Printing wirelessly using airport extreme base station

I recently set up a wireless network at my house using an airport extreme base station. I plugged my usb printer into the base station and, according to the manual, I can print wirelessly. However, when I go to print, after following the manual instructions, it just times out. Any ideas?

There is already a thread (or two) on the PSC 1410:
Some people have had success here:
http://discussions.apple.com/thread.jspa?messageID=5987003&#5987003

Similar Messages

Using Airport Extreme Base Station As A Wireless Card?

Hi,
I don't know if this is even possible but here's what I'd like to do:
I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station. So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
Here's my real question:
I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
If this is possible, how can I do it?
Thank you in advance for any help with this.

Ernest Lohrer wrote:
Hi,
I don't know if this is even possible but here's what I'd like to do:
I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station.
She has an "integrated" modem/router/access point.
So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
Here's my real question:
I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
If this is possible, how can I do it?
Set up the AEBSn as a "bridge" and connect the G4 Mini to one of the "wired" internet connections.

Using Airport Extreme base station as wireless Cable router and airtunes.

Can I replace my wired Roadrunner cable modem with a Apple Airport Extreme wireless 56g router removing the wired modem out of the picture?
I just have read and have not come to the complete conclusion that the Airport extreme base station is a standalone wireless router.
I would like this if it is a wireless standalone router as I want to but a pair of wireless airtunes router for music around the house keeping the Airport Extreme in my room where the airtunes routers would not be as I have the computer in my room and I have iTunes right there and would not need the airtunes routers in my computer room.
Leon.

Can I replace my wired Roadrunner cable modem with a Apple Airport Extreme wireless 56g router removing the wired modem out of the picture?
The AirPort Extreme Base Station (AEBS) does NOT have a built-in DSL/Cable modem. You will still require a Cable modem in order to access your ISP's Internet service.
I just have read and have not come to the complete conclusion that the Airport extreme base station is a standalone wireless router.
The AEBS IS a wireless router, but it is NOT a combination wireless router & cable modem.

Why can I no longer print from my Windows XP computers to my Bonjour connected Canon printer thru an Airport Extreme Base Station (f/w 7.6.4, model A1301)?

Something has changed recently and I haven't figured it out. My 2 Windows XP computers are no longer able to print via Bonjour. I have tried removing and reinstalling Bonjour. Upgrading the firmware on the AIrport Extreme Base Station and comparing Port settings from an able to print Windows Vista laptop. Port settings match and Bonjour says it sees the printer...but the communication is not happening between the computer and the networked printer, it times out and produces an error in the print que. Both XP computers have no problem using the internet via the Base Station. One is wired and one is wireless. Thoughts?

Sounds a bit like a problem being discussed in this thread:
http://discussions.apple.com/thread.jspa?threadID=2651093&tstart=0
I suspect some kind of update is at fault. Like you, my printer/base station setup had been working fine until recently.

Using AirPort Extreme Base Station to Connect a Hard Drive

I have a wireless network set up using a wireless device provided by my network provider. What I would like to do is to use my Airport Extreme Base station only to connect a hard drive to it. However when doing so, Airport Utility does not recognize or see the Extreme. The Extreme can only been seen if connected to the router provided by my network provider. How can I set up a wireless hard drive or printer with the Extreme without connecting to the network?

Samir, why you wanna use service provider wireless instrument when you have world class wireless device
you don't need 2 wireless ???
I am not expert but I used common sense, I had linksys N series router but recently I bought TC 1TB
so what I dumped my N router in store and went ahead with TC installation, Trust me it took me 10 minutes to configure my 4 HDD 5 computer printer etc with TC
I am sure you have a ethernet modem too separate from your wireless instrument
try to do a clean installation ( thats where all these people who has problem, trying to connect to their existing network
try setting up your AEBS as fresh wireless device connect to your modem and run Airport Utility
I am sure you will be a happy apple customer
good luck

Can't connect 2nd airport extreme wirelessly to airport extreme base station

I have an Airport Extreme base station connected to my cable modem. I have a 2nd Extreme I am trying to connect wirelessly to the base station to extend my network. The Airport Utility does not see the second AE. Also the status light on the 2nd AE is flashing amber. I have tried hard resets and the Utility will not find it.

OK, thanks for the information.
I'm not sure if this has anything to do with your issue or not, but according to Apple, a Windows PC cannot be used to configure the newer models of the AirPort Extreme correctly. Here is what the Specifications page for the new AirPort Extreme indicates:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
http://www.apple.com/airport-extreme/specs/
I don't have a PC here to test out the setup.
We can try to configure the 2nd Extreme to extend the 1st, but if that is not successful....and you used the PC to configure the 1st Extreme....it may be necessary to start all over again and reconfigure the 1st Extreme using recommended software before the 2nd Extreme can be set up.
For now, temporarily move the 2nd Extreme to the same room or close proximity to the 1st Extreme. Power up the 2nd Extreme for a few minutes, then hold in the reset button on the device for 8-10 seconds and release. Allow a full minute for the 2nd Extreme to restart to a slow, blinking amber light.
On the home screen for an iPhone or iPad.....
Tap Settings
Tap Wi-Fi
Look for an option to Setup a New AirPort Base Station
Tap on AirPort Exteme just below that option
The utility will open up and take a minute to analyze the network, then suggest that the 2nd Extreme will be configure to extend the 1st Extreme. Enter a device name that you want to use for the 2nd Exteme and tap Next.
The utility will configure everything for you. When you see the message of Setup Complete, click Done.
Now move the 2nd Exteme approximately half way between the 1st Extreme and the area that needs more wireless signal coverage and try things out. Extending this way using wireless will usually result in a loss of about half of the potential network speed, but that is not avoidable with a wireless method.

