Printing via Airport Express does not Work

I have been using an Airport Express Basestation with my Mac Mini and Epson Stylus 880 for about a year without a problem. Now I have moved to an Intel iMac and cannot print via Airport anymore. The file get´s spooled but then I get an error message saying that the printer driver might be incompatible. If I use the same driver with the local USB port everythings works fine.
Please help,
Ingo

Ingo,
try this link:
<http://discussions.apple.com/message.jspa?messageID=1674987#1674987>
Deivy

Similar Messages

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

Help Needed: Airport Express does not work

My Airport Express was ok until one day I setup it under bridge mode in a hotel room. Now neither my iMac and Dell laptop can update the settings in the Airport Express. It always shows error in reading the settings.
I have tried soft, hard reset and also tried to bring it back to factory settings. However, all these trials were not successful. It did not even blink with green light when I tried to reset it to factory settings (hold the reset pin, plug in power socket and then release the pin... I believe I did it right).
Also the network name I created in this Airport Express did not change to default name. The Airport Express name was restored to default though.
Does anyone know how to fix this? Do I have to send the hardware to Apple to fix it or it is just a software failure that I can fix at home with you guys help?
Thanks!

Same problem here -- followed instructions to do factory reset to a "T", never saw blinking green LED. Instead led blinks yellow. Always get an error in Airport Utility.
Apple had best quit poking fun at how lousy Microsoft stuff is before someone sees the large number of product complaints logged in the forums. It isn't smart to toss stones in a glass house.

Why my older Airport Express does not work with OS-X 10.9?

After getting my new iMac and upgrading to Marveric, I can not get my older AirPort Express work. Why?

Mavericks does not support the older "b/g" wireless versions of the AirPorts, only the newer "n" wireless versions.
You can use another Mac running Leopard or Snow Leopard, or a PC to administer the older AirPort Express.

My new airport express does not connect my printer to my computer? My old airport did! then I updated to OS 10.9.2. How do I get it connected?

My new airport express does not connect my printer to my computer. The old airport did. I recently updated to OS 10.9.2. I have since bought a new
HP 6700 all in one wireless printer, got the latest Comcast router. None of which connect to my computer wirelessly. Which do I throw away the printer, router, or Mac? Help

Contact HP for support.
Explain that you are using a Mac, anticipate the inevitable groan, and wait patiently for their resident Mac expert to return from vacation.
Until then download and install its driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&dlc=en &lc=en
Otherwise return the printer and purchase one from a company that visibly supports OS X. HP isn't on that list.

Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

Can we print with a non-wifi printer via Airport Express?

Is it possible to print with non-wifi printer via Airport Express?

Read through this previous thread for answers: https://discussions.apple.com/message/21994667#21994667

Print icon on toolbar does not work

Recently bought new computer running W7
Use acrobat to print postage labels on royal mail site
Have latest version of acrobat and when screen comes up showing label to be printed the 'floating' toobar appears but clicking on print icon has no effect
I am forced to used 'CTRL P' and then 'enter'
Occasionaly CTRL P gives me another toolbar at the top of the window which also has a print icon, this does nothing either
Can anyone suggest what is going wrong, should I go back to an earlier acrobat that worked fine on my old XP PC ?
Thanks
Graham

Thank you
Yes you are correct using a PDF in browser to print post labels.
Running Windows 7, Internet explorer 9, Acrobat Reader Version 10.0
CTRL P brings up dialog box OK and I can print from there.
Cannot comment if problem happens outside of browser as it is home
computer and do not have need to view PDF's offline but will find thsi
out if important.
Graham
>--Original Message--
>From: [email protected]
>Date: 23/02/2012 13:18
>To: "flat-pack"<[email protected]>
>Subj: Print icon on toolbar does not work
>HitenderPrakash [http://forums.adobe.com/people/HitenderPrakash
created the discussion
>"Re: Print icon on toolbar does not work"
>To view the discussion, visit: http://forums.adobe.com/message/4224450#4224450

HP printer not printing via Airport Express

I have a HP DeskJet D2330 printer that I am trying to use via Airport Express. The issue is that while the printer is detected in the Airport Utility, and is detected in System Preferences as a Bonjour printer, I can't print to it. Documents sent to the printer appear in the queue and then disappear but no pages come out of the printer.

Hi - similar problem. Mine talked a little (test page would print about ~1 inch then grind to halt). No luck with escalated apple network tech. Problem (apple sez) is with HP. HP is quiet but has list of printers "likely" to work with Airport Extreme , but dated (indicates rendezvous with extreme vice bonjour). FYI, my printer works fine when USB direct to mac. Also Works fine from Mac or PC as ethernet-connected printer on home network (with Linksys/N Giga router) as network printer (also sets up as "bonjour" printer for what that is worth). Also problem exists with imac connected to Airport extreme via wireless or wired. So...problem seems to be pretty specific to talking via airport extreme USB. Havent tried to use ethernet yet, but need the slot for other equip.
Anyone else having any luck?
Also anyone have proven good printer hookup? I need photo quality printer.
mpw

Epson Aculaser CX11NF printing via Airport Express

Well today has been an interesting day...
Connected printer to airport express usb port - had problems printing via this in the past but since I'd moved the printer so I could plug it into the usb port on a computer and then share it that way I thought I'd give it another go.
Macbook 10.5.2 prints perfectly first time
Powerbook 10.4.11 can see it and connect but won't print
Toshiba XP laptop) can't see it
Check out the net, try out the info I find and hey presto! Toshiba XP laptop sees and prints perfectly
Share printer via Markbook and Markintosh and Powerbook prints fine but still won't print directly via airport express.
Feels wrong that an xp book can print via an apple airport express easier than an apple laptop...
Anyone have any thoughts?

