Printing with Macbook Pro over wireless network and PC.

I just got my 17" Macbook Pro and this is my first Mac. I was using an Alienware laptop before and I was printing through the PC desktop in the bedroom hooked to a Epson printer thruogh a USB cable. I was curious if it is possible to set the Macbook up so that I can print through the PC. As far as I know Virtual PC isn't universal and only works with the power pc powerbooks, g4, g5, and etc. If someone could help me find the best alternative at the lowest cost I would greatly appreciate it.

I found system preferences but once I get there I
can't find the internet and network.
wait. in the System Preferences window, the third row down should be "Internet & Network"... the second icon from the left should be "Network".
are you saying you don't see the Network icon?
I clicked show
all and it doesn't add anything.
correct that's just a "return to the main menu"-type thingy - i.e. if you click on "Appearance" from System Preferences window, and then decide that you want to go back to the System Preferences main window, you'd just click on "Show All"
What am I missing?
I'm brand new to OS X.
well, i don't think you need Virtual PC... but i think we should first figure out why you're not able to get to the network setup section of system prefs....
cheers

Similar Messages

  • IMac does not recognize MacBook Pro over wireless network

    Hi,
    I have an iMac running MAC OS X version 10.5.7. It is connected to the Internet via an Airport Extreme Base Station. I just bought a 13-in MacBook Pro that runs the same version of MAC OS X. I connect it to the same wireless network. The MacBook Pro recognizes the iMac (there is an icon of the iMac in the Shared Section of the Finder window). The iMac, however, does not recognize the MacBook Pro. If you have come across this problem and have a solution, I would be most grateful for your advice.
    Regards,
    MTL

    I'm having a similar problem with an Intel iMac and a G4 iBook (both running Leopard 10.5.7) since the recent replacement of the iMac's hard drive. Occasionally the iMac will 'see' and allow me to connect to the laptop, but often the connection just drops out, and then I can't find the iBook any more. The iBook, on the other hand, can't detect the iMac at all. I know I have all the settings right - before the HD replacement, everything worked fine in both directions. Interestingly, in the 'WINS' settings in network preferences, the iMac's 'name' bears no relation (just a list of numbers and letters) to the computer's actual name, while the iBook uses the first word of its own name. It's frustrating, as I have to synchronise my work between the two on a daily basis. I can't get them to connect via ethernet cable either.

  • I am sharing my macbook pro over a network with windows 7, however through windows 7 I can access my whole computer instead of just the shared files!

    I am sharing my macbook pro over a network with windows 7, however through windows 7 I can access my whole computer instead of just the shared files!

    Hi Sig,
    The issue is that i only want the shared folders to be accessed through windows 7.
    Whats the point otherwise to have shared folders?
    thanks..

  • Can I use Dell AOI 922 printer with MacBook Pro?

    Can I use Dell AOI 922 printer with MacBook Pro?

    Cisco:
    Very helpful!   My set up was Mac/ Lion trying to Print off a Dell Photo A10 922
    Lion does not store any Lexmark, nor dow Apple, but I went to the lexmark site, and found this-
    http://support.lexmark.com/index?productCode=LEXMARK_X5270&page=product&locale=E N&userlocale=EN_US#1
    Downloaded that, then hooked up the printer, Cmd-P, and the Mac found the drivers I had loaded.
    Works fine.  Now when I go to my sisters, I can print!
    byw, I'm probably just a Level 2  "GIYF"er, but your the only one ( of MANY folks) who thought to search Lexmart. I've seen posts by MANY geeks saying a Mac could not print to ANY Dell printer.
    Nice job,
    Rich

  • Poster printing with MacBook Pro

    How can one print posters with MacBook Pro? For example, 16 A4 pages to tape together.