Certain web address not available when using Airport Extreme Base Station

Hello. To access my "secure" account at the local library, I must use a web address that contains a colon followed by a number. I believe that this is a port number, but I confess that all the discussions here regarding ports are going well over my head, and I may be incorrect with this assumption.
My problem is that while I CAN access this site by connecting to my DSL router directly via ethernet cable from my iMac G5, I cannot access the site when connecting to the internet in the mode: iMac Airport to Airport Extreme Base Station to DSL router via ethernet.
The format of the web address is: http://xxxx.yyyy.net:####/zzzzz/, where #### is the number I guess may be specifying a port and causing my problem.
Can anyone advise me, in simple terms, how to get to this address when in the Airport--internet connection mode? Will the solution have any adverse side effects?
Regards and Thanks
iMac G5, 2.5 year old AEBS Mac OS X (10.3.9) Westell 327W 4-port DSL Modem, not using wireless feature.

Very likely the embedded firewall that comes with your AirPort blocks the port you are trying to use.
In order to solve this, best way is to modify the AirPort settings (open the AirPort maintenance app):
Click at the tab "port forwarding" and add the desired port as "public port" to the list. "private IP" is the IP of your Mac and for "private port" type in the port number again.
If you are unsure about the IP of your Mac, look at the network maintenance application.
Well, one side-effect is that you have an open port in your configuration which could cause security issues... but only if you are paranoid So there is nothing to care about (note that without the AirPort inbetween your Mac and your modem, this port would be not blocked and freely accessible

Using AirPort Extreme Base Station as a network AP

I have a Netgear N900 wireless router and and an Airport Extreme Base Station.I used my N900 to create a high speed wirelss network. I would like to use my Extreme Base Station as an access point on this network, in order to get AirPlay and some extra ethernet ports in another part of the house. Is this possible to do, and if so how?
The "extend your current network" option from the Wireless Mode menu does not work. There is no "join your current network" option, like on the Airport Express. What am I missing?
Thank you in advance,
Alex

The Extreme *does not* let you joint an existing network
Yes it does. Please open up AirPort Utility 5.6, select the Extreme and click Manual Setup
Click the Wireless tab below the row of icons
Hold down the option key on your Mac while you click on the Wireless Mode selection box.
What happens? Now you see the "Join" selection.
Problem is, only the USB port is enabled if you configure the Extreme to "join".......as I already stated. The Ethernet ports are not enabled.
The AirPort Express 802.11n has a special feature that allows it to "join a wireless network" and the Ethernet port can be enabled.
The AirPort Extreme does not have this feature.....which might be the reason why Apple hides the "Join" setting for the Extreme.

Using Airport Extreme Base Station with Cable Modem

Hi everyone,
I have just bought an Airport Extreme Base Station. I connected it to my cable modem (Surfboard 3100) through the WAN port and my iMac G4 is connected to it through the Ethernet port. Installed the Airport Utility, and configured the base station with the normal settings of DHCP for Internet and DHCP for internal network.
After restarting the base station, my Internet connection from the iMac through the base station is very slow and most of the time will time-out. My Internet connection through my PowerBook G4 using wireless through the base station is ok though.
My question is, is there some setting which I should set for the Ethernet portion of the base station to make my wired connections to the Internet work?
Thanks in advance for any help!
regards,
Weiming
iMac G4 Mac OS X (10.4.10)

Hi,
My iMac G4 does not have an Airport card. I did not physically restarted the base station, its part of the sequence when we update the configuration, that the base station will restart on its own.
regards,
Weiming

Wireless connection airport extreme base station to dsl modem

Attempting to set up a home network through an old Airport Extreme Base Station. My old DSL modem (AT&T's 2 Wire Gateway) has one enthernet port that is taken up, and I want to know if there is a way to connect the DSL modem wirelessly to the AEBS. I have a laptop PC, my wife has a MacBook, and a Mac Mini is connected to the HDTV. Currently, the AEBS is only connected to a printer, and all computers can connect to it fine. Want to home netweork for back up files, and to share movies, music and vidoes. Just want to work with the equipment I have and not buy a new modem.

Sorry, but no. You will not be able to connect the AEBS by wireless to the DSL wireless gateway to get the results you are looking for. Instead, you could either connect it directly to the gateway's Ethernet port, and then, connect whatever was connected to the gateway to the AEBS instead, OR connect an Ethernet switch to the Gateway, and in turn, connect the AEBS to the switch.

