Printing varying pictures onto a single sheet

I have got the hang of printing a single picture onto a sheet.
Is it possible in Elements to simultaneously print varying sized prints onto a single A4 sheet to enable minimum waste of photo paper?
Your feedback will be appreciated.
Hummingbirdman

Don't know why paste would be grayed out. All I can guess is that the picture never made it to the clipboard. Did you try it again?
Just to test that the picture is in the clipboard, try File > New from Clipboard.
Another thing to try, instead of the copy/paste thing, is to open both the A4 and your picture. Activate the picture and drag the Layers palette thumbnail onto the A4. This will create the new layer same as the copy/paste method.

Similar Messages

How can I print multiple pictures on a single sheet?

Today 3/27/2012 I tried downloading HP software that says it has a new feature that allows printing multiple pictures on a single sheet of photopaper. The download started and halted at only one square and sat there flashing for hours, meaning it wasn't downloading on my Pavilion desktop computer. Since it's a new feature (apparently), no wonder no one as yet has asked this question and so I doubt if anyone has the answer. But, I'll wait to see.

You are probably going to get help by posting in the iPhoto forum. You can easily locate it by clicking on Apple Support Discussions on the top left of this page then navigating to the iPhoto forums.
Roger

How do I print multiple pictures on a single page in iPhoto?

I'm trying to print different pictures on a single page using iPhoto. How do I do it?

You are probably going to get help by posting in the iPhoto forum. You can easily locate it by clicking on Apple Support Discussions on the top left of this page then navigating to the iPhoto forums.
Roger

Printing many checks on a single sheet

Is it possible to print more than one check on a single piece of paper?
The requirement is just to print cheques, and not provide address details or remittance details.
has anyone done this before?
Is there some logic that will stop this?

Hi,
Are you talking about printing duplicate check details on a single sheet or the original checks on a single sheet. Are you using the check stationery supplied from the Bank or is it somethng else.
If you wish to print original checks on the pre printed stationery supplied by the bank, then you cannot print many checks on a single sheet
But if you wish to print duplicate chekcs on a single sheet, you have to co ordinate with your abap consultant who can help you further. I am not sure if this can be possible as the checks are printed page wise.
hope this helps
regards,
radhika

Printing multiple images on a single sheet

Hi everyone.
I haven't been able to do this, nor find help about it. I need to print various images, each having its specific dimensions, onto a single 13 x 19 in sheet. The closest I've come to, was using the book module, dropping the images onto a single page with various image placeholders. But, in that case, I have not been able to fix the exact dimensions of each of these placeholders.
Thanks for any help.

To the best of my knowledge there is no equivalent to the Photoshop "picture package" printing. I was hoping for this feature with 2.0, but alas it did not appear. In addition to the book layouts, you can try printing light tables. I have found that this works pretty well for photo montages. Some of the problems with using light tables for this type of work is that the user has almost no control over the light table size and shape (it is growing whenever you move an image close to the light table edge) and also the light table will not allow for more than one copy of an image (so the technique works for photo montages, but not picture packages). Just make sure you position the images such that the general shape of them together represents the paper shape (rectangular or square), then right-click on the light table background and select "minimize size" to get ride of the extra light table area in the periphery. Finally select File->Print Light Table. Once you pick the paper size, Aperture will resize the images as needed. Unfortunately, the user has no control over each image's size, only the image size relative to the paper and the other images on the light table. A kludgy solution, but it works for some applications.

Printing multiple pages on a single sheet with SAPScript

Hello,
I am using SAPScript on ECC 6.0. We currently have a form which occupies the top half of an A4 sheet of paper. The form is printed on pre-printed stationary provided by the government. The government has now issued a new version of the pre-printed stationary which allows a single page to contain the form twice. The form is a with-holding tax receipt that we issue to a vendor.
We now wish to use this stationary to print 2 different instances of the form to a single sheet. The different instances will be for different vendors and have different contents. The stationary is provided perforated so we can split them apart after printing.
Does anyone know how to make SAPScript print 2 instances of a form to a single sheet of paper using a laser printer?
Thanks in advance,
Ben

Hi Ben,
Use this control command in the sap script main window and split the main window into two parts. This will solve your problem. If you require further info please let me know.
/: NEW-WINDOW
Use of this command is as described below.
Each page can consist of up to 99 main windows. Each main window is assigned a consecutive identifying number (0..98), and the windows are filled in this order. This feature enables SAPscript to print labels and to output multi-column text. When one main window fills up, the next main window on that page is taken, if there is a next one. A page break is inserted after the last main window.
You can use the NEW-WINDOW command to call the next main window explicitly, even if the current main window is not yet full.
OR****************************************
You can call this script control command through your printprogram after filling your first instance of main window using function module CONTROL_FORM.
reward if helpful.
Thanks & Regards,
Kalyan.
Edited by: Kalyan on Jan 4, 2008 9:50 AM

Print multiple pictures on one page..so frustrating please help

Just trying to print multiple pictures on a single piece of paper. The drop down menu that says "print multiple pictures on page" is grayed out and wont let me select it. I have read thread after thread , watched tutorial after tutorial and nothing addresses this simple command. What am I missing. Thank you in advance for your help

Select the pictures and type Command+P to bring up the Print window. Then click on the Contact Sheet option at the left. You can change the number of photos per page and their size by clicking on the Customize button and the changing the number of columns on the page. The size of each photo will automatically be scaled to fit.
If you want a specific size, then instead of selecting Contact Sheet select a print size. The size you select will determine how many photos of that size you'll get on the paper size selected.

