Printing was bad, contact info needed for reprinting

I just ordered two iPhoto books, normally I never have a problem, but this time the black and white photos were entirely washed out, but the color photos were good.
This is the third time I've ordered the SAME book, the first two runs were perfect, but this one is totally unacceptable. My question is: who do I contact about reprinting? They don't make it easy by giving any phone numbers anywhere for customer service. I need these books right away!

Hello,
follow site:
http://bugreport.apple.com
log in, open your previous opened task (with battery problem) and on end of site is choice to attach - best is zip file - to send ingeneers of apple.
Ephendi

Similar Messages

About the idoc(DEBMAS) inbound, contact info, need help!

Hi everyone,
we have SAP and SIEBEL system, and crate/update customer info(or say account) at SIEBEL first, then send account info to SAP via IDOC, message type is DEBMAS06.
Now there is a bug. create/update contact info at siebel, it always create new contact at SAP when inbound to SAP system.
Is there anyone can give me any advice about how to fix this bug?
Thanks & best regards.

Hi Sir,
First thanks very much for your reply.
I known the MSGFN field, segment E1KNVKM(contact info) has MSGFN field too. but there is a still some issues. I found you must pass the PARNR field to SAP if want to update info(If not, even I set the MSGFN as Deleted or UPDATE, it not works). PARNR is the only key for table KNVK. but you know, PARNR is created at SAP when create this contact info, I need create/update contact at SIEBEL, that's not easy to know what's the value of PARNR will be created.
Is that possible too pass PARNR value to SAP? I know a little about the SAP BASIS Setting.
Thanks again.

Info needed for Lexmark printer App

I need the following for my Lexmark Printer Application to be able to print from my samsung note 4 cellphone to my wireless lexmark printer: (1) The server address, (2) IP address, and (3) Host Name. thanks

Hi,
I replaced my Z10 with a new one. I used the Blackberry link to restore the data to my new device. I configured the mails and applications i normally use.
However i started getting notification in the BB hub for Twitly and some other apps that I cannot guess as only user ID was mentioned in the prompt.
I had stopped using Twitly about 6 months ago and there fore it should not have been in the backup i made last (the one i sued during restore).
Please help.

HT2486 can I print out the contact info for all contacts in my address book?

I haven't found anything on support to determine if I can just take a group with 10 contacts from my address book and print it out like a CSV file or just a plank page.
Any suggestions if this can be done?
Thanks in advance,
Clay Anderson

To print out a group, select the group name of the contacts or select them holding down the Command key and clicking on each name. Then Addressbook > File > Print > click the Show details button > select the items below in the dialog box > select the fields to print > print or print to PDF.
Regards,
Captfred

POWER SUPPLY info needed for GRAPHICS CARD UPGRADE!!!

I have a HP PAVILION p6631p and ide like to add a graphics card, but I was told I had to upgrade my power supply.
The card I purchased is the SAPPHIRE RADEON R7 260X 2GB and I was told I need a 500watt or higher power supply.
I was looking at the CORSAIR BRAND power supplies and tried emailing them to help me find the right power supply, but they said they needed to know what type of power supplies HP use in this model PC.
I didnt know what to do so im hoping someone can help me out with this information CORSAIR is asking for so they can help select me the right power supply for my PC.
I been searching for answers for weeks. Hopefully someone can help. Thanks.
This question was solved.
View Solution.

KJonline, welcome to the forum.
You were told correctly. You will have to upgrade the power supply unit (PSU) for the video card to work properly.
The PSU in the computer is a standard ATX. I suggest measuring the existing PSU and comparing the measurements to the one you choose.
I normally suggest at least 500W, but 600W is better for future upgrades. Here is a PSU that should work for you. It is 650W and is an Enthusiast series. This means that it has all of the power that you will need. It is 5.9" (W) x 3.4" (H) x 6.3" (L).
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Info needed for G-Celerator GCD-1250-S4

I got a used Dual-CPU accelerator labeled in the bottom as a "G-Celerator GCD-1250-S4" [for free!]. No manuals, no CD. Apple/Discussions or Google don't help. Can anybody lead me to more info? Compatibility, jumper-setup, drivers etc. ?

Hi
It's possible it's a GigaDesigns CPU upgrade judging from the name:
http://www.gigadesigns.com/index.asp?PageAction=Custom&ID=6
I'd hazzard a guess they're dual 1.25GHz G4s. Earlier upgrades were specific to certain G4 models depending on the bus speed (series 100 - Sawtooth/Gigabit Ethernet, series 133 - Digital Audio/Quicksilver), whilst later upgrades could auto sense the bus speed and were compatible with Sawtooth thru Quicksilvers.
If it's 7447 based rather than 7455 based you'd need to apply a firmware update so the boot ROM will recognise that particular G4 variant.
I guess you could always try sending them an email to try and get some additional information.

