Printing with Kodak ESP7 and BT infinity

OK,
So I have had my macbook with OSX lion 10.7 for a year, and also my Kodak ESP7 printer. This was fine. Connected wirelessly and printing was good. In December we upgraded our wireless to BT infinity from BT homehub. Since then my macbook cannot find the printer at all. Both are connected to the wireless network and showing 100% connection.
If I connect the printer via USB it appears and I can print, but this is not the ideal solution for me based on my printing needs.
I have uninstalled and reinstalled the printer. I have turned everything off and on again and restarted.
What can I do to fix this?

The printer is optimized for HP paper with the default settings/options. To print decently on other types of paper, the printer settings need to changed manually. The document found at this link should help you with this:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00219778&lc=en&dlc=en&cc=us&lang=en&product=115...
Hope this helps you out.
Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Similar Messages

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

Dunning letters printing with zero balance and no invoice listing

How to trouble shoot 'Dunning letters printing with zero balance and no invoice listing' problem

As per my understanding it could be due to OB22 settings.
refer following SAP notes
335608,191927,
373296

PDFs printing with black background and white text.

For some reason some of our PDF's have been printing with black backgrounds and white text, even though they appear to be normal on the screen before they are printed. I haven't been able to confirm 100% yet but it appears to only be happening with pdfs that were created from scanned documents.
Can somebody please offer me some suggestions.

Absolutely agree with the original poster. I find white text on black background so very very difficult (I changed from using Tweetbot on iOS to Tweetlogix for this very reason) and it physically hurts my eyes to try to read it. I can just about manage with Spotify using white text on a black background on the large screen of my MacBook Pro - and I do mean "just" - but for the smaller screen of my iPhone 5 it is just impossible. Even with a retina screen such as that on the iPhone 5S there is a strange ghosting effect and it gives me a headache to look at it for too long.
This may be something to do with age! I suspect most app developers are youngsters with almost perfect eyesight, but for those of us whose eyesight is less than perfect, this white text on black background really is so very difficult.
I know there is a workaround in setting the iPhone to invert ALL colours (under Accessibility in Settings) but it's a real pain to have to keep altering this setting every time I want to open or close Spotify, and it doesn't look right anyway. iOS7 is supposed to be a light, bright, easy to read OS - sadly this new Spotify app is the opposite of that.
Please would Spotify consider adding a simple light or dark theme option, so that those of us who want it can have our much easier to read light background back again, with grey or black text? It would be a great help to those of us who have eyesight problems.
If not, I may have to cancel my Spotify Premium account and move to Deezer instead, as I mainly use Spotify when out and about in the car, so am using the iOS app a lot.
Thank you for considering this plea!

Trouble printing with Epson 2880 and SL

Installed SL on my MBP but not my iMac yet as it is my main computer for printing with Aperture. I have been very happy with the 2880 and how well the prints match what I see on the screen (calibrated with i1d2). Well with SL I downloaded rosetta and the new 2880 drivers (as instructed by Epson), but whenever I choose a paper profile e.g., Premium Photo Glossy, the picture in Aperture Print Pane turns a purple hue. I, of course, have color management turned off in the Print Settings dialog. Anyone have any idea what is going on? As far as I can tell I'm not doing anything differently. More importantly, has anyone been able to get good photo printing with SL, Aperture and the new Epson drivers for the 2880 or similar Epson printer?
Thanks, Jim

That KB article just saved me from going back to 10.5. I was having the same purple problem with all Ilford and Hahnemuhle profiles.
That problem is now gone (by just disabling Black Point Compensation) but: when trying to print from Aperture (2.1.4) with my R2880, any paper I choose is apparently stuck at +roll paper+, giving a +wrong source+ error when it reaches the printer. I now have to hit preview, select the correct page setup and profile and print from there. So far this seems to work. But it's a pain and not what I want to be stuck doing for very long.
I had this problem before but only when printing to Manual-Roll. Now even Sheet Feeder options don't work. This would all be fixed if we only had a proper Page Setup option in Aperture as in every other OS X application...
At least that convoluted method gives me the right colors - which I was definitely not getting by going the system managed route.
Growing pains anyone?

