Printing with HP Deskjet 3070

I use a multifunction printer HP Deskjet 3070A shared in WIFI between 3 PC, 2 under maverick and 1 under Microsoft.
Printing a document since the Microsoft PC works perfectly
Printing the same document since any PC under Maverick is distorted, the black text is printed shaded very clear, other colors are OK
I reset the printing system under Mavercick without succes.

Did you check the HP site for Maverick driver updates for your printer?  Not all Hp printers have been updated to support Mavericks.

Similar Messages

  • Two-sided printing with HP deskjet 1050A?

    Hi,
    How to complete two-sided printing with HP deskjet 1050A? I looked through the properties / options menu at print preview but no options were available for this function.
    Please advise.
    Thanks,
    Patrick

    Hello,
    You should be able to print on two sides using this method for your product:
    NOTE:You can print your document on both sides of the paper, instead of just one side. Click on the Advanced button on the Paper/Quality or Layout tab. From the Pages to Print drop-down menu select Print Odd Pages Only . Click OK to print. After the odd numbered pages of the document have been printed, remove the document from the output tray. Reload the paper in the input tray with the blank side facing up. Return to the Pages to Print drop-down menu and then select Print Even Pages Only . Click OK to print.
    Reference link:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02250284&tmp_task=useCategory&cc=us&dlc=en&lang...
    Hope this helps.
    I work for HP.

  • How to print with HP Deskjet 2510 with Imac G5 on Tiger ?

    Hi Folks
    I desperately need some helping hand....
    Today my old trusty printer died (HP 1510 print/scan/ copy) and I ran to buy another one because I need to finish some tax paperwork.
    In a mad hurry, I didn't pay any attention to tech specs and I went home with brand new HP DeskJet 2510 All In One device. But !!! : ((
    In my home office I still use Imac G5 with 10.4.11 which is still pretty good comp for office work but I found out that the HP 2510 don't officially support my Imac with Tiger. Only from 10.6 and later.... I know that Imac G5 can't run nothing above 10.5.
    So, is there any way to "force" HP 2510 to somehow recognize my Imac G5? In "about my mac" on USB port, the HP 2510 is visible ....
    Many thanks in advance.
    Cheers,
    Sven

    So, is there any way to "force" HP 2510 to somehow recognize my Imac G5?
    You may be able to get it to print with something like this:
    http://gimp-print.sourceforge.net/MacOSX.php
    although i do not see taht modle on the "Supported Printers" page. You might look again.
    BUT that workabout does not support scanning, only printing.
    I think you need to return the printer and look to either Canon or Brother. Brother especially has been better about suporting older Mac OS versions but you'll still need to get a model number and search the maker's site BEFORE buying to see if they show older drivers for download.

  • Thanks to hplip changes, I can no longer print with my Deskjet F4140..

    Hi. Ever since the upgrade of hplip, I've been unable to print. I searched the forums already and have removed hplip's entry from etc/rc.conf, as well as uninstalling the package. CUPS is up to date, but when I went through the "Add Printer" process, I couldn't figure out what the IP of my printer was. I clicked on the Network Printer link, but it didn't really offer any solid help. How am I supposed to figure out the IP address of something that's connected through USB?
    The error I received before I removed the printer through CUPS basically told me that the device wasn't connected and it would retry in 30 seconds. I checked the connection myself (USB) and it was fine.
    Last edited by xelados (2007-10-24 18:26:01)

