Printing to the network via USB Ethernet

I have a pair of MacBook Air's that are using the USB Ethernet adapter to connect to the local ethernet (wireless is not an option, all workstations must be wired while in-house.)
The problem I run into is that both of these MBA's will loose their connectivity to the printers, or their ability to see bonjour devices at all, or Appletalk devices. In particular, I've installed a set of OkiData printers on the network which support both Bonjour & Appletalk. When I setup the printers as IP printers, they seem to work fine. However, if they, or any other printer, is connected as a Bonjour device, eventually the MBA stops recognizing/seeing/looking up Bonjour items on the network.
Any thoughts on why this is or how to correct it would be really useful, especially since some day the users might like to do some bonjour-based file sharing.
Thanks!

I have a client with the exact same problem. No bonjour when attached via USB ethernet (Apple's own) SOMETIMES. However, I've noticed that if she unplugs and tries the other usb slot, it seems to work (immediately, no reboot). I've actually only told her to do this over the phone, but it has worked at least twice.
One problem here is that the printers are NOT accessible via bonjour over WLAN, since the WLAN is at least 2 different C class networks.
The other is that due to the setup of the printers and crap drivers from Ricoh, using personalized printer queues only works over Bonjour and not TCP. Thus, only USB ethernet can be used for printing. It would be very interesting to hear if changing usb ports might help in your case as well. This particular client has a late 2010 MBA 4G/128G, but at the same department there are at least 7 MBAs where no-one has had the same problem. Either that, or they had it but never told me.

Similar Messages

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

Trying to update firmware on my canon printer MG5320 but in doesn't recognize the printer being plugged in via USB cable

I am trying to update firmware on my canon printer MG5320 to be able to use the airprint feature but in doesn't recognize the printer being plugged in via USB cable. I have tried restarting the macbook, turning on and off the printer, repairing permissions, deleting and redownloading the update what else can I do? The prinyrt works fine otherwise...

If there are no drivers for Yosemite you might be in trouble.. HP will tend not to support printers once they are EOL.
Getting it running over wireless rather than USB might be worthwhile.
Can’t connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Has the printer been working and now failed after update.. what update caused the failure if that is the problem??

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
Post back on your results.

HP Deskjet 3550 cannot print using Airport Extreme via USB connection on Windows 7 64 bits

Product Name and Number: HP Deskjet 3550 Inkjet Printer
Operating System installed: Windows 7 Home Premium 64 bits
Error message: None
Any changes made to your system before the issue occurred: Setting up HP printer using Airport Utility to add a new printer and installed Bonjour Print Wizard.
Problem: My printer is already set up using Airport Utility. When I print something, the printer doesn't do anything. Is there something I haven't done lately in order to get this printer working using my wifi router?
Suggestion #1: Are the print jobs getting stuck in the print queue? You can check this by clicking on the printer icon in your task tray by the clock.
Error Message #1: Yes, the print job got stuck in the print queue, but the moment, it disappeared from the print queue and the printer doesn't print at all. This is frustrating.
Suggestion #2: Does the printer work as expected if you connect it directly to the PC via USB?
Error Message #2: Yes, the printer works if I connect it directly to my PC via USB, but I don't understand why it wouldn't work with the wifi router, though.
Suggestion #3: This has to do with the way the router handles the connection to the printer. I found another thread, regarding this issue, and it has some information that may help resolve it.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Print-Problem-Using -USB-Printer-on-Airp...
If that does not help, I would recommend posting on the Apple forums, as they may have more expertise with the router's abilities:
https://discussions.apple.com/community/wireless/airport
Error Message #3: After clicking on the first link that you posted, it was very helpful, but the printer couldn't print completely and somehow it would stop at the quarter of a paper. It looks incomplete when I took it out from my printer. It does that every time.

UPDATE!
Problem solved! So this is just a followup in case someone else ever stumbles into these boards with the same or similar problems as mine, that is, trying to run an HP Deskjet D1500 series printer [mine's a D1520] on an Airport Extreme wifi router's USB port as a network printer [with the Airport Extreme controlled by an ancient G4 PowerMac Quicksilver currently running OS X 10.4.11).
Although it probably SHOULDN'T matter, since this type of printer works fine with just the Tricolor cartridge as shipped when hooked up directly to a computer's USB port, on a hunch I got a black HP cartridge (that's a type 21, not type 22 as I had earlier said), slapped it in, tried a test page, and all's well. So, we can call off the technoid hounds. Everything running perfectly.
I hope this message in a bottle may help someone else out there some day soon who may be scratching his or her head with a similar stumper. And just to recap those important Windows printer settings, they are:
* [Printer Properties--> Ports--> Add New Port...] "Standard TCP/IP Port"
* [Configure Port] IP Address "10.0.1.1" and Port "9100"
Best of luck!
Bilgey

