Printing using raw pass thru mode with PCL 5e

I have an HP LaserJet P3015 printer on our network and have been doing some testing for a company that needs this printer to work.
We have an application that writes using a network connection to pass thru in RAW data mode to the printer device. We use a set of print commands using the PCL 5 control character commands for CR, LF, TOP of Page etc...
With the new printer and drivers, for some reason, we get a blank page printed after each 1 page document we send.
This software has always worked in the past with earlier versions of printers and drivers.
We are using Windows XP.
We are using the LaserJet P3015 PCL 5e drivers
Any help would be appreciated.
PS. We already tried the postscript, universal and PCL6 drivers and they do NOT work.

Hi,
first of: I haven't tried anything of this myself due to lack of a XBox and/or other applicable devices.
But this Apple article http://support.apple.com/kb/HT3924 includes the following paragraph:
+"The Mini DisplayPort in the 27-inch iMac can receive only DisplayPort compliant video and audio signals. Converters not made by Apple may provide options to convert other electrical, video, and audio protocols to Mini DisplayPort compliant signals."+
To me that sounds like what you want to do is indeed possible.
But since Audio-Thru is not an OSX feature you might also have to use the freebie LineIn from RogueAmoeba http://www.rogueamoeba.com/freebies/ to get the audio signal from the MiniDisplay Port-In to the headphone out.
Hope it helps
Stefan

Similar Messages

Is ServerSession Cache invalidated when we use raw SQL thru a UnitOfWork()

Is ServerSession Cache invalidated (for the relevant objects that are mapped to any of the tables used in raw sql) when we use raw update/insert/delete SQL thru executeQuery() on UnitofWork acquired from a clientSession ?
Or we need to do this ourselves by some procedure ?
If there is any documentation about this, could you please refer me towards it.
Thanks,
Krishna

Sorry, don't know how that question was missed.
If you update data with SQL or stored procedures, then it's as if another application has updated the database and you must have a solid locking and refreshing policy in place. TopLink updates the cache after a UOW commit based on how you've manipulated the business model, not any adhoc updating SQL.
- Don

Issue on borderless printing using android HP ePrint app with HP LaserJet Pro 200 color M251nw

Hi,
I am trying to print a pdf document which is of A4 size (11.7 x 8.3 inches without any borders) from android tablet using HP ePrint app along with the printer HP Laserjet Pro 200 color M251nw. When it is printed on A4 sheet, it adds the border on all the sides around 12mm-left, 11mm-right, 8mm-top, 9.5mm-botton margins.
On the printer the firmware datecode shows 20121026, Also the ePrint app which I am using is latest and upto date.
Please let me know how to print the borderless print in A4 sheet.
Regards,
Jaya

Hello revlib,
Welcome to the HP Support Forums!
Turning off the Wireless Direct on the LaserJet Pro 200 color M251nw should have disabled the SSID from broadcasting. Since disabling from the front display did not resolve, let us try from the Embedded Web Server (EWS).
To access the EWS you need to enter the I.P address for the M251nw into the address bar of your web browser. The I.P address can be collected by touching Setup ()> Reports> Network Summary.
Once in the EWS, click Network> Wireless Direct Setup> select Off and Apply.
Let me know if this has help
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Is it possible to use fullscreen and exclusive mode with a jfilechooser?

is there a way to use them together? while in fullscreen exclusive mode the jfilechooser doesn't attach to fullscreen window and it halts the program.. I've tried setting the parent frame as the fullscreen frame but it's all glitched.. am I missing something?
thank you,
best regards,
Jacopo

For reference, the cross-post can be found here:
Is it possible to use network devices (cDAQ-9188) with a PXI Real Time system?
Jayme W.
Applications Engineer
National Instruments

Using "Single Pass" entry point with sequences not named "MainSequence"

Hi,
The object model of TestStand provides clustering of multiple sequences in one sequence file. The editor itself allways knows which sequence the user has actually selected (enrty Run ... in Menu Execute is allways fullfilled with the correct sequence name).
Why isn't there any support of using the entry points of the model with this selected sequence, these sequences use the default "MainSequence" if they are called by the corresponding menu entry of the Execute Menu.
I am looking for any solution to use the entry points (by menu calls) with sequences not named MainSequence as well.
Any ideas?
Regards,
Sunny

Sunny -
In the process model entry point "Single Pass", if you look at the sequence context during an execution, you will notice that the sequence that was visible or "selected" at the time of the execution is started is specified under "RunState.InitialSelection.SelectedSequences[0]". You could alter the MainSequence call step in the process model to call that sequence instead. Keep in mind that you will have to decide how to handle the case when no sequence is selected, do you call MainSequence or do nothing?
Scott Richardson (NI)
Scott Richardson
National Instruments

Using macbookpro in clamshell mode with Ipod touch as mouse/keyboard

I have a 2G ipod Touch and a Macbook Pro laptop (purchased 12/2009). I recently connected my MBP to my Samsung LCD HD TV. I am able to get the picture to work correctly (mirrored the displays). But i was sitting on my couch wondering how to manipulate the screen without using the laptop keyboard/touch pad...Then i found out that the itouch has an APP called Air Mouse PRO and your itouch can be used as a keyboard/touchpad for your computer.
This works great, until i tried to close the lid and put my MBP in "clamshell mode" and the MBP will just go to sleep! there is no way of having the MBP be responsive to the itouch while in clamshell mode.
My question is, " is there a way to wake up the MBP while in clamshell mode?" remember that the connection i have with the itouch is infrared and it is unresponsive while in clamshell mode.

