Printing via airport extreme then via ethernet to Hp Deskjet 6840

Hi,
Thanks for any help in advance.
I have a powerbook and can't print to my ethernet printer. If I plug in the ethernet cable to the powerbook it prints fine.
Is it possible to print to a networked printer via airport.
I cannot connect the HP to the USB on the side of the airport as that would cut off the other hard wired macs on the network.
Any ideas?
Cheers
G3 powerbook pismo 400 Mac OS X (10.4.5)

I've been using my 6980 wirelessly through my Airport Extreme router. It works very well even when multiple users are accessing. I don't have any of my machines hardwired though. It shouldn't matter, if your laptop can talk to the hardwired machines the printer should too.
Grab the 6840 setup guide and your software CD and follow the instructions for setting up wireless. Since the 6840 predates Tiger you may need updated drivers, but if you can print to it now you're probably OK.
If you have WEP activated, your network hidden, or both, the setup process is a little complicated. Let me know if that's the case and I can help you through it. I have a closed network with 128 bit WEP and got everything connected with few problems (took a little finagling).
If you don't have your setup guide handy you can go here for information:
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?lc=en&cc=us&dlc=en&produc t=385458&lang=en&rule=52765

Similar Messages

No Internet via Airport Extreme and Speedtouch Ethernet DSL modem

I've recently purchased a McBook pro and wanted to create a wireless network. I have a new Airport Extreme Base Station and have successfully set that up, but with no internet connection!
I can get a perfect connection by hardwiring either of my machines to the DSL Modem directly (via Ethernet cable), but when i connect the Airport Extreme to the DSL Modem via ethernet there is no internet.
After a bit of research i'm wondering if there is a "bridge" issue... though i have no idea what that means or how to resolve it. Can anyone help?
Details:
Airport Extreme 802.11n
Speedtouch DSL Modem (Thomson ST510 v6)
G5 Power PC Tower (10.4.11) will connect to the Airport Extreme via ethernet, currently connects to the DSL modem via ethernet.
MacBook Pro (10.6.4) will connect wirelessly. can currently connect to the internet through the DSL modem via ethernet.
Dynamic IP via ISP connection via PPPoa

Hi Steven, I know this question has been answered and is a couple of months old but I think you may be able to help with my set up? I have a Thomson speedtouch 510 v6 modem router provided by Karoo (UK). My other Belkin N modem router has just bust [again] so the Speedtouch is my old faithful backup device. Now, i've never been able to get on ichat with the Belkin as its a mimo n speed and this is apparently not compatible; So i'm now on ethernet with the st510 and have just set up ports for ichat thanks to a thread called http://discussions.apple.com/thread.jspa?messageID=2719419&#2719419.
What I want to know from you (because I really need a wireless router to get me off this ethernet support system and back on airport) is how you're getting on with the st510 / airport extreme combo now and can you use ichat on it? If so does your connection doctor say full cone in network settings or something else? As I say, I really want to use ichat and have never been able to in 3 years of owning my Macbook Pro. Hope to hear back from you Steven. Regards Steph

Printing problems with HP 1012 connected via Airport Extreme - resolved?

I originally posted on this issue in a long-running discussion on HP printer issues.
http://discussions.apple.com/message.jspa?messageID=10109788#10109788
Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
a. I turned off AP on the iMac.
b. I unplugged the AE base station for one minute+, then re-powered it.
c. I opened my MBP with 10.5.7. Started up Airport Utility.
d. I renamed the base station. Left all other settings alone.
e. I installed the 7.4.2 firmware upgrade.
f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
g. I turned on AP on the iMac.
Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
Too early to tell if I will have any further problems if if it permanently fixed.
Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
Stan

I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
How to:
Turn printer on.
open System pref/ printer-fax/ add printer
Select hp desktop 5100
(name: -- Change name if you want - I kept " hp deskjet 5100"
Location: Your computer
Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
Select OK

Cannot print from IMac or Dell Latitude Laptop on Canon MX330 printer via Airport Extreme.

