson Stylus R300, my exact printer. However when I add the printer via the network, the best I can do is a generic "epson stylus" printer driver. I went to epson web page to download the latest driver, and they only have drivers for 10.4. No 10.5. Apparently Leopard has a 10.5 driver built in since it used it when I connected directly, but that driver does not appear to be available when I add the printer via the network. What gives?
So that's where I'm at. If anyone has any help to offer, I'd much appreciate it.
Thanks!
-Kris

I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors.

Unable to print to shared windows printer (lexmark)

My Windows printer is shared on the network through an XP machine. Other XP PCs can see and print fine to the printer , but not my OS X (tried it with tiger and Leopard). The printer is Lexmark P6250, and the mac driver for that printer works fine because the printer works fine when it is directly connected to my mac via USB.
When looking for the printer through my MAC OS X, it can locate the printer on the windows network , no problem, but when I try to print anything from the mac to the windows network printer, Mac os x returns a communication error indicating that it cannot communicate with the printer. I have all firewalls on my windows PC disabled , and port 139 is open.
Can anyone help in resolving this problem ?

Carlito5 wrote:
The printer is Lexmark P6250, and the mac driver for that printer works fine because the printer works fine when it is directly connected to my mac via USB.
That is a limitation of the Lexmark drivers. There are no network capable drivers for this Lexmark printer either from Lexmark or from the open source developers. You can, however, print to the printer on the Windows comptuers by using a redirected printer as outlined in the following web page
http://iharder.sourceforge.net/current/macosx/winmacprinter/
Matt

Issues printing on shared Windows printer

I'm trying to print on an HP LaserJet 1020 shared by a Windows XP computer. I shared the printer on XP, found it on the Mac, and added it as my default printer. (using the generic Postscript driver) When I hit Print on TextEdit, the document chugs for a moment and is sent over. Sometimes I'm asked for login credentials, which I supply. On the PC, I can see a "Remote Downlevel Document" in the print queue.
But that's where it stops -- the document never comes out. I don't see any error messages on either side, the document is just stuck in the queue. I've tried restarting all computers and printers, but nothing seems to make it happy.
What can I try next?

I had to set up a Unix printer server on my XP with the printers. After following the directions I had to change some of the printer settings ports - was pretty easy to set up and worked for me. The link has directions to set up xp printer.
http://support.microsoft.com/kb/324078

Problems Printing to Shared Windows Printer

After upgrading to Leopard (Mac OS X 10.5), I can no longer print to my HP DeskJet 5150 printer from my Apple MacBookPro laptop. This Deskjet printer is NOT directly connected to the laptop. Instead, it's directly connected to my Windows PC (via USB port). This printer is shared out from the Windows PC.
I see the following error messages in the Printer Queue display every time I try to print something to that Windows shared printer:
"Connection failed: NTSTATUS_CONNECTIONREFUSED"
"Unable to connect to CIFS host, will retry in 60 seconds..."
In addition, every print attempt requires me to enter my Windows authentication credentials:
userid (on my Windows PC)
password (on my Windows PC)
I am absolutely sure that I have entered those credentials correctly. Yet, the error message above would seem to imply that Windows rejected my credentials for some reason. On the Windows side, the Security Event log entries appear fine (no corresponding failure gets logged when the print attempt fails).
Of course, my printing to the shared out from Windows PC WORKED FLAWLESSLY under "Tiger" (Mac OS X 10.4.x). My problem started immediately after I upgraded to "Leopard" (Mac OS X 10.5) on October 28, 2007.
Please advise me how to resolve this printing to a Windows shared printer problem.
Thanks in advance,

I'm having the same problem. Sharing an HPLJ5MP on WinXPSP2 box, and printer sharing was working fine under Tiger. After installing Leopard, can see and set up printer, but attempts to print test page are thwarted. Log:
I [05/Nov/2007:15:27:27 -0800] [Job 495] Started filter /usr/libexec/cups/filter/pstops (PID 312)
I [05/Nov/2007:15:27:27 -0800] [Job 495] Started backend /usr/libexec/cups/backend/smb (PID 313)
E [05/Nov/2007:15:27:29 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:27:29 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:27:29 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:27:29 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:27:29 -0800] [Job 495] Unable to connect to CIFS host, will retry in 60 seconds...
E [05/Nov/2007:15:28:29 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:28:29 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:28:29 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:28:29 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:28:29 -0800] [Job 495] Unable to connect to CIFS host, will retry in 60 seconds...
E [05/Nov/2007:15:29:30 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:29:30 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:29:30 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:29:30 -0800] [Job 495] Connection failed: NTSTATUS_CONNECTIONREFUSED
E [05/Nov/2007:15:29:30 -0800] [Job 495] Unable to connect to CIFS host, will retry in 60 seconds...
E [05/Nov/2007:15:30:30 -0800] [Job 495] Unable to connect to CIFS host after (tried 3 times)
E [05/Nov/2007:15:30:30 -0800] PID 313 (/usr/libexec/cups/backend/smb) stopped with status 1!
I [05/Nov/2007:15:30:30 -0800] Hint: Try setting the LogLevel to "debug" to find out more.
I [05/Nov/2007:15:30:30 -0800] [Job 495] Backend returned status 1 (failed)
I [05/Nov/2007:15:30:30 -0800] Saving printers.conf...
Hope someone can post the fix...