HT2275 Do I need to choose "Share this printer on the network" for printers that are not connected directly to my MacBook Pro? I have two HP printers connected to an Airport Extreme (WiFi turned off). I connect by WiFi to another Airport Extreme w cable t

I have three Airport Extreme (AE) routers in my home network.
The main AE is set up for wifi access. The other two are connected by ethernet cables to the main AE. My MacBook Pro connects to the network wirelessly through the main AE. The AE in my office has two HP printers connected to it by ethernet cables. I have a Kodak All-in-one that is connected by USB to my MacBook Pro.
I reset my printer connections on my MacBook Pro and had to add all the printers back to my printer list. I don't know if I understand what the checkbox "Share this printer on the network" in the Print & Fax System Preferences window is for. My guess is that I don't need to share printers unless they are connected to my MacBook Pro by USB, so I should uncheck the "Share this printer on the network" box for the two HP printers that are connected to the AE. I print to them over the network, but they're not connected directly to any computer. I thought if my MacBook Pro wasset to share them and was shutdown, the printers might not be available to my Mac mini or Dell PC, which connect by ethernet to the office AE (which has the two printers connected to it).
What should I do?
For printers connected directly to a Mac (or PC) by USB, check the "Share this printer on the network" box? In my Sharing Preferences, I check "Share Printers."
For printers connected to the AE by ethernet, UNcheck the "Share this printer on the network" box on my Macs (& PCs?) when I add the printers to my printer list? In my Sharing Preferences, I UNcheck "Share Printers?"
FYI
HP LaserJet Firmware Update Utility for HP P2035n is available
Version: 20120105 (19 Mar 2012)
Operating System(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7
File name: P2035_FW_Update_Utility_20120105_v1_4.dmg (3.8 MB)
line: <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=lj-94537-3>

Question is - will the 2 networks (using auto channel negotiations) exist well in the same house or will there be interference?
Things will be fine since the AirPort Express or AirPort Extreme will automatically search for a good wireless channel. If you assign a separate name for the wireless network, then devices will need to log in separately to this network. The extending device will need to be configured in Bridge Mode.
My suggestion would be to configure what is known as a "roaming" network in your question #2. In this case, you would assign the same wireless network name, security and password settings to the extending device and configure it in Bridge Mode.
The advantage to #2 is that you will be able to walk your laptop from a location near the Time Capsule and as you move close to the extending device, the laptop will automatically switch to pick up the stronger signal from the extending AirPort.
You are actually creating a separate network in #2, so you have the advantage of maximum bandwidth for both the TC network and the AirPort network.
Question - does the Airport Express have to be directly connected to the TC or can that connected be through a switched network?
I'm assuming that you are asking about an Ethernet switch here, correct? The AirPort Express or AirPort Extreme can connect to the Ethernet switch, or directly back to a LAN port on the Time Capsule, whichever is easier to setup.
Question 2 - assuming I can connect the Airport Express to the TC over a switched network, will "extending" the network using the Ethernet network still reduce my overall wireless bandwidth?
Connecting the remote device using Ethernet is by far the best way to extend a wireless network because it maintains maximum bandwidth on the network. This is the way that any good commercial network is designed.
Post back if you need any tips to get things setup.

Printing through the network

I have heard the I can print through my wireless network. Just where do I have to go and what do I have to do to get that going ? I want to be able to print to a printer upstairs from a pc downstairs. The pecee recieves a signal from my wreless router by my macpro.
thanks

This whole thing began when I asked the tech at school if he had ever used a bluetooth printer. He reponded by saying, "Why would I ? I can just print through the network," I had been thinking of getting a bluetooth printer so my partner could print from downstairs, The printer upstairs prints through the usb cable from the mac pro. No ethernet connection no blutooth on this printer. So this is what leads me to the question.
So it's the printer sharing I need to look at in system preferences ! Thanks. It's got to be possible to go cross platform. I print from both pc and mac to a printer in the room next to mine at school. I've never done anything but add printer from an available printer list which is identifiedby room number or entering the ip address for the printer. I've not needed to do anything about sharing printer in settings. Would this mean the mac pro which it's connected to needs to be on to print from the pcee downstairs or just that the network be active ?
Thanks

HT4356 My iPad does not see my printer on the network. The printer says it is connected and I can ping it from my pc, but the iPad does not seem to be able to find it. I am going though an AOL supplied router, I have read this can cause issues, is this

I am trying to print from my iPad to a HP 3520 printer using AirPrint. I have connected the printer to my local wireless network and it confirms it is connected. However my iPad can not find the printer on the network when it searches for it. I am using an AOL supplied router and have read reports that this can cause problems. Is this the case? How do I resolve this issue?

