Printing week view omits times

When you print the week view of an iCal calendar, it does not print the start and end times of the events -- it only prints the names of the events. Maybe it's just me, but doesn't this make the printed week view nearly useless? I need to know precisely what times these events start and end, not just a rough idea. At the very least, it should show the start time, as it does in the non-printed week view. I can't see any options to change this behavior -- anyone else know how?

Greetings,
The calendar will always have all 24 hours on it. What you can do is set the number of hours you want in the day, in preferences, which will scale the hours for you, then slide the screen to show the hours that you want, and then quit iCal. Restart it, and it should come up with the same view that you left with. This way it looks like just the hours you selected.

Similar Messages

How do I print weekly view with times?

I'd like to have the time listed by each event when I print a calendar in weekly view. Right now the times are along the left side of the page only. Any ideas?

Hi mosswood 17
Welcome to the Community
If you already have your backup there are many free software available who can read ,extract any ipd file like :
MagicBerry from Mena step or ABC Amber BlackBerry Converter and many more.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Show times in printed week view

Hey everyone!
I am a student at a universty in Belgium, Europe and I always print my weekly schedules with iCal. For I always print my schedule in a 5-days week view, the printed schedule doesn't show any start nor end times. But since my lessons start and end at rather odd times (like 10.25AM or 12.35PM), it's rather hard to deduct these exact times from the printed sheet. So I always print my schedule twice; once in list view for the exact times, and once in week view for a better view on the gaps between my lessons, which is rather unpractical.
Is there any way to show the start and end times in week view when I print it?
Greets and thanks in advance,
Gert Milis.

Never use "Timezone support"; Settings/MailContactsCalendars/Calendars.
When the settings are correct in the event, and not corresponding in the display:
Do a "reset": hold the Power Button and the Home Button at the same time, keep holding, when you see the white apple logo appear, let go and let the 5s start.

ICal Printing - "Week" View

Running
Mac OS X Lion 10.7.5
2008 MacBook
Trying to print from iCal: File -> Print.
My "Day", "Month", and "List" views all preview and print correctly.
The issue is with my "Week" view. For whatever reason, it doesn't cooperate.
I've included screenshots for more information.
Please advise.
Jay

i know exactly what you're talking about. I've been having the same exact issues you've listed, plus more. my repeating appointments (my semesters worth of classes) shift an hour back or forwards, but only after certain dates. its a whole bunch of weird stuff and it also only happened after Snow Leopard. i also sync via mobile me to my iphone, and the incorrect times push onto my iphone. anyone heard of this or solutions?

Print month view without time of day

I am using iCal to manage project due dates in our office. I am able to turn off the hours/minutes when in screen mode, but each time I print the month view of the calendar the times print too. Is it possible to NOT print the time?
Thank you.

musetta24,
Sorry to see that no one replied to your post back in October.
Normally when I notice that someone posted for the first time in Apple Discussions, I open my reply with - "Welcome to Apple Discussions." With my apologies for the lack of responses, please accept a belated welcome and reply to your question.
Widowwmaker,
iCal will not print without displaying the times.
If you are willing to use the Preview application, you could take a screen shot of your preferred iCal window, and print using the Preview print menu.
;~)

Highlight column in weekly view - Working time

All,
I have a requirement, I need to highlight the columns sunday and saturday to a different color in the weekly view of record working time iView .Could anybody please tell how can this be accomplished
John

Hi Chris
Thanks for your blog, as always. I had the exact same requirement and disaapointed that ctrl+right click did not had an option and was wondering if I have to do a NWDI customization for this simple change. It was an excellent blog and solved my issue.
If you rember, I was there at CF!!
Thanks John, for intiiating the question that made Chris to write the blog..
Thanks, Raj

Printing appointment times in week view?

I would like to print my appointment times when printing in week view, but can't find a way to do it. Possible?

Hmm, suddenly they locations have appeared again on my latest attempt to print them out. Not sure what that was all about, but whatever it was is now sorted.
Cheers anyway!

ICal Week view, Date is not aligned with the Time(schedule) of each date

Well, just like it says over there (`` ). I've recently been to China for a business trip, and I suppose the different time zone may have had something to do with the problem. Now I'm back home, changed the time zone back to normal, still the iCal shows in the weekly view that the Date on the above is not aligning with the Time and schedule. Any suggetions would be grateful!!!

Hi,
i omit the scheduling maergin key in material master,
the result of MRP is
BASIC DATES
Finish 15.10.2009
Start 14.10.2009
PRODUCTION DATES
15.02.2010 14:33:25
14.10.2009 07:00:00
scheduling type i planned order is still "backwards"
so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
this seem not right.
it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
Best regards,
Freddy Ha
Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

Print ical weekly view with fewer hours

When I print iCal in a weekly view, It prints 24 hours. Obviously that isn't necessary. How can I get it to print only 12 hours or the hours I have on my schedule?

