Printing to Video deteriorates and finally stops working

I've been experiencing problems with Print to Video & Edit to Tape over the past two weeks and now it has stopped working altogether. The Deck is a Panasonic DVCPro AJ-D455p. Log & Capture works fine. Edit to Tape was the first thing that stopped working. then Print to Video would send the audio but no video, then it wouldn't work at all so we were playing content directly from the timeline and recording manually. Now we can't even do this. I'm trying to identify if this is a hardware or software issue. (the deck plays fine to the monitor) Any ideas? (At first powering down the deck, restarting FCP seemed to help. no longer.) I've also checked and rechecked the A/V settings for output, refreshed the deck through FCP etc...nothing helps on the settings side of things.
PowerPC G4   Mac OS X (10.4.2)   FCP studio 5.0

A strange and bizzare series of events has left me baffled re: FCP. About a month ago communication with the Panasonic AJ-D455 began to deteriorate. I was not able to edit to tape, then could not print to vid, so was posting to tape playing off the timeline. Log and Capture worked fine. My external monitor would not mirror the desktop no matter what my AV settings were. Then Log & Capture stopped working. I've run FCP rescue, I've trashed preferences, I've checked the FireWire, I've checked the deck. I've reformated the entire computer, reinstalled FCP...still no luck.
Other random facts. After I trashed the preferences, the system worked normally for about 30 minutes. After I reinstalled FCP the system worked fine for 1/2 day.
Any suggestions on what to do, look for, next?
Also, the deck works flawlessly with another machine. The FW cable is also fine.
Not sure what to isolate next...

Similar Messages

  • Laser Jet M1217nfwMF​P wireless and fax stopped working printer works with usb cord

    I have an HP computer 64 bit version.  The printer suddenly stopped working wireless, fax stopped working weeks ago.  Printer does work with a usb cord.  Turning it off (removing elec cord) on both computer and printer, didn't help.  Nothing changed that was different to cause either problem.

    Hi agueda
    I see that your Laserjet M1217 wireless and fax stopped working but the usb connection does work.
    I would restore the printers defaults to setup the wireless again.
    Touch the setup (wrench button) on the printer, select network config, select restore defaults.
    Then make sure the wireless radio is turned on.
    Touch the setup button (wrench), network configuration, wireless menu, wireless radio-on.
    Temporarily connect the usb cable from the printer to the computer and go to start, all programs, hp, laserjet m1217 and select wireless configuration and go through the wizard to reset up the wireless again.
    or if your router has a wps button on it then you touch the wps wireless button on the printer and immediately touch the wps button on the router.
    Printer should automatically connect to the wireless network.
    Run the add printer wizard.
    Go to control panel,(win7) devices and printers then click add a printer, next, select network
    highlight printer, next, message installing printer.
    Should be able to print over  wireless again.
    Check  fax connections.
    Then run a fax test.
    Touch the setup (wrench button) on the printer, service, run fax test.
    You should have 4 passes.
    Change these fax settings on the printer.
    private receive-wrench/fax setup menu/ok/fax receive setup/ok/private receive/ok/set it to off
    error correction-wrench/arrow to fax setup/ok/all faxes/error correction/ok/set it to off/ok
    speed-wrench/arrow to fax setup/ok/all faxes/ok/fax speed/ok//change speed to medium.
    clear saved faxes-wrench/fax functions menu/clear saved faxes/ok/ok to clear.
    Try sending and receiving a fax.
    If you have any further issues please let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I have an old iPhone 4 that finally stopped working.  I have an unlimited data plan and want to keep it.  When I called customer service, I was told like in the past that if you purchase the new phone at full price, you can keep your old plan.  However, a

    I have an old iPhone 4 that finally stopped working.  I have an unlimited data plan and want to keep it.  When I called customer service, I was told like in the past that if you purchase the new phone at full price, you can keep your old plan.  However, after some time on the phone i was told by the csr and supervisor that their system is not allowing them to complete the transaction without changing to a limited data plan.  I was told to try going to a store and buy the phone.  Same thing happened.  Has Verizon changed something and not told their employees?

