Printing with HP 8600 under MAC OS X 10.9. 4

I have added the printer from System Preferences/+, and the computer recognized it automatically. However, I cannot print on both sides (duplex) from any program. When I go to System Prefences/ Printers and Scanner, and then open Printer Queue/ PrinterSetting, I can se only General and Supplies Levels, but no Options.
Please, advise how to set up the printer to print double sides.

It may be a command that needs to come out of your print command.

Similar Messages

Printing with PSE 8 for Mac

Hi,
hope some of you may give me some help.
Have tried to print with PSE 8 for Mac, but in the printing options there is none where i can choose the type of paper (ie: glossy, premium glossy....).
My printer is an Epson Stylus Photo 1400.
It works fine with iPhoto, here i can choose paper type. And prints come out fine.
Thanks for any advice,
dangerly

My printer is a Canon so not entirely sure if this helps but when I print from PSE 8 I do not get to choose the media type until I have clicked on the print button in the PSE dialog box. I am then presented with the dialog box for my printer where I can set the media type amongs other attributes.
It is normal for the media type to be the job of the printer driver so perhaps it is the same for your printer.
Jim Graham

Selective printing restriction in CS4 under Mac OS 10.8 (french edition)

I run CS4 under Mountain Lion for 2 months without problem .... until yesterday.
I can print on my Epson Stylus pro 3800 images with Premium Photo paper (A2 size in the auto sheet feeder ) without problem, but the same image can't be print with Epson Traditional Photo Paper (which must be place in the rear manual feed slot, one sheet a time).
I tried printing with this traditional Photo paper under Apple Preview: no problem!
The Epson support service told me then that it's not a problem of their new french driver (9.0.4). They say so that's a problem with Photoshop CS4 on Mac OS 10.8.
Do you think if I downgrade the Epson driver to the 8.6.4 version, it would be better?
The Adobe support service tell me, this morning, that's not shure to get better if I upgrade CS4 to CS6!!
Have you any experience of this problem?
Thanks a lot
Jacques Camborde Photographer France

I've no error message or nothing else.
The working bar is turning in the Epson window, with the message "sending data to the printer" (translated from french ! ;~)) and then, it suddently disapears without anything else !
I've just tried checking UltraSmooth Fine Art paper preset ans a sheet in the manual load slot: perfect: printing is possible!!
Computers are mysterious!!!

Printing with presets in Word:mac 2008

Hi,
I want to be able to print with a chosen preset in Word 2008, because by calling "print", it uses the default setting.
I tried:
tell application "Microsoft Word"
tell (file print)
set Presets to "My Preset"
print
end tell
end tell
and
tell application "Microsoft Word"
print with properties {Presets:"My Preset"} without print dialog
end tell
to no avail... it doesn't report any error it just prints with the default preset.
Any ideas?
Thanks!

Hi,
I want to be able to print with a chosen preset in Word 2008, because by calling "print", it uses the default setting.
I tried:
tell application "Microsoft Word"
tell (file print)
set Presets to "My Preset"
print
end tell
end tell
and
tell application "Microsoft Word"
print with properties {Presets:"My Preset"} without print dialog
end tell
to no avail... it doesn't report any error it just prints with the default preset.
Any ideas?
Thanks!

How to connect a printer with Remote Desktop for Mac, version 8

Hello,
I use Microsoft Remote Desktop 8.0.3 with my Mac to connect to an application which is based on a Windows Server 2008.
I don't find the way to print to my Mac. I don't find the menu for it :-(
Same problem to transfert a file from the Windows Server to my Mac :-( :-(
Can you help me ?
Many thanks in advance
William

Hi William,
Please make sure that Forward printing devices is checked. This allows you to use the local printer connects to your Mac in a remote desktop session.
Getting Started with Remote Desktop Client on Mac
http://technet.microsoft.com/library/dn473012
Thanks.
Jeremy Wu
TechNet Community Support

InDesign 3.0.1 "CS" won't print to Epson 2200 under Mac OS X 10.5.7

Since upgrading to Mac OS X 10.5.7 my old inDesign, version 3.0.1 in the original CS release, refuses to print. In the Print dialog box, Print Settings area, the Media Type and Ink options are grayed out. A message in the same Print Settings area tells me the ink cartridge combination has been changed and I should delete the printer from the Printer List in the (now defunct) Printer Setup Utility and add the printer again. Have deleted and re-added through the current Print & Fax panel, to no avail. This problem happens only with inDesign. Help!!

