Printing - Windows Network Printer - ALMOST THERE!!!!

Ok,
At work I connect my powerbook (OS X 10.4.5) to the local-area network (all other computers are Windows based). I have set up my computer to access the shared Windows printer on the server (Windows) computer. My computer accesses the shared printer with no errors and data is sent to the shared printer. The problem is that numerous numerous blank pages as well as pages with some "interesting" coding on them print out, but not what I had sent to the printer to be printed.
So there is definately some kind of communication error occuring. I have tried setting my printer settings to both Generic PostScript Printer and also HPLaserJet 2100, which is what the printer actually is, but neither method works. I also got on HP's web site and downloaded the most up to date driver and ran the install on my computer with the same results.
Any suggestions would be greatly appreciated. Thank - Gavin

It may work better with a third-party driver such as the HPIJS drivers or the Gimp-Print drivers, but this is not the case with all printers.
iFelix

Similar Messages

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

OSX Lion, Windows Network Printer

I upgraded to OSX Lion, the process was easy and works well.
The printers I setup with Snow Leopard on the windows network do not function anymore.
When I print the printer goes to pause immediately. Release the job, it goes to pause again.
Oddly before one could browse the network and add printers. That functionality is also gone now.
Some of the printers require authentication the previous OS would allow you to enter your windows network password.
There are other folks also complaining of the same issue. It may have to do with the SMBX that is part of the new OS.

I have the same issue, and with me, it is not a keychains issue.
In the past, my Brother HL-2030 laser printer was connected to my DSL modem (a Telekom Austria Pirelli PRGAV4202N). After entering its IPP URL, that worked perfectly.
With Lion, this has stopped working, showing exactly the symptoms you described (printer goes to pause immediately).
Today, I have moved the printer from the Pirelli modem to my Iomega StorCenter ix2-200 NAS which supports USB printing, too.
With the NAS, printing does not work, either, but the symptoms slightly vary. In the beginning, there is a slight improvement: When I click the "+" icon for adding a printer, the printer shows up in the list! (This is new - with the Pirelli modem, I had to manually enter the IPP URL.)
But as soon as I try printing, the printer queue dialog (German MacOS) shows "Drucker suchen" ("searching for a printer") for a few seconds, and then the printer dialog shows the printer as paused ("Angehalten.") with the additional information "Drucker ist nicht angeschlossen" ("printer is not connected").
When selecting the blue "i" (print job info), the information "Auftragsnachricht: Der Drucker-URI ist falsch oder existiert nicht mehr." (literally: "print job message: The printer URI is wrong or does not exist any longer".)
This is really annoying, and I am desparately looking for a solution, too.

Printing to a Windows Network printer after 10.4.9 upgrade

Very desperate with this. We have a couple macs at the office and after a move and some software updates all cannot print via a Windows network printer.
Unable to connect to SAMBA host is the only error we receive.
I checked my smb:\\ syntax, I have tried IP address, tried picking from the list (which by the way the printers do show up yet you cannot print to them)
Extremely frustrating and with an Anti-Mac IT director this gives him more ammo to say Macs are irrelavant in the workplace.
The Macs are bound to Windows Active Directory and the users are Active Directory users. We do not have a Mac OS X server. Our printer server is Windows 2003 SP1, the printers range from an HP LaserJet 4100 to a Xerox WorkCentre 24, all do not work.
The ONLY network printer that appears to work is the printer associated during the login
Curious if anyone with 10.4.7 and higher have problems....

More info...here is the cups/error log when trying to print from a newly added Windows network printer...looking for some help on this....
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox device-uri to "smb://HOPE/fps2.projecthope.org/FPS2-Color Xerox" (was "file:/dev/null".)
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-is-accepting-jobs to 1 (was 0.)
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-state to 3 (was 5.)
I [22/May/2007:12:22:45 -0400] Saving printers.conf...
I [22/May/2007:12:22:45 -0400] New printer 'FPS2ColorXerox' added by ''.
I [22/May/2007:12:23:05 -0400] Saving printers.conf...
I [22/May/2007:12:23:05 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:16 -0400] Saving printers.conf...
I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:16 -0400] Saving printers.conf...
I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:20 -0400] Saving printers.conf...
I [22/May/2007:12:23:20 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:37 -0400] Adding start banner page "none" to job 5.
I [22/May/2007:12:23:37 -0400] Adding end banner page "none" to job 5.
I [22/May/2007:12:23:37 -0400] Job 5 queued on 'FPS2ColorXerox' by 'js721'.
I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/cgpdftops (PID 6183) for job 5.
I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/pstops (PID 6184) for job 5.
I [22/May/2007:12:23:37 -0400] Started filter /Library/Printers/Xerox/filter/XeroxWCPFilter (PID 6185) for job 5.
I [22/May/2007:12:23:37 -0400] Started backend /usr/libexec/cups/backend/smb (PID 6186) for job 5.
E [22/May/2007:12:23:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME
E [22/May/2007:12:23:39 -0400] [Job 5] Unable to connect to SAMBA host, will retry in 60 seconds...DEBUG: Page = 612x792; 11,11 to 601,781
E [22/May/2007:12:24:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME

