Printing with Xerox Phaser 3124 printer in leopard

The Xerox Phaser 3124 printer will work with Leopard you have to download and install the
Samsung ML-2510 printer driver for mac.
Heres the link http://driverscollection.com/?file_cid=38840744151bcd2230775d019ca
(theres a spam checker down the button you need to fill in before it will download)

Update Acrobat 9. I think you need at least 9.2.2 for Windows 7 compatibility. Upgrade to the latest 9.3.4.

Similar Messages

HAVING PROBLEMS WITH OS 10.6.8 PRINTING WITH XEROX PHASER. MacPro crashes when printer warms up. Does anyone have a solution? 6360 DN

I've been using Macs since 1984. Have been using Xerox Phaser printers for ten years. But with the last update to OS 10.6.8 last summer, I've had problems with crashing when printing. My MacPro crashes when printing via ethernet prot with Xerox Phaser 6360DN or when the printer warms up. Worked fine with OS 10.6.7. Internet postings suggest this is a common problem for all Mac users with Xerox Phaser printers. Apple put out an update to 10.6.8 to address the problem. I downloaded it but it did not solve the problem. Have tried all the Xerox drivers along with Apple drivers. Can't solve the problem. Xerox says it's an Apple problem. Does anyone KNOW how to solve the problem?

sorry, just saw that i was accidently in the snow leopard section....i reposted under the correct section. here's the link.
http://discussions.apple.com/message.jspa?messageID=12340796#12340796
sorry for the inconvenience, i was looking at other posts using search and didn't realize that i was reading the 10.6 board.
thanks again!!
Message was edited by: Elisabeth Hogrefe

Any way to use a Xerox Phaser 3124 in Leopard

Is it possible to Xerox Phaser 3124 printer in Mac OS X Leopard? I'm planning my transition to a Mac Mini but I'm not sure if my printer will work. Xerox website says it doesn't support Macs. I've only used my printer in Windows XP and Ubuntu Linux (using Samsung ML-1710 drivers). Browsing in Samsung website I've found ML-1710 drivers for OS X. I'm not sure if it would be as simple as in Linux to try to use ML-1710 drivers to make it work.
Any considerations? I would buy a new printer totally compatible with OS X if I could but right now this is out of question

The Xerox Phaser 3124 is a host based printer (specifications http://www.office.xerox.com/printers/laser-printers/phaser-3124/spec-enus.html). The Linux driver for the Samsung ML-1710 is the splix driver http://openprinting.org/show_printer.cgi?recnum=Samsung-ML-1710. Currently, there is no Mac OS X installer package for this driver. You would have to compile it from source code yourself.
Matt

Xerox phaser 3100 and Snow Leopard

Good evening!
Since 2 days I am trying desperately to install the printer of my dad (xerox phaser 3100) on my macbook 10.6. In fact we did the upgrade on snow leopard without knowing that the printer would not work anymore.
Before writing here I made some research on internet and I found this web site:
http://sourceforge.net/projects/gimp-print/forums/forum/4358/topic/3407337
The Phaser 3100 is a GDI printer. The Gutenprint drivers do not support such printers.You should be able to print with the Xerox drivers provided for OS X 10.4. To make the drivers work in OS X 10.6, install the drivers from Xerox. Then in a Terminal window (/Applications/Terminal) run the following commands--sudo chown -R root:admin /Library/Printers/Xerox/sudo chmod 775 /Library/Printers/Xerox/filter/rastertoprinter You will have to force any 64 bit applications to run in 32 bit mode to get the full functionality for the drivers.
Of course I went on the website of xerox to download drivers for 10.4... but when I tried to install it I got a error message saying that the package was compiled for 10.4 version...
If you would have a solution it would be great!
Thanks in advance and have a great easter!

Ok,
I tried to reboot computer, connect the usb cable. Try an other usb cable but it's not working...
In my system profiler my printer is not appearing. I have this:
I tried to connect a usb key in my computer and its working... so usb port is ok :-)
Still not successful :-(... is it a problem if I have other printer install on this computer?
Thank you!

Xerox Phaser 6110 and Snow Leopard

Hi there,
Please can somebody help?
I bought a new imac the other day and connected my three year old Xerox Phaser 6110 printer, and to my shock, it won't print.
Thanks to this forum, I found out that I'm not the only one with the same problem.
Now, I've read some of the topics on what to do, and I've tried two of them, but I still can't print. Maybe I'm doing something wrong?
I went onto Xerox's website and followed their instructions - installed Rosetta, and got to a point where I couldn't continue. It said; "right click, and ...". I can't remember what it said I had to do, but, my mouse does not give me the option to 'right click', so I had to abort that method.
I then tried a method I found on here - inserted the Xerox driver disc again, loaded the driver, clicked on 'System Preferences' and 'Printers', and tried to add the printer again, but it wouldn't let me. Maybe I was doing it wrong?
HELP!
I really don't want to go buy a new printer

Ok,
I tried to reboot computer, connect the usb cable. Try an other usb cable but it's not working...
In my system profiler my printer is not appearing. I have this:
I tried to connect a usb key in my computer and its working... so usb port is ok :-)
Still not successful :-(... is it a problem if I have other printer install on this computer?
Thank you!