Problems with borderless printing with iPhoto '08 and HP Photosmart Printer

I am trying to print borderless 4x6 photos on HP Photosmart C6250 (same as all HP C62xx Photosmart printers). I am using the HP 4x6 photo paper with the perforated tab. When I select the paper size, I specify Borderless 4x6 in/10 x15 cm (tab). According to the printer manual, the tab should be facing out. I have tried printing with tab out and the tab in. With tab in, it printed the picture leaving white space at the other end equal to length of tab. With tab out as printer specified, it left a white gap at beginning of photo (not as wide as tab) and printed the photo over the perforated tab.
Anyone else figured out how to print using the 4x6 paper with tabs. I also tried printing from the HP software included with the printer and it has issues, too. So, it might be an HP problem, or is it maybe a Mac printing issue with this printer.
Thanks for any help!
Barbara

Barbara:
This is a shot in the dark but take a look at the following topic. It might just help. As they say, any port in a storm.
Topic : iphoto won't print properly to HP photosmart
It does seem like a bizarre solution however. Good luck.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Cannot print with Cannon LBP5000 and Timecapsule

So I've read that the Cannon LBP5000 is not compatible after all with Time Capsule. Due to the CAPT Driver being bi-directional. I do not accept this as a resolution and feel that Apple cannot simply push this aside. My reason for that is this.
I was printing fine, with both my MBP and Air via a USB cable to my Cannon LBP5000 - great.
I then decided to go wireless printing. And bought a HP 2101nw print server for £30. I could then print wirelessly - fab!
I then decided to upgrade my MBP to Lion. I then could no longer print on that machine. Air still fine - pants.
I then had to (for other support reasons) upgrade my Air to Lion, to fix something else. I could no longer print from their either - bugger.
After much passing of bucks and research, I found out the HP 2101nw driver is not Lion compatible, nor do Apple or HP have any intention of fixing that. I was told to discard that wireless print server for something compatible with Lion - cheers.
I then bought a 2TB TimeCapsule. And found I couldnt print from that either for the lame reason I quoted at the start.
If this print worked wirelessley with a £30 print server on Snow Lepoard, why is it acceptable for it to not work on a £249 device. The printer hasnt changed, but it seemed a £30 solution is able to handle this 'Bi-Directional' impediment where the mighty TimeCapsule gives up.
What a load of tosh - really, really unimpressed Apple. Take ownership and responsiblity for something for once and fix the exceptionally painful transistion you pushed us through with Lion.

Hi I use windows and the Reader version I have is Adobe X1. And yes - I cannot even open Adobe Reader and yes I reinstalled it.
From: Sara.Forsberg <[email protected]>
To: Verla Adams <[email protected]>
Sent: Thursday, April 16, 2015 7:28 PM
Subject: all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
created by Sara.Forsberg in Acrobat Reader - View the full discussionHi verlaa73828618, It sounds, then, that you can't even open Adobe Reader. Is that correct? What version of Reader are you currently using (and are you on Mac OS or Windows)? Have you tried reinstalling Reader? Best,Sara If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7446005#7446005 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7446005#7446005 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Printing with HP B9180 and Photoshop Elements 8 and Color Management

