Printout are printed to the right side of the paper
Printout are printed to the right side of the paper
all other settings are ok but the text is printed too much to the right side
hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Similar Messages
-
When I receive an email the page often has a certificate that I would like to print. Using the print function at the top of the page brings up the email as a page as it looks in my web email. When I hit the print button on that page there is always a 1 inch margin added to the printed page cutting off the right side of the desired page to be printed.
My printer accepts what ever I send it from word, pdf files as they appear on the screen, Why doe Firefox not send the same images as is displayed to the printer?
This seems to occur whenever the screen shows an image that is almost border to border and not text. When a margin is part of the email message or it is text this doesn't seem to occur.
HELP Please. I really need to be able to print what is displayed to print the proper document.
Thanks
Bob Ferguson
Sonoran Consulting & Finance, LLCSome pages add their own margin to the minimum margin set in Page Setup. First you might reduce the margin here:
Alt+f (displays the classic File menu) > Page Setup > Margins & Header/Footer tab
Second, you could try using Shrink to Fit. However, if the image is a background image rather than part of the content of the page, that might not have any effect. -
Updated to Firefox 18.0 on a MacBook running Mac OS 10.6. Non-static areas of the window (url & search boxes, main area of window, etc.) now display incorrectly, looking like what happens when a program thinks the image is (for example) 500 pixels wide, when its actually 512 pixels wide. Each line after the first starts with what's "leftover" from the line above it, resulting in an image that appears slanted, with what should be the right side of the image appearing on progressively more on the left side of the image. No other programs (including Safari) seem to be exhibiting this problem, and it appeared immediately after the upgrade. Minimizing the window into the Dock, then re-opening temporarily fixes the problem. As soon as I scroll the window, the problem reappears.
I am having the same problem. the screen slants to the right making the navigation impossible, also some fields like the address bar are complely messed up-looks like a no signal TV screen. I have tried to reinstall and remove the plist file. Am using firefox 18 on a intel macbook running 10.5 thanks for any help
-
There's no thumbnails to drag around except one on the left side of the page (the one that's open). The right side of the page lists every tab I have created.
Perhaps your problem is that '''you must save your browsing history''' in order to use app-tabs that would apply to groups as well but I did not test.
* http://img232.imageshack.us/img232/4928/clearcachew.png
I would suggest that if you do not save that stuff in bookmarks, that you will probably have a serious problem soon and lose your tabs, so if you count on them you could lose them. They should stand up to repeated restarts but I would not count of them as app-tabs myself, for one thing it is new, the other is I have to frequently wipe them out and restart, because I actively open new content into them and go back to the beginning of the tab history, and sometimes I can't, and sometimes I lose them by accidentally closing them -- and I must be able to close them in all manners that I close other tabs or I wouldn't be using them.
There are people who keep 200 tabs open through restarting, that is not for me, I try to clear out the tabs frequently.
That is what app-tabs are for as opposed to home pages, but I did have a problem when I tested with 120 since as app-tabs only about 65 can be seen at once even though I did reduce the width of app-tabs to about 2/3 the size that they were.. Problem I had when I restarted was that the window enlarged a bit beyond the screen, and my tab counter disappeared until I reduced the count to about 65. I do not allow tabs to scroll so you probably wouldn't have that problem.
I forgot to test home page with 60 tabs. I do have something set to 75 though have to check that. I tested with 60 pages as home page. Brought firefox down and backup with the 1 app-tab and 60 home pages the app-tab is the same size as the 60 normal tabs from home page.
Never used group-tabs by choice, since they messed me up I stay clear of them, I don't like them or anything large panoramic type of large thumbnails. -
Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to look?
Everyone who logs into Facebook on my Firefox has this problem however if we use Internet Explorer - facebook looks normal.If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
* Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above" -
Printing is pushed off the right side of the page
I uninstalled and reinstalled the printer driver on my epson 1400. No matter what size I try to print, everything is pushed off the right side of the page. This is only happening in photoshop. I am using a mac G4 on os x 10.4.11 Maybe someone else has had this problem. Thank you for your time.
Russellohfive wrote:
…then walah! …
Is that an Islamic incantation? Or did you mean voilà?
Just kidding. Glad you're up and running.
voilà
Also found in: Wikipedia
0.03 sec.
voi·là
(vwä-lä)
interj.Used to call attention to or express satisfaction with a thing shown or accomplished: Mix the ingredients, chill, andvoilà!a light, tasty dessert.