Xerox Phaser 3100 and Snow Leopard: work or not?

Hi,
Xerox don't support Phaser 3100 scan functions on Mac OS X 10.6 (the xerox printer driver work perfectly), so I installed SANE driver and scanner work fine on my MacBook AIr with Mac OS X 10.6.2.
Then, I installed Snow Leopard on my iMac 20" 2,0GHz and the same driver didn't work; so, I'll be back to connect Phaser 3100 to my MacBook Air and the scanner didn't work now!!
I'm going crazy, please anyone help me!!

Not here.
I used the phaser 3100 on leopard via its wireless options on my studio's network.
now my mac is running snow leopard and printer driver doesn't work.
there's no updated drivers per se.
i don't know if i should wait for a driver or sell the printer. **** !

Stopped Jobs with Xerox Phaser 4500

When I try to print to the Phaser 4500 via USB, the print job stops. I reinstalled the latest driver, but makes no difference. Then I tried to connect to the printer via an ethernet cable. (Do I need to use a crossover cable?) I couldn't get to the point of adding the printer. I'm told Appletalk isn't activated, and it is. Any suggestions?

Your Mac can sense crossover or not, so that doesn't matter. If I don't guess correctly here, we'll need to know more about your connections, network, internet, etc.
In order for appletalk to work (on OS X), the interface (ethernet or wireless) must be working - to be working, an interface must have a valid IP address (not one that starts 169.x.x). Your ethernet is probably trying to get an automatic IP address (via DHCP), but it can't when connected only to the printer. You need to manually setup in Network Prefs > show built-in ethernet > TCP/IP tab. Configure IPv4 Manually. Enter a local-only IP address: 192.168.5.5. Re-check that Appletalk is on.
Now try adding in Printer Setup.

Problem with Xerox Phaser 6360

Dear all,
I have the following problem. When I try to install the driver from xerox it crashes on the screen that asks me how to install the printer. I noticed someone which has the same problem in this topic:
http://discussions.apple.com/thread.jspa?threadID=1513028
However the sollution is not clear to me what do i need to reinstall? The complete OS or is there another sollution?
Thanks
Basiel

There is an option to preserve user settings. Select that option.
http://support.apple.com/kb/HT1545

Photoshop Printing Problems with Xerox 7400 Phaser

Cannot get my Photoshop CS5 to print full size documents to Xerox 7400 Phaser. Prints only 1" thumbnail of anything I send to it. This is the only program that has any problem with the Phaser and the only printer Photoshop has a problem with. Unfortunately, it's the only 11x17 color printer in our office. Anyone else had this problem?
I have exported files to other programs, but that lessens quality of photo work and also defeats the purpose of having an expensive, extensive program for it.
WHS

Correction it's a Xerox Docucolor 242 PS with Fiery

Irregular Printing - Xerox Phaser 8560

I've had this Xerox Phaser 8560 for years and have been using it with Snow Leopard without issue.
Upon recent update to 10.6.3 (from 10.6.2) I am now having issues where one print will be fine, but then another separate print will just come out as data/numbers/multiple useless pages.
It's oddly inconsistent and it does not matter which program I am printing from.
I have removed/added the printer; completed restarts; checked printer firmware; reset printing system; etc... the usuals.
Anyone else having any 8560 issues?

OK. Here is something that works. So far. The last 30 minutes or so. Based on several long chats with Apple reps and all sorts of tries.
The short version is: Re-install Snow Leopard 10.6, and then go back to 10.6.2.
We’ve done it to two iMacs and it seems to be working. Note: 8560 connected via USB to one machine and “shared” with a second iMac.
How to:
First, turn off automatic updates. Apple>system preferences>software update.
That’s to keep you from automatically upgrading to 10.6.3 in the future until Xerox/Apple fix this problem.
Install Snow Leopard from CD. Check to see if it worked. On one of our machines we had to boot off the CD to get 10.6 to re-install. On the other machine we did not have to boot off the CD.
Lots of whirring and buzzing here…
Upgrade to 10.6.2.
Download is here : http://www.apple.com/downloads/macosx/apple/macosx_updates/macosxv1062updatecomb o.html
Delete, then add back the 8560 printer: Apple>system preferences>print and fax> click printer, hit minus, delete, then add back. Not sure this in needed, but won't hurt.
You might need to flush the printer’s RAM as well. Can do that from the panel on the front of the printer. Not sure this make any difference, but can't hurt. We’ve also had a problem with printer taking itself offline, but don’t know if this is a related problem or not.
Thanks to Andrew at Apple support for reminding me how to boot off the CD.
Hope this works. Please remember I am not a Mac expert. Just a guy who’s trying to figure out this problem. You may want to talk to Apple yourself first before trying this.
Message was edited by: ltcjcw