    Seems like people having this problem are those coming from a phone that doesn't have a nano SIM card...so when Verizon issues them one they end up changing their plan. No clue why this keeps happening but stay on top of them. As long as you initiated the request for your plan to be reinstated within the 14 day time frame they should put it back. Interested in seeing how this plays out. There is still one phone in my house that hasn't been upgraded (an iPhone 4). I'm hoping when we do upgrade it at full retail they won't mess with her unlimited data plan

  • Hi, I use facetime regularly with my parents who live outside US and it stopped working. Their ipad2 rings,says connecting..and then 'call failed'. Upgrading their iOS5 (or 6) is not a option as my parents do not know to do this. Please help

    Hi, I use facetime regularly with my parents who live outside US and it stopped working. Their ipad2 rings,says connecting..and then 'call failed'. Upgrading their iOS5 (or 6) is not a option as my parents do not know to do this. I came across forums where this issue is mentioned on apple support and cnet.
    Is there another option apart from upgrading ?

    Well, in his defense, his parents bought him the player so I guess we can't blame him. Though the 6 GB versions were available in November so I guess they really did get 'nervous' about Christmas and like to get their shopping done early! Kudo's to you for trying to remain with the Creative line but for what you're looking for it's obviously not the player for you. Creative seems to be fine-tuning their line for the audio crowd. I'm into mp3 players for the audio. Sure, the ability to watch video's and look at pictures on a decent screen is a plus but for me at least, it's all about the music. And with music, 6 GB is more than enough. Heck, 8 GB would have been more than enough for me. I'm a subscriber to Napster-to-go, so I don't feel the need to carry 00 plus GB of stuff on my portable player. I honestly don't understand the desire to watch movies or TV shows on tiny little screens. But you're also talking to a guy who doesn't watch television. What a complete waste of time and brain cells. Probably the **competitor products we can't discuss here** or one of those players would better suit your needs. Companies are definately picking their niche markets carefully and Creative's decision to not offer hard dri've players any more seems to definately be saying bye-bye to that market. I can't say I blame them. Hard dri'ves eventually give up the ghost and are quite delicate for people on the go. Good ridance, I say. Let Apple, Zune and all the others cater to the Z generation's need to be spoonfed their video/TV addictions anywhere and everywhere. I'll pass. It's one thing to be able to enjoy some music on the go and enhance an otherwise dull work day or dri've. But movies/TV shows at work, school, or wherever? Please. Cut the cord! Just my $.02 - YMMV! M.Message Edited by Dale-CL on 2-26-2007 :4 AM

  • Safari, Firefox, Itunes and Update stop working, internet connection is properly working

    I have a 15 month old MacBook with OS X 10.6.7.
    Since two days, Safari and Firefox stop working after browsing through a few (randomly chosen) pages. That is: initially, things seem to work ok (a bit slower maybe), but after a while the page loading progress bar (in blue) gets stuck, and so does the browser. By then Itunes and Software Update don't work either. I get the error message: You are not connected to the internet.
    Sometimes, the programs start working again after a while
    When going to system preferences / network / Assist me / diagnostics, I get the report that the internet connection is working properly (it is, because I can type this on my other laptop).
    Using a tip from the Appel support community, I also tried Assist me / assistant, and set up the network again. Same problems arise.
    I have tried a few more things:
    - Clean up the system from additional programs
    - Backed up files and removed them to create extra space
    Although I do not know if it is related to teh above problem, we did experience a slower startup of the MacBook in the past few weeks.
    Is there anybody who can help us with this?
    Thanks in advance for any suggestions/explanations.

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

  • Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

    Hi Team,
    Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
    and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
    Regards
    Sahil bhateja

    Hi，
    So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
    Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
    Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers. 
    if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
    Yolanda Zhu
    TechNet Community Support

  • Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

    I have a Mid 2011 Macbook Air.
    Upgraded to Yosemite last week.
    Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
    I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
    After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
    If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
    I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
    I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
    I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
    I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
    I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
    Thanks,
    John

    Hi!
    I have exactly the same problem, and I can't find any solution.
    I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
    I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
    Any suggestion is greatly appreciated!

  • Maxbook air keyboard, trackpad and usb stop working

    Hi everyone! i have a macbook air (early 2008) and it stop working the keyboard, the trackpad, and the usb port i think the bluetooth too becouse when i checked the hardware it doesn't appear i think is something wrong with the software becouse the ilumination of the keyboard still works but i can't use the restore disks becouse i don't have keyboard so i can't choose the start disk, any ideas what can it be? someone experience the same problem? Thanks

    It's a common problem. I'm not aware of a fix yet.

  • Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

    Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

    ejwoodall wrote:
    It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
    Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
    I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
    The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
    If your machine performs flawlessly, it may be a router issue.
    If your machine has connectivity issues there, it may be a hardware problem with your machine.
    There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
    But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
    In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

  • X1 Carbon touchpad and trackpad stops working.