HP Photosmart 5510d can't be printed to by 2 laptops over wireless network

Computer 1 - Vista 32 Pro
Computer 2 - Win 7 64 Premium
Both have current drivers. Both can find the printer. Both can cancel print queue jobs.
Both get the "The printer is not connected" or "printer is not online" error.
I've checked the IP addy: 192.168.1.101
There is a desktop system that is able to print to the printer - it is located directly next to the printer, but prints wirelessly. I moved one of the systems into the same room as the printer; no dice. We've even had the "next door" computer wake up - and the printer still doesn't do diddly in regards to the laptop.
At least one system is able to access the Printer Assistant - and see what current ink levels are, which match what the printer self-page spits out. (I haven't tested it w/ the other laptop).
Help?

Set a static IP in the printer outside the DHCP range of your router. Use a fixed channel like 1,6 or 11, never 'auto'. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Printing to shared windows printer canon bj-200e

Hi,
Has anyone had any success with or know how to set up printing to a canon bj-200e which is shared on a windows XP machine? I've gone through as many of the directions as I could find but haven't had much luck. There doesn't appear to be any OS X drivers for a canon bj-200e (presumably because it's very old to say the least), but I was hoping a driver for a different canon printer might do just as well. Any help or info would be great, thanks!
-Derrin
MBP Mac OS X (10.4.7)

I can't claim any experience with this printer. I am going on what the "specs" say should work.
There are three software pieces needed to set up this printer. For the first two, you will need to download and install both the Foomatic-RIP software and the ESP Ghostscript software from <http://www.linuxprinting.org/macosx/foomatic/>.
For the third item, you will need to download the PPD for this printer from <http://www.linuxprinting.org/show_printer.cgi?recnum=Canon-BJ-200>. Place the PPD in the following folder (make any folders that are not already on your system):
/Library/Printers/PPDs/Contents/Resources/en.lproj
This setup will use the bj200 device that is built into Ghostscript. The notes that I find in the device driver indicate that this is using the BJ-10 command set. The manual for the bj-200e shows that this is one of the languages it can use. There might be some DIP switches you need to set to make things compatible with this command set and/or the line spacing set forth in the device driver.
Let us know how this goes.
Matt
Mac Mini G4; B&W G3/300

Cannot Print to Shared Windows Printer (Solved)

I'm having lots of difficulty printing. I have Arch installed on both my desktop and laptop, and they're both exhibiting the same problem. I am trying to print to a network printer connected to a desktop running Windows XP. Neither Arch system has difficulty detecting nor configuring the printer (a Canon Pixma MP500), but whenever I attempt to print, I get a "Can't create temporary file" error in the CUPS web interface. I also have Kubuntu installed on my laptop, and network printing works just fine there. It sounded like a permissions problem, so I compared permissions of /var/spool/cups and its contents on my Arch installations to my Kubuntu installation, but they're both configured exactly the same. I also made certain to double-check cupsd.conf, but I can't find anything wrong there (and my user is a member of the lp group). I've also attempted removing and re-configuring my printer, but that didn't work. So to put it simply, I'm stumped. I can't figure out why I don't seem to have access to /var/spool/cups/tmp.
$ ls -l /var/spool
drwx--x--- 3 root root 4096 Jul 25 18:36 cups
$ ls -l /var/spool/cups/
drwxrwx--- 2 root lp 4096 Jul 25 17:58 tmp
$ ls -l /usr/share/cups/banners
-rw-r--r-- 1 root root 225 Jul 22 03:23 classified
-rw-r--r-- 1 root root 225 Jul 22 03:23 confidential
-rw-r--r-- 1 root root 225 Jul 22 03:23 secret
-rw-r--r-- 1 root root 225 Jul 22 03:23 standard
-rw-r--r-- 1 root root 225 Jul 22 03:23 topsecret
-rw-r--r-- 1 root root 225 Jul 22 03:23 unclassified
$ ps aux|grep cups
root 683 0.0 0.1 82192 5948 ? Ss Jul24 0:01 cupsd -C /etc/cups/cupsd.conf
My cupsd.conf: http://dl.dropbox.com/u/1096935/cupsd.conf
My error_log.1: http://dl.dropbox.com/u/1096935/error_log.1
So, any ideas?
Edit: Problem is now resolved via a recent cups update.
Last edited by Axlin (2012-09-04 23:33:42)

