Printint XML string using XSLT mapping
Hi,
I'm trying to build a outgoing SOAP message with in XI, my backedn legacy application expect the soap message to be in certain format. It expect the xml request passed in the body of the message as whole xml string. I need to pring the xml something like this, I would appreciate if anyone had implemented something like this before. if you look at the below message I'm enclosing the whole xml string in the data element.
<data xsi:type="xsd:string"><?xml version="1.0" encoding="UTF-8"?> <crm:schedule_call_request session_id="mid://07060623130210031519@elnk_crm.com" target_system_id="csi_ivr" xmlns:crm="https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_crm.xsd" xmlns:xcommon="https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_common.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_crm.xsd https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_crm.xsd https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_common.xsd https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_common.xsd"> <crm:call_parameter global_rules_version_id="" manual_request="true" originating_skillset="TS (DU/BB)|ADSL RETAIL" parameter_version_id="1" transfer_skillset="TSBBDSL...WinELNK"> <crm:call_id>10031519</crm:call_id> <crm:department_name>TS</crm:department_name> <crm:object_type>CASE</crm:object_type> <crm:object_id>73079085</crm:object_id> <crm:call_time>2007-06-07T12:30:01.000-08:00</crm:call_time> <crm:customer_phone_number>6263452656</crm:customer_phone_number> <crm:override_attempts>false</crm:override_attempts> <crm:retry_count>3</crm:retry_count> <crm:call_trigger>3000</crm:call_trigger> <crm:call_time_padding>10</crm:call_time_padding> <crm:override_local_customer_call_hours>false</crm:override_local_customer_call_hours> </crm:call_parameter> </crm:schedule_call_request></data>
Hi
thanks for responding. here is the input SOAP message that I was building in the XLT mapping. I was stuck at putting the xml in the data element.
soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <soapenv:Header>
- <wsa:EndpointReference soapenv:actor="http://schemas.xmlsoap.org/soap/actor/next" soapenv:mustUnderstand="0" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing">
<wsa:Address xsi:type="soapenc:string" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">https://xmlc-qe.corp.earthlink.net/ws_xmlc/s_router</wsa:Address>
<wsa:ServiceName wsa:PortName="XMLCollectivePort" xsi:type="soapenc:string" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">wsa:ServiceName</wsa:ServiceName>
</wsa:EndpointReference>
<wsa:To soapenv:actor="http://schemas.xmlsoap.org/soap/actor/next" soapenv:mustUnderstand="0" xsi:type="soapenc:string" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">https://xmlc-qe.corp.earthlink.net/ws_xmlc/queues/csi_queue</wsa:To>
<wsa:Action soapenv:actor="http://schemas.xmlsoap.org/soap/actor/next" soapenv:mustUnderstand="0" xsi:type="soapenc:string" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">https://xmlc-qe.corp.earthlink.net/ws_xmlc/action//messaging/put_single</wsa:Action>
<wsa:MessageID soapenv:actor="http://schemas.xmlsoap.org/soap/actor/next" soapenv:mustUnderstand="0" xsi:type="soapenc:string" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">07060623130210031519</wsa:MessageID>
- <wsse:Security soapenv:actor="http://schemas.xmlsoap.org/soap/actor/next" soapenv:mustUnderstand="0" xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/07/secext">
- <wsse:UsernameToken>
<wsse:Username xsi:type="soapenc:string" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">elnk_crm</wsse:Username>
<wsse:Password wsse:Type="wsse:PasswordDigest" xsi:type="soapenc:string" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">20UioFa77hI6MLhlc+KPDF95Hx0=</wsse:Password>
<wsse:Nonce xsi:type="soapenc:string" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">VlX1Jpoq+vkQCQ8af2SaCDP1u9c=</wsse:Nonce>
<wsu:Created xsi:type="soapenc:string" xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">2007-06-06T23:13:12Z</wsu:Created>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
- <soapenv:Body>
- <ns1:SubmitRequest soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns1="SubmitRequest">
<data xsi:type="xsd:string"><?xml version="1.0" encoding="UTF-8"?> <crm:schedule_call_request session_id="mid://07060623130210031519@elnk_crm.com" target_system_id="csi_ivr" xmlns:crm="https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_crm.xsd" xmlns:xcommon="https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_common.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_crm.xsd https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_crm.xsd https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_common.xsd https://signup.earthlink.net/ws_xmlc/schema/crm/271005/xmlc_common.xsd"> <crm:call_parameter global_rules_version_id="" manual_request="true" originating_skillset="TS (DU/BB)|ADSL RETAIL" parameter_version_id="1" transfer_skillset="TSBBDSL...WinELNK"> <crm:call_id>10031519</crm:call_id> <crm:department_name>TS</crm:department_name> <crm:object_type>CASE</crm:object_type> <crm:object_id>73079085</crm:object_id> <crm:call_time>2007-06-07T12:30:01.000-08:00</crm:call_time> <crm:customer_phone_number>6263452656</crm:customer_phone_number> <crm:override_attempts>false</crm:override_attempts> <crm:retry_count>3</crm:retry_count> <crm:call_trigger>3000</crm:call_trigger> <crm:call_time_padding>10</crm:call_time_padding> <crm:override_local_customer_call_hours>false</crm:override_local_customer_call_hours> </crm:call_parameter> </crm:schedule_call_request></data>
</ns1:SubmitRequest>
</soapenv:Body>
</soapenv:Envelope>
Similar Messages
-
How to get the WHOLE xml document inside a string using XSLT mapping
Hi folks,
I have a deep xml structure that I want to embed as body, tags included, in a mail message (not as an attachment).
