Printing wirelessly with a hp deskjet 6980

I bought me a hp deskjet 6980 which is equiped with it's own wi-fi device for printing.
Has anybody experiences setting up the printer for wirelessly printing on Mac OS X 10.4.6 or Windows XP SP 2?
Cause I followed the guidelines in the manual but never succeded.
I have a wireless airport network for internet with a PowerBook G4 and a Vaio Laptop. What I want to do is sending printjobs from both machines wirelessly to the printer.

Here are the instructions that got me through this.
Good luck.
For your issues with setting up the Deskjet 6980 printer to your network
I would recommend the following steps. These steps are based on a
process you would use if the driver installation has already been run
through on the Mac.
If you want to utilize the printers wireless functions disconnect the
ethernet cable from the printer and the air port.
Reset the printer buy holding the report (check mark) button down.
While holding the report (check mark) button down press and release the
cancel (x) button three times then release the report (check mark)
button. Once all the lights except the power are off turn the power off
(this may take a minute). Wait for one minute then turn the printer
back on. While the lights are flashing follow the steps numbered below.
1. Ensure the blue radio light come on the printer then click on the
airport icon (on the top menu bar), select hpsetup
2. Once connected to hpsetup, Print the network configuration page from
the printer again (press and release the button with the check mark).
3. Open Safari (should say cannot open page), enter the printer's IP
Address (line 7 with the periods) into the address bar, hit return. An
HP site should open (this is the embedded web server on the printer).
* NOTE * If you do not have the printers report page with the IP address
on it simply press and release the report (check mark) button and it
will print out.
4. Select the Networking tab. On the left side of the window (under
CONNECTIONS), select Wireless (802.11)
5. Click on Start Wizard.
6. Select the network name from the drop down list, click next.
7. If there is NO WEP encryption, continue to step 8. If there is WEP
encryption, enter the key (You must know this key. If you do not contact
Apple to get it reset).
8. Click Finish, the printer's wireless and network lights should blink.
9. At the top of the screen click on the word Safari and then click quit
Safari. Once Safari closes click on the airport icon and switch back to
your network name. You may be prompted for a password.
10. At the top of the screen click on GO then APPLICATIONS. Next double
click on TextEdit. type any thing in this windows and then click on
FILE then PRINT. Ensure the Deskjet 6900 series is the printer listed
and then click on PRINT.
The printer should print the TextEdit words you typed in.
Macbook Pro   Mac OS X (10.4.6)  

Similar Messages

  • Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

    Can I set up multiple usb hard drives- one for time machine and a second for media?
    Can one also print wirelessly with an old HP C6280 printer?

    Can I set up multiple usb hard drives- one for time machine and a second for media?
    Yes.
    Can one also print wirelessly with an old HP C6280 printer?
    Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

  • My HP dv4-2045dx won't print wirelessly with my HP Officejet 6500 E709n

    My HP Pavillion laptop won't print wirelessly with my HP All In One printer.  It will print if it is hooked up, and the printer works wirelessly with my other computer.  I've uninstalled the printer and updated the drivers.  The print wizard goes through all of the steps to configure wirelessly, finds my printer, tries to connect, and fails at the last minute each time.  I believe it may have something to do with the fact that I also can't scan to my laptop. 
    P.S. It used to print wirelessly.  I have no idea what changed.

    Yup, here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=mp-76971-1&cc=us&dlc=en&lc=en&​...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HT1338 problems with Mac Book 10.7.5 printing wirelessly with HP Photosmart 6510e.  I must turn off then turn back on for Mac to print.

    HP Photosmart prints with PC, Droid phone but will only print wirelessly with MacBook OX 10.7.5 if I turn off printer and turn it back on.  HP has tried, Belkin (router) has opened all ports, the problem persists.

    That is great, but I recommend channel 11 instead of 10.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How do I set up my PowerBook to print wireless with HP psc 2410

    Can someone tell me how to set up my PowerBook to
    print wireless with my HP psc 2410 all-in-one?
    What do I need to do?
    I checked ifelx list and check out ok for my model.
    Thanks,
    Kes
    PowerBook G4 15 1.67GHz 10.4.2 512MB AirPort Extreme; iMac G4 20 1.25GHz Mac OS X (10.4.2)

    Ensure that the Airport base station is configured to not distribute IP addresses.
    On the iMac
    System Preferences > Sharing > Printer Sharing
    On the PowerBook
    Applications > Utilities > Printer Setup Utility
    Add Printer
    It may work with the HP driver (which you will need to install on the PowerBook)
    It may work with a third-party driver such as the HPIJS drivers or the Gimp-Print drivers, but this is not the case with all printers.

