Printing Transfer Orders based on Manifest Number (Shipment Number)

Hi All,
We are on R/3 4.6c with Lean Warehouse Management.
We have a requirement to be able to print Transfer Orders which are linked to a given Manifest - wondering if SAP has a standard way of doing this? 
Sales Order 01 -> Delivery01 -> Transfer Order_01 \
Sales Order 02 -> Delivery02 -> Transfer Order_02  ]----->>> Manifest_01
Sales Order 03 -> Delivery03 -> Transfer Order_03 /
We would to be able to say for 'Manifest_01' print all related Transfer Orders
All help greatly appreciated.
Thanks,
Ravelle

A solution has not been identified...query closed.

Similar Messages

  • Dangerous Goods checks in transfer order (based on purchase order)

    Dear,
    We have defined a process to transfer products from one plant of our company to another plant of our company based on a purchase order (Transfer order), a delivery and a shipment.
    Problem: the delivery and shipment could be checked in a Dangerous Goods standpoint but nothing seems to be available in standard to check the process at the first step : at purchase order step.
    My question is : do you know if a standard feature exist on purchase order to ensure a "non frustating process" as soon as possible ?
    Many thanks for your help
    Best regards, Jérôme

    Dear Jerome
    DG Set up is only related to SAP SD process (e.g. check SAP EHS online help), Therefore DG checks are not available in the purchase part. And your scenario it quite standard; Normally the DG check part starts in Sales process, then in delivery and then in shipment. If you use SAP TM again you can use DG checks there.
    C.B.
    PS: e.g. SAP GTS and SAP EHS SVT are integrated in purchase process by standard. But is is not a good idea to "misuse" these modules for DG perspectives in MM process.
    PPS. may be check: Blocking Hazardous Materials for Purchasing with HSM,
    System-Internal Stock Transfer Using Stock Transport Orders - Integration of Transaction Data - SAP Library

  • Creating transfer orders based on transfer requirements

    Hi,
    I have a requirement to create a transfer order based on a transfer requirement and also in that transfer order I need to specify the SSCC pallet number as Storage Unit Number.
    I have searched the SCN and found that I should use FM L_TO_CREATE_TR. I also see that I should fill import structure it_trite with storage bin related data.
    I am on a 46C system and I do not have the it_trite structure. I have seen comments that it exists in 45B and I also see it in ECC6 systems.
    I cannot find any related notes on OSS.
    Can someone confirm that 46C should not have this import structure? How am I supposed to specify storage unit number if that import structure is not there? Are there alternative FM's I can use?
    best regards,
    Glenn

    A solution has not been identified...query closed.

  • To print transfer order and storage unit labels in lt31

    Hi SAP Gurus
    1>Is it possible to print Transfer order and Labels simultaneously in tcode LT31(At a time when LT31 is executed
    If yes please guide me the selection parameter in Tcode LT31 and if any configuration required in the background
    2>Is it possible to print Transfer order and storage unit labels automatically when MIGO is posted.what are the settings required
    My client raised a query that before he was able to print both once Migo is posted .But now only trnasfer orders is getting printed but not SU.
    Requesting to help in this issues
    Thanks in advance
    Regards
    chandu

    you need to define the print control parameter in the customizing and whether you can print both(SU & TO) is depend on the print code which you specify in the setting under
    LE----WM---Activities-----Define print control
    After MIGO are you transferring the stock to SU managed storage type , as per STANDARD SAP stock goes to 902 which is Non SU managed so here you need to tell us the flow and the storage type where stock goes after MIGO also is that storage type is SU managed or not

  • Printing transfer order ( tx LT31 ) with smartforms ?

    Hi all,
    Is it possible to assing a smartform for printing transfer orders? I didn't find any informations about that in this forum...
    Thank you in advance !
    Olivier.

    No. The Transfer Order configuration can only accept the SAPScripts.
    But however there is a work around.
    Create a Smartform.
    You can create own your program to select the data for the transfer order and use the smartform in it.
    In the Configuration, you can assign this program and a DUMMY SAPScript name (you may leave the standard SAPScript name).
    Regards,
    Naimesh Patel

  • BAPI  Print transfer order (LT31)

    Hi,
    Is there any BAPI exist for Transaction LT31 Print Transfer Order?
    If anybody hv the code for finding BAPI for particular transaction?
    Thanks
    Sandeep

    Hi Sandeep,
                      check FM 
         <b>WS_LM_TRANSFER_ORDER_DISPLAY</b>
    <removed_by_moderator>
    Regards,
    Hemant
    Edited by: Julius Bussche on Aug 29, 2008 8:21 PM

  • To print transfer order by range

    Hi,
    I had 20 transfer order created and I would like to kick off the printing by selection on screen from TO#1 to TO#20.
    Is it possible to do so in LT31?
    There is a program, RLVSDR40 but it does not have any TCODE linked to it.
    Is there a standard TCODE to do so?
    Thanks

    Use LX21 there you have dynamic selection option.Select the option transfer order here you can give the range.
    To print a group of transfer orders by a single group number or for a range of group numbers:
    In the SAP menu, choose the path Logistics ® Logistics Execution ® Outbound Process ® Goods Issue for Outbound Delivery ® Communication / Printing ® Reprint Picklist

  • Print Transfer Order Immediately

    Hi,
    We are creating a transfer order immediately in background with the posting of every material document.
    Along with TO , we would also like to print TO immediately based on movement type.
    Could anybody please help with the configuration for immediate TO print.
    Regards
    Karan