    I found system preferences but once I get there I
    can't find the internet and network.
    wait. in the System Preferences window, the third row down should be "Internet & Network"... the second icon from the left should be "Network".
    are you saying you don't see the Network icon?
    I clicked show
    all and it doesn't add anything.
    correct that's just a "return to the main menu"-type thingy - i.e. if you click on "Appearance" from System Preferences window, and then decide that you want to go back to the System Preferences main window, you'd just click on "Show All"
    What am I missing?
    I'm brand new to OS X.
    well, i don't think you need Virtual PC... but i think we should first figure out why you're not able to get to the network setup section of system prefs....
    cheers

  • Wireless Printing with Macbook Pro Help

    I just upgraded from an older G4 desktop to the macbook pro. I have a Canon Pixma 180 printer/scanner. Everything works with the desktop. I think I had a little challenge with the printer driver on the printer but all is good for the desktop.
    For the MBP internet access I am using the NetGear RangeMax. It works great.
    I would like to get rid of the G4 and just use my MBP. So this weekend I got a Linksys DPR 1260 print server. It says right on the box that its good for Windows and Mac. After I got it home. No instructions. The setup software is all for windows. I called their help line and all I kept getting was "we have a lot of difficulty with Mac's".
    They did not know what to do. I know.... I am bring the print server back.
    So I thought that I would get Apples Airport Express. But I have been reading lots of comments that this is somewhat problematic??
    Does anyone have a good wireless solution to printing? Would it help if I get a different printer?

    Hi Bob,
    I have a 9 year old Apple Laserwriter (PS4/12) that is not networkable that I managed to connect via a crossover ethernet cable to my Airport Extreme base station. This is then hooked up to my very old (appletalk) printer via an ethernet/appletalk converter, which you will not need, as your printer is much newer. If you have a USB printer, you may be able to connect it to the Airport Extreme via USB, and it will work, too.
    If you can hook up your printer via an ethernet cable to an airport Extreme, you can print wirelessly to the printer. I have been doing this for over 1.5 years, and it has helped me to keep an old, but reliable, printer functioning.
    I realized that this is kind of confusing, so here is my configuration:
    My cable modem is hooked up to my airport Extreme via an ethernet port (blue cable). My printer is hooked up to my airport Extreme via a crossover ethernet port (i.e. green cable). In order for my computer to "see" the printer, I then made appletalk active from my Airport.
    This then lets me print to my printer from either my powerbook G4 or my macbook pro.
    Amy Lossie

  • Wireless printing with MacBook Pro

    Hope this is the right forum - I have a new MacBook Pro (love love love it) with an Airport Extreme. I am trying to get it to print wirelessly with an HPF4480. I have followed the instructions but it continues to tell me that the printer is offline. Help! Thanks!

    Hi Zmiracle, are you saying that the Macbook Pro is not compatible for wireless? That is not correct. Suggest you go to http://www.apple.com/support/airport and look around. I think there is something missing here that we are not able to spot.
    You might want to go through this knowledge base article http://support.apple.com/kb/TS1253

  • Setting up new printer with MacBook Pro AND Dell?

    Need a printer, want an AIO, any work better than others with MacBook and Dell?  Purchased a HP Officejet 6500A Plus, any problems using both systems togehter?  Also, should I set up the Dell first then the Mac, or viceversa?

    Thanks for the help, I'm definitely getting there
    I changed the settings as you've described and can now print from my MBP. The 3 Dell laptops are another matter. Would you have any idea what the IP address of the printer would be? Or the AirPort Extreme? I'm following this tutorial:
    http://www.ifelix.co.uk/tech/1004.html
    without much success but I'm really guessing at the IP address. I've tried 192.168.1.1 (my router) and 192.168.1.101 (the IPv4 address) with no luck. I suspect it's the IP address that's the problem ...
    Any thoughts?
    Thanks
    Jay

  • MacBook Pro sees wireless networks but cannot join any. Connection timeout error

    I have a MacBook Pro here that sees all wireless networks but cannot join any. It gives a connection timeout error with every one.
    Internet access via ethernet cable works just fine.

