Printing with Epson 2200 and Lightroom v1.3.1

Ever since installing Leopard and Lightroom v1.3.1 in my PowerMac G5, my Epson 2200 printer produces prints with a very significant magenta cast. Does anyone know of this problem or, better yet, does anyone know how to solve this problem?
Thank you in advance.

I loaded file 11832 from epson us site. This driver v3.0aAs is for v10.4.4 - 10.4.x intel based macs. Even though it's not for leopard? I did this as nothing else work prior for LR. I also downloaded easyprint v3.1bA. I set it to managed by printer then hit print, at this point I set color sync on the pull down tab along with checking the rest of that printer menu such as paper type i.e. glossy profile and the mode to advanced print quality 1440 with the high speed box unchecked. The rendering intent is perceptual & print res at 360 dpi. The print output is at acceptable than most of what I had prior which was lack luster. I did base my start point for LR from the LR book by Scott Kelby. I think the output can be tweaked a bit which is my next endeavor. This did work so I hope that this help's.

Similar Messages

Trouble printing with Epson 2880 and SL

Installed SL on my MBP but not my iMac yet as it is my main computer for printing with Aperture. I have been very happy with the 2880 and how well the prints match what I see on the screen (calibrated with i1d2). Well with SL I downloaded rosetta and the new 2880 drivers (as instructed by Epson), but whenever I choose a paper profile e.g., Premium Photo Glossy, the picture in Aperture Print Pane turns a purple hue. I, of course, have color management turned off in the Print Settings dialog. Anyone have any idea what is going on? As far as I can tell I'm not doing anything differently. More importantly, has anyone been able to get good photo printing with SL, Aperture and the new Epson drivers for the 2880 or similar Epson printer?
Thanks, Jim

That KB article just saved me from going back to 10.5. I was having the same purple problem with all Ilford and Hahnemuhle profiles.
That problem is now gone (by just disabling Black Point Compensation) but: when trying to print from Aperture (2.1.4) with my R2880, any paper I choose is apparently stuck at +roll paper+, giving a +wrong source+ error when it reaches the printer. I now have to hit preview, select the correct page setup and profile and print from there. So far this seems to work. But it's a pain and not what I want to be stuck doing for very long.
I had this problem before but only when printing to Manual-Roll. Now even Sheet Feeder options don't work. This would all be fixed if we only had a proper Page Setup option in Aperture as in every other OS X application...
At least that convoluted method gives me the right colors - which I was definitely not getting by going the system managed route.
Growing pains anyone?

Problem printing with Epson 3800 and Photoshop CS5

I came across a problem trying to print with my Epson 3800 in Photoshop CS5. I recently upgraded to Photoshop CS 5 (and Lightroom 3). I tried to print using my Epson 3800 with CS5 but could not adjust Print Settings, Color Mamagement, Paper Configuration, Expand Border because those options are unavailable and there is a line crossing through them. I get a message that says "The bundle 'Print Setting' could not be loaded because it does not contain a version for the current architecture". It then says to contact the creator listed here for the latest version: PrintSetting version 3.57, Copyright SEIKO EPSON CRP 2001-2006. I can print through Photoshop CS4 as usual, but CS5 is a problem. I haven't tried printing though Lightroom 3 yet, and have not typically used Lightroom to print, but I wonder if that will be a problem too?
Any help will be appreciated.

If you run CS5 or LR as a 32bit application you will have all these option available to you. You can then save these options as presets that can then be applied when you are running the applications in 64bit mode even if you can not access them individually.
Also you might want to check Epson's download site especially the European site to see if there are newer drivers or updates for your printer. The newest drivers for other printers like the 7600/9600 support application running in 64bit mode.
Doyle

Printing with epson r1900 and cc photoshop

I have just purchased a new windows 8 computer and have cc photoshop installed. when trying to print with my epson r1900, the only print options available are landscape or portrait and paper size letter or a4. has anyone else had this problem and if so, how did you solve it.