    Hi Karan,
    In setting Logistic Execution> WM>Interface>Inventory mgt>Define mvt type, Set link for IM movement type to WM referance movement type. Next setting .."LE-WM interface to IM", here set link among Warehouse no. referance movement type to WM movement type, here set indicator for create TO immediatly to "A" . Prerequisites for this is WM movement types are configured.
    To have TO print, OMLV configuration needs to be done. Assign print code to movement type. Assign forms ( standered or customised) to print code, assign correct spool code here. Assign printer to warehouse movement.
    Hope this will help.
    Regards,
    Sudhir

  • Printing Transfer order

    Friends,
    Can you let me know....how do i print a TRANSFER ORDER FOR A GR SLIP.
    Regards,
    Sanjay

    Hi
    Please refer to the link below this should give you a good starting point to understand
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
    Please let me know if you hev any specific question
    Thanks

  • PRINT Transfer Order

    Hello Gurus
    I have this issue, where i have a Transfer Order, when i select Print, it is printing 3 copies of the TO's. i need to change the config so that when i print TO's , it shud print 2 copies only instead of 3 copies.
    Could you please help me with this issue.
    Thanks in Advance
    Nidhi

    Hello Nidhi,
    Check the settings in OMLV transaction code and change the quantity field in that.
    Hope this helps.
    Regards
    Arif Mansuri

  • Auto printing transfer order issue

    hi,
    TO is automatically generated upon the MIGO GR MvT 101 based on the material doc#, TO supposes to print automatically at this point, but it just not happening! i have to manually print out through SP02, TO is in spool. the status is 'error" doesn't specify whats wrong with that though!
    in another case, TO created by outbound delivery Mvt 601 printed automatically without probs! checked all setting haven't found anything wrong, any clues! thanks!
    Edited by: qgjddcel on Dec 18, 2008 4:11 PM

    What is the proper procedure/transactions for this? Is there any other way to solve this? This STO is about 5 months old, would that cause any issue?
    thanks in advance.

  • Transfer order  print LT31

    Dear all,
    How to configure form and Driver program for Transfer order  LT31.
    I want to create it through smartform.
    Please let me know configuration way and design with smartform possiblities.
    Regards
    Mohit

    Hi,
    LT 31 is a standard tcode for transfer order. Standard program for printing transfer order is RLVSDR40 which internally calls sap scripts.
    However you can design your customised code which is a copy of RLVSDR40 program but in your customised program, you have change logic of calling sapscript and replace it with smartform logic.
    Like you have to commnt OPEN FORM,WRITE FORM, CLOSE FORM function modules and call below code :-
    Get the name of the function module
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = lw_form
        IMPORTING
          fm_name            = lw_name
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
        MESSAGE a003(zqsvmessage) WITH fs_irldrc-formu.
      ENDIF.                                " IF sy-subrc <> 0
    here you have to pass form name(SMARTFORM name)
    However we can make changes in configration by using Tcode OMLV here you have to specify:-
    warehouse number,
    print code number,(putaway, picking,kanban etc)
    form name(here you can assign SMARTFORM name)
    Hope this works for you.
    Thanks..............

  • Transfer order printing.

    Hi,
    To print the Picklist and labels we are using the sap standard Tcode LT31. Here we can print a single document. Is there any other hwere i can print multiple transfer orders or a series of transfer orders at a time

    Hi Sunil,
    The system determines how to print combined pick lists based on a table entry in customizing. For this task, the system branches to the report RLKOMM40 "Print Combined Pick List". You can also enter a printing status in a table that instructs the system to print individual transfer orders (TOs). In this case, the system prints transfer orders normally.
    With report RLKOMM40, you can print both combined pick lists and individual items. The advantage of printing single items with RLKOMM40 instead of RLVSDR40 lies in the capability to sort transfer order items for release as a group at a particular time.
    For details check : http://help.sap.com/saphelp_45B/helpdata/en/c6/f83e334afa11d182b90000e829fbfe/content.htm
    For Printing Process : http://help.sap.com/saphelp_45B/helpdata/en/c6/f83e404afa11d182b90000e829fbfe/content.htm
    Edited by: m_n_novice on Aug 31, 2009 12:28 PM

  • Transfer Order Print

    Hi
    Currently transfer Order Print output is sorting by Material Number. I want to take
    print sorting by Source Stroage type.
    How should i change this settings ?
    Thanx
    Key

    Hi Key rams,
    You must define sort profile for your warehouse number, with 1st sort criterion is VLTYP field(Source Storage Type) in OMLV. Then you must assign this sort profile into your print code that you use for print transfer order.
    I hope this solution can answer your problem.
    Please rewards point if helpfull.
    Regards
    Gunawan

  • Transfer Order Printing using smart forms

    Hi All
    Our requirement is to print Transfer Order  ( WM ) for Goods Receipt & Delivery using Smart forms.
    Can we change the existing standard format (SAP script ) and use our own form(smart form ) to include some other data & print.
    If possible how to replace the SAP script to Smart form.
    Request  someone could guide in detail.
    Thanks in advance.
    Samson

    Hi
    When you create Smartform try to replace it in customizing OMLV. Not sure if it will work as it refers to Sap Scirpt in help description.
    It is also possible to write Z program for TO printing and hardcode SmartForm there.
    Regards
    Mariusz

Maybe you are looking for