Scan 2 images (front and back) onto a single page

I am using an HP 5520 and want to scan both sides of a card onto a single page. Can this be done ? My workaround is to scan both sides then combine the two images on a page in MS Word but I feel sure it should be possible directly from sacnner without using Word

Hello Risky1st,
Welcome to the HP Support Forums!
I understand you are looking for a way to scan and print two images on a single sheet of paper, from the setting I have seen on the printer, this is not an option.
The work around you have found is the best and only thing I can think of too.
I wish I had better information to share, but have a great weekend just the same.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How to change page settings trying to print 4 photos in 8/11 sheet

Using my I pad wirelessly to hp envy 4500, I don't have the option to change my page settings, any help

Hello Julianoadel,
Welcome to the HP Support Forums!
I see that you are looking to print four pictures onto a 8.5x11 page from your iPad to the ENVY 4500. When printing with an iPad you have very little options to change / adjust when printing, this is caused buy the limitation of AirPrint.
I do now know if this will give you the option to print the four pictures on one page, but it will provide more features and settings for printing, install and use HP ePrint App on the iPad.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How to print a booklet in A5 hor sheet format?

Hi everybody,
from a couple of days I'm trying to print a booklet onto a A5 sheet's format. Each sheet should display 2 columns. The personal setting are 13 mm margin all around the sheet and 26 mm between the 2 columns.
When I'm trying to print, personal setting are not respected and the Reader prints with its own margin's setting which I cannot modify as i need. All this cause that the print area turns to an A6 format.
Default margin of the software are 25 mm all around the sheet and I don't findo no optiono to modifay them.
Someone can help me? Thanks!
Bo.

hi
u can use
<b>FORMAT INTENSIFIED ON.</b>
regards
ravish
reward if useful

How can I print the multiple board in one sheet?

Hi All,
Could you please tell me about printing the boards.
I want to print a copy of the board in same paper, eg. copy of 4 x Bottom-layer in one sheet (A4).
Many Thanks,

Hi,
Your attachment is abit hard to see, but from what I can tell it seems like you want to print a copy of the same layer multiple times on a single sheet? Or do you want to print various layers on a single sheet?
1) The same layer cannot be printed multiple times on a single sheet unless you copy and paste your board on the same workspace.
2) Printing multiple layers on a single sheet can be done, by going into the print dialog and unchecking the option to "Print layers on seperate paper"
Hope this answers your question,
M.I.
National Instruments
EWB Group.

Printing 2 photos borderless on single 4x6 sheet?

Ok, Ive been trying to get this to work without any luck. I'd like to print 2 pictures, borderless, on a single 4x6 sheet (cropped to fit as nicely as possible).
Can someone outline what permutation of options I need from the print menu? I've tried custom sizes of 3x4 (which should go side-by-side to fill the 6x4), and n-up printing from my ip5000 print menu - all without any joy.
Tips?
Jonathan

Just went through the same frustrations. I can't believe they've made what I think is a pretty common task so difficult.
Like you, I found that the default layout wasted so much space around the photos. I had chosen "borderless" and expected it the fill the space.
I ended up monkeying with the "custom" size until I found a setting that got as close to the edge as possible without it reverting to 1 photo per page. 2.75" x 3.75 was the best I found.
The software that came with both my Canon and HP does a much better job.

Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet?

Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet? I don't need the calendar grid. I just want a list of events on a particular calendar, and their dates. Is that possible?

Not easily. Two possibilities:
1) If all the events have some common feature (eg you have included "XXX" in all the summaries), search for that feature then select and copy the found items at the bottom of the window. You can then paste them into TextEdit or a spreadsheet for printing
2) You could write an Applescript to locate the events and write them into a text file for printing.
The first one will probably give you what you want.

I want to print multiple pictures on 81/2 x 11 sheet of paper

How do I print multiple pictures on an 81/2 x 11 sheetof paper?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

How can I in iPhoto print multiple pictures on one 8x11.5 sheet

I want to print multiple pictures on one 8X11.5 sheet using iphoto.

Select the photo and print - select the printer, the paper size and the print size (do the math to be sure they will fit) and if the preview does not reflect the multiple photos click customize in settings select multiple photos per page - the preview will reflect this selection - print
LN

Printing varying pictures onto a single sheet

Similar Messages

Maybe you are looking for