Printing using dot matrix printer,problem with landscape printing

Hi all,
We are planning to use Dot matrix printers for printing through SAP.We do front end printing using Windows OS. I am able to get prints properly if it is a script form. In case of list outputs, printer is printing the text outside the paper.Only half of the text is printing on the continuous stationary. Actually document is to be printed in Landscape format. So printer should print data vertically on the paper,but it's printing horizontally. I have created sparate output device for this printer.My printer is TVS Electronics HD745 24 Pin heavy duty printer. I have assigned OKI341 as device type for this device.Any more settings I need to do to get printing in landscape mode?

closing thread

Similar Messages

  • Barcode printing using dot matrix printer

    Hi,
    Can anyone let me know what all DOT Matrix printers support barcode printing (PDF 147 type), The barcode is printed in invoice when printout is taken using laser jet but when using dot matrix (Panasonic kx-p3696), the invoice gets printed  without barcode.
    Thanks in advance.
    Sachin

    closing thread

  • Check printing using dot matrix printing?

    HI all,
    I have developed check printing using smartform for laser printer now the my client requirment has changed they are now using a dot matrix printer for check printing, so what parameter should i consider for developing a check printing for dot matrix printing

    the same smartform and driver program will work for all kind of printer.

  • My printer will not print using Mozilla. No problem with other browsers. This is a new problem. Mozilla worked until last week.

    My printer works fine when I print from Microsoft Word or other browsers.

    This is the only official support forum for Firefox.<br>
    You could be scammed on other sites.
    Yesterday, we had a spamming attack on the forums.<br>
    This sort of thing has never happened before, on all of my time with the support forums.<br>
    Sorry if any posts offended you. The moderators are working hard to prevent this sort of thing.
    For the best support results, I suggest that you remain on this forum because it is run my Mozilla.<br>
    Thank you and again sorry for any spamming that you encountered yesterday.
    ----

  • Officejet pro 8600 plus Printer failure - there is a problem with the printer or ink system...

    Arghhh!  Like so many people on the forum I have today encountered this problem - it was working fine until it needed the magenta cartridge replaced.  (I have replaced the other colours successfully over the last couple of weeks).  
    Once I replaced magenta the message came up.  I have tried all the suggestions on the troubleshooting pages with removing the print head a couple of times, trying all the cartridges and cleaning the connections.  I am loathe to go down the road of any cost as the printer is just over 6 months old!
    Given the cost of it I would expect much better for my money.  I did buy extra warranty from Staples, so will be calling them tomorrow, but I can't really wait the 30 days it could take with a daughter in her final year at University and so on - really disappointed and disgruntled.
    I might have to go and buy ink for one of the other two printers I have in the house, but I really liked this and the fact that everyone could connect via wifi.  That has been problematical and I wondered if that was the problem as I can't clean the printheads from the computer software and I can't get any other 'page' on the control panel .
    Anyone got any suggestions, please.

    Is your printer still in warranty - it should be if only six months old? You can check with HP's warranty tool here.
    I would suggest you call HP, 1-800-HPINVENt if you are in North America.  They should be able to either resolve the issue on the phone or send a replacement printer, it should be a lot faster than 30 days.  When I have needed a warranty replacement it was generally a few days.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Right side Text not printing in Dot Matrix Print

    Hi Gurus,
    When i take print of the smartform with Laser Jet Printer its comming fine , but when i print using Dot Matrix Printer the text at right side is not printing.
    Printer model : Epson DFX-5000+
    Can any one tell me how to resolve this..
    Thanks
    Ganesh

    hi ,
      SAPWIN Drivers which support those Epson printers  check in SAP (windows support )
      These will solve your Problem  .
    Regards
    Deepak.

  • Printing in Dot Matrix Printer

    Hi to all,
      As we know that the dos matrix printer supports dos prompt and thus printing speed and 
    life of the printing head is comparatively more than what we print the same in graphical format.
      So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
      Any clarifications on this regard would prove very helpful to me.
    Regards,
    Aditya
    Consultant Business solutions.

    Do you use one of this printer types:
    Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline
    , Epson FX880, Epson FX890 ?
    Here the stepwise I have tried :
    In order to print using Dot Matrix printers, follow the below
    instructions:
       1. Run SAP Business One.
       2. Click the upper menu 'File' and select 'Page Setup'.
       3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
       4. Click OK to confirm your selection.
       5. On your desktop, click Start => Settings => Printers.
       6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
       7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
       8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
    Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
       1. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
    Note that in case the value '120X144' is not available you should select a similar value from the list.
    After you do the stepwise, I am sure there will no problem any more. The slowly printing mostly caused by printer type and your hardware specifications for example your LAN, etc..
    good luck...
    Rgds,
    null

  • Problem in Smartform Table/window Line Using Dot Matrix Printer

    Dear Experts,
    I faced issue in printing smartform using dot matrix printer. In the print result, the table line (horizontal and vertical) is not printed. I already search the forum but none can solve my issue. I already changed the table line width into 30 or 40 TW but still not work. Everything is OK in the print result, except the table line.
    If i manually print/write '__' (underscore), it appear in the print result, but to write horizontal line and vertical line manually in the smartform will be huge effort.
    I used device type EPESCP9 for the output device.
    Can you tell me what i need to do?
    your help will be appreciated.
    Thanks

    Hi,
    Check your device type.
    http://forums.sdn.sap.com/thread.jspa?threadID=2016838
    Jshree

  • Printing form using dot matrix printer

    Dear experts,
    I have a PO form and when printed using laser printer it works just fine, when use dot matrix printer with continuos form , the form's content started to be printed a bit lower compared to the laser printer, should i adjust the paper size in the se71 ?

