Printing using the ePrint Center...can't possibly be this limited?

Hi, I've just installed an Officejet 7500A Wide Format e-All-in-One and am trying to get the ePrint Center to work...
Any image files I email are rejected by my printer. It spits out a blank page and then tells me the paper size is wrong, with no other option but to cancel the whole job.
I see you can only send images above 100dpi - which is kind of dumb as most images you pull off the web are 72dpi and there's a 5mb limit so you can't print many 300dpi images either but hey - but when it says you can only print to 4x6, does that mean it won't print out on A4 at all?
Surely this can't be right? That I'd have to - in advance - replace the A4 paper with 4x6 photo paper before I leave the house, just in case I want to print an image while I'm out by email is weird enough...rather negating the convenience of the whole shabang...but I'd have to print only 4x6 images that happen to be above 100dpi? What if the image is bigger than 4x6?
I've got this wrong haven't I? Surely?
Matt x
PS I've got the mobile app which is peachy but my iphone doesn't swap files with PCs very easily <understatement> so that won't help with printing files off my netbook.

Hi mattinkent,
You can use the HP ePrint Home & Biz app found HERE. This app will allow you to change the paper size on the fly, so you can print the photo on A4, bypassing the need to preload the 4x6.
First, you'll want to create an ePrint account HERE. Then, enable ePrint on your printer and register the printer with your ePrint account. Click HERE for guide on setting up ePrint on your printer.
Lastly, you'll want to add the printer to your HP ePrint Home & Biz app.
Let me know if I can be of any further assistance.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Similar Messages

The ePrint center can not release my email address what I deleted. So, I have to change another.

The ePrint center can not release my email address what I deleted. So, I have to change another.
How can I use the address again?
Thanks.

Hello GeorgeChang,
You can not use the same custom ePrint email for your printer until it becomes unlocked in six months. Sorry for the inconvenience.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Printing through the eprint center

I have a 8500A plus and can't seem to figure out how to get the attachment to print when an email is sent to it from the eprint center.

Hi mattinkent,
You can use the HP ePrint Home & Biz app found HERE. This app will allow you to change the paper size on the fly, so you can print the photo on A4, bypassing the need to preload the 4x6.
First, you'll want to create an ePrint account HERE. Then, enable ePrint on your printer and register the printer with your ePrint account. Click HERE for guide on setting up ePrint on your printer.
Lastly, you'll want to add the printer to your HP ePrint Home & Biz app.
Let me know if I can be of any further assistance.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

I am having trouble adding a printer to the eprint center.

I am logged in, so next I go to add the printer, it opens a box and asks me to enter my code. I have the sheet which just printed out. I put in the code without the email part @hpeprint.com, I hit ok and I get this hour glass that just stays there and never does anything. I have tried this quite a few times and have had no luck. I even reset all settings on the printer, got a new number and tried it again.
Anyone know why that is happening on the website?
thanks

Hey Sportsman7!
I don't think there is currectly any problem with the website. What browser are you using (IE8, Firefox, Chrome, etc.)? If you have a different browser, try adding it from there. If not, you can go to either firefox.com or google.com/chrome to download a different one. I just tried adding one of our printers to eprintcenter and it worked.
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Label Printing Using Address Book - How can I Print multiple labels of the same name?

Label Printing Using Address Book - How can I Print multiple labels of the same name?

I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
After printing, trash the added versions.

Why can't I use the update center in 9i Jdeveloper any more?

why can't I use the update center of 9i jdeveloper with my otn username and password anymore?
Is there any problem?

Hi,
We're aware of this issue and are looking into it.
Thanks,
Brian
JDev Team

I can't use the control center from my lock screen.

I just updated my iPhone 5c to the ios 8.0.2, but previous to that update I was able to use the control center from my lockscreen. But now, I can't. I already tried to disable restrictions and it didn't work. Please help.

Check the settings for this And make sure that the availability of the Control Center from the Lock Screen is turned on.
Settings > Control Center > Access on Lock Screen
If it is turned on there try a reset of your iPhone. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.

How can we print using the windows printer dialog window?

Hi,
We recently got new printers and a printer setup on our server that are set to print in greyscale as a default. In the past the printers defaulted to printing in color. When I create VI's and reports I have used to set "Print on completion" or the print option from the Report Generation Toolkit, and I have received my prints in color. After changing the printer drivers on the server any printing method I used to do from LabVIEW will always produce greyscale prints. These prints are fine for everyday use, however we need color prints when the documents are for customers or for other official use.
If I could only send documents/VI's to that process the user could override the "greyscale" setting and select "color" in the cases where we need a better looking print. Obviously the other option is to save the document/VI as a file and later print it from any windows software (Excel, Paint etc.).
Do anyone have any neat tricks for printing using the windows printer dialog?