Macbook Pro not printing to Windows network printer

Hello,
Recently purchased Macbook Pro Mac OS 10.7.2 Lion and I am unable to print to a windows network printer.
When I click the print button nothing happens. I have tried to print from Safari, Word, Excel etc and nothing happens.
The printer is added and showing as idle. ( I am able to print to the printer from my own Windows 7 PC).
I have reset the printer settings and re-added but the issue remains.
Both the printer and Macbook are connected to the network.
Has anyone any suggestions please?.
Thanks,
Frank

. are you using the right driver? try checking with HP if they have a driver that is compatible with lion.
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?taskId=135&cc=u s&lang=en&prodSeriesId=3690646&prodTypeId=18972

HT3049 Why do I keep getting "Connection failed: NT_STATUS_BAD_NETWORK_NAME" when trying to print on Windows networked printer over wi-fi?

Why do I keep getting "Connection failed: NT_STATUS_BAD_NETWORK_NAME" when trying to print on Windows networked printer over wi-fi?

If I run the following (on the machine I'm trying to set up the share)
smbclient -L localhost -U%
I got the following output
Connection to localhost failed (Error NT_STATUS_CONNECTION_REFUSED)
so I thought it might be something incorrect with the iptables side of things, however I haven't really touched that at all and it seems to look correct
iptables -nvL
Chain INPUT (policy ACCEPT 667 packets, 79977 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 157 packets, 20724 bytes)
pkts bytes target prot opt in out source destination
So from my (very little) knowledge this appears correct (I think)... However it appears that something is blocking access somewhere.

How do I print from an iPad to a windows network printer?

How do I print from an iPad 2 to a windows network printer (without AirPrint)?

Thx for the suggestion, but it defeats the purpose by having to have my desktop computer running. I am looking for an app or hardware device that will allow me to print directly from my Ipad to my printers without having to turn on a computer to do it.
I have tried the Lantronix xprint server and while it works with my older Brother Laser it does not work with my newer Kodak ESP Office 6150 (and it doesn't look like they are even interested in attempting to write support for it into their printer list)
I have tried every app in the app store and none of them do the job WITHOUT having to have a computer running on the network.
Let me re-state the problem...
I want to print from either my Iphone 4 or my original version Ipad to my network attached printers without having to have a computer running on the network to do it. I have a Brother HL-5150D laser printer hooked to my apple airport extreme's usb port and a Kodak ESP Office 6150 connected to the network via WiFi. How can I do this.

Error When Printing on Network Printer

I am trying to connect to a windows network printer through my MacBook Air. I can connect to the printer via the windows network and can send documents to print.
The document goes through to print but at the last second it says there is an error.
When looking on the network windows computer, in which the printer is installed, I can see the document has gone through to print using the printer dialogue box for microsoft, but it details there is an error and the document doesn't print.
It seems that they are connected but there is still an error.
Both Windows and Mac computers are up to date currently and the printer is a HP Deskjet F4180.
Appreciate any help.

The problem is that HP wrote their driver(s) to only use the comm protocol they wanted to support. In your case, bonjour via USB (&/or Wifi?).
You need a different driver - that can use all the standard comm protocols available in OS X, like Windows printing.
(remember that I don't have your printer to test this)
Try the 3-part driver set hpijs from here (it says for 10.8, but others say it works with 10.9):
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx

How To Print To Network Printer

I want to know how to print to network printer which is connected to Windows 7 PC.

D2KWUTIL is a PLL developed by Duncan Mills (who's name you ought to recognise from this forum). It provide's lots of useful functions for enhancing Forms in a Windows environment. You can download it from here: http://technet.oracle.com/software/products/forms/content.html
Cheers, APC

How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?

How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?
I am changing the set up of my home computer to add another computer.
I would like to go wireless from my computers to the hub and wired from the hub to my
printer. I do not think this printer can do that since it does not have the ports to connect to a router hub, I think.
I am rather new to this way of setting up, so any help would be nice.