Ip8500 does not print with XP & Airport Extreme Base station (OK with Macs)

My canon ip8500 is connected to an Airport Extreme Base station. I can print from either Mac (a G4 and a new iMac 24") but no luck with either XP laptops (accessing the internet is no problem). I've installed both PC's with Bonjour but after a minute or so I get a failed to print message. Any suggestions?

They are simply obsolete. You cannot update their firmware to be compatible with new products. Buy something to replace them such as a couple of new Airport Expresses.

Using airport extreme base station modem to fax

Can I use an Airport Extreme Base Station with a modem to send faxes?
powerbook G5 Mac OS X (10.4.8)

kersto, Welcome to the discussion area!
No. The built-in 56k modem is only for connecting to a dial-up ISP. There is no ability to send FAXes.

How do I get a VPN acct accessed using Airport Extreme Base station?

I have PC running Windows 2000. For my job, I access a hospital VPN at home. In my home, I am able to set up the Extreme Base Station for wireless conductivity with computers in my home and all have access internet wirelessly. No problem.
The problem is that I cant get it all to work together. How do I configure the base station to recognize/allow the VPN client to enter my network?
I currently have WEP 128 on. The computer used for VPN is hardwired to the base station. Even with security turn-off, I cant access the VPN via base station set up as it is.
help!
PC Windows 2000

I recently got my roommate's Lenovo t43p with VPN to finally work with my Airport Extreme.
1. Open the Airport Utility
2. Double click on your Airport Express on the left side to open up the panel.
3. Click on the "Internet" tab and then select the "DHCP" tab.
4. Click the "+" sign under "DHCP Reservations"
5. Create a name for the profile like "XP Work Laptop" or whatever, and then click Continue
6. You'll need to get your Windows laptop's MAC address which is sometimes under your laptop on a sticker, or you'll have to dig through XP's ridiculous Control Panel to find it.
7. Enter your laptop's MAC address in the field.
8. Lastly, in the 'IPv4 Address" field designate an IP address for your XP laptop that is within your router's range, if you're not sure of the range, the "IPv4 Address" range should be auto-populated with an IP address and you can just try it with that, or if it doesn't work you can change the last number to something higher but no more than like 4-5 digits more.
Hope this helps, Good luck!!

Printing wireless using airport extreme

can printers that support 802.11b/g work wirelessly with airport extreme?

The experience I have had with wireless printing is very easy! Pretty much connect the printer to the AirPort and add it to your computer via "Print and Fax"!
14 in. iBook G4 Mac OS X (10.4.8) 1.5GB RAM 60GB HDD 1.42GHz G4

Can't create a working Wireless Network using Airport Extreme Base Station

I don't know what I'm doing wrong...
I've got the cable from the modem going to the base station. I follow ALL on screen instructions. I select "Using DHCP" because when I plug the ethernet cable into my MBP it automatically does everything for me, and has that as its setting as well.
I get to the stage where it asks whether or not I'd like it to share an IP or go into bridge mode, I'm not sure what either of these two mean...I've tried both and both result in no wireless internet.
On several occasions I get to the end, and after I do the "final" update is comes back with one problem - internet connection, saying the router doesn't have a valid IP.
I'm totally lost on what to do here...
If you need more information just ask...please...

The below procedure is described in your AirPort setup manual, but it can be a little confusing. Here is my step-by-step procedure for an AEB setup for the system you describe:
A. Setup the 'Main' Base Station:
1. Do a factory reset of your AEB (main), then turnoff the DSL Modem and the AEB (main).
2. Check ethernet cable connections:
- DSL Modem > AEB (main) WAN port;
- AEB (main) > Mac computer running OS X 10.5.x.
3. Power-on DSL Modem and wait for it to initialise.
4. Power-on the AEB (main) and start your Mac computer.
5. Open AirPort Utility and select the AEB (main) in the LH pane. Click 'Continue' and give the AEB (main) a name and an admin password (twice). Click 'Continue'.
6. Select 'I don't have a wireless network and I want to create one', click Continue.
7. Give your network a name, select WPA/WPA2 Personal and insert the wireless network password (twice) - use 13 alpha/numeric characters for password. Tick 'Remember this password in my keychain'. Click 'Continue'.
8. Select 'I connect to the Internet with a DSL or cable modem using DHCP. Click 'Continue'.
9. Click 'Update' and wait for the AEB (main) to restart.
10. Disconnect the ethernet cable between your Mac and the AEB (main).
B. Setup Client computer
1. Open System Preferences/Network/AirPort.
2. Against 'Network Name:' select your network (the name you gave it at A7).
3. Click 'Advanced' and select TCP/IP. Against 'Configure IPv4:' select 'Using DHCP', then click 'OK'.
4. Click 'Apply' and exit System Preferences.

Printing wirelessly using airport extreme base station

Similar Messages

Maybe you are looking for