Trying to connect a Canon MX330 printer to an IMac and Dell Latitude laptop via Airport extreme and having no luck.
All devices recognize the printer, but when I try to print from the IMac it says that the printer is offline, even though it is not. The printer status on the IMac says offline until I clear the printer queue and then the status goes online.
When I try to print from the Dell laptop the printer reacts, but nothing prints.
I have run through all of the troubleshooting in the support section online. Any advice?

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

How can I print from ipad2 via airport extreme to hp printer on USB.

Is there a way to get iPad2 to print via airport extreme to a non wireless hp printer?

Apple - iPad - Print right from your iPad with AirPrint.
Unfortunately, AirPrint will only work with AirPrint enabled HP printers.
Check the HP site. They may have an app available you can use for your USB / Airport printer.

My iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, although it will print if connected via USB. Meanwhile, my MacBook (OS 10.5.8) prints still prints wirelessly. Please help.

May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.
Any suggestions?

EPSON Stylus CX4800 All-in-One Printer
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58606&prodoid=56291 067&infoType=Downloads&platform=Macintosh

Win XP does not print via Canon MP970 via Airport Extreme

OK, I bought a Canon MP970 printer and hooked it up to the airport extreme, changed all of the ports to 10.0.1.1 on my XP, shared the printer, ran Bonjour, ran airport utility, and everything I know how to do. I can print from my Powerbook G4 and from a new black macbook that I just bought on my network. Problem is I cannot print from my windows XP PC. Very frustrating. It did work fine with my HP printer; that is print from my laptops AND my PC desktop via airport extreme. Any help would be greatly appreciated!

OK, I kept working at it and seemed to have fixed the problem. I finally just redirected the port to a local one "9101"and not the 10.0.1.1 and began working. I am not sure what I did definitively to make it work. And I just installed the latest printer drivers into my PB G4 and new blackbook and worked. I really just need to trash the PC and go with Apple but you know.......wife.....$$$$$, etc....

I want to connect a Windows PC to an existing Airport Extreme router via ethernet connection. Is there any utility required or can I just plug into the router?

I want to connect a Windows PC to an existing Airport Extreme router via ethernet connection. Is there any utility required or can I just plug into the router? The router is already set up and working with existing iMacs.

thanks for the info. I found apple utilty software on this windows 7 PC but I guess it is not required for sharing internet on exisiting apple extreme. Am I correct that I can remove this apple software?

Extend Airport Extreme Network via Ethernet to Airport Express

I am trying to extend a gen 4 Airport Extreme by hardwiring ethernet to a 2nd gen Airport Express and will add a second Airport Express if I can get the first one to work. I have a large network with a 24 port switch and aiport utility 6.3.2 (most recent as of this date)
First question:
When expanding my network using the hardwired Airport Express can I name the new network anything I want or should it be exactly the same as the Extreme Network. I would prefer to name it differently so I can keep track of which network my devices are acturally joining but I will be happy simply to get this to work either way.
Second question:
After repeated attempts to configure my hardwired Aiport Extreme, I get the following yellow status error:
Yellow Internet Connetion
Yellow No DNS Servers
Yellow Conflicting DHCP Range
Observation:
Many of the suggestions here and the link posted in a previous post are not based upon the most recent Airport Untility software so that may contribute to my lack of success so far. I am using the most recent version.