HT4489 How do I print my iCloud contacts on labels for my wedding?

I'm having troubles printing my contacts on lables or at all that I have created as a group for my wedding. When I choose file>print nothing happens. Help! It says something about creating an On My Mac Group, I don't understand what that is. Can someone explain that to me in detail please?

Are you trying to print from your MacBook Pro? The contacts should be in you Contacts application if you have Contacts setup to be synced thru iCloud. How are you going about trying to print the labels and from what appliclaltion?
OT

Info needed for sample online SAP XI certication test

Hello folks,
I need to know websites which are providing free/paid sample online test for SAP XI certification.
regards
Praba

Hi
XI Certification details
chk this
TIA
Vishy

INFO NEEDED for syncing iPhone

SO I recently got myself all mac'ed out this past week. Had the iPhone but picked up an iMac and iPad. Finally got all my contacts calendar and notes all sync'ed. Very happy. Now I have been updated my music library on my iMac so it will become my primary music library. My phone is sync'ed with another computers library. The message I received before confirming my "manage music manually" is. "Your phone is synced with another itunes library. Do you want to erase this iPhone and sync with this itunes library.: Now does that mean everything including my music will be erased?? I dont mind if the music is gone because I have transfered all the files to the new mac. Just worried about the contacts, calander and notes.
Thanks in advance
Side note: Is there anyway to back up all notes to an external hard drive or somehow make "Notes" its own application?? I use this feature all the time on the phone and would love to keep this super secure.
Cheers

What that message means is this: By design, the iphone will sync or manually manage itunes content with ONE computer at a time. Any attempt to sync or manually manage itunes content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature of the iphone & cannot be overridden. As long as you copy ALL of your itunes content to your new computer, you'll be fine, since you'll be simply replacing what is erased with the identical content.
Before you sync to your new computer though, make sure you have at least one entry in Address Book & iCal. Do the same with notes. This will insure you receive a merge or replace prompt when you do sync. Select merge.

JAVA FX 2.0, runtime environment info needed for Dolphin 6000 (OS win 6.5)

786
Hello everybody,
I am totally new at JavaFX.
Can you please guide me how to install the run time on one of the Mobile devices - Dolphin 6000.
Through JavaME, Created 1 mobile application, deploying the project, 2 Files .JAR , .JAD have been copied.
Get the following message:
There is no application associated with Application1, Run the application first, then open this file from within the application.
Thanks in advance for help.
Regards
Ali
Edited by: 918213 on Mar 1, 2012 10:59 AM

But is there any Java runtime for windows 6.5 Mobile, supportive for Java MEJava ME is a Java runtime.
Perhaps you mean "is there any JavaFX runtime for windows 6.5 Mobile, supportive for Java ME"?
In that case, you could try to dig up a version of JavaFX 1.x which can be deployed on Windows Mobile.
Perhaps one of these (http://www.oracle.com/technetwork/java/javasebusiness/downloads/java-archive-downloads-javafx-419431.html#javafx_sdk-1.3.1-oth-JPR) will allow you to develop JavaFX 1.x applications to run on JavaME targeted to Windows Mobile - but I don't really know. Also note that JavaFX 1.x is effectively dead, incompatible, unsupported technology at this stage, especially in a mobile context. See the End of Life announcement for JavaFX 1.x https://blogs.oracle.com/javafx/entry/javafx_1_2_and_javafx
If you use JavaFX 1.3.x you may also want to use a NetBeans release which supports it: http://netbeans.org/community/releases/69/

Dead Space, Battlefield Bad Company 2, Need for Speed Hot Pursuit and Shift FREE

Hey guys, just wanted to share 4 free games (as of now) for us Verizon Xperia Play users. Because Verizon sucks, we have to go to EA's website on our phones and download them from there.
Here is the link to the forum I found this on:
http://forum.xda-developers.com/showthread.php?t=1283513&page=3

lysdexic wrote:
hang on hwere on the website do we go to?
Taken straight from the link:
• NFS Hot Pursuit: http://vip.accumulate.se/gstore/eaoe...?s=31&tid=2505
• NFS Shift HD: http://vip.accumulate.se/gstore/eaoe...?s=31&tid=2504
• Dead Space: http://vip.accumulate.se/gstore/eaoe...?s=31&tid=2503
• Battlefield BC2: http://vip.accumulate.se/gstore/eaoe...?s=31&tid=2502
Go to these links in the web browser of your Xperia Play
Note: If you have Chome to Phone (app) installed in your Chrome Browser on your computer and phone, you can just right click these links and hit "Chrome to Phone" on you computer. This will send the link to your phone. Just open your web browser and it loads automatically.