I was able to figure it out. Apparently I had the times in wrong for an event and it went from pm one day to am the next day, hence prining 24hr. When I corrected this is solved my problem. Thanks for your patience.

ICal print in weekly view doesn't begin from monday but tuesday

Hello,
I faced a problem while trying to print a weekly view of my calendars. Even though I have adjusted the calendar in the setting so that the week starts from monday, every time I try to print a weekly view of my calendars, the weekly view is is alway for the dates Tuesday - Monday, NOT Monday - Sunday. I tried choosing in the printing view that the printing would start from the date 27th of october (monday), but instead, the first date on output was always Tuesday (28th). The same happened when i chose that area printed starts from next week - it starts it again from Tuesday not Monday.
Any help for this?

epee91,
What setting do you have in System Preferences...>Language & Region>First day of week:?

Still not seeing times in week view

*I still have not gotten a solution* to why the hourly times (eg 8 a.m., 9 a.m., etc.) no longer show in the left column of iCal in either the daily and weekly screen views. Only Noon shows in the column under the year header (2008).
If I print a calendar for any of the three views, the times DO show on the printed page as expected.
The problem showed up on this machine after the upgrade to 10.4.0. Dates do show on another machine on the same home network running 10.4.11. It is a basic iMac with only the fonts that came with it or software installed.
I have removed the iCal prefs as suggested in a previous post, but that had no effect. I have adjusted my prefs to the day range and hours to show at a time and there were no changes. My pref setting are exactly the same as the other computer that shows times.
I also removed iCal yesterday and reinstalled the program from the Tiger OS disc. No change.
It is not the font conflict that causes the date of the dock icon to be misaligned (when don't use the Apple Helvetica). I have turned off/on fonts in font book to check. I have over 400 font families, but normally only about 50 families are active.
*I have been trying for since November 2006 to get a solution to this*. Does anyone know?
The closest Apple store is over two hours away and when I did visit it once, I was told I had to make an appointment on a future day to see a Mac expert.

Greetings,
The calendar will always have all 24 hours on it. What you can do is set the number of hours you want in the day, in preferences, which will scale the hours for you, then slide the screen to show the hours that you want, and then quit iCal. Restart it, and it should come up with the same view that you left with. This way it looks like just the hours you selected.

Anyone know how I can print a two page weekly view from ical

Hi there.
I'm trying to print (from my ical) a weekly view into a Franklin planner page. i would like to print a week into two (side by side) 5x8 pages. Anyone have any idea? Can the iplanner app do this?
Thanks!

After playing with the settings, it doesn't look like that's possible.
My thought is that you could try the 8x10 size and cut it in half. But since you probably don't have 8x10 paper lying around, you could try doing it as a PDF.
Try this: (Mac OSX Leopard only)
Set up your print options in iCal, choose the 8x10 paper size, and press "Continue." Then, instead of choosing "Print," click "PDF" and "Open PDF in Preview."
From here, you could print it on regular letter size, and trim it down for your book. Or photocopy it onto your 5x8 paper.
I know that's not ideal, but you know, it's an option.
Message was edited by: heidismiles01

Printing event locations in Week view

Hello,
I'm trying to print out my class timetable for the term, and it would be exceptionally useful if i could see the locations of each class/event in the print out rather than having to write them in by hand! I can't see any option to select/deselect this in iCal's print options. Does anyone have any tips for how to get an iCal event's location information to appear in the weekly view printout? I could have sworn I was able to do it before (but I might be dreaming...).
Thanks in advance,
Lauren.

Hmm, suddenly they locations have appeared again on my latest attempt to print them out. Not sure what that was all about, but whatever it was is now sorted.
Cheers anyway!

Can't visualize the time on the weekly view on ical

Can anyone help me out, I can't see the times on the left of the ical panel in the weekly view and I can't seem to change this in preferences. Has anyone had this problem?

I have a similar problem, have endured several calls to apple care, two trips into the genius bar, had 2 computers rebuilt and after all that, the first sync with MobileMe restored the problem. My profile/preferences only recognises the hour 5:00AM and the hour markers on the day view and week view all say Sat AM, Sat PM in every hour. Please help. This is driving me crazy. I'm pretty sure it has to do with Preferences. If I create another account, iCal is fine on that account.

Publishing Ical in weekly view with start time I want

I have my Ical set up to start at 11am and end at 9pm. When I publish my calendar it still shows start time at 7am on weekly view. How do I publish my Ical with the start and end times I want?
Thanks

epee91,
What setting do you have in System Preferences...>Language & Region>First day of week:?

Printing week view omits times

Similar Messages

Maybe you are looking for