Printing transfer order ( tx LT31 ) with smartforms ?

Hi all,
Is it possible to assing a smartform for printing transfer orders? I didn't find any informations about that in this forum...
Thank you in advance !
Olivier.

No. The Transfer Order configuration can only accept the SAPScripts.
But however there is a work around.
Create a Smartform.
You can create own your program to select the data for the transfer order and use the smartform in it.
In the Configuration, you can assign this program and a DUMMY SAPScript name (you may leave the standard SAPScript name).
Regards,
Naimesh Patel

Similar Messages

To print transfer order and storage unit labels in lt31

Hi SAP Gurus
1>Is it possible to print Transfer order and Labels simultaneously in tcode LT31(At a time when LT31 is executed
If yes please guide me the selection parameter in Tcode LT31 and if any configuration required in the background
2>Is it possible to print Transfer order and storage unit labels automatically when MIGO is posted.what are the settings required
My client raised a query that before he was able to print both once Migo is posted .But now only trnasfer orders is getting printed but not SU.
Requesting to help in this issues
Thanks in advance
Regards
chandu

you need to define the print control parameter in the customizing and whether you can print both(SU & TO) is depend on the print code which you specify in the setting under
LE----WM---Activities-----Define print control
After MIGO are you transferring the stock to SU managed storage type , as per STANDARD SAP stock goes to 902 which is Non SU managed so here you need to tell us the flow and the storage type where stock goes after MIGO also is that storage type is SU managed or not

BAPI Print transfer order (LT31)

Hi,
Is there any BAPI exist for Transaction LT31 Print Transfer Order?
If anybody hv the code for finding BAPI for particular transaction?
Thanks
Sandeep

Hi Sandeep,
check FM
WS_LM_TRANSFER_ORDER_DISPLAY
<removed_by_moderator>
Regards,
Hemant
Edited by: Julius Bussche on Aug 29, 2008 8:21 PM

Printing Transfer Orders based on Manifest Number (Shipment Number)

Hi All,
We are on R/3 4.6c with Lean Warehouse Management.
We have a requirement to be able to print Transfer Orders which are linked to a given Manifest - wondering if SAP has a standard way of doing this?
Sales Order 01 -> Delivery01 -> Transfer Order_01 \
Sales Order 02 -> Delivery02 -> Transfer Order_02 ]----->>> Manifest_01
Sales Order 03 -> Delivery03 -> Transfer Order_03 /
We would to be able to say for 'Manifest_01' print all related Transfer Orders
All help greatly appreciated.
Thanks,
Ravelle

A solution has not been identified...query closed.

To print transfer order by range

Hi,
I had 20 transfer order created and I would like to kick off the printing by selection on screen from TO#1 to TO#20.
Is it possible to do so in LT31?
There is a program, RLVSDR40 but it does not have any TCODE linked to it.
Is there a standard TCODE to do so?
Thanks

Use LX21 there you have dynamic selection option.Select the option transfer order here you can give the range.
To print a group of transfer orders by a single group number or for a range of group numbers:
In the SAP menu, choose the path Logistics ® Logistics Execution ® Outbound Process ® Goods Issue for Outbound Delivery ® Communication / Printing ® Reprint Picklist

PRINT Transfer Order

Hello Gurus
I have this issue, where i have a Transfer Order, when i select Print, it is printing 3 copies of the TO's. i need to change the config so that when i print TO's , it shud print 2 copies only instead of 3 copies.
Could you please help me with this issue.
Thanks in Advance
Nidhi

Hello Nidhi,
Check the settings in OMLV transaction code and change the quantity field in that.
Hope this helps.
Regards
Arif Mansuri

Print Transfer Order Immediately

Hi,
We are creating a transfer order immediately in background with the posting of every material document.
Along with TO , we would also like to print TO immediately based on movement type.
Could anybody please help with the configuration for immediate TO print.
Regards
Karan

Hi Karan,
In setting Logistic Execution> WM>Interface>Inventory mgt>Define mvt type, Set link for IM movement type to WM referance movement type. Next setting .."LE-WM interface to IM", here set link among Warehouse no. referance movement type to WM movement type, here set indicator for create TO immediatly to "A" . Prerequisites for this is WM movement types are configured.
To have TO print, OMLV configuration needs to be done. Assign print code to movement type. Assign forms ( standered or customised) to print code, assign correct spool code here. Assign printer to warehouse movement.
Hope this will help.
Regards,
Sudhir

Printing Transfer order

Friends,
Can you let me know....how do i print a TRANSFER ORDER FOR A GR SLIP.
Regards,
Sanjay

Hi
Please refer to the link below this should give you a good starting point to understand
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Please let me know if you hev any specific question
Thanks

Storage Type change in the transfer order after creation with MDE

Hello ,
With the MDE transaction ZMDETSP the transfer between storage locations is done and the transfer order created in the background.
I would like to know if in standard SAP the modification of the storage type is possible after the TO is created therefore also in MDE.
I changed the bin with LT1D but impossible for the storage type.
I know, user exits BUT there must be other solutions, no ?!!
Thanks in advance for your answer(s),
Patricia