    It's not uncommon for you to "see" a great many networks, dozens even, yet you not be able to connect to any of them even if they are "open" (no lock icon). There may be a number of reasons for that, such as they're too weak for a reliable connection, or the router may limit connections to only specified devices.
    There is only one way to achieve a reliable network connection, and that's for you to connect to your own wireless router. Even that doesn't work if its signal is too weak or if there are many competing wireless networks in your area.
    If it's your own AirPort Base Station you're trying to use but can't, the latter could be the reason. The only way to mitigate the effects of wireless interference is to use 802.11n and 5 GHz whenever practicable. Even today you may only find one or two 5 GHz networks being used in an otherwise "crowded" area.

  • Trouble with MacBook Pro finding AirPort networks

    I recently bought a new (refurbished) MacBook Pro (15", 1.83GHz), to replace my old iBook, which was one of the early white models, circa 2001.
    Everything about my new computer is wonderful, of course, except that every time I boot up, wake from sleep, or turn on the AirPort, it takes up to a full minute for the AirPort to find any open networks. This happens at school (where there are AirPort base stations all over the place), at home (where we have a Belkin router, and several neighbors have others), and at my parents' house (where they have a linksys router). It doesn't seem to matter whether the networks use encryption or not, nor how close or far I am from the nearest router. If I know the name of a nearby open network and type it in, I can get it, usually. On my old iBook, I had a little trouble with some of the networks at school sometimes, but never with this kind of delay across the board, and certainly never at home nor at my parents'.
    Also, at home, when the the AirPort finally does find the available networks, it NEVER chooses my router first, even though it's the only one in the neighborhood that I listed under "Preferred Networks."
    I've read some similar posts, dealing with problems with accessing encrypted networks, but nothing seemed to address my particular issue. It might be a defect with the AirPort or firmware, but I wanted to check, first.
    (Oh, and I'm not a complete newbie, but tech-speak often goes over my head. Please keep it simple.)
    Thanks!

    This is how I fixed the problem on my MBP.
    Go to Macintosh HD > Library > Preferences
    Delete the folder SystemConfiguration
    Go to System Prefrences > Network > Show+Network Port Configuration. Check Airport and Built-in Ethernet and make sure Airport is on the top of the list.
    Reconfigure your wep passwords and it should work. Worked for me. Also, you will have to redo your power settings.
    Regards,
    David Rodriguez

  • Macbook pro "breaks" wireless network

    greetings,
    whenever i'm home, i use my macbook pro to connect to our wireless network, a network that is usually only used by PCs (one running Network Magic).
    However, whenever i connect, it works great but sporadically it will "break" the network, causing the router to be reset. when it's down, it doesn't work for any computer. but this only happens when my computer is connected. also, this is the second router, so it shouldn't be that.
    is this caused by my wireless card or os?
    Message was edited by: mfeury

    I've been experiencing a very similar issue.
    I have a MBP from Nov 2007. I have a Billion 7402GL wireless/modem-router.
    I have a 3 year old Acer Aspire 5672 that I am using as nothing more than a Windows Media Center gateway. In other words the Acer's wireless connects to my main desktop in the next room, where all my TV shows are stored and shared out to it. It is then connected to the AV inputs on my TV.
    For the last month or so, if I am streaming something through to the Acer, if I then power up my MBP (where the WLAN is set to immediately connect) it appears that the MBP immediately consumes up all the signal/bandwidth to the wireless router, because the playback on the Acer either stutters, or freezes, which then crashes MCE.
    However once I disable WLAN on the MBP, the issue goes away.
    The strange thing is I have not altered the modem's firmware, nor any drivers on the Acer. I'd be willing to blame it on a Windows Update for Vista, but that wouldn't explain why I only suffer issues when the MBP's WLAN is operational.

  • Canon Pixma MP500 Printer won't print with MacBook Pro

    I just bought a brand new MacBook Pro to replace an older PowerBook G4 laptop. I have a relatively new printer - maybe one year old - a Pixma MP500 from Canon that worked fine with the old laptop. I can't seem to get it to work with the new MacBook. I can use it as a scanner no problem with the new laptop, but not as a printer. I installed the software from the original Canon CD, but when I go to "add printer" MP500 shows up in the list as a USB printer but won't add. When I try to add it I get a -9672 error. Anyone out there with any idea what to do?