I've got a bit of confusion about certain settings in the printing process and I've posted a rather long discussion of my 'issues' and confusion. I hope someone can give me some guidance here. I've seen a lot of these issues addressed in many places but I can't seem to find an integrated response. Thanks to anyone who takes the time to read and respond.
Color Management Questions
My problems started when I was getting pictures that were too dark from my HP 9180 printer after having gotten very nice prints for a long time. I had obviously started to do something differently inadvertently. The only thing I think that is different is that I got a new 23 inch monitor, which does produce much brighter on-screen images. So, I started to do some research and know just enough about color management to be slightly confused and have some questions that I hope someone can give me some help with.
Equipment Background
I use both a Canon 20D and a Canon PowerShot SD600 camera. Both have the default color space as sRGB, although the 20D can be also set as RGB.
I also use Photoshop Elements 8, where there are a variety of settings possible for printing.
My monitor is an HP S2331, whose color space is sRGB and cannot be reset to RGB (I think) except for temperature; the default is 6500K.
My printer is an HP Photosmart Pro B9180 Printer, where there are also a variety of settings possible.
I’m running XP-Pro.
Here’s Where I Get Confused
Everything I have read about color management (various web sites, forums, books, etc) says to have the image, monitor, and printer all in the same color space.
Everything I read about PSE 8 (same sources) says to set PSE 8 to ‘Always Optimize for Printing’ under Edit>Color Settings in order to get the best prints. This displays photos based on the Adobe RGB color space.
I am taking pictures in sRGB, and telling PSE 8 to process them in RGB by selecting ‘Always Optimize for Printing’. Is this something I should be concerned about? Should I reset my camera for RGB?
Further, by selecting ‘Always Optimize for Printing’, I am setting PSE 8 for RGB while my monitor displays sRGB. Is this an important issue or is it also much ado about technicalities that an amateur should not worry about? It does violate the ‘keep them in the same color space’ rule.
Next, when I go to File>Print and get the Print window and then do the Page Setup and Select Printer, I then go to More Options in the lower left of the window. Under the More Options window, I select Color management and select Photoshop Elements Manages Colors. Next, there is Image Space, which is fixed and not subject to selection from a drop down menu.
I understand that this is the image space of the image I took with my camera and that information is embedded in the image. Correct?
Next, there is Printer Profile. But, from what I have read, this is where the IEC profile of the paper being printed on is supposed to be selected, isn’t it?
Shouldn’t this more appropriately be called Paper Profile, or Printing Media Profile? Further, this drop down menu appears to be somewhat erratic, sometimes showing all of the paper profiles I believe are loaded, sometimes not. It also shows listings such as Working RGB-Adobe RGB (1988), Adobe RGB 1988, Dot Gain 10%, 15%.... along with a lot of paper profiles. Aren’t those profiles unnecessary here?
I’ve used both Relative Colorimetric and Perceptual Rendering and am happy with either one.
Next, when I go to Printer Preferences, in order to “…disable color management in the printer preferences dialog”, under the Color Tab, I select Application Managed Colors from the Color management drop down menu, and also have the option of selecting ColorSmart/sRGB and Adobe RGB (1988).
Is there any time when I should use either ColorSmart/sRGB or Adobe RGB (1988)? If I were staying with my camera’s sRGB setting, given the fact that the monitor is sRGB, would the appropriate selections be ‘Printer Manages Colors’ and ‘ColorSmart/sRGB’?
Finally, under the Features Tab, I go to look for the same paper I selected under Printer Profile (Question 4 above). If it is one of the pre-loaded (by HP) profiles, it is there, but if it is a profile I downloaded, say for an Ilford paper, it isn’t listed, and I need to guess at an equivalent type of paper to select.
Is there any way to get that listing to appear under the Paper Type drop down menu?
I know that this is a long post, but it helped me to clarify my ‘issues’. Thank you for any and all suggestions, answers, guidance and help.

RIK,
Some printers have long names, esp. HP printers, and PSE gets ":confused." In control panel>devices and printers, right click on the default printer, go to printer properties, and rename the default printer to something short, e.g. "Our Printer." That may fix it..

Networking printer with HP Laserjet and Linksys wired print server

I have an older Laserjet 4 Plus that is networked via a Linksys 3-port wired print server.
My Windows-based PCs print to it fine but I can't print with my iMac. It gets there but gets an error at the printer and never prints.
I'm new to the Mac world as of 6/16 so am still learning.
Thanks for the help.

Paul, I am amazed you were ever able to print via the Linksys wireless server on your mac. I have the identical router and print server, and only the Windows PC's on my wireless network have been able to share the printer on that wireless server. I've been unable to find a driver for my iMac, and could never get the iMac to find the server. Finally gave up and bought an HP 2600n color laser and connected it directly to the iMac via USB. You're right about lack of help from Linksys. There is an Apple folder under "unsupported" on the print server installation CD, but there's nothing helpful in there.
iMac (Intel) Mac OS X (10.4.5)
iMac (Intel) Mac OS X (10.4.5)

Is there a setting to make a PDF print with no background and black text?

I made a nice booklet that has colorful blocks in the background and sometimes white text and sometimes black text. We are not going to print it, it is just going to be a PDF on our website. Can I set it up so that it always prints without the backgrounds and makes all the text black?
I just don't want people to have to print huge fields of colr if they end up printing this out on a little ink jet with expensive and finicky cartridges...
BT

There are is no as such specified setting for customer or reader printer, because it depends on the printer setting of customer. However, you can mentioned that, if any one want to print book as black text, follow this setting http://helpx.adobe.com/acrobat/kb/print-black-white-acrobat-reader.html

How to change pdf (with dark background) so it print with white background and dark text??