You can change printer settings programmatically via a .NET assembly. You can also bring up the Print Dialog to change settings manually before printing.
More info on the .NET assembly for colour settings here:
https://msdn.microsoft.com/en-us/library/system.drawing.printing.pagesettings.color(v=vs.110).aspx
An NI KB link on calling a print dialog:
http://digital.ni.com/public.nsf/allkb/80DD23A28BD8ADF9862575AC0077B1BB?OpenDocument
CLD

Adding Printer Error on Eprint center

I have signed up for the eprint services and I have an account. I've use the eprint functionality; however, when I sign in now, it says that it can find my printer settings. However I can print from my phone, I just can't utilize the print center to check on the que status? What can I do? The error I recieve is as follows.
Couldn't add printer: [Errno 1] _ssl.c:480: error:14094416SL routinesSL3_READ_BYTES:sslv3 alert certificate unknown

Hello there!
Thanks for including the error you received. I'll have the engineers take a look to see if we can determine what's causing the problem you're experiencing.
I'll make sure to keep you updated here!
Thanks!
ePC Helper
Although I am an HP employee, I am speaking for myself and not for HP

Connecting to the eprint center

I recently purchased an officejet 276dw printer. Averything is working well except the fact that it won't connect to the eprint center (A problem a lot of people seem to be having).
I've installed all updates on both router and printer and I've set a static IP address and DNS server but it still refuses to connect. If I go through the same process with a wired connection it has no complaints and connects fine. Any ideas on what the issue might be because if I can't get it to connect wirelessly it's realy no good to me. And yes I've turned both printer and router off and on again.
Thanks

Hi S.sofocleous,
I'm not sure what exact message your are getting with Game Center, but here is an article for troubleshooting error messages when signing in.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Thank you for visiting Apple Support Communities.
Nubz

Loading flat files located on a server using the Control Center piece ofOWB

Loading flat files from a server with OWB
I am successful loading files with OWB, as long as they resided on my workstation in the C:\ drive. I copied the files to a Linux server into directories owned by Oracle/oinstall, permissions on the directories containing the files are 777. I ran the OWB client from the server with the following results:
Error
RPE-01013: SQL Loader reported error condition, number 1.
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
I tried to load the file using the control center from both the windows client and the server client. Can I do this from either one?
I can't import the file in the Design Center from the /u00/data/owb_repos1 directory, it does not show up.
If anyone has received similiar errors from OWB, please tell me how I can fix this. THANKS!!!
[d97886@owbtest owb_repos1]$ pwd
/u00/data/owb_repos1
[d97886@owbtest owb_repos1]$ ls -la
total 24
drwxrwxrwx 2 oracle oinstall 4096 Mar 19 12:14 .
drwxrwxrwx 18 oracle oinstall 4096 Mar 6 16:41 ..
-rwxrwxrwx 1 oracle garrett 1481 Mar 8 07:32 state_codes.csv
[d97886@owbtest owb_repos1]$

Hi
This is what i do for my flat files (i am loading my tables from the flat files):
1) Create location for the files in OWB and it should look something like \\path_to_where_the_files_are. Here you should be able to browse to your Linux box and select the location of the files.
2) Then check whatever you use (i use TOAD) and you should see in owb schema a directory created there which points to the location of the flat file.
3) then just follow the guide to sample the files etc and you are good to go.
Basically OWB has to be able to see the files that are on Linux machine.
Alternatively you can map your Linux share to your windows box (use samba or something) and use it that way.
Sorry if it is stating the obvious.
Hope this helps
Kind Regards
Vix

How can I block all other mail account just to only use the exchange mailbox of our company? This is to prevent the user to setup his on company iPhone.

How can I block all other mail account just to only use the exchange mailbox of our company? This is to prevent the user to setup his on company iPhone.

I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!!

Trying to install printer - get the message "You can't open the application "OSX installer" because PowerPC applications are no longer supported."

I am trying to install print controller and printer -but get this error message when trying to use the installer:
You can’t open the application “OSX installer” because PowerPC applications are no longer supported.
I also have a macbook pro running the same version OS and it installed fine there - I can't find the difference; but, NEED to print from my IMac.
Any help and/or suggestions would be greatly appreciated
Thanks!

I'm guessing you've tried Fiery's website for updated drivers? I wonder whether Lion drivers would work? Anything of use here:
http://fieryforums.efi.com/showthread.php/2824-OS-10.7-compatible-drivers-availa ble?s=c8afc71d2746a67970bb42d50538898c

Determine a GL account using the cost center only as reference

hello, Is it possible to determine a GL account using the cost center only as reference?
If so, could you please provide me with the details?

Hello,
I am really not clear on your question.
If you want to make default cost center, then please go and maintain OKB9 settings.
If you want to generate a report based on a cost element (GL account in FI), go and execute KSB1
Regards,
Ravi

Error Message: You muyst have IE 5.5 or higher to use the Contact Center Manager Admin.

Trying to download an application for work, Tried on the IE 8, 10 & 11 with no add ons and in the compatibility mode and it will not work. I continue to get the error message: You must have IE 5.5 or higher to use the Contact Center
Manager Admin. I do have the credentials and the admin over me to try and neither one of us can do this. I have a windows 7 computer and I didn't have this problem with my other one, but since Feb or March we have had major issues with IE.
We need help as others are having this same issue.
Thanks

Trying to download an application for work, Tried on the IE 8, 10 & 11 with no add ons and in the compatibility mode and it will not work.
Hi,
Did you mean that this problem occurs when downloading an application from a website? Would you please provide a screenshot for your problem?
Roger Lu
TechNet Community Support

Printing using the ePrint Center...can't possibly be this limited?

Similar Messages

Maybe you are looking for