You have to do the configuration to change the storage type in TO.
IMG>LE>WM>Strategies>Activate storage type search , Here you have to give both the storage type.
Also you need to change the storage type at the time of TO creation not duirn confirmation

Creating Transfer Order for Delivery with Specified Source Bin

Hello,
My requirement is to create a pick transfer order for an outbound delivery.
L_TO_CREATE_DN works perfectly well, however, it does not let me to specify the source (fixed) bin in my warehouse. It actually executes the bin determination routine to pick the source bin for me, which is not acceptable.
L_TO_CREATE_SINGLE won't work as my destination bin is a dynamic bin, and this FM does not allow to set LTAP-NKDYN.
So, I'm stuck. LT03 actually allows the user to input source bin information, so I'm saving BDC as my last option, but wanted to see if anyone here has other ideas.
Thanks in advance!
R.D.

Hi,
Try this L_TO_CREATE_SINGLE
Tks,
Krishna

Creating transfer order for delivery with ABAP

Hi Experts,
I'm using L_TO_CREATE_DN to create a transfer order for delivery note...
Is it possible to use this function or another one, to create a transfer order for one position of the delivery note ?
Regards,
David

Hi,
Try this L_TO_CREATE_SINGLE
Tks,
Krishna

Auto printing transfer order issue

hi,
TO is automatically generated upon the MIGO GR MvT 101 based on the material doc#, TO supposes to print automatically at this point, but it just not happening! i have to manually print out through SP02, TO is in spool. the status is 'error" doesn't specify whats wrong with that though!
in another case, TO created by outbound delivery Mvt 601 printed automatically without probs! checked all setting haven't found anything wrong, any clues! thanks!
Edited by: qgjddcel on Dec 18, 2008 4:11 PM

What is the proper procedure/transactions for this? Is there any other way to solve this? This STO is about 5 months old, would that cause any issue?
thanks in advance.

Transfer Order in WM with 103 Movement type In IM

Please sugget me ,whether it can be possible to Create TO for movment type 103 .? Please suggest me the steps.

Dear Karthik,
Here i a following the standard flow
1.MIGO with 101 in Storage location.
2.TO generation .
3.TO confirmation in desired BIN.
But after 1st step the stock is present in storage location ,then from there only it will be available for sales in System , but i want to make it available after Putaway beacuse of WM.
Also i dont want the imidiate confirmation of TO .I want it seperately to do.
Please suggest me.
Edited by: harshad81 on Aug 10, 2011 12:46 PM

Transfer order printing.

Hi,
To print the Picklist and labels we are using the sap standard Tcode LT31. Here we can print a single document. Is there any other hwere i can print multiple transfer orders or a series of transfer orders at a time

Hi Sunil,
The system determines how to print combined pick lists based on a table entry in customizing. For this task, the system branches to the report RLKOMM40 "Print Combined Pick List". You can also enter a printing status in a table that instructs the system to print individual transfer orders (TOs). In this case, the system prints transfer orders normally.
With report RLKOMM40, you can print both combined pick lists and individual items. The advantage of printing single items with RLKOMM40 instead of RLVSDR40 lies in the capability to sort transfer order items for release as a group at a particular time.
For details check : http://help.sap.com/saphelp_45B/helpdata/en/c6/f83e334afa11d182b90000e829fbfe/content.htm
For Printing Process : http://help.sap.com/saphelp_45B/helpdata/en/c6/f83e404afa11d182b90000e829fbfe/content.htm
Edited by: m_n_novice on Aug 31, 2009 12:28 PM

Transfer order print LT31

Dear all,
How to configure form and Driver program for Transfer order LT31.
I want to create it through smartform.
Please let me know configuration way and design with smartform possiblities.
Regards
Mohit

Hi,
LT 31 is a standard tcode for transfer order. Standard program for printing transfer order is RLVSDR40 which internally calls sap scripts.
However you can design your customised code which is a copy of RLVSDR40 program but in your customised program, you have change logic of calling sapscript and replace it with smartform logic.
Like you have to commnt OPEN FORM,WRITE FORM, CLOSE FORM function modules and call below code :-
Get the name of the function module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 formname = lw_form
 IMPORTING
 fm_name = lw_name
 EXCEPTIONS
 no_form = 1
 no_function_module = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 MESSAGE a003(zqsvmessage) WITH fs_irldrc-formu.
ENDIF. " IF sy-subrc <> 0
here you have to pass form name(SMARTFORM name)
However we can make changes in configration by using Tcode OMLV here you have to specify:-
warehouse number,
print code number,(putaway, picking,kanban etc)
form name(here you can assign SMARTFORM name)
Hope this works for you.
Thanks..............

Printing transfer order ( tx LT31 ) with smartforms ?

Similar Messages

Maybe you are looking for