  • Have a MacBook Pro with 10.8.1 and want to print wirelessly with HP 3054 610a, currently connected via USB. Router is Apple Extreme without WPS button. How do I enter the said and passphrase to the printer. Can't use the cd install-no Mtn.Lion support

    Have MacBook Pro, Airport Extreme router, Mtn Lion 10.8.1 and want to print wirelessly with HP 3054 610a which was installed 2 days ago via USB. Prefer to set up the printer on the wifi network, but how do I enter ssid and passphrase. On the printer control panel only has WPS option.

    You didn't look far enough .... http://www.hp.com/global/us/en/wireless/printer-setup-help.html
    The next thing is to look in the manual that accompanied the printer for how to use the wireless setup wizard!
    This is specific to your printer ..... http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02217452&lc=en&cc=us&dlc=en &product=5109847#N728

  • How do I get my computer to print wireless with HP6600

    I have tried to get my computer to print wireless with the HP6600.  I have tried all the trouble shooting things and still does not work.  The printer is contected to the wireless network.  I can print from my phone and Ipad fine without a problem.

    @ minipinny26 -  When you downloaded the drivers and attempted to install the software I am guessing the software could not find the printer.  Is this correct?
    If so, then did you try a power cycle on the circuit?
    * Unplug router and wait 30 seconds
    * Plug router back in and wait for it to completely repower up
    * Restart the PC
    * While the PC is restarting: Unplug the printer while the unit is on
    * Wait 30 seconds and plug the printer back up for power
    Can the software find the printer at this point?
    If not, then can you ping the printer?   
    * Open the Command Prompt screen by typing CMD in the Run command box
    * Type ping followed by the ip address of the printer.
    Also, take a look at the steps in the document found here.  Let me know what happens.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Printing wirelessly with Windows Vista

    Alright I just got our Vista laptop successfully connected to the TC wireless network.
    Now I'm trying to print wirelessly with the Vista laptop, but when I go into "add printer" in the Vista control panel, it's unable to detect the printer. The printer is on.
    My Macbook Pro is currently able to print wirelessly.
    Anybody know what I can try?

    I was able to add the printer on my Vista laptop with Bonjour on the disk that came with Time Capsule. Previously the laptop couldn't see the printer, but now it can wirelessly print.
    This manual was helpful (p. 61).
    http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf

  • Why can't I print wireless with Time Capsule anymore?

    I have an Epson Stylus Photo 1280 that I have been printing wireless with for many years by plugging it in to the USB port on the back of the Time Capsule. Not anymore.
    I have a MacBook Pro running the latest OS as well as the latest model Time Capsule running the latest software from Apple. I have tried using Airport Utility 5.6 which sees the printer plugged in. But when I try to add the printer to the Print & Scan system preferences, it shows up but says:
    Software for this printer is available from Apple. Would you like to download and install it?
    When I click "Download and Install" it searches for the software but then tells me:
    The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software.
    When I plug the printer directly into my MBP, I can add the printer and print without any problems.  Per Epson, I have the latest software for my printer, so I'm not sure why Apple needs to search for the software and download it in order for me to print using the Time Capsule.
    Like I said before, this all use to work flawlessly. I'm assuming all the updates have "broken" something.
    Thanks in advance for any help and suggestions.

    Well, I solved my problem.
    I deleted the EPSON folder in Library/Printers as well as Library/Cache and installed the EPSON driver via Softwar Update.
    Everything is working fine now.

  • I cannot get my HP OfficeJet 6700 to print wireless with my macbook Pro, I cannot get my HP OfficeJet 6700 to print wireless with my macbook Pro

    I cannon get my HP OfficeJet 6700 to print wireless with my Macbook Pro?  Any suggestions?

    Just found a solution to this problem via HP technical support by changing my Officejet 6700's dynamic IP address to a static IP address:
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/OfficeJet-6700-prin ts-test-page-but-not-Word-or-other/m-p/2257137#M51621
    After making these changes and rebooting my printer immediately started working again.