Hi,
That indeed can be caused by a router as Apple's AirPrint uses Bonjour to communicate with the device.
Bonjour Services relies on IP Multicasting which have to be supported by your network.
To isolate the problem, please follow the steps below to enable Wireless Direct and directly connect the iPad to your printer (which means without using the router).
Once the iPad connected to the Wireless Direct network try printing and check for any difference.
If the printer can be found via the temporary connection but not through your router that indicates lack of Multicast support or wrong configuration of your router.
In such a case be sure to contact AOL and check if the router support Multicasting, if so ensure it is enabled within your router configuration, as well ensure it have the latest firmware installed..
Shlomi

How to Connect My Printer to The Network

My printer is LaserJet M1212nf. According to the brief introduction I should connect the printer to the network first in order to enable its e-printing function. I'm working at home. I don't share information with other computers. Does "network" mean my home internet? Do I need to use either a cable or a USB to connect it to the home internet? Or is there another way? Once it is connected, how can I get an email address from HP for my printer?

Hi,
Your printer can be connected to your network to print but it's not an ePrint printer:
http://www.shopping.hp.com/shopping/pdf/ce841a.pdf
It has a LAN card, you can connect it to your network and print wirelessly (note: print wirelessly and ePrint are two different things).
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02272928
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Tracking Bonjour Printer on the Network

I am trying to track down a computer that is sharing a printer on my network via Bonjour. I first thought that it was one of my OS X servers publishing it. I am redoing some labs during the summer and figured it wouldn't hurt to clear the queues, so I reset the printing system on all of them. That did not change anything. The printer itself does not support Bonjour/mdns, so it is not causing the problem. Just to be safe, I turned off the printer. The old printer share is still showing up in Bonjour. Is there any way to figure out who is sharing this printer short of turning off every printer to see which one goes away?

You mention turning off a printer but then you also mention trying to figure which printer is broadcasting. So if it is a printer that you want to locate then you can open Safari and select the Bookmarks icon. Then in the sidebar you can select the Bonjour entry which will show all Bonjour devices this Mac can see. In theory the printer that you are looking for will be shown here and selecting it will connect to its internal web page, probably giving you more clues as to what it is and where it is located.
If it is another Mac that is sharing the printer then I don't think the Safari action will help. But if you did select to add this shared printer and then open System Profiler and select the Printers entry in the sidebar, this printer will be listed and selecting it will give more information about the Mac that is sharing it.

On my MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks.

On my new MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks. This also happens on a website editor. But, when I am connected to the internet via Wifi, everything load properly. This is my work computer, so I have to be able to connect through the Ethernet cable to access everything. Please help me!

I mostly use Safari. But I also tried it on Firefox, Mozilla, and Camino. Mac OS X. It's my work computer, so I've only tried it at the office. I have to be connected through the Ethernet cable to access my files and email on the server.

Airport won't print over the network

I have a basic HP Photosmart C4200 series printer. It works fine when I plug it directly into my computer but when I plug it into the router, it won't print and this message comes up : "Unable to read response header - short read"
When I delete/add the printer from Preferences, it finds the printer and establishes connection but when I try to print over the network, it gives me that error message.
A weird thing I found was that when connected to the airport, my printer shows up under the iDisks tab under the Airport Utilities instead of being in the Printers tab...

Welcome to the discussions!
A number of entry level printers are designed so that they will only work when they are connected directly to a computer, so that may possibly explain your problem.
To verify, you can work your way through Apple's troubleshooting guide to see if this is the case. If you've completed all the steps and still can't print, I think you have your answer.
http://support.apple.com/kb/TS1253
http://support.apple.com/kb/TS1253

Remote Downlevel Document - printing over the network

I have a PSC (Printer Scanner Copier) HP F380 connected to a windows pc in my network.
I'm trying to print trough the network over Airport.
I can add the printer (it's found under the WINDOWS TAB when I'm adding the printer) and I sucessufuly login using the windows usr/pass ... (I have the correct permissions set in the printer).
The thing is all the documents I sent from my mac (Leopard) are showing up in windows as REMOTE DOWNLEVEL DOCUMENT, and tough they have the right size (it's not 0kb), they never print.
I tried desabling bidirectional support as I read on the web, but it was no help.
Any ideas ? Thanks in advance,
Felipe, Brazil.

When it finds the drive automatically what driver name is displayed? That's the one you look for. If the PC printer is properly shared, then you should see a list of shared printers. Select the shared printer and the driver should be found. If it isn't, then select the one that was used when the printer was directly connected to your Mac.
If that doesn't help then see: iFelix's Technical Pages for XP and the Mac.

HT2250 I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour. Is that correct?

I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour. Is that correct?
paul.kelly

Hi Steve,
No expert, but since nobody else has piped in...
Did you setup the DNS Server IP?

Access Denied error when trying to print over the network

I just upgraded my Internet service and leased a new modem. My laptop is connected to the network and is able to browse the Internet. I have file and printer shared tuned on on both the desktop and the laptop. The printer is listed on my laptop, but I cannot print over the network to my HP PSC 1401 All In One. I get an Access Denied error even though the printer should still be connected to the network.

bump

Printing to the network via USB Ethernet

Similar Messages

Maybe you are looking for