    Received my new X1 Carbon 2014 this week. After only two minutes of use, the trackpad and toucphpad stopped working.
    I hade to use an external mouse, and even after all driver updates it still didn`t work.
    If I restart the machine, sometimes the track-touchpad will work, but suddenly it freezes up again (after only minutes of use), and I will have to restart to fix the problem. Have used it for 5 hrs now, and how probably restarted about 30-40 times.
    Anyone know what is causing this problem and/or how I can fix it?
    //alex

    Same issue here.
    Bought my X1 carbon 20A7 last month.
    The touchpad and trackpoint stop working after a while. Sometimes after minutes of use, sometimes after half an hour. When I close the lid, to let it go to sleep, and wake it up again they both work again. Another interesting (might be a coincedance) issue is that when I wake the laptop up after this has ocurred, the fingerprint reader does not work to log back on. 
    I have done a fresh install of windows 8.1 and updated all windows and Lenovo drivers. 
    I hope this gets solved quickly. It's kind of ridiculous for such a premium laptop.
    Lenovo?

  • Email and Chat STOP working

    Email and Chat STOP working. NOKIA - try OVI services.
    Nokia with Microsoft and Windows Mobile 7 - so; forget and don't hope about quality of our Symbian system and Ovi service
    http://www.nokia.com/press/press-releases/showpressrelease?newsid=1488004
    http://www.microsoft.com/presspass/press/2011/feb11/02-11partnership.mspx

    Hi Abdelhediamir,
    Is the mobile data connection (with your provider) up and running? Are you able to browse the web using the phone's browser? If no, this is most likely the reason why the issue is happening. Kindly coordinate with your Network Provider to get the correct Internet/APN settings via SMS. Save it on the phone so it will be configured.

  • Windows 8.1 Onboard Keyboard and Touchpad Stopped Working.

    After upgrading to Win 8.1 my keyboard and touchpad stopped working suddenly.  They both worked fine for the entire Windows 8.0 release.  When I upgraded to 8.1, they both worked for about 3 months.  Then what started happening is the computer
    would freeze during the startup process.  
    Now they both don't don't work.  But a USB powered mouse works.  So with a USB powered mouse and the on screen keyboard I have been troubleshooting.  I have removed the drivers from the device manager, reinstalled the drivers, searched for
    driver updates etc.  Nothing works. 
    Can someone please point me in the right direction.  PC is kind of useless at the moment.

    Hi,
    Kindly check this application that can show incompatible/unwanted/untrusted/ applications then remove these with different kinds of PC cleaner/Application removal tools.
    http://www.getsysteminfo.com/
    After Downloaded, Run the Application and Save Report, Upload the Report and Press Submit Button and Click Read the report as an Expert.
    If you found anything in these 2 Auto analyses
    then find the solution.
    1) Driver To Update:
    2) Application to Update:
    Good Luck!

  • A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer.help please

    A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help

    Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
    For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous.

  • I used this iphone wire for a bit, it worked perfectly but then suddenly i couldnt charge my phone and it stopped working completely. ive tried many other wires but they dont seem to work as well. im starting to get really frustrated

    i used this iphone wire for a bit, it worked perfectly but then suddenly i couldnt charge my iphone 5  and it stopped working completely. ive tried many other wires but they dont seem to work as well. im starting to get really frustrated and im really unsure of whats the case. i really really need help with this. please help asap!!

    Presuming you are using a wall charger - it would seem that your battery needs to be looked at in an Apple store

  • I have Photoshop CS2 for the MAC and it stopped working on my MAC. I recently bought a new MAC, an iMAC. There appears to be no way to contact Adobe about this.  What do I do? Ed

    I have Photoshop CS2 for the MAC and it stopped working on my MAC. I recently bought a new MAC, an IMAC and it doesn't work on that either. There appears to be no way to contact Adobe. What do I do? Thanks, Ed

    That because the activation servers were retired. Now for the good news:
    Adobe has provided a non-activation version of Photoshop CS2 free of charge for their CS2 license holders.
    Download the Mac version of Photoshop (not the suite) and copy down the serial number next to it.  Do not use your original serial number or cs2 disc.
    Download Acrobat 7 and CS2 products
    Uh... one more thing CS2 is PPC only.  OSX 10.6.8 has Rosetta to run legacy PPC products. 10.7 and above will not.
    Good luck,
    Gene

Maybe you are looking for