I'm trying to use Michal's method in this blog
/people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
However, I can't get it to deliver the entire structure instead of just specific elements.
Any help is greatly appreciated,
Thanks,
GuyAshok,
I was able to work it out for my case.
This XSL......
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<inside>
<namestring>
<xsl:text disable-output-escaping="yes"><![CDATA[<![CDATA[]]></xsl:text>
<xsl:copy-of select="outside/name/*"/>
<xsl:text disable-output-escaping="yes"><![CDATA[]]]]></xsl:text>
<xsl:text disable-output-escaping="yes"><![CDATA[>]]></xsl:text>
</namestring>
</inside>
</xsl:template>
</xsl:stylesheet>
...will transform this input....
<?xml version="1.0" encoding="UTF-8"?>
<outside>
<name>
<nameone>name1</nameone>
<nametwo>name2</nametwo>
<namethree>name3</namethree>
</name>
</outside>
...and put the whole lot into the CDATA element.
Hope this helps you,
Guy -
String to XML conversion using XSLT
Hi all,
I have a scenario when my source input XML is in the form of a string which needs to be transformed into an XML target fields.
I am using XSLT mapping to do that and its working but unfortunately, input XML contain xml declaration <?xml version='1.0'?>. Because of which it fails.
I need to remove this. Can any body please suggest how to do this?
Any help will be appriciated.
Regards
-KulwantHi,
Refer these links
XI/PI: Convert Flat File to Deeply Nested XML Structures Using Only Graphical Mapping
Regards,
Surya -
How to update XML file using XSLT
Hi there,
I have a "small" issue with exporting data to an XML file using XSLT.
A two steps process is needed to import data from a non-hierarchical XML file into ABAP, change the data, and then update the XML file with new values. The problem is not trivial, since the format of the XML file is a complex one: there are many interdependent elements on the same level, pointing to each other by using id and ref attributes. Based on these values the data can be read and written into an internal table. I use XSLT and XPath for that. So the inbound process is done and seems to work correctly. I have to mention that the file contains much more data than I need. I am working only with a small part of it.
Now the changed data must be exported back into the XML file, meaning that the content of certain elements must be updated. How can this be done with XSLT? I can pass only the internal table to the transformation, so how do I access the XML file in order to update it? I have tried to use the <B>xsl:document()</B> function to access the content of the file store locally on my PC, but it fails each time by throwing and URI exception. I have tried the absolute path without any addition and the path with the file:/// addition. Same result. Please advise.
Many thanks,
Ferenc
P.S. Please provide me with links only if they are relevant for this very matter. I will not give points for irrelevant postings...Now the changed data must be exported back into the XML file, meaning that the content of certain elements must be updated. How can this be done with XSLT?
XSLT approach: check these online tutorial
http://www.xml.com/pub/a/2000/08/02/xslt/index.html
http://www.xml.com/pub/a/2000/06/07/transforming/index.html
ABAP approach:
for example you have the xml (original) in a string called say xml_out .
data: l_xml type ref to cl_xml_document ,
node type ref to if_ixml_node .
create object l_xml.
call method l_xml->parse_string
exporting
stream = xml_out.
node = l_xml->find_node(
name = 'IDENTITY'
ROOT = ROOT
l_xml->set_attribute(
name = 'Name'
value = 'Charles'
node = node
(the above example reads the element IDENTITY and sets attribute name/value to the same)
like wise you can add new elements starting from IDENTITY using various methods available in class CL_XML_DOCUMENT
so how do I access the XML file in order to update it?
you have already read this XML into a ABAP variable right?
