Printing with HP Deskjet 1510 from wireless connected ipad using computer connected to broadband

Hi,
I am trying to figure out easy way to print any content from my ipad connected with wifi through xp computer to HP Desjket 1510,

Hi Ieb_Fabulous,
Welcome to the HP Support Forums. I gather you are trying to hook your Deskjet 1510 printer to your laptop with a wireless connection.
This printer does not support wireless connectivity. I have included the Deskjet 1510 Printer Specifications for your reference.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

  • AiO remote print via HP deskjet 1510

    hello friends! windows phone just launched an app for wireless printing "HP AiO remote" and i have a deskjet 1510, a pc and a router **bleep** modem. so please tell me that can i print with my phone. if yes! how i connect my printer to a network? i tried myself i control pannel, i shared my printer but my app is not showing any printer connected to a network! please tell me the steps for connecting it to a network if wireless printing is possible with my deskjet 1510!
    -Thank you!
    This question was solved.
    View Solution.

    Hi,
    The HP AiO remote app only allow printing to a network connected printers, The Deskjet 1510 is a USB only printer and therefore it is not supported by the app
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Two-sided printing with HP deskjet 1050A?

    Hi,
    How to complete two-sided printing with HP deskjet 1050A? I looked through the properties / options menu at print preview but no options were available for this function.
    Please advise.
    Thanks,
    Patrick

    Hello,
    You should be able to print on two sides using this method for your product:
    NOTE:You can print your document on both sides of the paper, instead of just one side. Click on the Advanced button on the Paper/Quality or Layout tab. From the Pages to Print drop-down menu select Print Odd Pages Only . Click OK to print. After the odd numbered pages of the document have been printed, remove the document from the output tray. Reload the paper in the input tray with the blank side facing up. Return to the Pages to Print drop-down menu and then select Print Even Pages Only . Click OK to print.
    Reference link:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02250284&tmp_task=useCategory&cc=us&dlc=en&lang...
    Hope this helps.
    I work for HP.

  • My apple extreme wireless network is working fine with the macs but ios devices (iPhone & iPad) will not connect. I can see the network though. Everything was working until the ISP went down. Any suggestions?

    My apple extreme wireless network is working fine with two Macs but ios devices (iPhone & iPad) will not connect. I can see the network and it's telling me I'm connected but Safari says I'm not connected to the internet. Everything was working until the ISP went down. Any suggestions?

    Thank you, I've tried the support tips (resetting the network, checking security settings, etc.) and rebooting the network devices several times to no avail. I've actually been working on this for several days (when I can afford to have the network down).
    What I have to determine is what has changed in the setup...from when it WAS working just fine with all devices.

  • HT1212 itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the scree

    itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both  devices are connected ?

    Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both  devices are connected ?

    That does not involve iPhoto for the Mac in any way - try the iPad forum
    I will request your post be moved
    LN

  • I tried to export photos from iMac to iPad using a USB flash drive.  The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power.  Any ideas of what type of USB flash drive I should use?

    I tried to export photos from iMac to iPad using a USB flash drive.  The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power.  Any ideas of what type of USB flash drive I should use?

    You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
    I've had mixed luck with lexar, some work, some don't.
    I did have good luck with an older 4 gig geek squad one.
    Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
    For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work.

  • How to import video to ipad using camera connection kit

    how to import video from my camera to ipad using camera connection kit? only my still photos seem to import.

    I have a Kodak Zi8 and none of my videos came across during my sync as well? Haven't taken the time to check formats yet but looking for way to bring them over? Do I have to move to iMovie somehow?
    Message was edited by: NDZNO1

  • Asks me to connect ipad to computer to download new apps, unable on wifi?

    everytime i try and download new apps when connected via wifi, it asks me to connect ipad to computer, can't seem to download new apps straight to ipad?

    Not sure how this setting works, but do you have restrictions enabled on your iPad? I don't make use of the setting so I'm not sure if you would see that message in the App Store when you try to download.
    Go to your home screen, tap settings, go to general and check restrictions and see if you do have it enabled. If you use a passcode with your IPad you may have restrictions set up. But like I said, I really don't know how restrictions work with reference to what messages you would get on your iPad.
    Message was edited by: Demo

  • HT1386 Connected ipad to computer and downloaded 2 apps that aren't showing up on my ipad.  Says they are downloaded on itunes, but I don't see anything on my ipad. I have synced it several times. Am I missing something?

    Connected ipad to computer with usb and downloaded 2 apps that aren't showing up on my ipad.  Says they are downloaded on itunes, but I don't see anything on my ipad. Tried downloading AGAIN and it says the same thing. Downloaded but don't see them on the ipad. I have synced it several times. Am I missing something?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • When I connect ipad to computer and go to itunes, it will not show my ipad on the left-hand side on itunes page.  message on winzip says i need pro level winzip program.