You could get a wireless router that supports USB printers, but these only support printing, not scanning. You could just go buy a new wireless printer since your printer is pretty old, anyway.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Windows network printing to HP Laserjet 4L

Recently got our first mac, an iBook runing OSX 4.4 Tiger. A great part of the deal was that we could get a free printer, a Deskjet 5900 series to replace our old color printer which was not working so well. We have a home network with 2 desktops both running Windows 2000, a printer connected to each one, a linksys modem connected to cable and a linksys router connecting them all via ethernet cable, as well as wireless capacity for a couple of other notebooks (another WIndows 2000 and a powerbook).
When we bought the iBook a concern was that it would work okay with the Windows network. The internet connection and file sharing is working fine, but we still can't print.
After talking with various support people at Apple and HP, we were assured that there was no way to print through the Windows computers, and that the best option was to get either a print server, or preferably a router with a printer port. Furthermore, they said the 5900 series doesn't work through the network at all, and can only be connected directly to the mac. So our only bet was the other printer, an old reliable Laserjet 4L.
So I invested time and money in a SMC Barricade router with a parallel connection for the Laserjet 4L. (It predates USB) This is daisy-chained to the Linksys router. via a crossover patch cord going from LAN to LAN port on the 2 routers. The iBook is now connected to the new SMC router, and the 2 Windows 2000 desktops to the Linksys, and everything talks to everything else, the 2 Windows computers print fine through the router, but I still can't figure how to set up the printer on the mac. I installed Gimp-Print, which has a driver for the 4L, but can't figure out how to get to the printer. The SMC people told me to put in the IP address of the router, which worked for the Windows computers. However, when I tried typing that address on the iBook as HP IP Printing, which seems the best option, it just says Not Found.
I talked to Apple again, and this time they told me I'm up **** creek bacause it's a parallel printer and they are no longer supported. Period. But he said I could try this forum, and if anyone could help me it would be you, gentle readers.
Anyone have any suggestions at all?
iBook Mac OS X (10.4.4) Windows network user

Success! I updated the OS X from 4.4 to 4.5, but the Printer Browser window looked the same. It took a support person to tell me the obvious, that I had to press the little oval button on the top right to expand the window. I then tried installing with CUPS+Gimp-Print, and default queue, but when I tried to print, the print queue stopped itself. I deleted that, and reinstalled, using Foomatic/hpijs, and the LP queue, and that is working fine! So I don't know if the problem was the driver, or, more likely, that the default queue wasn't found.
As for the DeskJet5940, I am now using a Deskjet5850 foomatic/hpijs driver, and so far it is working too. I was able to print a web page with some graphics. I imagine the printer model is too new to have a 3rd party driver yet--maybe one will come out in a while.
But the embarassment of driver riches has given me a new, much less urgent question. I now have 3 drivers available for the LaserJet 4L, the CUPS+Gimp-Print, the vanilla Gimp-Print (both v5.0.0-beta2), and the Foomatic/hpijs. Does anyone have an opinion about which of these is more likely to work well? Does my particular setup (printer attached to parallel port of the router) make any difference?
iBook Mac OS X (10.4.4) Windows network user

Can't print .pdf files on windows network printer

Hi,
I cannot print .pdf files on Canon IRC printer with UFR II 2.23 or 2.24 drivers connected through a windows network by LDP protocol, either with Apple Preview or Acrobat Reader - looks like the software doesn't find the printer (I have the rainbow whell and the software does not answer). It can last for hours, there is no other solution than forcing the soft to quit and finding another way to print. I have updated Canon drivers from 2.23 to 2.24 (all supposed to work with Lion) and that does not fix the problem.
This problem does not happen with Ms Word or Safari (or, more generally, other types of files) and it worked fine with Snow Leo even with pdf!! I also have windows XP with Parallels and guess what? I can print through Parallels with Acrobat Reader (for windows XP) on the same printer on which I cannot print with my Mac with Lion and Preview or Acrobat Reader for Mac!
Please help !!
Alexis

Correction
It works with Acrobat but the printer does not like queues of documents...
The site privided me with the topics I fas looking for about this : it's a Canon drivers and Lion permissions problem.