Sorry couldnt understand your whole process, why do you need to read local XML file?
Raja -
Using XSLT mapping to avoid File content conversion
Hi all,
Can we avoid FCC by using XSLT mapping? I have a scenario in which I have to avoid FCC in the adapter and save the file in a excel/csv format. I have been through the different blogs and forums in SDN.
I have been through Michal Krawczyk's Blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2803. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Got a bit confused whether that blog serves my purpose. Expecting your valid inputs.
Thanks and regards,
Harikumar. SHi,
There are multiple ways in which you can avoid Content Conversion in the Sender / Receiver File adapters.
I think there was a heated discussion already regarding this in one of your earlier threads,
Read/Write csv files without file converter
Basically, if you want to avoid content conversion on the sender file adapter,
1. Write an Adapter Module. or,
2. Use a Java Mapping.
If you want to avoid content conversion on the receiver File adapter,
1,. Use a Adapter Modules or,
2. Use Java Or XSLTmapping ( XSLT can be used if the input to the mapping is XML and output needs to be say a Excel File etc).
Regards
Bhavesh -
How to skip first TWO Lines of .txt file using XSLT Mapping
Hi Friends ,
I have an .txt file in has the format as
<TEST>
4564564545
56456444566
56465
How can i skip the first two Lines when i am writing the XSLT Mapping ?
That <TEST> and empty line shouldn't go the rfc .
How can i skip and sent to rfc using XSLT Mapping ?
Best Regards .,
V.Rangarajanyou can avoid the empty lines in your File Content Conversion by defining offset.
<i>Under Document Offset, specify the number of lines that are to be ignored at the beginning of the document.
This enables you to skip comment lines or column names during processing. If you do not make an entry, the default value is zero lines.</i>
ref: http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
then the generated XML after FCC will not have the empty lines. -
Sorting on specific field using XSLT Mapping
Hi All,
I am trying to sort the records on specific field using XSLT mapping.But I'm unable get the proper output for the following code.
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:a="http://xxxxxxxx">
<xsl:output method="xml" indent="yes" />
<xsl:template match="/">
<a:T1>
<Row>
<xsl:for-each select="a:S1/Record">
<xsl:sort select="EmpID" />
<EMPID>
<xsl:value-of select="EmpID"/>
</EMPID>
<ENAME>
<xsl:value-of select="EmpName"/>
</ENAME>
</xsl:for-each>
</Row>
</a:T1>
</xsl:template>
</xsl:stylesheet>>
Currently getting following output :
http://www.flickr.com/photos/21390012@N04/2074799747/
Expected output should be like below :
http://www.flickr.com/photos/21390012@N04/2074807393/
Kindly send me suggestion to achieve this.
Regards
PullaraoHi ,
I donno much about srting in XSLT but i can give you one example on that.
Example :
This is how to sort numbers in xslt.
Try this :
<xsl:for-each select="learn[@kind='done']">
<xsl:sort select="number(@rank)" data-type="number"/>
<table border="00" cellpadding="3" width="100%">
<tr>
<td width="100" valign="top" align="right"><input type="checkbox" checked="checked" readonly="readonly"/></td>
<td width="10" valign="top" align="right"><xsl:value-of select="position()"/>. </td>
<td valign="top">
[<xsl:value-of select="@rank"/>] <xsl:value-of select="@title"/>
</td>
</tr>
</table>
<table border="00" cellpadding="3" width="100%">
<tr>
<td width="100"> </td>
<td valign="top">
<xsl:apply-templates/>
</td>
</tr>
</table>
</xsl:for-each>
Regards
Aashish Sinha
PS : reward points if helpful -
File TO File-Using XSLT mapping (for Beginners) --- Error in XSLT
Hi,
I am following this wiki (TO File-Using XSLT mapping (for Beginners))
https://wiki.sdn.sap.com/wiki/display/XI/FileTOFile-UsingXSLTmapping%28forBeginners%29
When creating Xslt from the MapForce, when I click on the XSLT Tab I am getting the following error
http://www.flickr.com/photo_zoom.gne?id=1216715484&size=o
How to correct this error ?.....