Pstops error with Xerox Printer on picture printjobs

Dear Mac Techs
I have a silly problem with Tiger 10.4.11 on a Intel iMac and a Xerox Phaser 6120.
If I print from Word, Exel, iWorks and other programs I don't get any errors even with pictures included into the document. But if I want to print a picture directly or stored as pdf I get all the time the following error message.
"The process "xc6120pstops" terminated unexpectedly on signal 10".
If I store the pictures in trouble as *.ps file and then print it I don't get this fault.
I did allready repair the user rights and I also did a compleat now clean install of the hole system with no change. I also did download the newest printer driver for systems up to Leopard 10.5.
Does anyone hav a clue whats wrong?
Thank you for your feedback.
Kind regrads from Switzerland
Thomas Thaler

I have this printer and haven't had this exact problem (I have had other problems getting the printer to wake up) but printing pdf's, jpeg's, etc. have been trouble free. How are you connecting to the printer (i.e. IP, Appletalk, Bonjour...)? Is this a system error message? What program are you using to print? Have you tried the same file and printing from different applications (e.g. a pdf from Preview or Adobe Acrobat)?
By the way, your computer information lists "10.4.1" rather than "10.4.11".

Xerox Phaser 8860 on Network-How to turn off popup print job confirmations?

I recently upgraded to OS 10.6.4 and as expected I needed to reinstall the drivers for a few peripherals. One of which was the Xerox Phaser 8860 which is on the network. Everything works, but now after each print job prints out a window pops up in the center of the screen notifying me that ::Job### has printed on Xerox Phaser 8860::. It causes no serious problems, but it does knock me out of what ever program I am using. Which can get extremely annoying when I'm drawing and I repeatedly get halted mid (pen/brush) stroke. It stays up on the screen for about a minute and a few times it has remained up. There is an option to close, it simply gets really annoying after the 30th time. Common sense would suggest to not draw while a file is on it's way to the printer, but my work day is a constant flow of drawing, printing, color tests and editing. It's not practical or good for deadlines to stop drawing to wait for a print job to come out and the pop up window to go away.
I tested printing from the other computers, which are PC's using various versions of windows and they all come up with the same pop up window (though theirs come up at the bottom right of the screen). They do not receive confirmation windows from the other printers not on the network.
This suggested to me that this was a setting with the Xerox software. However, I spoke to the technical support for Xerox and they said that the pop up window had nothing to do with their software and claim that it had to be generated by the Mac OS 10.6.4.
I am regularly printing from the following programs:
Photoshop, InDesign, Illustrator, Adobe Acrobat, Word, and Excel. The pop out window has acquired while printing files from all of these programs. I doubt that has any relation but I thought I'd add it, just in case.
I would very much like to know how to turn this confirmation notification off in OS 10.6.4. Or if anyone has an thoughts on what software could be the culprit.

In CWIS go to Properties > General > Printer Defaults and disable the Startup page As for garbage prints, That sounds like a PS error. And they are almost always due to improperly embedded fonts. Have all your users switch the following in their drivers (Picture is the global driver, but the regular driver will have the same option.) Essentially by default the printer uses its own locally stored fonts on the jobs, but when the fonts are misunderstood, or unknown it winds up printing wingdings.

Printing Problem with Xerox 6120

I've connected a Xerox 6120 color laser printer to my home LAN (cable modem to Netgear wireless router). When the printer is turned on the Mini can't get an IP.I've tried using fixed IP for both the Mac and the Xerox to no avail. (FYI, my G3 Pismo Laptop works correctly as does a Dell laptop in this same setting)
Xerox support has acknowledged this problem with the Mini. They told me they've communicated with Apple tech support.
Mini & Pismo Laptop Mac OS X (10.4.3)

Peter,
Sorry I can't help you with your particular question, but I am considering purchasing a Xerox Phaser 6120. Are you generally satisfied and does it work with/support Rendezvous? Thanks very much.

Mac OS 10.6 Print Server slow performance to Xerox Phaser 3600

Hi,
I have a client who has numberous printers captured on a Mac OS X 10.6 Server with print services running which works fine with every printer except for a Xerox Phaser 3600 (small A4 mono postscript printer) in that print jobs sent to it via the print server take upto 5 minutes to printer. If the client computers print direct then it is fine and very speedy.
Below is some more detail and any help or suggestions with this would be greatly appreciates.
• Printer server is a MacMini running Mac OS X Server 10.6.8 v1.1
• Xerox 3600 printer is a small A4 mono postscript printer.
• Printing direct to printer is instant, via the print server can take up to 5 minutes.
• The print server has various other printers setup and they are not experiencing the same performance problem.
• The print server is using the LPD protocol but they have tried the IPP protocol and again it is slow.
• When they send a job to print it remains in the users local print monitor and the servers print monitor for up to 5 minutes.
• The Xerox printer is running the latest firmware update.
• The print server is using a Xerox downloaded driver as opposed to one of Apple OS shipped drivers.
• Checked Xerox compatibility list and this printer is fully supported in 32bit and 64bit applications.
• Restarted printer.
• Test jobs have been small TextEdit plain text tests.
Thanks in advance
Anton

Try this:
https://discussions.apple.com/message/15518965#15518965

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

Printing with Xerox Phaser 3124 printer in leopard

Similar Messages

Maybe you are looking for