    Hi, I actually did tried doing exactly that (should have mentioned it in my first email) and just tried it once more for good measure, but I still get the error message when I go to add the printer. So, MP500 shows up in my printer name list, with USB as the connection type, and print using shows Canon IJ Printer, but when I go to add I get "An error occurred while trying to add the selected printer. Error: -9672". Help!

  • I would like to sync iphone 5S with OUtlook 2010 over wireless network

    Hi all,
    I need to sync an iPhone 5S with Outlook contacts and calender over internal wireless network.
    I have just setup a new iTunes account and have iCloud installed on a Windows 7 machine.
    Thanks.

    You need to configure iCloud on the iPhone first then the Windows 7 PC...
    https://www.apple.com/icloud/setup/ios.html

  • Resolution issue with macbook pro 13 (late 2013) and dell u2711

    I have a Dell U2711 (native resolution 2560x1440) that I use without issue with a macbook pro late 2007 (running 10.10.x), various iMacs and Macbook air 2011 running 10.10. When I say without issue, the display works at its native resolution.
    Last week we got a MacBook Pro 13in, late 2013 model.
    If I connect this macbook via either thunderbolt connection to the u2711 using either DVI port on the dell, the maximum resolution that I can use is 1920x1080. I am using apple mini displayport to DVI adaptors (I have tried 2 different ones and 2 different DVI cables, with no improvement). Clicking option + scaled in sys prefs does not give the native resolution as an option.
    However, I just discovered that if I use a DVI to HDMI adaptor and I connect the macbook to the display I get the full native resolution without issue (2560x1440).
    I have zapped the pram, powered down the display etc etc etc and it made no difference.
    I would prefer to use the mini DIsplayPort to DVI adaptor rather than HDMI, any suggestions appreciated.
    TIA.

      Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
      Start up in Safe Mode.  http://support.apple.com/en-us/HT1564
    Best.

  • Home sharing with macbook pro (10.6.1) and Power pc G5 (10,5,8)

    I just installed the new iTunes 9 with home sharing on both copputers.
    I've activate the home sharing on both too, and then :
    I can see the sharing and the library of the macbook pro on the G5
    But
    I cannot see the sharing and the library of the G5 on the Macbook pro.
    Both computers have the same settings...
    If some one can help... thanks in advance..

    Adobe acrobat and acrobat reader current versions. I am away from it at the minute, but I will try preview just to see if it is that.  If so, is there any solution? I am actually not sure acrobat is installed on the iMac, does it need to be?

Maybe you are looking for

  • Iphoto, the App Store, iMessage problems on OSX 10.8.5

    I have a couple of problems. Firstly, my imessage does not work. When I send messages it does not deliver them, and puts this little red exclamation point next to the message. When Imessge is not active i recieve old texts from weeks ago in the top r

  • Will Reinstalling Mountain Lion Erase My data ?

    Please Help, I am haivng issues with FACETIME and MESSAGES, both are not letting me log in. I have tried several accounts but no luck. I tried Keychain Unknown Certificate deletion as well, still no luck. I still cannot log in to both. Now i believe

  • InDesign file saving and exporting S-L-O-W.

    I am a designer using the InDesign/InCopy layout workflow. After my last post things were working pretty good for awhile. But now it is taking more than an hour to save over the network. I tried putting everything in the same folder on the network (l

  • InfoPath Filler 2010 will not open a form in SharePoint 2013

    I'm having a problem with the coexistence of SharePoint 2013 and Office 2010, specifically InfoPath. We are running SharePoint 2013 Standard, so we do not have access to web-enabled InfoPath forms, which is okay since all of our client machines have

  • Line wrapping - JTextPane

    Hi, Does anyone know how to disable line wrapping in a JTextPane? Thanks, Michael