Printing using the built-in print drivers launches a PowerPC App.

According to CNET: "Canon, Epson, and HP have all also announced that full universal binary drivers for their Apple peripherals will come with the iMac Core Duo as part of OS X 10.4."
So one would think that if you use said drivers printing would not require Rosetta. Alas - it does.
When I print using the built in drivers which are supposed to be Intel native I have noticed that PrintJobMgr is launched as a PowerPC application (I have been watching it in Activity Monitor). PrintJobMgr is Universal, so is lp and so is the App that gets created when you install the printer.
Is anyone else experiencing this? Any thoughts? The driver that it is supposed to be using is the built in HP InkJet 2.7.1.

I didn't migrate from my powerbook - I only copied over a couple select files by hand (I rsync'd my iPhoto and iTunes and copied over my mail and documents).
I am fairly sure that I have the original HP (and supposedly Universal) drivers and I was aware of the migration bug. That is why I am concerned.
If you are using the built in drivers, print something while watching Activity Monitor. Does PrintJobMgr show up as Intel or PowerPC?
The printer in question is an HP 6840.

Similar Messages

Why doesn't printing use the default printer?

I have two main printers to use at home and whenever I print a web page, Firefox automatically prints using the non-default printer. If I select the default printer from the drop down list, it works fine. I shouldn't have to select the default printer every time I want to print.

Note that NONE of the replies answer the original question.
The key word in the question is "'''Why'''" and "default printer" refers to the system's default printer.
Why does Firefox behave differently than any other Win app when it comes to printing, ALWAYS use the system's default printer UNLESS the user changes it (''and NOT memorize the choice'').
To put it another way, '''Firefox should NOT always use the last printer selected'''.
'''This non-standard printing behavior should be changed.'''

How can we print using the windows printer dialog window?

Hi,
We recently got new printers and a printer setup on our server that are set to print in greyscale as a default. In the past the printers defaulted to printing in color. When I create VI's and reports I have used to set "Print on completion" or the print option from the Report Generation Toolkit, and I have received my prints in color. After changing the printer drivers on the server any printing method I used to do from LabVIEW will always produce greyscale prints. These prints are fine for everyday use, however we need color prints when the documents are for customers or for other official use.
If I could only send documents/VI's to that process the user could override the "greyscale" setting and select "color" in the cases where we need a better looking print. Obviously the other option is to save the document/VI as a file and later print it from any windows software (Excel, Paint etc.).
Do anyone have any neat tricks for printing using the windows printer dialog?

You can change printer settings programmatically via a .NET assembly. You can also bring up the Print Dialog to change settings manually before printing.
More info on the .NET assembly for colour settings here:
https://msdn.microsoft.com/en-us/library/system.drawing.printing.pagesettings.color(v=vs.110).aspx
An NI KB link on calling a print dialog:
http://digital.ni.com/public.nsf/allkb/80DD23A28BD8ADF9862575AC0077B1BB?OpenDocument
CLD

How do I use the double sided printing with my HP Officejet 6500A plus

I need help with learning to use the double sided printing with my HP Officejet 6500A Plus

Click on the Show Details button just above:
You can configure various options from the dropdown menu just below Orientation.
Printing two-sided requires a two-sided adaptor for the printer. Otherwise, you have to print out odd numbered pages first, turn them over and reinsert into the paper feeder, then print even numbered pages. If you do it right you get a nice two-sided document. If you do it wrong all the even numbered pages will be upside down.

I can not print an PDF using the Adobe PDF-Printer with Acrobat DC

Hi all,
i installed the Trial of Acrobat DC but it dont let me use the Adobe PDF-Printer well, because i cannot print from any third-party-application using Adobe PDF.
I tryed to print from within Word, Editor and Browser and selected the Adobe PDF-Printer as target, but at 75% both, the Application from which i print and the PDF-Creating-Wizzard are freezing (for hours) and i need to kill the procesed. No PDF-File is created. Same Problem with trying to print a Testfile from within the Windows-Printer-Dialogs.
Only Adobe DC cause this issue, if i use freeware like Bullzip PDF the files get created successfully, so i assume its not a generally problem with PDF on my system.
What could be the problem? (pls dont say its because of the trial, a trail should allow to test all features and Why should i buy a programm if it cannot do what a freeware can do?)