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=94511&infoType=Downloads&plat form=OSF_W_8-32

Going Nutz with my Epson 2200 and Missing icc profie. Pls help

Thanks for looking.
Had to reinstall my driver for my epson 2200 and now when I go to print and select the proper paper "luster" I cannot find the selection.
I've downloaded the profile again from epson, installed and still cannot select it for printing in Photoshop CS2. I can see the profile in my colorsync libs but not in my PS print dialog.
Please help.
Thanks!

I am also having a problem with all the premium papers no longer available as selections in the printer settings portion of the epson printer driver dialogue box. I have three of these printers in a lab and noticed that it happened after replacing some of the empty cartridges. I have also noticed that the packaging of the Epson cartriges has changed and and it seems to have happened after using the newly packaged ink cartridges (all the info on the packages is the same except the new boxes are narrower).
Anyone else have this problem and know how to fix it?

Trouble with Epson 2880 and SL

Installed SL on my MBP but not my iMac yet as it is my main computer for printing with Aperture. I have been very happy with the 2880 and how well the prints match what I see on the screen (calibrated with i1d2). Well with SL I downloaded rosetta and the new 2880 drivers but whenever I choose a paper profile e.g., Premium Photo Glossy, the picture in Aperture Print Pane turns a purple hue. I, of course, have color management turned off in the Print Settings dialog. Anyone have any idea what is going on? As far as I can tell Im' not doing anything differently. More importantly, has anyone been able to get good photo printing with SL, Aperture and the new Epson drivers for the 2880 or similar Epson printer?
Thanks, Jim

Hi--
Check to see if Black Point Compensation is checked; if it is uncheck it and see if the purple hue disappears.
I have the older Epson Stylus Photo 2200; do you know if the drivers for the 2880 work with the 2200?
thx
PP

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

Dunning letters printing with zero balance and no invoice listing

How to trouble shoot 'Dunning letters printing with zero balance and no invoice listing' problem

As per my understanding it could be due to OB22 settings.
refer following SAP notes
335608,191927,
373296

Elements 11 will not print with Epson R2000?

Cannot make Elements 11 work with new Epson r2000 printer. Prompt on screen states it is not compatible or settings are not correct. Epson tech support worked on it, said to contact without success, said to contact Adobe. Printer works fine on all other applications. Help please.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Which iMac for use with Photoshop CS5 and Lightroom

Any opinions on which iMac is best for use with Photoshop CS5 and Lightroom. Not sure if the 2.7 i5 with 512 graphics card is Plenty of power or if upgrading to the 3.1 i5 or 3.4 i7 is a wiser choice given the price differences. Appreciate the help

So I was reading over your post, and even though this is older and has to do with CS5, I have some information for CS6 that will be relevant to your question now that it is time to upgade the software. In general Photoshop has always been more about RAM than Processing power, though that is important too. Until CS5 it could never quite take advantage of what multi-core processors really had to offer, and even the graphics card didn't really effect much of it outside of certain features and the 3D optio
Now that is no longer true and Adobe can effeciently use all aspects of the computer to give you much better performance.
So much so that I was able to buy a brand New ASUS with the following specs:
Dual Core 2.2GHz Processors
8GB of RAM (4GB original to the machine)
Windows 7 Home Premium 64Bit OS
320GB HDD w/ 5400RPM
This machine not only runs photoshop CS6 and Launches in less than 5 Seconds... it can run Premier and After Effects as well, and this Laptop cost me less than $400 (on sale at Best Buy 2 Weeks Ago. You don't have to buy something this cheap, but isn't it great that you can and still run Master Collection effectively?
You can read my details on how to buy a Photoshop CS6 Laptop, what specs you need, comparison between Mac and PC and watch the video of my Photoshop Speed Test by reading this article:
http://robertoblake.com/blog/2012/06/buying-a-photoshop-cs6-laptop

PDFs printing with black background and white text.