Thanks
srini
Message was edited by:
srinivasHello,
The XSD you are using is from Data Type and you are using it for mapping.
Instead export XSD for Message Type and also pass the XML schema for source that will solve the issue and your XSLT will be generated.
Regards, -
Remove SOAP Envelop using XSLT mapping.
Hi,
I need a code to remove SOAP Envelop using XSLT mapping.
Source:
<?xml version="1.0" encoding="UTF-8" ?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns="urn:enterprise.soap.sforce.com">
<soapenv:Body>
<getServerTimestampResponse>
<result>
<timestamp>2008-06-19T14:22:25.004Z</timestamp>
</result>
</getServerTimestampResponse>
</soapenv:Body>
</soapenv:Envelope>
target:
<?xml version="1.0" encoding="UTF-8" ?>
<a>
<b>
<c>2008-06-19T14:22:25.004Z<c>
</b>
</a>
Please help me in this
Thanks&Regards,
Yugahi,
<?xml version='1.0' ?>
<xsl:stylesheet version="1.0" xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes" />
<xsl:template match="/">
<ns0:c>
<xsl:copy-of select="SOAP-ENV:Envelope/SOAP-ENV:Body"/ />
</ns0:c>
</xsl:template>
</xsl:stylesheet>
This will get your whole body...
Your root node should belong to some namesapce...i.e. getServerTimestampResponse .
Thanks,
Vijaya. -
Hi,
I have a scenario where I need to perform an XML to XML transformation and I need to do this using XSLT mapping.
I am using XMLSpy.
Could somebody help me on this issue?Any weblogs that can help me on this?
regards,
PrashanthHi Prashanth,
You can do the xsl transformation in XMLSpy itself.First create your source xml file in XMLSpy by selecting file type as xml.After that create your xslt program file by selecting file type as xslt.
Then you can use the xslt program for transformation of source xml into target xml by choosing menu XSL/XQuery->XSL Transformation.
sample xsl code for an example:
source xml structure:
<?xml version="1.0" encoding="UTF-8"?>
<root>
<header>
<detail>
Detail1
</detail>
<detail>
Detail2
</detail>
</header>
<header>
<detail>
Detail3
</detail>
</header>
</root>
xsl program:
<xsl:stylesheet version = '1.0'
xmlns:xsl='http://www.w3.org/1999/XSL/Transform'>
<xsl:template match="/">
<root>
<xsl:for-each select="//header">
<idoc>
<xsl:for-each select="detail">
<detail>
<xsl:value-of select="."/>
</detail>
</xsl:for-each>
</idoc>
</xsl:for-each>
</root>
</xsl:template>
</xsl:stylesheet>
target xml structure:
<?xml version="1.0" encoding="UTF-8"?>
<root>
<idoc>
<detail>
Detail1
</detail>
<detail>
Detail2
</detail>
</idoc>
<idoc>
<detail>
Detail3
</detail>
</idoc>
</root>
Hope this would help.
Rgds
Sudhakar. -
How to Count schedule lines in IDoc ORDERS05 using XSLT Mapping
Hi Experts,
In a Scenario where we are sending Purchase order (ORDERS05) to SAP SNC using XSLT Mapping,
where in we need to count the no. of schedule lines against the Purchase Order line.
As in Schedule line segment there is no such provision, so it needs to be handle in XSLT mapping to count the schedule lines.
Can you all please guide me how to go about the same.
Regards,
Nitin PHi Satish,
Thank you very much for the reply,
as there is only Quantity and other information is maintained against schedule lines how we can count the schedule line repeatation against PO line ? Is that very simple as you suggested or some other consideration also needs to be taken.
Please clarify the same and let me also know if there are some standard documents also for the same.
Regards,
Nitin P -
ERROR WHILE USING XSLT MAPPING IN INTERFACE MAPPING
Hi,
We are using an xslt mapping in our scenario but while i load the XSLT mapping in the interface mapping i get a message :
Transformer configuration exception occurred when loading XSLT
sorce interface :outbound and asyncronous.
mapping : XSLT mapping (imported as a zip file)
target interface: abstract,asyncronous.