Even though the express was hardwired to the extreme during the set up process it was choosing to "extend" the 5 ghz network which I have activated on my extreme. I assume this is okay. It seems to be. It offered me no other option during the set up.
Both 2.4 GHz and 5 GHz bands will be extended if the extending device supports dual bands.
I configured the express by plugging it directly into the LAN port of the Extreme. Once configure, I plugged the express into my 24 port switch. It worked.
That's a good way to do things. If the Express works when connected directly to the Extreme, and doesn't when you connect it elsewhere on the network, then you know that you have a wiring or switch issue somewhere.
I choose to keep the express network name and base station name the same as those on the extreme. They worked. Since I really want to keep track of which network I am logged into, I later changed both the network name and the base station name for the express and it seems to all work under the new names.
Either will work, as long as you don't mind logging on and off of networks to switch. Most users prefer to have one "big" network. Then, they can walk a laptop from one area to another, stay on the same network and the Mac will automatically switch to pick up the strongest signal from the closest access point.
I activated the 5 ghz on the newly configured and newly named express. It seems to work.
As it should.
While configuing the express I got the error message metioned above a couple times. I kept trying the same procdure with out changeing anything and eventually it worked.
I can't duplicate that issue, but glad that things worked after a few tries.
Since my AppleTV on the second floor has difficulties connecting with the extreme, I am thinking of plugging it in to the express directly. How do you feel about this? WOuld I be better off running another separate ethernet wire off the switch?
Always the best plan to connect any network devices using Ethernet if you can. The best networks are the ones with an Ethernet "backbone". You can connect the Apple TV to the Express or the switch, whichever is easier. Personally, I prefer to connect devices to a switch if possible just to keep things simpler and make any troubleshooting easier.
This whole system with an extreme, 3 expresses, 3 appletvs, 12-14 cameras, a 24 port switch and up to 50 devices on the network at one time (computers, phones, ipads, etc, etc) works reasonably well considering the demands I put on it.
That's quite a home network. Glad that things are working. I am sure that you notice better wireless performance now with the two AirPort Express devices wired into the Ethernet backbone.
If we could get more users to set up their networks this way, most of the complaints that we get about slow wireless, intermittent connections, etc would go away.
It's not easy to run the Ethernet cable for some users, but I have yet to hear from the first user who ever regretted doing it.

Internet connection via Airport Extreme/router thats not working, why?

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

Weird lost access to iMac's desktop via Airport Extreme wireless LAN

This is weird and complicated. I'll try to keep it simple.
1. Two computers on a wireless LAN via Airport Extreme: G4 Powerbook and 20" G5 iMac. The LAN has worked flawlessly and seamlessly for several years, and except for this ONE anomaly, still does.
2. When logged-in to the iMac from the Powerbook, all its files and contents show up normally in it's networked-drive window in Finder,
3. EXCEPT the desktop. And I mean the real desktop which is under my ID under USERS.
4. Searching the Powerbook from the iMac, however, works just fine and shows all of the Powerbook's contents.
Repairs of Permissions on both computers have accomplished nothing.
There is one other peculiar symptom: there was a .wmv movie file sent me by a friend, and I had a copy of it on the desktops of both computers. It sat there, showed up and ran just fine, until one day something curious happened:
The file would show up in the column-view Finder window of the iMac's desktop when I opened it from the Finder Window, but would, after about a second, disappear!
If I try to import, on the Powerbook, some random file into the iMac's Desktop folder, it appears for a brief second and then the folder once again displays as empty.
I have trashed that wmv file, and yet sometimes its name blinks up on the iMac's desktop list (that is, again, the column view display in the Finder window).
This is profoundly weird.
Oh, and there's nothing changed or weird about the SHARING settings. Personal File Sharing is enabled on both computers, as is Printer Sharing, and itunes music sharing is also enabled. All of these continue to work just fine. Firewall is enabled, but always has been.
Owen

Well, when in doubt try all the obvious things FIRST!
I rank Disk Utility from the install disk, did a disk repair, and, well, Bob's your uncle, and all is fine again. Apparently that ghost file screwed up the count of files (I'm not sure what that means, but it seems consistent with a file that would materialize and then disappear, and screw up display of a folder's contents - the folder it was lurking-in invisibly.
Very peculiar, none the less.
Owen
I'll leave this open for another day, if only to see if someone has an explanation for what may have happened, since that might be useful to others, besides satisfying my own curiosity.

