Printing with In Design CS4 only print left side,why?

How do I print a document in Design (CS4).  I have a 11x17 document (landscape) and when I send it to print it only print the left side (letter).   It is a newsletter so one 11x17 comprises 2 letter size pages.  I want to print them all but page by page by letter size only so we can proof read. 
I noticed that in the preview you can see only the half left side is highligthed for printing.   I tried to play around and Icouldn't.
Do you know why?.
Also when you send a document for the printing services, do you send in in 11x17 size? or letter size?
It is a 6 page newsletter.   One 11x17 both side = 4 pages and One insert 8.5 x11 both sides = 2 pages
Thanks,

If your page is set up as 11 x 17 and you try to print to letter-size paper yoou'll need to enable tiling to get both sides.
The correct way to set this file up is as lettersize facing pages (and they should be set in consecutive order, as the reader will see them). Imposition for printing is done at print time. If you are required to provide the imposed spreads (and no printer worth their salt should be asking for this), you can place the pages from the original file into a new 11 x 17 document in the correct order. Your insert will probably also print as 11 x 17, just half as many sheets with two copies per sheet, then get cut apart and inserted.

Similar Messages

  • Purchased ringtone  iphone 4 that is not in my itunes library when i click transfer purchases from it appears in the tones library but in a paler shade of print with a dotted circle to the left of it when i take any action it disappears

    have purchased ringtone on iphone 4 not in my itunes library when i click devices, transfer purchases from, it appears in tones in my library but in a paler shade of print with a dotted circle to the left of it, if i try to click on it or take any other action it disappears and leave a blank space i have tried this several time i want to transfer library to my new iphone 5 but i will loose the ringtone

    I had the exact same issue!! Seriously p*ssed me off when I checked out my ITunes purchased items (via my computer) and noticed that most of the additional tracks listed on my IPhone playlist was listed there too. However, I never authorized any purchases!!  (I have actually written Apple Support asking for a full refund of all tracks listed on my purchased list)
    Be careful when you swipe your finger to the left/right on those "additional" tracks on your IPhone playlist... I'm pretty sure that the cloud symbol is an option to download or automatically buy those tracks.
    Solution for the problem:
    1 - go to your IPhone settings
    2 - choose "iTunes & App Store"
    3 - go to "Show All" & "Music"
    4 - turn off "Music" by moving the bar to the left (it should be a white color once you turn it off)
    Should solve your problem :~)

  • When I print on photo paper it only prints in black and white. How can I fix this?

    When I print on photo paper it only prints in black and white. How can I fix this?

    Does it print correctly on plain paper?
    What do you do differently to print on Photo Paper than to print on plain paper?
    iPhoto has no idea of what paper is being printed - that is totally a function of the printer and the print driver supplied with the printer - you need to look at the printer specific options and your printer manual and/or support forums
    LN

  • How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    If you have not already done so, your chances will really improve if you....
    1) Connect the printer to the USB port on the AirPort Extreme
    2) Download and install Bonjour Print Services for Windows on the PC

  • Lightroom 2.5 not printing with main account user but prints with a new use

    I have been troubleshooting all day. My new epson r280 is not printing with LR2.5 though it prints in other applications fine. Called epson and we are sure that I have the latest drivers, etc. Called Adobe and they had me create a new user in accounts in system preferences-accounts. When I tried printing from the "test user" LR printed with my epson printer. Adobe said the problem was with my system permissions and I had to reset my system permissions. This doesn't sound right to me. I ran disk utility and repaired my permissions but LR still doesn't print using my original user. Genius Book suggests going to Library-Preferences and to delete the plist. Does this sound right? And do I delete the p-list for LR or for the epson printer? What happens when you delete a p-list? Will I lose my catalog in LR? I would appreciate any help on this problem.

    Just trying again to see if anyone has any solutions for this question. Thanks

  • When I print, a last page is printed with a summary of document printed - file name, directory, ...

    When I print, a last page is printed with a summary of document printed - file name, directory, ... Just got Windows 8. Is this something I can stop? Waste of paper and ink!!

    Hi RebeccaQ,
    Generally speaking, a summary page, document summary or document properties page is often generated based on a setting in the software application being used as opposed to the printer driver or menu setting.  For example, in MS Word you can select to print this page with each printed document.  In this case, depending on your version of Word, you can enable/disable the feature often in "Word Options", "Display", "Printing Options", "Print Document Properties".
    Does this help?  If not, which printer model and software application is being used when the summary is printed? 
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Cannot get printer to print with my iMac but will print from my dell laptop?

    cannot get my printer to print with my imac but will print from my dell laptop?

    OK, well you haven't provided any information so there isn't anything we can do. What is needed at the bare minimum is:
    Exactly what printer are you referring to?
    How is it connected to the iMac (USB, Wi-Fi, etc...)?
    What steps you have taken to connect the printer?
    What errors you have run into.
    What I would recommend is using Apple's Printing Overview OS X Lion to learn how to install it. Also take a look at Printer and scanner software for Snow Leopard & Lion to see if it's even compatible with Lion.