The xslt runs well in standalone and its well formed and there is no name space issue.
please help if any one has faced such a situation while using XSLT mapping.
regards,
Anirban.Hi Anirban
When you say it runs well <i>standalone</i> what exactly do you mean? Which XSLT processor are you using to run it? There are subtle difference between XSTL processors that can sometimes result in incompatibilities. For instance, I have seen XSLTs run correctly in XMLSpy but incorrectly (or at least slightly differently) in XI.
Regards,
Thorsten -
Advantages of using XSLT mapping
Can any one explain me the advantages of using XSLT mapping compare to graphical.java and abap mappings
Hi
Please go through the below links for details on XSLT Mappings..
XSLT Mapping
/people/udo.martens/blog/2006/04/26/xslt-recursive-templates
Thread:
Sample XSLT mapping required
XSLT Mapping Links::->
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
/people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
XSLT Mapping with java enhancement
/people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
XSLT - ABAP.
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
exception handling errors in respect with XSLT mapping
http://help.sap.com/saphelp_nw2004s/helpdata/en/8a/7672f7d7e444439fd7024f806221a4/content.htm
Hope this will help
Regards
Piyush
**reward points if found useful. -
Change Filename using XSLT mapping without variable subtitution
Hi,
My scenario is IDOC to file...i am using XSLT mapping, i want to change the filename format to OUT_<Purchase Number>_<DDMMYYYYhhmmss>_KKKK.txt, i cannot use UDF function as i do XSLT mapping i also i cannot use variable substitution as the target structure doesn't have PO and timestamp as tag elements. Can i acheive using writing a adapter module? I appreciate if anyone could help me with this..
Many thanks>
Ravibabu Adari wrote:
> Hi,
> If i go with Option1: what changes i need to do in the file adapter to tell the adapter to pick the filename from XSLT ?
> If i go with Option2: To which element to the target structure should i map the filename using UDF ? do i have to add additional element to the target structure? what changes i need to do in the file adapter to tell the adapter to pick the filename from Message mapping ?
>
> Many thanks
Hi,
in both cases you need to enable file adapter specific properties and enable the file name...
for this you need to use the dynamic configuration properties for the same...
usage of this option using udf in message mapping is rather easy than to use in XSLT...for this you dont need to change the structure in the message mapping...message mapping is just needed for execution of the udf.. thats it..
HTH
Rajesh -
Problem in parsing a xml string using dom parser
i want to parse a Xml String using a Dom parser......the parse function in dom parser takes only input stream as argument.......so i made the code as
InputStream inputstream = new StringBufferInputStream(XmlData) ;
InputSource inputSource = new InputSource(inputstream );
but saxexception is coming and also warning called
"java.io.StringBufferInputStream in java.io has been deprecated"
please help me.........i want to parse a Xml String using a Dom
parser......the parse function in dom parser takes
only input stream as argument.......This is not true of the DOM parser in Java 1.4. So you might want to get rid of your old parser and replace it by something more current. Or perhaps you are using 1.4 and you just didn't read all of the API docs.
Maybe you are looking for
-
Computer not recognizing my Ipod
I just got an ipod, again, and my computer won't recognize my ipod. Same with itunes or ipod updater. I keep installing and reinstalling and keep on putting the software that came with the ipod but it dosen't work. Dell Windows XP
-
MESSAGE_TYPE_X in Tcode VT01N
Hi, I have a system dump error in Tcode VT01N. There is a form named as XVTTK_READ in program FV56HF0X. FORM XVTTK_READ USING TKNUM LIKE VTTK-TKNUM. PERFORM XVTTK_EXIST USING TKNUM. IF sy-subrc NE 0. MESSAGE X002 WITH 'READ TABLE' 'XVTTK' VTT
-
Mapping SmartLists to an ASO Reporting App - Synchronization Difficulties
For those who have never done this before, I particiularly recommend John Goodwin's blog. http://john-goodwin.blogspot.co.uk/2010/06/1112-planning-mapping-reporting.html So, in this particular regard, I'm trying to map Smart Lists to dimensions I cre
-
In a very peculiar condition the following code gives ora-01858(a non-numeric character was found where a numeric was expected) in one environment whereas it doesnt give in other environment. In Environment 1 DEBUG - %%%%%%%% sbSQLDetailsMbrLp==selec
-
I installed Flip4Mac on my computer. Later, I upgraded to QT Pro. Now, when I try to view web embedded WMV files in Safari, the program crashes. Does anyone know why this might be happening? I didn't like QT Pro so I don't need/want it. I tried throw