Problem solved! I should have checked this first .. downloaded a newer driver from Epson.

Can no longer print with Laserjet 1018 under Yosemite (10.10.1)

Hello all,
I used to be able to use the HP Laserjet 1020 driver from Apple's HP Print Drivers 3.0 kit to print documents on my Laserjet 1018. It worked like a charm. Now that I have done a clean install of Yosemite, updated to 10.10.1, and installed the HP Print Drivers 3.0 package, the documents get sent to the print queue but no documents are printed...
What are my options, short of buying a new printer or downgrading to Mavericks?
I really resent regressions.... especially those you only find out about after the fact.

I just realized I had been trying to use the HP LS 1200 driver for my 1018, while I should have been using the 1022 driver, which is the one that works with the 1018 (since there is no specific driver for 1018).
So now that I have already upgraded to 10.10.1, I'm not sure if the update fixed anything for me or if I was just using the wrong driver from the start.
Anyway, the HP LaserJet 1022 driver works on the 1018 on Yosemite 10.10.1. Confirmed.

My epson stylist 3880 will not print with Photoshop CC on Mac OS 10.9.3. I've already talked to epson, the printer works with Preview.

There is nothing wrong with the printer or drivers. Something is wrong with Photoshop CC. The error box says:
"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."
Any suggestions?

Hello charlottedk, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having cartridge and printhead problems. I would like to try and assist.
I would suggest performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend following the steps in this document on an 'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or P...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Can't Backup with Time Machine under Mac OS X 10.6.6

Ever since I updated my Late 2009 Core i5 iMac with the 10.6.6 Combined Update, I can't backup my computer with Time Machine, either the Automatic Backup or the Backup Now command.
After backing up 20 MB or so, I get a message that the backup was interrupted because of disk problems, presumably the Time Machine external disk. I get the message to retry later and, if difficulties persist, to use the Apple Disk Utility to correct the problem. I followed the advice to no avail, retrying later, erasing the Time Machine hard disk and, the last time, erasing the Time Machine hard disk followed by a new partition creation.
As I filed a bug report for the Time Machine Back up command when Apple was developping Mac OS X 10.6.5, I am inclined to believe that the previous beta software bug was re-introduced by the 10.6.6 update.
I will use the Disk Utility on the Macintosh HD to check whether it would solve anything. Repairing the permissions and checking for disk problems. If the problem isn't corrected, I will submit a bug report.

Update:
It was the Macintosh HD which was corrupt, reporting 1 fewer folder and 1 more file than it should have. The solution was to start the iMac with the Mac OS X Install DVD, use Disk Utility to repair the Macintosh HD, and back up the computer with Time Machine.
The Macintosh HD became corrupt while installing the Mac OS X 10.6.6 Combined Update, a not so infrequent problem I am told.
In this instance, Time Machine realized the corruption problem, warned me, and stopped the back up before the records were falsified. Great!
Time Machine performed as expected, but its warning should have identified which hard disk was corrupt, saving me the confusion with the Time Machine external hard drive. Had Time Machine warning clearly identified the corrupt drive, I wouldn't have erased my Time Machine backup.
That's one point to improve with Lion.

Can't insert glyphs with Indesign CS5 under Mac OS X snow leopard

Hi,
I justed moved to Indesign CS5 on Mac OS X Snow Leopard.
I can't insert the glyphs.
I can open the glyph panel, I see the glyphs but when I double click they don't insert.
Does anybody know this issue and how to solve it?
Thanks for your help.
Regards
Anne
Message was edited by: AnneMLV

Try restoring your InDesign preference as described below:
http://forums.adobe.com/thread/526990

Automator: Impossible to rename file using automator under Mac OS X Lion

Hi,
Before upgrade my iMac to MAC OS X Lion 10.7.2, I had service created with automator under snow leopard in order to rename my pictures file names by blocks instead of one by one. Since I'm using Lion, this one doesn't work anymore. I have completely recreate the service under Lion and the results is the same.
You can find below my workflow that is easy. The problem is the message error in the history of automator application. The message is "impossible to rename file "file name" because this one should create conflict with existing file". I already test a lot of times with different name where I'm sure that this one doesn't exist on my Mac but all the time without success (verify also with search function under mac)
If somebody can help me, it would be very interesting because I already tried to find answer on internet without success too.
Thanks in advance for your help.

the whole automator and in particular the record action was substantially rewritten in snow leopard. and the record action is slow, unreliable and you can't trouble-shoot it. it's a wonder it works at all. the only advice i can give is to use it as little as possible. if at all possible avoid it altogether. if you do need to use it try using keyboard strokes instead of the mouse movement. for example. use command+c and command+v for copying and pasting and use tabbing to choose the correct box on the page.