  • Windows 7 wireless connection to HP Deskjet 6980

    My deskjet 6980 printer has been working flawlessly with Vista for many years.  Since I recently changed to a laptop with Windows 7 64bit I have not been able to connect wirelessly.  I have tried downloading the latest software and installing the printer through Windows but have had not success with either.  I have also tried connecting the printer through a router and through it's own built-in wireless connection.
    Is there any way to connect this printer wirelessly to a Windows 7 machine?  Are HP going to introduce software for this in the future?
    Any help would be much appreciated as not being able to print is a huge inconvenience!
    Thanks for your time
    Matt

    I finally got my deskjet 6980 working on wireless network on Windows 7 64 bit.
    Follow the following instructions Exactly! :
    1)      Go Here:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=115&prodS...
    2)      Scroll down to "Network Setup" and click on : HP Deskjet 6840 and 6980 Printer series, and Officejet Pro K550dtwn Printer - Installing the Product...
    Suggestion based on my experience:
    - Follow the instructions closely. 
    - I found a couple of steps to be different than indicated in the above links.. those steps were:
    a) Under Step 1 of Wireless Setup Only: "press the network butoon to print the product information" , but actually you gotta press the Report Page Button on the printer (one with image of sheet with a check mark) to printe the product info.
    b) Step 5 of Wireless Setup Only describes setup using advanced options, I just used the available Network Setup Wizard instead
    c) Step 7 and Step 8 of Wireless Setup Only ask you to "Disconnect Ethernet cable from the printer and t\print a test page using microsoft word..", but once i disconnected the ethernet cable the printer couldn't connect to the network wirelessly.  So, I had to restart the Printer, Router and Modem before the printer could connect to the wireless network.  Also, once the printer connects wirelessly to the network you may need to add the wireless Printer to your computer (i.e. Go to Start - Devices & Printers: right-click and delete existing Deskjet 6980 printer cuz that one is probably for wired network.  Then click on 'Add Printer' - select 'Wireless Printer' - select HP Deskjet 6980 from the list generated of all wireless printers available and ADD it and make it default printer.
    Good luck !

  • Printing wirelessly with MacBook Pro?

    I'm sure this topic has come up before. Does anyone have any ideas how I can print wirelessly using my MacBook Pro? I'm trying to get Airport Express working but the 2 printers that I have are not on the list of compatible printers so I think that I might not get it to work easily.
    It is such a pain to have to take the laptop to the printer and plug it in in order to print. Any advice would be appreciated.

    Just enable printer sharing on the machine hosting the printer (be it a windows box or an OS X machine) and then print to the shared printer. A "cleaner" solution (as your printers get replaced) is jut buy wireless printers. Last year I replaced an old HP deskjet that was shared off my Vista desktop machine with an HP wireless 6988dt printer. Now there is no longer a need to keep the Vista box from sleeping when idle just to be able to print.

  • Printing Problem with Model HP Deskjet 2640 Series

    To Whom It May Concern, I am having problem with printing. There is always  a notification from the printer says" A footer of section list ser outside the printable area".Please advise. Thank you

    Hello @Tellen,
    Thank  you for visiting the HP Support Forums! I understand you are running into some print quality problems with your HP Deskjet 3050. I see when you attempt to print a letter you will only see the email address and its in blue ink.
    First I would like you to click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    What does the PSDR find? If you are still not getting black text, please continue here: Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series
    If after the troubleshooting has been done and you are still seeing the issue leave me with the following information:
    1. What is your current Operating system, Windows or Mac and which version?
    2. How is the printer connected, USB or Wireless?
    3. If you print a test page from the front panel do you see the same issue?
    I hope to hear from you soon.
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Can't print wirelessly with HP 7410 printer using Airport Extreme

    I've got 3 Macs (2 laptops, one desktop) that I was using successfully with my wireless HP 7410 all in one printer using my old Airport Base (snow) Station (822 b & g). Just upgraded for a variety of reasons to the new Airport Extreme Base station and I have NOT been able to get the printer to print wirelessly.
    I have tried all available normal methods, including, but not limited to:
    1) resetting and restarting the printer and computer
    2) installing new printer software, including driver
    3) deleting and reinstalling printers using the "print and fax" system preference
    4) using the printer on a non-secure network
    5) setting up the printer to connect via IPP and LPP
    The end result of all of this is that the printer is attached to the network, but the computer (any of the 3) cannot connect to the printer. When I run the HP setup assistant, it cannot "find" the printer.
    Everything was working perfectly before I "upgraded." Why am I not able to print with the new base station?
    Your help would be greatly appreciated.

    I have the same proble trying to print. I have a Mac and 2 PC laptops. I tried to print to three different printers and it will not work. I called Apple support and I was told that it was set up and configured correctly, that it ust be my firewall blocking the printer. I'm at a loss after $179.00 and three hours of trying to get it to work.