  • I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

    I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

    Hello:
    I must apologize  .  I should have checked here first:
    http://support.apple.com/kb/HT3669#HP
    According to the list, there is no driver for your printer included in OS X 10.7.
    There are a couple of options:
    1.  Contact HP to see if they have a workaround.
    2. If the model of printer is not listed but your printer is a PostScript printer or PCL Laser printer, try the "Generic PostScript" or "PCL Laser printer" drivers.  Generic printer drivers may not let you access all the features of your printer.
    I have not tried #2, but some people have had success.
    Barry

  • Is it possible to get the style, font and related info of a paragraph of a in design file and write it on the same in design file  on the  left side

    Is it possible to get the style, font and related info of a paragraph text  of a in design file and write  all the stuff on the same in design file  on the  left side with small fonts 
    as
    Lets  this is a text in in design file    :
    style : abc                      we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultur we are going to check the  condition  Agence Wallonne pour la    font 12                                  d'une Agricultu we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultu
    style : xyz                      we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultur we are going to check the  condition  Agence Wallonne pour la    font 10                                  d'une Agricultu we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultu

    Hi Poojith
    Not sure if this would solve your requirment but just in case might be helpful:
    1. We can mix up the HTML and HTMLB components in the JSP Page. However, can access only the HTMLB components in the controller. The following link refers to what customizations are offered by the HTMLB framework:
    [http://www.sapdesignguild.org/resources/htmlb_guidance/]
    2. Another option would be to use AbstractPortalComponents or a simple web app if that's feasible. (where custom UI themes, css and layout are more in control of the developers.)
    Thanks
    Deepak

  • HT1386 This article seems to be based off of an older version of iTunes. With iTunes 11 I have no left side column. The screen shot is not what is on my computer with the latest version of iTunes.

    This article seems to be based off of an older version of iTunes. With iTunes 11 I have no left side column. The screen shot is not what is on my computer with the latest version of iTunes. I need help putting music and pictures on my new iPad from iTunes, the new iPad and latest version of iTunes. Thank you.

    On iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC - it should then look similar to that article.
    Syncing music : http://support.apple.com/kb/HT1351
    Syncing photos : http://support.apple.com/kb/HT4236
    Note that synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync - so you need to include all the photos that you want on the iPad from your computer in each photo sync.

  • When using headphones, only the left side works, HELP?

    When using headphones, only the left side works when plugged into the macbook. I've tried 3 different working pairs of headphones and different media types and nothing seems to fix it. HELP?

    Hi atgoetz,
    Usually this is indicative of a bad headphone jack on the machine end, especially if you've tried three different pairs of known good headphones. Unfortunately there's not much you do to resolve the issue, externally. Considering it's a new machine no sense trying to fix something and making it work. I'd reach out to AppleCare for service on the unit and if it's brand new, possibly arrange a replacement unit.

  • Can I print with a black cartridge only? HP Deskjet 3520

    Hi everyone,
    I just bought a new black ink cartridge for my printer, assuming that I did not need to replace all the colors since I only want to print in black (shipping labels and such.)
    Well, it only prints in a grayish shade now!  The ink levels on the colored cartridges are low, and the black ink is high and brand new.  So WHY can I not just print in plain old black?
    What am I doing wrong?
    Thank you so much for your help!

    The post here has links to a troubleshooting document for the Deskjet 3520.  If the steps there do not resolve the issue please call HP Support, even if the printer is not longer under warranty.  In the US or Canada call 1-800-HPINVENt, elsewhere see the document here for contact information.  If the above does not give satisfactory results then please post back here and mention what country you are located in..
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Can't print with airport usb connection only

    i have spent the last 3 days searching for help to fix my problem - PLEASE HELP!!!
    using:
    imac osx 10.6.8
    canon image class mf8350cdn
    airport extreme base station
    I cannot seem to print wirelessly with my imac using just the USB connection on the airport router.  I can print with the printer locally when it's "hardwired" directly to a usb on the back of the imac.  I can print if i connect a cat5 network cable from the printer to the airport. i can print wirelessly with a PC when the printer is connected with a usb to the airport.  i just can't do this with my imac via the usb connection on the router.  my error message is a Canon CMFP Printer Driver telling me printer is not responding - check the power.....try sending again.
    I believe i have tried everything!!!  While i am newer to mac and not the greatest at networking, i have manipulated every setting to match up with all of the online help i can get (trying to not have to send this question!!) and no luck.
    i have deleted printers and jobs, reinstalled everything, i changed the cable, downloaded the latest drivers from canon and apple, i updated the firmware on the printer. i even reinstalled my osx and confirmed all is updated on my imac.
    i don't want to scan or fax this way - so that is not my issue -- it's just plain old printing using that usb port.
    i need all of my other ports on the airport for other things, so i cannot sacrific this one for printing - i just want to use the usb as my printer connection to print with all of the machines i have.
    hope my question makes sense and that someone will take the time to give a reply.
    thanks!!
    p.s. the closest discussion that matches my issue seems to be this one:
    https://discussions.apple.com/message/12367897#12367897
    but, i still can't seem to get there..........