I'm having lots of difficulty printing. I have Arch installed on both my desktop and laptop, and they're both exhibiting the same problem. I am trying to print to a network printer connected to a desktop running Windows XP. Neither Arch system has difficulty detecting nor configuring the printer (a Canon Pixma MP500), but whenever I attempt to print, I get a "Can't create temporary file" error in the CUPS web interface. I also have Kubuntu installed on my laptop, and network printing works just fine there. It sounded like a permissions problem, so I compared permissions of /var/spool/cups and its contents on my Arch installations to my Kubuntu installation, but they're both configured exactly the same. I also made certain to double-check cupsd.conf, but I can't find anything wrong there (and my user is a member of the lp group). I've also attempted removing and re-configuring my printer, but that didn't work. So to put it simply, I'm stumped. I can't figure out why I don't seem to have access to /var/spool/cups/tmp.
$ ls -l /var/spool
drwx--x--- 3 root root 4096 Jul 25 18:36 cups
$ ls -l /var/spool/cups/
drwxrwx--- 2 root lp 4096 Jul 25 17:58 tmp
$ ls -l /usr/share/cups/banners
-rw-r--r-- 1 root root 225 Jul 22 03:23 classified
-rw-r--r-- 1 root root 225 Jul 22 03:23 confidential
-rw-r--r-- 1 root root 225 Jul 22 03:23 secret
-rw-r--r-- 1 root root 225 Jul 22 03:23 standard
-rw-r--r-- 1 root root 225 Jul 22 03:23 topsecret
-rw-r--r-- 1 root root 225 Jul 22 03:23 unclassified
$ ps aux|grep cups
root 683 0.0 0.1 82192 5948 ? Ss Jul24 0:01 cupsd -C /etc/cups/cupsd.conf
My cupsd.conf: http://dl.dropbox.com/u/1096935/cupsd.conf
My error_log.1: http://dl.dropbox.com/u/1096935/error_log.1
So, any ideas?
Edit: Problem is now resolved via a recent cups update.
Last edited by Axlin (2012-09-04 23:33:42)

Printing from MacBook to a shared Windows printer

I am having a great deal of dificulty setting up my MacBook to print to my shared windows printer. I have tried doing some reasearch on the web and have found a number of difierent atricles and I still could not get it to work.
I have also called apple support and they "can't" help because they think it's not an Apple issue. I'm not convinced.
I am running 10.4.6 and Windows XP, and my printer is a Brother HL 1430.
When I try to create a new printer on my MackBook, I click on the "More Printers" button and I select Windows Printing, Workgroup and I see the windows computer. I click on the windows machine and click Choose.
So far so good. I get a password authentication dialog box asking me to connect to the PC. I type in my account details and it is at this point that it fails.
I cannot seem to connect to the PC via this method. I am using the correct username and password - I have tried repeatedly, and I also tried setting up another account and that too failed. Both accounts were admin accounts.
When I try the username / password, I get an error informing me it cannot connect to the server with the provided username / password.
However, I do have file conectivity to the PC and I can access it's harddrive.
The strange thing is - I tried using no account name / password and it passed the authentication and I was able to see my shared printer. I set it up and it failed to print. I have since deleted this setting and I cannot replicate it. I dont understand why it rejects my account details and why it accepted blank account information, and why it no longer accepts the blank details.
I think something weired is going on here and Apple were unable to help.
I have tried using the Advanced settings via SAMBA - however, this too fails.
I am out of ideas and this is really bugging me - I have wasted over 3 hours and I still cannot print.
Can someone please help!!
Thanks.

Is your 'Brother' brand printer, compatible for BOTH Mac and PC? if so, it should/may have come with driver/installation software for both, (on opening the file, are thier/appear to be 2 set's of driver/instruction files).
If not, I would contact Brother at tech support, and ask if they have new/updated drivers, so the model will work on both PC's and Mac's. I'm running a 3rd party peripheral, that came with the above, i.e, 1 CD/driver installation file, 1 set is for Windows, 1 set for Mac, I installed it on both, and it's flawless.
The exception, I had to download new drivers for this to work w/ Win..ws XP with Service Pack 2, (it came with Mac drivers, and PC, but only for Win..ws XP, not Win..ws XP w/ Service Pack 2, hope this helps, and will watcgh for repost. GS
imac17" intel Core Duo Mac OS X (10.4.6) Mac/PC Hybrid, always getting better and better!

Printing to shared windows printer over wireless network

Similar Messages

Maybe you are looking for