    This is the result of an ls...
    xelados@sporkbox: /etc/udev/rules.d $ ls
    total 216K
    -rw-r--r-- 1 root root 220 2007-09-07 02:57 00.rules
    -rw-r--r-- 1 root root 82 2007-06-04 04:31 10-wacom.rules
    -rw-r--r-- 1 root root 86K 2007-10-22 13:31 53-sane.rules
    -rw-r--r-- 1 root root 59K 2007-11-09 01:06 54-gphoto.rules
    -rw-r--r-- 1 root root 206 2007-10-18 04:13 60-cdrom_id.rules
    -rw-r--r-- 1 root root 1.1K 2007-09-19 14:08 60-pcmcia.rules
    -rw-r--r-- 1 root root 1.2K 2007-10-18 04:13 60-persistent-storage-tape.rules
    -rw-r--r-- 1 root root 390 2007-10-18 04:13 75-cd-aliases-generator.rules.optional
    -rw-r--r-- 1 root root 2.1K 2007-10-18 04:13 75-persistent-net-generator.rules.optional
    -rw-r--r-- 1 root root 82 2007-10-28 14:55 90-hal.rules
    -rw-r--r-- 1 root root 201 2007-09-10 19:47 device-mapper.rules
    -rw-r--r-- 1 root root 21K 2007-10-24 04:37 udev.rules
    When I try to print a test page, the CUPS interface throws an error at me:
    "/usr/lib/cups/filter/foomatic-rip failed"
    And this is the information on the printer itself:
    Description: HP Deskjet F4140 with Scanner
    Location: Daniel's Room
    Printer Driver: HP DeskJet F4100 Foomatic/hpijs (recommended)
    Printer State: idle, accepting jobs, published.
    Device URI: usb://HP/Deskjet%20F4100%20series?serial=CN75I3T2QQ04TJ

  • Printing with HP Deskjet 1510 from wireless connected ipad using computer connected to broadband

    Hi,
    I am trying to figure out easy way to print any content from my ipad connected with wifi through xp computer to HP Desjket 1510,

    Hi Ieb_Fabulous,
    Welcome to the HP Support Forums. I gather you are trying to hook your Deskjet 1510 printer to your laptop with a wireless connection.
    This printer does not support wireless connectivity. I have included the Deskjet 1510 Printer Specifications for your reference.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Printing with HP Deskjet printer

    I have a HP Deskjet 812C printer, and I have connected it to my brand new MacBook. Everytime I try to print a document, it comes out with half of each line printed then shoots out about five extra pages with a little bit of printing on them.
    This printer worked fine for years with my iBook. I have never had this much trouble printing - anywhere. Heck, I could l print from my old iBook to my crappy Dell printer at work when the school's Dell laptop didn't even have the correct drivers to print on the Dell Printers, so this really gets me mad.
    I tried deleting the printer and setting up the printer again with the Printer Set Up Utility. No go. I checked all of my settings. No go.
    I have trouble printing from any application not just MSWord, so go figure.
    Is it a problem with the drivers that came with this new machine?
    Help, someone please!!!!!!

    I checked for a hp driver and the only one is this one http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj-13823-4 &lc=en&cc=us&dlc=en&product=58152&os=219&lang=en
    have a look at that and try that driver for osx and hopefully it works.

  • Problem in Printing with HP Deskjet F370 All-in-One Printer

    Product Name and Number: HP Deskjet F370 All-in-One Printer
    Cartridge Number: Black - HP 21 Black Inkjet Print Cartridge   (C9351AA)
                                       Colour - HP 22 Tri-color Inkjet Print Cartridge   (C9352AA)
    Operating System Installed: Windows 7 Home Premium (64 Bit)
    Hi,
    I am using HP Deskjet F370 All-in-One Printer. Recently I am facing a critcal problem.
    I am unable to print anything in red or brown colour.
    The cartridges are in good condition with more than 80% ink level in color cartridge and 65% above in black cartridge.
    I have done alignment of printer cartridges and also reset the printer.
    However after that, I have taken a test print which works fine. I can print in black or any other colour expect red and brown.
    Whenever I am trying to print anything in brown it is coming out in green colour.
    I don't know what to do....Please help.
    Thanks
    Suvadeep Paul
    Thanks
    Suvadeep Paul

    Hi there,
    This article should cover the missing colors you are experiencing. Give the steps located here a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Trouble printing with HP DeskJet 5850

    I am having a strange printing problem on my HP DeskJet 5850. When we print something, the last page comes out and then maybe the top 1/4 of the next page and then stops. The print monitor then shows an exclamation mark icon and the says that "Jobs Stopped". I can click to "Start Jobs" button and then the entire print job comes out normally.
    I have removed the printer and re-added it and it is still doing the same thing. I'm assuming it's a printer driver problem.
    When I got the computer, I downloaded the driver from HP. It's version 2.7.1 (I think). It wasn't until later that I noticed that updated drivers came with 10.4.4 (http://docs.info.apple.com/article.html?artnum=303057). It says that there is version 3.3 for my printer. However, I don't know how to update the driver to this new version. Plus, if I use the drop down menu to tell it which driver to use, I don't actually see HP DeskJet 5850 listed.
    How do I update the driver to this new 3.3 version? And why is it listed in the Apple document but I don't see it listed in the drop down list?