LR3 wont print to Epson 3800 on Mac OSX 10.5.8

I have never been able to print through the print module ever since upgrading to LR3. I have an Epson 3800 on a MacPro running 10.5.8.
I have absolutely no problems printing through Photoshop CS5. Beautiful results! NOTHING from Lightroom: Very frustrated! Any help, suggestions
greatly appreciated! - Craig

What happens when you try to print, any error messages?
Have you tried printing in Draft Mode (check the box in the Print Job panel)?
What settings are you using to print with?
Both my Macs print to my 3800 perfectly, I am on 10.6.5 though - have you considered upgrading?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

Why does Acrobot Pro no longer deliver correctly PDF printed results under Mac OS 10.4 and 10.5 ?

Hello!
When printing with Panther (Mac 10.3.9), my PDF printouts were always correct. Now, under Mac operating systems 10.4 and 10.5 the printouts from the ink jet printer are unusable – they are by at least 15% too dark, dark areas are slurred and oversaturated (all data RGB, CMYK)
- when compared to the print preview in Acrobat, InDesign or Photoshop
- compared to soft proof resp. print preview representing the ICC paper profile
- compared to the output from Photoshop, i.e. by opening the PDF file in PS to be printed under the same parameters
- compared to the PDF files which were printed under MAC 10.3.9 which are in line with the view on the screen and the printout made from the PDF opened under Photoshop
- i.e. Under Panther printout work, as generally under Photoshop – even under 10.4 and 10.5. According to my information, it also works under Windows XP.
The problem I am talking about occurs under an RGB print workflow with mixed data, RGB and CMYK, converted into the ICC output content or embedded profiles, self-created PDF files or official test charts.
It does not make any difference where PDFs came from (InDesign-Export CS2/3 or Postscript / Distiller) or which output profile or paper was used. The problem started once I had installed 10.4 on my G4 (Acrobat 7). The same under Acrobat 8 and 9 as well as under the Intel-Mac and Acrobat 9.
The only solution I have at the moment is an external bootable hard disk operative under Panther OS to generate correct PDF printouts now.
Thank you for your help,
Peter!
Epson 2100 ink jet, Adobe CMM, Printout under Acrobat pro 9.3.2, unseparated RGB
Color management from application, printer color management de-activated
G4 under Mac OS 10.4.11, Adobe CS2 / Acr. 9, Apple Cinema LCD
MacBookPro 2.5 GHz under Mac 10.5.8 and CS3, NEC LCD 2690 WUXi
Monitors calibration by BasiCColor Display 4.1

First try downloading the latest Driver for your printer.
then go to printer Utilityand delete the current listing for your printer. Quit Printer Utility
next install new Driver downloaded from Manufacturer
finally go back to Printer Utility and add the print Driver for your Printer.
Now open Acrobat.
choose a Document that you have been trying to print causing issues
print one or two pages of the document, choose pages that seem to cause the most problem.
check results.
if still an issue try the following:
adjust the items in one of these windows:
(Note I am using my HP DeskJet 990cse as example- Should be similar though)

Printing under mac os 9 emulation in a mac os X

hi all,
i have a serious problem printing with my mac os X using the classic version.
i installed the driver for the the 9 and X.
printing under X no problem.
but under classic
when i go to laserwriter 8. i have no printer installed.
can u help consernng this case
Regards

Hi Team1
Can your computer boot up in OS 9? If so, try installing the OS 9 driver with the computer in that system, then testing the printer under OS 9. If you can get it running then, you should be able to get it running under Classic.
Cheers!
Karl

Printing with HP 8600 under MAC OS X 10.9. 4

Similar Messages

Maybe you are looking for