    When I connect ipad to computer, itunes does not show ipad on left side of page.  winzip appears and says need pro version.  i have apple id, etc. and have dowmloaded music to ipad previously.  What do I need to do to get it to recognize ipad?

    Did you set the iPad up on a Mac? I set mine up on windows and my Mac wouldn't read it so I started over. Just a thought though, not sure if that's your problem.

  • How do i delete email from my iPhone,ipad and computer at the same time?

    How do i delete email from my iPhone,ipad and computer at the same time?

    Go to http://support.google.com/mail/bin/answer.py?hl=en&answer=77702. It tells you how to set up gmail on iPhone.  Then go to gmail settings then "accounts and imports" and add your AT&T POP email account  to import mail from AT&T to gmail

  • AutoCAD 2009 crashes when printing with HP Laserjet CP1525nw via wireless connection

    Printing to CP1525nw via wireless connection crashes AutoCAD 2009 on a WIndows 7 Home OS + Sony VAIO VPCL21M1E
    Works fine printing from any other application.

    I'm facing the same problem but, i'm AutoCAD 2012 and it crashes when printing with HP Laserjet CP1525n via USB or network cable

  • How to print with HP Deskjet 2510 with Imac G5 on Tiger ?

    Hi Folks
    I desperately need some helping hand....
    Today my old trusty printer died (HP 1510 print/scan/ copy) and I ran to buy another one because I need to finish some tax paperwork.
    In a mad hurry, I didn't pay any attention to tech specs and I went home with brand new HP DeskJet 2510 All In One device. But !!! : ((
    In my home office I still use Imac G5 with 10.4.11 which is still pretty good comp for office work but I found out that the HP 2510 don't officially support my Imac with Tiger. Only from 10.6 and later.... I know that Imac G5 can't run nothing above 10.5.
    So, is there any way to "force" HP 2510 to somehow recognize my Imac G5? In "about my mac" on USB port, the HP 2510 is visible ....
    Many thanks in advance.
    Cheers,
    Sven

    So, is there any way to "force" HP 2510 to somehow recognize my Imac G5?
    You may be able to get it to print with something like this:
    http://gimp-print.sourceforge.net/MacOSX.php
    although i do not see taht modle on the "Supported Printers" page. You might look again.
    BUT that workabout does not support scanning, only printing.
    I think you need to return the printer and look to either Canon or Brother. Brother especially has been better about suporting older Mac OS versions but you'll still need to get a model number and search the maker's site BEFORE buying to see if they show older drivers for download.

  • Cannot scan to computer with HP Deskjet 1510 due to missing scan icon ?

    Hi there,
    I have recently purchased a HP Deskjet 1510 series printer ;
    the installation of the drivers on my Windows XP laptop went well, however now when I double-click the HP Deskjet 1510 series icon on my desktop, the panel that opens up contains the PRINT icon but NOT the SCAN icon ..
    Does anyone know what I could do please ?
    Thanks for the help,
    R.R

    Hi Jamieson
    sorry for the late reply but I was away for a while.
    As per your advice, I've run the HP Print and Scan Doctor, but on the final screen, it says that it is "unable to find
    the HP scan application software on [my] computer".
    This is strange, considering that the installation software came out of the box from the CD..
    Screen captures here after:
    (I ran the tool twice, with the 2 different sources but got the same result twice):
    The Scan Doctor finally recommended me to download and install the latest Full Feature software from HP Customer
    Care:
    So I installed the latest Full Feature software, but when I ran it, the install failed (!).
    Screen capture:
    Right now, I can scan using mspaint, but I really would like to have the SCAN button in the HP panel.
    Do you think there is a quick fix, or should I give up looking for a solution and simply use mspaint ?
    Regards

Maybe you are looking for

  • Is it possible to set dunning level of cleared documents?

    We'd like to use dunning to report on 30, 60 and 90 days in arrears. It's easy to turn it on going forward. However, we'd like to process all our cleared items (BSAD) and set the dunning level on them as well if that's possible. Has anyone ever done

  • Technical Content Activation Failed in BI7

    Dear experts, Basically, I have posted this question in another category but the response is very disappointing. So I though of moving the question to here. I am using SAPKW70015 i.e. Release 15. I tried to activate Technical Content via SPRO's Activ

  • How do you change your name in "My Settings"

    I want to change the name shown when posting on this forum. I registered years ago using my real name. I have tried, but can't seem to figure out how to change it. Thanks

  • How to add a web gallery to Yahoo Sitebuilder

    I understand YS is not the ultimate tool  for creating a website - however it is what we have available and is what is used presently. Can someone please advise what type of web gallery is easiest to load into YS ( I do understand the basics of creat

  • Which product to develop new game on?

    I have Flash games that are in Flex but mostly as3 so it wouldn't be a big effort to move it to Flash CC. I'm planning a big update to the games (new graphics, animations, sounds etc.) to really bring them up to date. My initial target is Mac/Windows