Hey Daniel,
Have you tried repair Adobe Acrobat DC?
If no, then please repair the installation under Help menu.
This could also happen due to an Adobe Acrobat DC installation file corruption. To resolve this issue :-
Uninstall Adobe Acrobat DC using the Acrobat cleaner utility.
Restart your computer.
Re-install Acrobat Acrobat DC Download Adobe Acrobat free trial | Acrobat Pro DC.
Let me know if the issue persist.
Regards,
Aadesh

Problem creating PDF file using the Adobe PDF printer

Apologies if I have hit the wrong forum for this issue.
I am using Adode Acrbat 9 PRO version 9.4.6 on a Windows 7 SP1 machine.
I am running an application that presents information on web pages that I need to capture as pdf files. I am using an automation tool so it is limiting my posibilities of accomplishing this task.
I am attempting to use the Adobe PDF printer as the vehicle to create these PDF files but have encountered the following issues
The page is truncated on the right hand side
Only 1 page is created when I was expecting 7
I have specified a file path for the ADOBE PDF Output Folder ... C:\Windows\Temp and
checked the box "Add document information" but I am not given the opportuniy to enter a file name. It is using the file name from the URL
To verify my PDF content I used a different method to create the PDF from the same web page
Right click within the web page and select Convert to Adobe PDF. The pdf file has the full content with no truncation and is 7 pages in total.
Unfortunately I am unable to use this method with my automation tool
Any pointers will be gratefully received

Some progess
I changed the page orientation to landscape and that removed the truncation. I am not sure why it is not using the "shrink to fit" but for the purposes of this exercise I can live with this solution.
If I click Print Preview I can view all pages and then if I select the Print Icon I get a PDF file containing all pages. This is so bizarre.
So to recap
File > Print > Adobe PDF Printer only creates 1 page
File > Print Preview > Print Document (Alt +P) > Print >Adobe PDF Printer creates 7 pages
I guess this would be a good time to call support to see what they have to say on this topic.

How do I print just one page of a .pdf using the android e-Print app?

How do I print just one page of a .pdf using the android e-Print app?

Hello,
I see that you're having an issue with printing just one page from the E-print app.
Unfortunately, on an android device, you do not have the feature to select how many pages you want to print
Thanks!

Can Firefox be set to use the system default printer?

I would really like it of Firefox would use the system default printer set in the control panel, similar to the way office programs do. Is there no setting in about:config to do this? Or an add-on perhaps?

I really, really wish Firefox would change this, but I did find one thing.
In about:config I set:
print.print_printer to null
print.save_print_settings to false
Now it seems to use the system default. And it doesn't remember any changes with in a session, or from one session to the next. It always uses the system default printer.
I realize different people have different preferences. But on my system the default printer changes automatically depending on what wireless network I'm on at the moment. I wanted Firefox to reflect that.

I can't use the function of "print to video".

I've recently purchased FCPX and Blackmagic Design Decklink HD Extreme 3(version 7.5.2) but I already know this combination looks quite weird because I'm using only DSR. This is the first time I have installed FCP.
I installed FCPX and figured out there's no way to get the video from Decklink on FCPX so that I deleted FCPX, installed FCP 2009 instead and installed FCPX again on the same disk as Final Cut Pro 7... It's a shame to get rid of it.
At first, I could get a good result when printing to tape. There's no problem. But it's not long before I failed to get what i wanted. VCR detects input signal from FCP 7 through Decklink but the monitor of VCR shows only noise. For now, I can't use the function of "print to video".
Also, I connect the input of Decklink to the output of DSR and the output of Decklink to the input of DSR at the same time and monitor w/ the output of DSR. However, the output on the monitor shows something weird when I capture the video from DSR as if the signal is fed back.
Someone told me that I have to use other version of decklink but i'm not sure it would be better if I just change the version.
What's wrong?
What should I do for fixing these all mess?

I've recently purchased FCPX and Blackmagic Design Decklink HD Extreme 3(version 7.5.2) but I already know this combination looks quite weird because I'm using only DSR. This is the first time I have installed FCP.
I installed FCPX and figured out there's no way to get the video from Decklink on FCPX so that I deleted FCPX, installed FCP 2009 instead and installed FCPX again on the same disk as Final Cut Pro 7... It's a shame to get rid of it.
At first, I could get a good result when printing to tape. There's no problem. But it's not long before I failed to get what i wanted. VCR detects input signal from FCP 7 through Decklink but the monitor of VCR shows only noise. For now, I can't use the function of "print to video".
Also, I connect the input of Decklink to the output of DSR and the output of Decklink to the input of DSR at the same time and monitor w/ the output of DSR. However, the output on the monitor shows something weird when I capture the video from DSR as if the signal is fed back.
Someone told me that I have to use other version of decklink but i'm not sure it would be better if I just change the version.
What's wrong?
What should I do for fixing these all mess?

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

My Macbook pro OS 10.10.2 suddenly will not communicate with my Cannon MX890 printer. I reset all printers and now I cannot seem to add a printer by using the Add a printer function. Ideas?

The appearance of the printer in the Default view of the Add printer window relies on a protocol called Bonjour. There have been quite a few users who upgraded to Yosemite only to find that their wifi printer is no longer visible. Until Apple resolves this issue you can add your printer using the LPD protocol. To do so you will need to determine the IP address being used by the MX890. This can be done via the touch panel under Device Settings > Network Settings.
Once you learn the IP address then on the Mac you can click to add the printer and select the IP icon. Here you can enter the IP address, set the Protocol to Line Printer Deamon and leave the Queue field blank. Then change the name to Canon MX890 and in the Use menu, browse for the Canon MX890 series driver. Then click Add to complete the printer creation.