    The most comprehensive set of troubleshooting instructions for printing problems involving Airport printers is found at:
    http://docs.info.apple.com/article.html?artnum=107418
    It is possible your printer simply cannot be made to work in this manner, and is more often than not a problem with multifunction printers.

  • Printing to printer on windows xp computer, only prints first page

    hey all,
    I need some help. i just switched to a mac and I am loving it, but in my small office, I am having trouble printing. Two printers are connected to a Windows XP computer. I can connect to them via the network and print, but it only prints the first page...Any ideas on how to fix this problem?

    Hello Cate_B and welcome to Apple Discussions.
    The CIFS host error message is often a result of the Mac not being able to resolve the Windows computer name. This would be confirmed by the fact that when you selected Add Printer > Windows, your mums computer did not appear after selecting the workgroup. A solution could be to check what workgroup name is set in her Windows and ensure your Mac is set to the same workgroup name (set via the WINS section of the Advanced network settings.
    For an easier fix you could try the SAMBA method again, but this time I suggest you try the following syntax.
    smb://IP Address of Mums Computer/Sharename
    Some other things to check...
    1. Make sure the printer is shared by mums computer and ensure a guest can access it.
    2. Ensure the share name is short (about 8 characters) and contains no spaces.
    3. Check that your Epson driver will work when shared by a PC. Some Mac printer drivers will only work when connected directly to the Mac via USB (this is the case with a number of Canon drivers). In this case, you need to use an alternate driver based on CUPS, such as the Gutenprint driver set. These will work across a network and a cross-platform share.
    Hope this helps you...
    Pahu

  • Printing with a LED Colour Laser Printer - No CMYK support?

    Greetings.
    I bought an Oki A3+ printer (C9655) three weeks ago to output a large amount of images for the editing and proofing of a book project. The results I am getting are pretty bad as Lightroom cannot see their profiles so they cannot be loaded (they can be seen & loaded in Photoshop CS3 or InDesign CS3). Their technical support is saying that Adobe Lightroom doesn't appear to support their profiles which are CMYK. Although the results are pretty good via Photoshop or InDesign, I really don't want to have to import 100's of images into another app just to print a decent quality preview hard copy.
    What I expected would be straightforward in printing whatever DNGs I select from a collection via the Print module is apparently not possible.  Is it really true that Adobe won't support CMYK in Lightroom? And if so why?  There are threads requesting CMYK support that go back to Lightroom 2 Beta.
    What about printing cards on thick board? What about printing a preview of a book project? It doesn't have to be inkjet RGB all the time. (Admittedly quality really looks "photographic" on inkjet but at too high a cost for previews).
    LED Colour laser printers like the one I bought using 4 blocks of toners are becoming more accessible & popular.  Surely there will be an increasing amount of users who expect like I do to be able to output directly to the printer without convoluted workarounds.
    Adobe, could you please get Lightroom to talk to Colour Laser Printers that work in CMYK and manage the colour? Getting the printer to manage colour really gives poor results. The colours are pretty good but the shadows and blacks seriously lack density making the result just unacceptable. I am frustrated I have not been able to do the outputs I bought the printer for and it appears that the solution lies in Adobe supporting CMYK outputs.
    Any help would be greatly appreciated in getting a solution soon.
    Thanks.
    (Mac 10.6.8)

    Thank you for your prompt response Andrew
    Please forgive me if I wasn't clear. I don't actually have any CMYK files in my catalogue. Nearly all my files are DNG's that were imported from RAW (if they are edited in Photoshop, it's usually in ProPhoto RGB). What I want to do is output collections directly from Lightroom to paper on the Oki. With hundreds of images to print, I really don't want to use Photoshop. The way I understood it, the printer needed CMYK data to be able to print an image but I think I got it wrong (maybe because Oki only supply CMYK profiles?).
    From what you say and from looking at the printer settings options, there must be a way to get Lightroom to send data over to the Oki in a language it fully understands (which I think is by letting the Printer manage colour). I have experimented with different options in the Printer settings, but so far all the results are wrong. I'm now looking at loading profiles in the "Graphic Pro" settings. It looks like they need to be loaded with an installer app and it looks like the only way to be able to use them is by storing them on the printer - which unbelievably means paying over £300 for their hard drive!
    Hopefully there is a simpler solution. I'm getting the impression the printer has great capabilities but I'm missing out on them because I can't work out how to get the settings right. What I thought would be pretty straightforward (printing a preselection of images from Lightroom) has turned into weeks of complication and frustration.
    If you have any more advice to spare, I would be delighted to read it!
    Thanks again.

Maybe you are looking for