I really don't use Rowmote much any more. I turned my old MBP into a media center and control it with Remote Buddy and an Apple remote. While I can do the same thing with Rowmote, it's easier with Remote Buddy. You can't move the pointer around the screen with it, but it controls media applications amazingly well for using something with only six buttons. http://www.iospirit.com/products/remotebuddy/

Using WAG120N in bridged mode with EA4500

Hello everyone,
Right now, I'm trying to use my WAG120N router as a modem only/Bridged Mode and I've managed to enter all my settings needed on the WAG120N which is the Encapsulation to Bridged Mode Only, QoS to UBR, Type Of Connection to LLC, VPI and VCI to 0 and 35, DSL Modulation to Multimode.
On the EA4500's end I've entered my Usrname and password in the Internet settings and configured for PPPoE.
What am I doing wrong or am I missing something ?

Are you getting an error message on the EA4500 on its status page? If so, what is that error message? Are the settings you set on the modem coming from your ISP? Try to connect your pc directly to your modem with those settings enabled and check if you can get online. You may have to create a dialer or PPPoE connection on that one to work so that you can enter your username and password from your ISP to authenticate the internet connection.
Resolving PPPoE error messages when setting up router

Using Tabs passing a link with parameter

Is possible to use Tabs with parameters? I created a tab and need to pass a parameter when going to the tab link.

No I haven't set one up anywhere , even then since everything happens internally , there is no way to know what really is happening underneath.
Here's the approach.
Say you have to set two page items P100_ITEM and P100_ITEM2 with the values 'A' and 'B' when a tab is clicked.
<li>What you do is , create a blank page say 110, and let the tab redirect to page 110.
<li>Now that we have reached 100, next task is to redirect to the required page 100 from 110, without really loading 110.
For that, create a branch in Page 110 with a Branch point of "*On Load: Before Header*" , Page is 100
for the "Set these items"
P100_ITEM,P100_ITEM2
With these values
A,BThe branch is just like any you create to set page item except that it runs onload before header.
Now if you try to load page 100, it redirects to page 100. SO when the tab redirects to 110, the branch in 110 takes it to page 100.
Have I made it clear now ?

Startup problem after use in target disk mode with a PC. Ideas?

I used my Mac 10.4 in traget disk mode. Data transfers between Mac and PC worked fine (via Macdrive 6). After disconnecting and trying to boot normally, Mac doesn't recognize internal volume. It flashes the question mark.
Tried to repair disk via install DVD - disk utility found no problems.
Reapired permissons.
Reset PRAM and NVRAM.
Tried Startup utility - found the internal volume and even after selecting it for startup, I still get the flashing question mark.
Apple hardware test found no problems.
Archive and reinstall is not allowed.
Data can still be accessed fine via target disk mode.
Any ideas how to reinitialize or reset the startup volume?
Powerbook G4 Mac OS X (10.4.8)

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

Is there a way to print using a canon bjc-85 with tiger?

i have just installed tiger and now my canon bjc-85 printer doesn't work with it.
i have read the thread discussing this problem, and i'd be very grateful uf anyone can tell me in simple language how i can overcome this apparent incompatibility?
kind regards
paul godfrey

the product is support on mac os tiger. you just need to download the drivers for the product. if you have the black ink tank installed it will not print until you change the cartridge type in the printer settings under the quailty and media menu.

My printer will not print using Mozilla. No problem with other browsers. This is a new problem. Mozilla worked until last week.

My printer works fine when I print from Microsoft Word or other browsers.

This is the only official support forum for Firefox.<br>
You could be scammed on other sites.
Yesterday, we had a spamming attack on the forums.<br>
This sort of thing has never happened before, on all of my time with the support forums.<br>
Sorry if any posts offended you. The moderators are working hard to prevent this sort of thing.
For the best support results, I suggest that you remain on this forum because it is run my Mozilla.<br>
Thank you and again sorry for any spamming that you encountered yesterday.
----

VLANs not passing thru trunk with 4404WLC

APs get IP addresses, but VLANs do not work. Switches look ok with trunking, etc. The SSID works, I get good signal, but no IP, via DHCP or hard-coded. It did work at 1 time, but no longer.

Just to get some stuff clear for LWAPP L3;
As fas as i know the AP's do not need a trunk port in pricipal. The are connected to a switch port in access mode. The vlan assigned to this port should be the VLAN/subnet from which the AP's get their IP address.
The WLC however must have trunked data ports. These data ports carry all the vlan's to the WLC.
Right?

Pass Thru DHCP with Aironet 1231G

We have 12 - AP-1231G access points in our warehouse with 2 SSID's, both on different VLAN's. We would like to set one of the VLAN/SSID 's to use DHCP from a windows DHCP server.
Is this possible to do with option 43 or is that only for lightweight AP's ?
Sho ver: Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(8)

Thanks !!
will the DHCP server vendor class need to be configured ?
Also, I am seeing the cmd "ip dhcp relay information trusted" on some forums - is this also required ?

What printer using bluetooth will work with an android tablet

what printer using bluetooth technology will work with an android tablet

The iPad mini supports Bluetooth keyboards in the same way that all other iPad models have. There are not many keyboards available yet that are specially designed for the mini yet, but I am sure the will be soon. In the mean time you can use any Bluetooth keyboard that is designed for the bigger iPad, Mac, or whatever.

New Version Of iTunes Wont let me use "multiple speakers" thru airtunes...

The New Version Of iTunes Wont let me use "multiple speakers" thru airtunes with airport express.
I have used airport express to play music while simultaneously playing it thru my computer speakers, but the new version of iTunes wont let me select "Multiple Speakers" from the menu at the bottom of the window

There doesn't seem to be a link to this firmware update, can you repost it? I'm having the same problem.
Thanks
J

Printing using raw pass thru mode with PCL 5e

Similar Messages

Maybe you are looking for