Can I scan a document to Microsoft WORD using the HP-4630 printer?

When scanning a document/photo/etc. using the HP 4630 printer, there's not an option to scan it to Microsoft WORD. Is that possible? If so, please tell me how. Thanks!!

Hi, From its specs, it does not have an OCR software : http://support.hp.com/au-en/document/c03839855 You need to buy an OCR software to be able to scan to test, searchable pdf .... properly OR you can try: http://office.microsoft.com/en-au/word-help/scan-and-edit-a-document-HA010254879.aspx http://free-ocr-to-word.en.softonic.com/
http://www.free-ocr.com/ Good luck

When i print using the email option, the hpeprint site shows the incorrect time for printing

when i print using the email option, the hpeprint site shows the incorrect time for printing

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

Many apps when it comes time to print from my ipad 2 search for an air printer and i only have an HP wireless printerand i only have a wireless HP printer but they don't find it what can i do to use the HP wireless printer???

Many Apps nwhen it comes time to print from my Ipad2 search foor an airprint printer but i only have an HP wireless printer and they don't find it what can I do to use the HP wireless printer in these apps????

Hello Jfadair9,
Thanks for the post. I'm not sure which model printer that you have but you should be able to print from your iPad 2 with the HP Home and Biz application. This is for wireless printers that are NOT web enabled. I've included a link below with some great information on how to get this resolved. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en &product=1153494&tmp_track_link=ot_search
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01930282&cc=us&dlc=en&lc=en &product=1153494&tmp_track_link=ot_search
I work for HP but my posts and replies are my own....Thank you!

Install Printer Using the System

The guy in the store showed me how to install my printer using the Mac system rather then the disk I got from HP. Could someone show me again.

Select Mac Help from the Finder's Help menu and search for "add printer" without quotes. The first article gives step by step instructions. You should also read the user manual that came with your printer which also may have instructions.

How do I use the built-in camera or webcam?

I know this may sound very elementary but there was no documentation with my Mac when I bought it new (except a thin flimsy pamphlet with very baic stuff in it) and the help menu comes up with nothing at all when I search for web cam, webcam or isight.
Where do I go to learn about how to use the built-in camera/web cam as a camera and also as a web cam?
Thank you

VortexBoy wrote: ... I know this may sound very elementary but there was no documentation with my Mac when I bought it new (except a thin flimsy pamphlet with very baic stuff in it)...
There should have been a seventy page booklet in the box with your new iMac. If yours is the latest version, clicking here will download it if you cannot find the physical copy. If yours is an older iMac model, you can search for the correct manual from the iNtel iMac Support Page > "Manuals" link.
After that, Mac 101 is a great web-based information source. If you don't need general help, take a look here for specifics about each application of interest.
VortexBoy wrote: ... and the help menu comes up with nothing at all when I search for web cam, webcam or isight....
If your posted info is correct that you are running Mac OS X (10.7.3), you should be able to get started by using your Mac's Finder > Help menu command. Searching for "camera" (without quotation marks) on my 10.7.3 Mac returns Mac's Help article entitled "Use your Mac’s built-in camera." This is the web version of the same help.
Other apps, like QuickTime Player (the Lion QT 10.x version), and iMovie (part of iLife that came with your Mac) can also use your iMac's camera.
iMovie Help or this web page version of the same help will explain how to "Record video directly into iMovie".
Use QTX Player's File > New Movie Recording menu command to record video with it. You can configure size and quality of the recorded material by using QTX's preferences as shown in this image:
VortexBoy wrote: ... Where do I go to learn about how to use the built-in camera/web cam as a camera and also as a web cam? ...
Different apps do not all work the same. For function-specific help, search Help in separate camera applications; i.e., after you launch Photo Booth, iChat, QTX, iChat, etc., use the individual app's Help menu command to search for more info on the camera or what you want to do.
This article offers great basic tips about how to position, light, and use built-in cameras. Although its subject shows it was written for iMacs, it is equally applicable to other reader's inbuilt Apple cameras, too.
For more specialized functions than those offered by the camera software already included with your Mac, you can search the Mac App Store for other apps that can use your camera.
For webcam help with iChat, use Apple's iChat Support page if you need more help that that provided in the dialog boxes and iChat > Help on your Mac.
To use your camera with FaceTime, search your Mac's FaceTime > Help or these web versions of the same Help topics that should be available on your Mac.
Skype or other third party webcam apps will offer their own Help menus of varying quality. In additon to these app Help services, some apps offer comprehensive Support services via their web page. If you decide to add Skype to your Mac, you can click here to review the excellent Skype Support pages.
If you need to start a new topic for specific questions after you get started, give as much detail about what you want to do and what you may have already tried unsuccessfully. We will offer specific suggestions based on the details you provide.
Enjoy your new Mac!
EZ Jim
Message was edited by: EZ Jim
Mac OSX 10.7.3

Printing using the built-in print drivers launches a PowerPC App.

Similar Messages

Maybe you are looking for