Migrate from minimac (G4) to new iMac via airport extreme

I have a brand new iMac and I have the latest airport extreme.
I have my old miniMac and all are linked up through the Airport Extreme.
I want to transfer all of my old files from my G4 miniMac to my new iMac but the Migration Assistant says I have to use (buy) a firewire cable.
How do I transfer my files from my old computer (miniMac) to the new iMac via airport extreme?

sorry to say but its the firewire technique which Migration Asst. uses. It does not migrate over Ethernet.. its actually very simple...
you put your G4 into target disk mode. You put the iMac into migration asst., attach the cable and the migration (file copying) begins after you chose to proceed.
The reality is firewire is faster than most standard ethernet anyway... and wireless? it would take an extraordinary amount of time.
Will
Message was edited by: Willard Kramer

File transfer speed in Shared USB Hard Drive via Airport Extreme

I' am planing to buy one of this, but first I need to know what kind of file transfer speed I can expect when sharing USB drive via Airport Extreme 1000Mbps Ethernet.
Thanks.
Message was edited by: Robert81

most likely 14m/sec but normally 10.5 this is ethernet wired and usb attached. wireless would be about 8M/sec
Wired is good enough I use it for Finder copy frequently.

2 Computers Cannot Access Internet Via Airport Extreme at the same time!

I recently purchased two new computers -- a Macbook Pro (for myself) and a Macbook (for my wife). My Macbook Pro arrived first, and connected to the wireless network via Airport Extreme with no problem. Once my wife's computer arrived, and we would connect to the network with her computer, every time she accesses the network it basically "boots" my computer from the network. It still says I'm "connected" to it, but no programs/browsers/etc. that use the internet will actually work and it behaves as though there is no network connected at all. In the mean time, her Macbook continues to operate as normal and never seems to get "booted" by my Macbook Pro. Is the network thinking our two computers are the same computer? Or, what is the problem? PLEASE HELP!

I have had the same problem with my iMac and MacBook, both on leopard and with a new AEBS. With the additional symptom that internet connection will drop on either machine individually, with the other powered off. I also tried a Time Capsule, with exactly the same results. But I have observed what is described here. Internet connection is fine on one machine, then drops and I find the other machine working for awhile, until it drops. Just ping-ponging back and forth.
Since I am seeing the same problem in two new Macs with an AEBS and TC, it's hard to say that there a problem specifically with any one of them. I suspect that my problem is interference, or electrical noise when using 802.11n. The only thing that worked for me is "802.11b/g compatible" mode.
In another post, it was suggested that the AEBS was interacting with Digital cable TV/internet, potentially causing an electrical noise issue. What kind of service to you have?

Custom icon on a disk shared via Airport Extreme

I have a USB hard drive that I am sharing via an airport extreme. In the finder, under "Shared" I see my airport extreme. When I click on that, I see my external drive. I would like to change the icon for that, but the standard Get Info -> paste doesn't seem to work.
I've tried to set a custom icon on a test folder on my hard drive and it works. I also tried it on a test folder on the USB drive shared via airport extreme, and that worked. But I can't set the icon for the drive itself. Any suggestions?

No, they pulled it, even though Steve promised the wireless backup feature in his latest keynote. One hour into it to be exact.
http://events.apple.com.edgesuite.net/d7625zs/event/
Now, I am very much against releasing a product before its ready, so I respect them for that. However Steve VERY clearly states that it was already working and would release with Leopard. He usually makes a very very clear distinction between things they "can/might" do and things that are working. He even goes into detail about how all the house macs can wirelessly use the same backup through the Airport Express. THEY EVEN HAVE A PICTURE of it!
So they need more time, okay. But I feel lied to. The least they could do is make a press release with an ETA! The hush hush, makes it seem like they are going to scrap it and pretend it never happened.

Printing via airport extreme then via ethernet to Hp Deskjet 6840

Similar Messages

Maybe you are looking for