    It's not a network printer. It is connected directly to my Mac via USB.
    The funny thing is that if I print from Windows XP -> Mac -> printer, then no problem on same document where the problem occurs on my Mac. Therefore, must be a driver problem, or at least something on the Mac.
    So, my printer doesn't have an IP address. Any other suggestions that I should try out?

  • Problems printing with hp deskjet 4260

    hardware: macs with either 10.4 and 10,5, hp deskjet 4260 usb, printer software 9.7.1 (latest)
    hi, we have several mac under 10,4 and 10.5 printing on a hp deskjet 4260. none of them gives any trouble except one g4 with two internal drives. one drive no problems again but from the other drive i get following result.
    1) print job is started and ends
    2) printer starts printing but only in a about 25 size format (100% is checked) and stops after a few lines.
    3) green light starts blinking and only stops after restart of computer
    4) paper with few lines comes out of the printer
    i reinstalled printer drivers, repaired permissions, deleted caches, checked and compared size of hp folders with other internal drive. after reboot to second internal drive all prints well
    any idea ?
    tia

    thank you so much, you saved me a lot of trouble.
    I really did almost everything except resetting the printing system; (never saw the menu item) working with apple since 1986 you have learned me a new trick !!!
    below were created (after reset) so perhaps they caused the misprinting ?
    com.apple.print.PrintingPrefs.plist
    com.apple.print.custompresets.plist
    com.apple.print.PrintCenter.plist

  • Printing with HP Deskjet 6000 Wireless in Quicken 2010

    I cannot print wallet checks from Quicken 2010 on my new HP Deskjet 6000 wireless.  Reports work fine but checks will not print.  Any Help would be appreciated

    The issue is with Quicken, sorry.  Have you tried contacting them?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Printing with HP Deskjet 5552 under Lion

    Since upgrading to Lion I have been unable to print using my HP Deskjet 5552.  THe HP website advised resetting the print system and downloading new drivers.  I have done this and the drivers are in my downloads folder with file name hewlettpackardprinterdrivers2.7.2.dmg.downloads. This is not recognised by Installer.
    What do I need to do to install the drivers, and is it likely to resolve the problem?

    The Mac version of the  Linux HPIJS drivers worked for me on Mac OSX 10.7.2 Lion with my HP Deskjet 5552.
    I installed the following:
    hpijs-3.10.6.dmg
    foomatic-rip-4.0.6.230.dmg
    gplgs-8.71.dmg
    And then the printer was detected when I went to set it up
    (Just copying my post from the HP forum for you in case it helps.)
    Cheers, Dave.

  • Unable to do mobile printing with HP Deskjet 3050 All-in-one J610a (CH376D)

    I have a 3050 All-in-one J610a which I am using for about an year now.
    In the beginning I was able to print/scan using HP app (probably HP home & Biz) on my iPhone4 but for past few months i didn't use it but kept updating the app to the latest versions. Now, I have tried all HP apps available on itunes App Store but none of the apps are able to detect my printer even though my windows laptops (running windows XP and Win7) are connected with the printer over wireless network and printing seamlessly.
    I know my printer is not eprint or AirPrint compatible but am just trying for a regular wifi print sitting within the same network. After wasting about 6-8 hours trying to find a solution, I am posting this. Please help with any clues/ suggestions? 
    P.S. I am running iOS 6.0 on my iphone 4.

    You're right. I have tried everything like Hp Eprint, HP Printer Control etc. but it is just not able to find my printer. I tried ePrint Free from microtech and that provides an option to connect to a printer by entering it's IP and I was able to connect. But then this free app has very limited usability so can't rely on it completely.