[French : voi, second person sing. imperative of voir, to see (from Old French; see voyeur) + là, there (from Old French la, lai, probably from Latin illc, by that way : ill; see al-1 in Indo-European roots + -ce, deictic particle).]
The American Heritage® Dictionary of the English Language, Fourth Edition copyright ©2000 by Houghton M -
sometimes on start all of the folders on the desktop are moved alphabetically to the right side of the screen, not as I had them organized on the screen before. also sometimes my folders when opened, move and resize themselves too...
Start with one of these:
-
I have a new wireless apple keyboard. I can only delete items that are to the left of the cursor using the delete key. What key do I use to delete items that are to the right side of the cursor? I have only one delete key.
My old apple wired keyboard has 2 delete keys that enabled me to easly delete data on either side of the cursor.
ThanksFn + Delete
-
Bookmarks - Hate the firefox version. Double click on star in the address window to bookmark the site and the pop-up window is too small and user unfriendly. And when in the bookmark window and have bookmarks on the right side of the screen there is no way to know which folder on the left you are actually in. Is there any way to upgrade the bookmarks feature. So frustrating I might actually go back to IE because of this. Thanks.
I have sort of the exact same problem. Extremely far away from user friendly
I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
All in all this gives a lot of changes just to enter an event.
Command N
I learnt from your input to use this fuction. At least that comes up with a one hour event as default. -
On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.
I don't actually have an answer for you, but ditto on changing things that aren't broken. Drives me crazy!!
-
I need to place icons (Next, Back, Print, Show) on the right side of the page.
The current solution is to use the following in the CSS.
div.options {
position:relative;
width:100%;
left: 860px;
padding:2%;
background:transparent !important;
However, this solution locks the icons to the right and they do not move when the window is sized:
Is there a responsive method I can use to accomplish my goal?
I am using RoboHelp 10.
Thanks - DanHello William,
Silly me. I’m using HTML5 – Desktop layout.
I know just enough HTML to get myself in trouble. I started with your “PnP-WH-Generic” layout and got it to this point:
Your first suggestion moves the icons to the right side of the screen. I need them to be as shown above.
Here’s the relevant (I believe) HTML:
And here’s what I believe is the applicable CSS info:
div.content
div.toolbarbuttons
div.toolbarbuttons > div
div.logo
div.searchsimple
div.options
div.printbutton
div.header div.showhidebutton {
height: 23px;
line-height: 23px;
float: left;
margin-top: 5px;
margin-left: .8em;
font-size: .8em;
padding: 0;
width: auto;
Thanks for your help!
Dan -
Black bar along the right side and the bottom of the screen- DV5-1007ca
I have DV5 1007ca running Vista Home Premium 32-bit.My computer seems to suddenly think my monitor is a different size. I have a 3-inch black bar down the right side of the screen and about a 1/4 inch black bar along the bottom. My windows are still fully functional and completely fill the portion of the screen that is active. There is no loss of image, it's just framed by the black bars. If I do a Print screen and paste it into a document, the black bars are not there. It's as if the computer thinks the screen is a different physical size. This situation is present all the time, even when starting up. This is what I have done so far: -adjusted screen resolution settings = no change-rolled back my display drivers = no change-re-updated my display drivers = no change-rolled back my BIOS = no change-re-updated my BIOS = no change-System recovery = no change I searched posts here and elsewhere but the results were inconclusive. A couple of posters reported a virtually identical problem and were told they needed to replace either their screens or their graphics cards. Unfortunately, none of those posters ever reported back so it was unclear whether or not the issue was resolved. I doubt it is the screen since screen problem symptoms usually involve bits of screen not working and parts of the display being lost. My screen seems to be working fine, it just thinks it's smaller than it is. The graphics card is highly suspect. What's funny is that a little while ago, I started up my computer without changing anything and all was well for about a week and then it went back to the same old issue. Any helpful advice would be appreciated. This issue is driving me nuts!