I have lots of nice presentations I am studying- the problem is most of them were made in ppt with dark backgrounds and white text then converted to pdf files. So when I print them, I get a dark (black) background with white text- very annoying. Is there anyway to get it to print with a light (or no) backround with black text? This is much easier for note taking/etc. I have adobe acrobat professional.

Use the rectangle shape tool. Draw a rectangle over the entire frame. In the shape tab, color it whatever you want. Export your TGA sequence.
Andy
PS: But if you place a colored bkg in your motion project that you will effectively have no alpha channel. Are they referencing the TGA's alpha?

Printing with IPP (SSL) and job user names

Hi,
Environment: Windows 2008 R2 Servers, WIN 7 and WIN 8.1 clients, all 64 Bit
I setup a printing environment including a FollowYou solution. To realize data encryption from end2end, we decide to use IPP over SSL for Printing. Everything works fin, IIS is installed, all certificates are in place and the necessary clients are enabled/
installed.
Because of the FollowYou solution, i need the origin user who sent the Job from his client via the print server to the printer. Thats where my problem is. I tried three ways to print from the client: SMB, IPP and IPP over SSL. Just if i use SMB, the username
is transferred correctly with the Job and can be seen in the job list in the stopped printer queue. Neither with IPP nor with IPP over SSL the jobname is coming with the job (i see nt authority/IUSR instead).
Is there something i can do to see the username within the job using IPP?
Thanks and regards,

You have posted your question in a user forum dedicated to Project
Server/MS project.
Also, looks like you have posted this question
here and got some answers. If anything, that is the correct forum to post further quuestions.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Why can't I print with an HP and a mac using PSE9

Why can't I print using an HP printer and a mac with Mountain Lion and PSE9

HP printers tend to have long names. Try renaming your printer to something more simple.
Click on System Preferences in the dock or from the menu after clicking the apple icon (top left)
Under Hardware choose Print & Scan
Right-click or Ctrl+Click on your HP Printer and choose rename printer
Type a new name e.g. My Printer (you can also add a location if you wish)
Then click OK

Scanning with Kodak i65 and Vista

Hi,
I am having trouble 'Creating a PDF from Scanner' with a Kodak i65 scanner. Everytime I attempt to scan a document with Acrobat 8 and Vista I receive a scanning failed message. The 'Scan Validation Tool' scans documents fine to the .tiff format however when I try to scan documents with Acrobat 8 it doesn't work and I get 'Scanning failed.'
Any help would be greatly appreciated.
Thanks,
Andrew

I have the exact same problem. Except I have the Kodak i30 Scanner. I have Adobe Acrobat Professional 8.1.2 (with the Security Update 1 installed).
In the past, I ran the following configurations on an older computer with no problems:
- Windows XP & Adobe Acrobat Professional 6.0 (with all of its various updates)
- Windows Vista & Adobe Acrobat Professional 6.0 (with all of its various updates)
- Windows Vista & Adobe Acrobat Professional 8.1.2 (with the Security Update 1 installed)
However, when I built a new computer, installed Windows Vista Ultimate, installed the Kodak i30 Scanner, I receive a "Scanning failed." error everytime I try to scan directly into Acrobat.
BTW, I HAVE "tried with latest Scan Validation Tool and firmware update from Kodak site." Updating the SVT and firmware neither helped nor hurt.
Has anyone had a successful fix to this issue?

PDF prints with little boxes and question marks

I prepared a document in Microsoft Publisher 360 and created a pdf with creative cloud.
Looks great and prints great for me.
I emailed it to a few people and it looks great on their screens. However, when they print it,
it comes out with little boxes and question marks.
If I email them the publisher file it is fine.
How I can get them the PDF file without all the odd markings?

You probably used a font that is not on their system and did not embed the font in the PDF when you created it. Don't feel bad. We all have done it. Just make sure to embed your fonts in the Joboptions settings before you recreate the PDF.

Printing with Kodak ESP7 and BT infinity

Similar Messages

Maybe you are looking for