  • Two-sided printing with HP Deskjet 960c

    My printer used to print two-sided just fine.  I had a jam and cleared it.  Now the software doesn't offer me the two-sided option any more. I reloaded the drivers, made sure two-sided printed was enabled under my printer settings, but still no luck.  Any suggestions?
    Doug 107

    doug107 wrote:
    My printer used to print two-sided just fine.  I had a jam and cleared it.  Now the software doesn't offer me the two-sided option any more. I reloaded the drivers, made sure two-sided printed was enabled under my printer settings, but still no luck.  Any suggestions?
    Try enabling the duplexer in device settings as discussed here.  If that does not solve the issue please indicate what operating system you have and what driver.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Print with laser printer

    Hi everyone,
    I'm developing an application that should print its JTexPane with 'Arial Unicode' font. I use a styled document. When I print with a deskjet, there isno problem ,my text is perfectly rendered.
    But, when I print with the laser printer, the text is always in bold. This printer doesn't accept 'Arial Unicode' in its properties. I have to be able to print unicode font (chinese, ...) and the printer doesn't have any unicode font in its settings...
    Is there anything I can do ?
    Thank you.
    Pascal

    I am also experiencing similar problems. I am trying to print a JEditorPane rendered HTML-document. On screen it looks good, but when sending it to either a PDFCreator or printer, bold and italic text looks really wierd. Does anyone have a solution to this problem?
    I can post some code or the PDF file if someone wants to see it.
    Thanks in advance.
    Magnus

  • Problems with hp deskjet 870 Cse and Win7 64 bit drivers

    I have been using this printer for years without problems. WinXP and Win7 working fine on my 32 bit laptop.
    Recently upgraded to a 64 bit laptop and the drivers installed just fine    however the danged thing doesn't print.
    Even the 'test print' job hangs in the print queue showing a print error. 
    Not sure this is related but,
    The Windows application log shows a bunch of error messages source 'Bonjour Service' at about the time I was trying on my 64 bit machine:
    Task Scheduling Error: Continuously busy for more than a second
    Task Scheduling Error: m->NextScheduledEvent 998
    Task Scheduling Error: m->NextScheduledSPRetry 998
    this cycle repeats over and over again
    Task Scheduling Error: m->NextScheduledSPRetry 13728
    I notice that many people have been having problems over the years with Win7 and HP printers. 
    I don't know whether to swear off of HP or windows. So far, I am just swearing AT them both.

    Hello bz2012,
    Welcome to the HP Support Forums!
    I see you are having issues printing with the Deskjet 870 since upgrading to Windows 7 64-bit. You could attempt to add the printer with an alternate driver.
    Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection.
    The printer driver you would more than likely be best to use is the 9800. Let me know if this allows you to print.
    Using the Print and Scan Dr may also be a helpful means of troubleshooting / resolving the issue. Let me know what the results are, what passes, fails, etc.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for

  • Desktop keeps freezing

    My laptop's desktop keeps freezing. All my icons become inactive and the only way I can access them is via the folders on my toolbar. Any advice? Also, my Internet explorer CONTINUALLY freezes up or takes FOREVER to load any data. I have been using G

  • Drill down arrow

    Hello, I would like to add a drill down arrow somewhere on the service call window (i.e. the UDF panel) that would open a (SC related) invoice number in another field. Is that possible and how do you do it? Any other suggestions to that effect are al

  • Setting up apple id account

    Attempting to assist a friend who is canadian to set up an apple id account on a new ipad mini she purchased in the US.  Problem? When entering credit card info, it will not accept the canadian credit card.  She purchased the mini in order to downloa

  • HT5037 I did this and iPhoto still will not open

    I get "you must upgrade iPhoto" and I do the steps and when I try to open iPhoto........I get the message again.  Did the upgrade too.

  • HT5694 I have lost my proof of purchase

    Hi, I have had my Mac book stolen & I can't find any proof of purchase, packaging etc. The Mac Book was purchased 2009 and I registered the Mac Book on the day of purchase. I have saved various bit of info, the Serial No: W8******7XJ Can you verify t