Hi,
Thanks for all your replies. I tried repairs pewrmissions in disk utility again and got slightly excited when printer utility automatically selected a generic post script driver but my printer just printed jibberish.
I've just run repair permission in pinter setup repair and this is my log:
The file /System/Library/StartupItems/PrintingServices/PrintingServices is missing!
The file /private/etc/cups/classes.conf is missing. This file is deleted when using the Reset Printing System option.
The file /private/etc/cups/ppds.dat is missing. This file is deleted when using the Reset Printing System option.
The permissions for the file /usr/libexec/cups/filter/rastertodymo are incorrect!
They are lrwxr-xr-x, but should be -rwxr-xr-x
Repaired.
Recreating symbolic links...
Done.
Verification complete.
2075 files examined. 1 problem was found and repaired. It is recommended that you verify the permissions again to make sure the values are correct.
3 missing files/directories found during the verification process. They may be responsible for certain printing problems. Printer Setup Repair cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
Does it mean anything to anyone?

Airport Express does not connect to the DSL Ethernet

I have had an Airport Express (AE) for several years working with no issues. I bought the newest version a month ago and have been trying since to get it to work. I can not get it to recognize the ethernet cable being plugged in when I try the "replace existing device" set up, I can not get it set up when I try "set up a new network. It does not work when I try to use it as a range extender. I tried many things, went to the apple genius bar three times, they gave me a new one. Same thing. I did factory settings resets, etc. I canged channels. Nothing works. Any ideas what else can be wrong?

What version of AX do you have? And what setting do you have it configured for (such as Create a Wireless Network)?

HP Officejet Pro L7590 Printer - HP Solution Center does not work

I am not able to get the Solution Center suite to work because the installation has an error. I am using Windows 7 Home Premium. The printer I am installing is the HP Officejet Pro L7590.
If I go to Devices and Printers and add the printer. The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine.
However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work.
The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
Because of the failed installation using HP software the HP solution center does not work.
In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found. In addition, I could not remove the printer. Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer. This leads me to believe HP has a faulty software bug that is causing the error.
I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in. If I remove the usb and reinsert it, the Windows would just show the failed driver. I repeat, it failed after I install the software, it works fine without. The primary reason I want the software is to use the scanning feature.

Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having software installation issues. i would like to try and assist you.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Regular expression does not work in IE

Hi,
I'm having a regular expression which should check the content of an inputText field: it should contain a number, a character and the size should be at least 6. It's working when I test it in FireFox but it always fails to succeed in IE:
          <af:inputText>
            <af:validateRegExp pattern="^(?=.*[a-zA-Z])(?=.*[0-9])[a-zA-Z0-9]{6,24}$"
                               noMatchMessageDetail="Does not match."/>
          </af:inputText>How comes it does not work in IE (6.0)?
JDeveloper 10.1.3.3
Thanks in advance,
Koen Verhulst

hi Koen
The web page you refer to ...
http://www.fileformat.info/tool/regex.htm
... seems to be doing server side Java regular expressions (and as such will behave the same in both FF and IE).
The af:validateRegExp component you want to use does client side evaluation of the regular expression, using scripting, hence the apparent difference between FF and IE.
There is also this web page ...
http://www.regular-expressions.info/javascriptexample.html
... that seems to behave similar to the markup and scripting resulting from the af:validateRegExp component.
Besides the value "2abcdef" there seem to be others that are accepted by IE for the regular expression "^(?=.*[a-zA-Z])(?=.*[0-9])[a-zA-Z0-9]{6,24}$", values like these:
"a2abcdef", "a2abcde", "abcdef2abcde", "2a3cdef", "2a34567"
Although these values are not accepted by IE (but are accepted in FF):
"2abcde", "23bcdef"
success
Jan

Airport express does not appear in Airport Utility

Hello,
I am having problems connecting my Airport Express to my network.
My configuration is all Apple. I am attempting to set up Airtunes. I have an Airport Extreme (software version 5.7) plus Airport Express. The Airport Extreme is hardwired to my Power Mac G5 (10.5.6) via ethernet. Wireless security is WEP 128 bit.
The Airport Express appears to establish a connection with no problems. The indicator light on the Express goes through normal start up and then a steady solid green.
Airport Utility shows the Airport Extreme but the Airport Express is not listed.
Any suggestions on how to make the connection are appreciated!
Thank you!

When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the AirPort Utility after each step:
o Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
o Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
o Perform a "factory default" (AirPort Express) or "hard" (AirPort Extreme / Time Capsule) reset.

Printing the document grid does not work

Hi,
I got here a lot of master documents. The design is built with a squre document grid. I need to print or export it as PDF. But activating the checkbox does not work. Is it possible to print it? Ruler guides and the base grid are working. But I need to print the document grid.
Is there any possiblility to to this?
Thanks
DerSiedler

Printing the document grid is not an option, but you might be able to work around it by creating your own grid using Layout > Create Guides... then printing the visible guides.
I'd do that on a separate layer. If you want the grid, but not other guide, make a real grid with colored strokes using step and repeat, again on a separate layer.

Printing via Airport Express does not Work

Similar Messages

Maybe you are looking for