    Hi Johannes,
    We have been know to go directly into the printer defintion and adjust the Horizontal and Veritical Shift. This can be found on the Output Attributes in the Additional SAPScript and Smart Form Information area. We give our A4 printers a slight Negative Horizontal and Positive Vertical shift to better center the output on the different paper size.
    Regards,
    Raj

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • Use dot matrix printers for printing text reports in Reports 10g

    In Forms 6i, customers had the option to use dot matrix printers for printing text reports.
    I believe, from 9i onwards, text based reports aren’t supported and instead HTML/PDF,DOC,RTF reports are supported which are not text based and use modern day printers.
    Is it still possible to use text printers ??
    Regards,
    Noman

    hi
    check out the following link.
    Re: Is printing to generic text printer and hand-coding the report possible?
    http://download.oracle.com/docs/html/B10314_01/pbr_uxprt.htm#1005700
    sarah

  • Crystal reports printing in dot matrix printer

    I'm using Crystal Reports 2008 with Visual Basic.Net 2008. The problem is that when i print the report in a laser printer, everything is good, but when i used dot matrix printer (like Epson LX 300+), reports is printed smaller than original, doesn't matter if i see good in preview. This is an Asp.Net web form.
    How can i fix this problem

    1) Make sure you have the latest CR Service Pack:
    SP4 https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
    SP4 MSI https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
    SP4 MSM https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
    2) Make sure you have the latest updates for the printer driver
    3) Make sure the printer driver is Unicode compliant
    4) Experiment with the "No Printer" option and Dissociate Formatting Page Size and Printer Paper Size option
    5) Compare print from the CR designer to the app print. Do you see the same issue with both?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Crystal Report printing on dot-matrix printer

    Hello,
    I've developed an application using VB.NET and Crystal Reports in VS2008. The report generated gets printed correctly on modern laser or inkjet printers. However, the entire formatting gets affected when I print these reports on dot matrix printer. Apart from that. the print speed is very slow. I tried exporting the report to PDF, DOC and other formats - but no solution. There was Export to Text function, which is not working in Crystal Reports now.
    After a research on this issue, I found out few links to some solutions - which actually doesn't work. These links are as follows:
    http://social.msdn.microsoft.com/forums/en-US/vscrystalreports/thread/e24a8084-ad53-48bc-a7d5-065ef82636ac
    http://social.msdn.microsoft.com/Forums/en-US/vscrystalreports/thread/dd506c66-4cdc-48a7-9fa8-2c6f14daef24/ (Same issue in C#)
    I've seen some software, in which, when Print on Dot Matrix (custom menu option) is selected, data is sent to DOS mode and reports are printed from DOS mode.
    Is there any solution for this? OR DOS mode is the only solution?
    This is high priority issue. Even though we're moving ahead in IT industry, govt. still depend on 4 color dot matrix printer reports.
    Waiting for solution
    Regards
    Mayur Tendulkar | www.mayurtendulkar.com

    Also, as of Service Pack 3 Microsoft updated their security models so a new C++ runtime is required. Please see these Kbase articles and Forum posts for more info:
    https://bosap-support.wdf.sap.corp/sap/support/notes/0001495319
    Forum thread for info Setup And Deployment Problem
    Info:
    Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update and is available using the link below.
    This needs to be installed before installing a setup package that uses the SP 3 merge modules.
    http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-40ff-b072-9112bab119c2&displaylang=en
    Thank you all again and have a great day
    Don

  • Horizontal Vertical and logo is not printed in dot matrix printer

    Hi All
    i am printing a smartform in dot matrix printer
    the form has horizontal vertical line
    table lines , and logo
    but when i print in Dot matrix printer
    the line and logo is not display
    Please say me how i design for it
    wheather It is printer or smartform design problem?
    Regard
    Riten

    Hi riten,
    The Printer settings is not supporting the horizontal and vertical line ..check with the basis team for the printer settings.
    Regards,
    Sravanthi

  • Printing on Dot Matrix Printer

    Hi
    I am using JPS for printing, but to print on dot matrix printer, conventionally you print character at perticular row & col. Using Java Print Services how can I print a report to Dot Matrix Printer.
    Thanks in Advance

    Anybody knows I am also facing same Problem.
    Thanx

Maybe you are looking for