  • Problems printing wirelessly with Canon PIXMA iP4500

    I have a MacBook Pro 15 in 2.8GHz Core 2 Duo with 4 Gb RAM and I’m running Mac OSX 10.5.7.
    1. My Canon PIXMA iP4500 inkjet printer used to work perfectly as a printer attached to the USB port of my Airport Extreme Model A1034 modem, when my computer communicates with the modem either wirelessly or via an ethernet connection between the computer and Airport, but lately it isn’t working.
    2. When I try to print the printer icon shows up in the dock and when I click on it a Canon iP4500 series printer dialog box pops up and says the Printer is Ready but the status of the document is “Stopped”.
    3. If I click on “Resume” and error message appears: “Operation could not be completed. client-error-not-possible”. This happen repeatedly.
    4. I recycled the modem, turned the printer off and on (and did those things in reverse) and ran Airport Utility, all to no avail. I also deleted the printers in my Print & Fax System Preferences dialog box, downloaded the latest CUPS driver from Canon (ver 10.1.0.0), and recreated the printer (called Canon iP4500 Series).
    5. Network diagnostics says it can connect to the internet over either my airport or Ethernet connection but it cannot connect to the Canon iP4500 series.riousbprint.tcp.local.
    6. Also when I run the Canon IJ Printer Utility from the Canon iP4500 series printer dialog box a Printer List dialog box shows up with no USB-attached printers listed
    7. I can print if I connect the printer directly to my MacBook Pro, so I don’t think it’s a driver or USB cable problem. Curiously, when I connect the printer directly to the computer the Print & Fax dialog box automatically creates a second printer called Canon iP4500 series-1. If I use the original Canon iP4500 Series printer in this setup it says “No pages found”.
    Basically I’m stumped at this point and would appreciate some help. Unfortunately, I’m on a 3-mo sabbatical and do not have my original Canon printer software with me so I cannot reinstall the printer app unless someone knows how I can obtain it. Similarly I cannot reinstall Leopard either, though it doesn’t seem likely I should need to. Happy to try anything else though.

    Hello Basil and welcome to Apple Discussions.
    Reading your post, it would suggest there is a problem with the USB of the Airport Extreme, but I don't believe this to be case as there is not much that could go wrong with them. Instead I think there is something not right with the transport (TCP) protocols that get the data from your Mac to the Airport USB.
    At this stage, I suggest you look at installing version 5.23 of the Gutenprint driver. This version supports your iP4500 and will help to narrow the cause of the current symptom.
    Before installing the Gutenprint driver, I suggest we trash all the current Canon drivers you have installed - we can add them again later if need be.
    Open Finder and navigate to Mac HD/Library/Printers/Canon/BJPrinter. Trash all the contents of this folder and empty the trash.
    Next, navigate to the Mac HD/Library/Receipts folder. You will see the Canon iP4500 xxx.pkg and another one for the CUPS driver you installed. Trash both of these and empty also.
    Now open System Preferences > Print & Fax and delete all the Canon printers in the list (highlight and hit ' - '). It would also be handy to reset the printing system, so while in Print & Fax, move your mouse over the now empty printers list, hold down your Control key and click (or right-click if you can). Click on Reset printing system when it appears.
    Now install the Gutenprint drivers. When this is done, restart your Mac and try adding the iP4500 again. This time, after you select the Airport shared printer, you will have to open Print Using and search for the 'Canon iP4500 - Gutenprint v5.2.3'. Select this and now try printing. Let me now the result.
    PaHu

Maybe you are looking for

  • How to use OTR text in normal ABAP UI (Not in webdynpro)

    Hello , I hav a requirement to assign an OTR text to a UI element in ABAP screen. How can we do that...? I tried the syntax $OTR:<pkgname>/<aliasname> in the properties tab of the UI element, But on executinf the screen am gewtting the syntax itself

  • Organisational Unit Structure Search

    Hello, As used in transaction PPOSE and PPO1. I would like to add this structure tree search to an ABAP WD View fields. The transaction used the function module RH_OBJID_REQUEST. Can anyone tell me how this can be done? Alternately is there another s

  • Should I buy Aperture?

    hi all very simply question from a newbie i've been a pro photographer for many years now i went digital about 5 years ago and never looked back i've mainly edited my work in photoshop and am contemplating purchasing aperture but would like to know w

  • BBM6.2 on OS5 won't upgrade to BBM7

    Strange this > I'm running BBM6.2 on OS5 (5.0.0.1106, bundle 1831) but App World won't upgrade to BBM7 > tried delete & reinstall > App World still forces a reinstall to 6.2 Download via Blackberry site gives  'server error' My dataplan provider is V

  • Select Product based on date

    Hai, Product Date pd0 2012-08-11 18:45:55.780 Pd1 2012-08-11 18:55:17.020 pd2 2012-08-11 19:06:58.623 pd3 2012-08-18 12:00:01.193 pd4 2012-08-25 12:13:04.077 pd5 2012-08-25 17:28:30.347 pd6 2012-08-25 18:23:16.473 pd7 2012-09-18 18:29:58.360 I want s