Window 7 32 bit excel or word hangs when print using network printer

When trying to print from Word or Excel 2010 32bit, once I click print, there is a drop down menu to select
a printer. When I select the network printer (a HP Color Laserjet 5550), underneath the printer drop down it says "connecting to printer". Word or excel will hang and then show up as "not responding".
My pc is running on Windows 7 pro 32 bit, Word and Excel of Office 2010

Hi,
I noticed that you replied the similar thread, have you tied to the customer's resolution(Update/Reinstall the 32 bit driver on the network Print Server and then re-install the network printer, and then ran malwarebytes and
removed malware.)?
Then, we may try to plug the USB cable from your printer into an available USB port on your PC to test if possible.
If the issue still exists, I recommend we go to Event Viewer and collect the Event log. It'll help us to troubleshoot the issue, you could upload here.
http://windows.microsoft.com/en-us/windows/open-event-viewer#1TC=windows-7
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Cannot print to a Windows network printer

Hey guys,
This is my first post here, so hello to all the users here and most of all to ones that are willing to help me out
I have bought an iMac G5 (PowerPC not MacIntel) and upgraded to 10.4.6 (I plan to update it to 10.4.8) for all the bugfixes etc.
I have connected my Mac to a Windows Domain successfuly and have also installed a network printer (Kyocera FS 1750) too, without any problems.
The thing is that when I try to print using Mail or Safari, or AppleWorks or even Microsoft Office for Mac the Print window pops up but when I try to print pushing the Print button nothing happens. The print window stays there and it doesn't print anything. I have the print logs opened while I try to print so I can see if there is any error, but it doesn't write anything in the log because it doesn't even try to print!
There is a giant BUT however! While it doesn't print using the applications I mentioned above it does print using iPhoto or Preview applications... What is going on here guys? I tried using other drivers but still nothing, the problem remains.
Anyone has a solution? Sorry for my Grammar, English are not my native language so bear with me
iMac G5 Mac OS X (10.4.6)

I have Xerox M118 Network Printer. The driver available on the internet does not support the "Auditron" feature that it has. I need a driver to run this printer.

Printing to my Windows Networked Printer from my MacBook

Let me apologize upfront, I'm new the world of Apple, just coming over from the PC world and so these will surely be stupid questions.
I just got a new MacBook (which I LOVE!!!)
I have a Desktop PC running XP
I have an HP OfficeJet G85 connected by USB to that desktop PC
I have a wireless netgear 802.11b/g router
WHAT I WANT TO DO: I want to print wirelessly from my MacBook to the HP OfficeJet G85 (as I have been able to do with several PC notebook computers...so I know everything is configured right on that end of things). Specifically, I want to be able to take advantage of the double-sided printing duplexer when printing wirelessly from my MacBook.
WHAT I CAN DO:
-I've been able to plug the printer in via USB to the MacBook and install it. (but that's not wireless)
-I've been able to print wirelessly using CUPS and a SAMBA server, which I DO NOT understand but found some website that told me how to set it up. BUT when using New DeskJet Series CUPS v1.1, if I attempt to do double-sided printing, it causes an error on my printer that halts printing and requires it to be restarted; plus, this give me pretty crummy quality printing.
WHAT I CANNOT DO:
-Locate the darn correct print driver file on my MacBook (I know it's there because I installed it as part of the all-in-one software I downloaded from HP and because I was able to install the printer via USB; but when I look at the list of printer drivers, my printer is never on that list AND because I don't know what the driver's name or file extension or location would be on a Mac, I can't hunt it down myself, eventhough the Mac is willing to let me try to).
-In leu of using HP's specific G85 print driver (which I feel I should be able to do...you'd think their setup assistant software would help, but it doesn't let you navigate through your network to direct it to your printer...if its scan doesn't see it, then it's no help), based on what I've read, my other options are:
--Buy an HP JetExpress Print Server (too expensive) or Airport Express (which probably won't support this printer or help my situation...am I correct about this???)
--Use this hpijs ppd thing(from http://openprinting.org/showprinter.cgi?recnum=HP-OfficeJetG85)...assuming all of my conclusions and assumptions above are correct, this is what I need to do...the only thing is I don't understand what it is or what I'm supposed to do with it. After I download the PPD, do I need to download or run something else that uses this PPD file? Am I supposed to put it in a particular folder? I've downloaded the HP-OfficeJet_G85-hpijs.ppd file to my Mac's desktop...what do I do now?
Thanks in advance for any help you guys can offer!
Jeff

Jeffry,
Have you had any luck? I purchased a macbook and apple care can't help me figuire it out. My situation is pretty close to yours and I've been following your post but looks like no help. Please send me an e-mail if you have figuired how to print over your network.
Thanks
Allen Hilder

Printing - Windows Network Printer - ALMOST THERE!!!!

Similar Messages

Maybe you are looking for