For some reason some of our PDF's have been printing with black backgrounds and white text, even though they appear to be normal on the screen before they are printed. I haven't been able to confirm 100% yet but it appears to only be happening with pdfs that were created from scanned documents.
Can somebody please offer me some suggestions.

Absolutely agree with the original poster. I find white text on black background so very very difficult (I changed from using Tweetbot on iOS to Tweetlogix for this very reason) and it physically hurts my eyes to try to read it. I can just about manage with Spotify using white text on a black background on the large screen of my MacBook Pro - and I do mean "just" - but for the smaller screen of my iPhone 5 it is just impossible. Even with a retina screen such as that on the iPhone 5S there is a strange ghosting effect and it gives me a headache to look at it for too long.
This may be something to do with age! I suspect most app developers are youngsters with almost perfect eyesight, but for those of us whose eyesight is less than perfect, this white text on black background really is so very difficult.
I know there is a workaround in setting the iPhone to invert ALL colours (under Accessibility in Settings) but it's a real pain to have to keep altering this setting every time I want to open or close Spotify, and it doesn't look right anyway. iOS7 is supposed to be a light, bright, easy to read OS - sadly this new Spotify app is the opposite of that.
Please would Spotify consider adding a simple light or dark theme option, so that those of us who want it can have our much easier to read light background back again, with grey or black text? It would be a great help to those of us who have eyesight problems.
If not, I may have to cancel my Spotify Premium account and move to Deezer instead, as I mainly use Spotify when out and about in the car, so am using the iOS app a lot.
Thank you for considering this plea!

With the Photoshop and Lightroom bundle, does Bridge and Camera Raw come with it?

With the Photoshop and Lightroom bundle, does Bridge and Camera Raw come with it?

Hi,
Yes, both Camera Raw and Bridge are included. Bridge will need a separate installation, however.
regards,
steve

Good afternoon! I purchased a few months the basics of adobe photoshop package with the CC and Lightroom, but has expired, and was made the annual package. What can I do to solve this problem. I have two weddings being edited and now I can not finish the

Good afternoon! I purchased a few months the basics of adobe photoshop package with the CC and Lightroom, but has expired, and was made the annual package. What can I do to solve this problem. I have two weddings being edited and now I can not finish the work. I thank you.

Renew the subscription?

My PC crashed with both CS6 and Lightroom 4. .

My PC crashed with both CS6 and Lightroom 4. . .I purchased a Mac Pro. Can I download the Mac versions of both programs and use my currenct serial numbers?

You can with Lightroom, but not (as far as I know) with Photoshop. You ought to get in touch with Adobe's customer service people and see if you can "sidegrade" to Mac for a relatively small fee.
Hal

Problems with borderless printing with iPhoto '08 and HP Photosmart Printer

I am trying to print borderless 4x6 photos on HP Photosmart C6250 (same as all HP C62xx Photosmart printers). I am using the HP 4x6 photo paper with the perforated tab. When I select the paper size, I specify Borderless 4x6 in/10 x15 cm (tab). According to the printer manual, the tab should be facing out. I have tried printing with tab out and the tab in. With tab in, it printed the picture leaving white space at the other end equal to length of tab. With tab out as printer specified, it left a white gap at beginning of photo (not as wide as tab) and printed the photo over the perforated tab.
Anyone else figured out how to print using the 4x6 paper with tabs. I also tried printing from the HP software included with the printer and it has issues, too. So, it might be an HP problem, or is it maybe a Mac printing issue with this printer.
Thanks for any help!
Barbara

Barbara:
This is a shot in the dark but take a look at the following topic. It might just help. As they say, any port in a storm.
Topic : iphoto won't print properly to HP photosmart
It does seem like a bizarre solution however. Good luck.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Printing with Epson 2200 and Lightroom v1.3.1

Similar Messages

Maybe you are looking for