Info need for CS

Hi,
Where should I post regarding Customer Science (CS) Questions and quires?
Rds,
Suresh

Hi,
Pls checck this thread:
SAP CS
Eddy

Help needed for THE decision

Hi everyone ☺
I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
So, here’s what I came up with:
a) getting logic pro studio 8 and apogee duet
b) getting pro tools m-powered and mbox 2
c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
Now, the questions are:
if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
Neptune

Thank you Bee Jay and Pancenter for the lighting-fast and useful answers
now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience?

On those site asking for your name, address, city, email address, this program would put that info where required. All one had to do was type the first letter or number of the info needed. Is this a Firefox program?

The program would enter info for me. I only had to type the first letter or number of the info needed. For example, my first name is OSCAR. So, to enter this info in the box marked "First name", I only had to type in the box the letter "O". The program would then type OSCAR. I would then click on the name "OSCAR" and the name OSCAR would be entered in the box asking for my first name. Same with "city", "zip code", "last name", "email address", etc. Is this a Firefox feature??

That feature would be provided by an add-on for Firefox. The most popular add-on of that type was the Google Toolbar for Firefox, which has been discontinued by Google for Firefox 5 and future versions. <br />
http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
There are a number of different '''"auto fill"''' add-ons that are available from other developers. Look at this search for one that meets your needs. <br />
https://addons.mozilla.org/en-US/firefox/search/?q=auto+fill&cat=all&x=0&y=0

Conflicting info on which version needed for G4

First, thanks to all the frequent posters here. I'm very impressed by the knowledge in this forums. I've learned a lot, but still haven't found my solution.
I ordered a processor upgrade for the G4 (Sawtooth). The instructions say to first update the firmware to 4.2.8, if necessary. I'm supposed to check the current version by using Apple System Profiler after booting into OS9. I bought this 'puter used, with 10.2.8 installed, and no OS9 installed. I've never used OS9.
I did get a gray "PowerMac G4 Software Install SSW version 9.0" CD with the purchase. When I tried to boot from that, I get a welcome screen, and when the progress bar gets to about 15%, the process simply stops. (The CD drive has been replaced with a DVD RW, if that might matter.) Now, an Apple article (120068) regarding the firmware upgrade says to use 9.1. But, I just want to boot into 9 to check the current firmware version, not update it (yet). From what I've read here, I thought this machine should be bootable by 9.0. I even ran across an Apple table somewhere here stating the multiple versions of 9 that were permissible for this G4, including 9.0. (I almost suspect that the update has already been done by the previous owner, as he was a savvy user, and did A/V production with it. It's also been working under Tiger flawlessly.)
I also tried dragging a copy of the 9.0 system folder onto my secondary HD, which shows to have the OS9 drivers installed. This was bad news trying to boot this way. A message said it could only boot from the original media (the CD, no?), and it got locked into a loop. Got out by booting with Option pressed, thanks to a tip read here
So, is there another way to check the firmware rev without obtaining 9.1? I visited a site recommended in here for system CDs and found a retail 9.1 offered, but for $160 (yikes!). I really have no need to use 9 in the future, having no software for it, I just need to boot it to check the firmware rev.
Suggestions? Thanks for your time!!!

Hi, rotordude -
There is a way to check the firmware version (Boot ROM version) without having to trust the accuracy of the software in OSX or OS 9.
Boot the machine into Open Firmware - restart; immediately press the Command-Option-O-F keys, keep that combo held down. The machine will quickly boot into Open Firmware, which is coded on the logic board, not on any disk.
You will be presented with a text-based screen. On the second line will be this string -
Apple PowerMac3,1 #.#.#f# Boot ROM
The "PowerMacc3,1" portion will identify it as being a G4 (AGP), aka "Sawtooth", model.
The "#.#.#f# Boot ROM" will have numbers replacing the "#" character - this shows the current firmware version.
For example, on that line in Open Firmware my G4 (AGP) displays
Apple PowerMac3,1 4.1.8f5 Boot ROM
indicating the firmware version is 4.1.8, which I know to be correct - I have applied the 4.1.8 firmaware update (now no longer available), but not yet the 4.2.8 firmware update (I do not have OSX 10.2 or later on this machine).
To get out of Open firmware, enter exit at the prompt and press Return; or enter boot at the prompt and press Return; or use the force restart button on the front of the Mac (the small raised-face button under the power button, the left-hand one of the two small buttons).
It has been reported by some users that once the firmware on their machine was updated, it would no longer boot to the original OS (non-OSX) version that shipped with the machine. Based upon comments, though, this does not appear to be a universal result of updating firmware.
Take a close look at the "PowerMac G4 Software Install SSW version 9.0" CD that you got with the machine. What is the part number shown in small print on the right-hand side of the label? The diskl that came with my G4 (AGP) shows this info at that location -
SSW version 9.0.4
691-2657-A
- and the CD is titled in large print "PowerMac G4" with a sub-titled "Software Install".

Printing was bad, contact info needed for reprinting

Similar Messages

Maybe you are looking for