I found a real solution that is hardware related. I was given a laptop with this exact same problem for free since my friend thought it wasn't worth paying to repair a 3 year old laptop, and was dead for almost a year (I think they manufactured these in 2008, but HP has almost no specs or info about them, specially ours; DV5T-1100) I have the solution to this problem, and is a solution not found almost anywhere using Google, and HP support doesn't want to tell you, simply don't know, or would make them look bad. I was able to fix it myself by using a rework station (basically a dedicated hot air gun) that I used to "reflow" the graphics chipset's connection to the board (keep reading, because this method may vary on result details). This simply means that I opened the laptop, removed the copper heatsink connected to the fan to expose both the micro-processor, and the faulty graphics chipset, and started cutting soda cans, or thick tin foil to cover the areas AROUND the graphics chipset, and leave the graphics chipset exposed so that the really hot air would concentrate only on TOP of the graphics chipset. Then, I put the device on 220 degress, with the tip of the gun 2 inches over the chipset, and circled the gun around heating that sucker for 5 minutes, then I did a 3 minute rest to cool off, and a final 5 minutes reheat again. Luckily enough it WORKED!, and it has been working for almost 10 months with heavy use. HOWEVER... doing a "reflow" like this on a micro component isn't reallt a proper fix. Sure you may get lucky, and I read of instances where the fix lasted for years, but also just months. This is because the problem is the old solder that connects each "ball" point under the chip to the motherboard may have a micro ultra tiny imperfections and misconnections on a few or many of the connected points cause by a long period of overheat of the chip due to both, a very bad heatsink, and heatflow of heat inside the laptop, and also (and usually) really bad maintenance on the user's part by having a really dirty and dusty vents, overuse, and blocking the ventilation exhaust of the laptop itself over time. A proper fix of this chip issue is another process called "reballing", where they actually properly overheat that particular chipset so much using IR heat, and an expensive machine, to "loosen" the solder of all connections and remove the chip itself to both, clean the old solder on the chip, and the old solder left on the motherboard, and actually REPLACE all solder with new lead solder. However, this process has to be very precise (hence the machine), and it maybe costly, and there's also the fact that MANY scammers out there either never really do a true reballing, ans just do a reflow to scam you, or don't have the experience to do a proper reball of the chip. So whose at fault here? Uneducated users that neglect learning how to properly maintain a laptop off its main enemies (dust and heat) no matter how good the hardware heatsinks may be, or is it poor hardware design by the manufacturer, where other brands or even other families of series off the same brand have actually better noticeable hardware design than these DV series that are so notorious to overheat easier than others out there? Well, I don't know, but I do know that you should be VERY careful having these laptops repaired and be scammed, because hey! Even so called "refurbished" or even so called "brand new" entire motherboard out there on Ebay are just bad reflow jobs with little to no warranty on them on purpose, to only last a few months on purpose. So, watch out, and THINK! before spending money on a beat up poor donkey.
-
The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?
Short answer:
Click Hide Song(s), it is what you wanted to do...
Long answer:
iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
tt2 -
Using values in the right side of the shuttle on another page.
Hello All,
On page 1 I have a shuttle item. I select some values and move them to the right side of the shuttle. Now I need to navigate to a second page (currently I'm controlling the navigation with a button) and pass the values from the right side of the shuttle on page 1 over to page 2. How do I get the values from the right side of the shuttle on page one over to page 2. If it's easier to use a pop-up than a second page 2 I'd love to do that, but same problem, how to use the values from the right side of the shuttle?
I've tried setting up a shuttle on page 2 and setting the values on the URL re-direct but, no luck! I also tried a PL/SQL (On Load- Before Header) page process on the second page (see code below) where I try to "work with" the shuttle values, also no luck.
Any ideas?
Thanks Much!
declare
l_selected APEX_APPLICATION_GLOBAL.VC_ARR2;
l_set_id number;
l_loopcount PLS_INTEGER := 0;
BEGIN
l_selected := APEX_UTIL.STRING_TO_TABLE(:P6_UNGROUPED_SETS);
-- Loop through the array of selected fulfillment sets
FOR i IN 1.. NVL(l_selected.count,0) LOOP
l_loopcount := l_loopcount +1;
l_set_id := l_selected (i);
INSERT INTO TEST2
(SETS)
VALUES
(l_set_id);
END LOOP; -- Loop through Array
:p7_loopcount := l_loopcount;
end; -- Main EndHello
>> I've tried setting up a shuttle on page 2 and setting the values on the URL re-direct but, no luck!
The value of a Shuttle item is a colon-delimited string. As colon is used as a special character in the APEX URLs (what we call the f?p notation) you can’t pass a Shuttle value using a URL (similar to the limitation of passing a traditional time notation like 10:00 in a URL, for the same reason).
Whenever you are submitting a page, APEX automatically saves the value of all the page items in session state, and it makes them available on any other page in the application. You can access them by using the bind variable notation with the item name (e.g. :P1_SHUTTLE1).
In your case, all you need to do is to submit page 1 (even if you don’t run any after submit activities) and then you can use the Shuttle item value from page 1 as the default value of the Shuttle item on page 2, or use this value in any other way on page 2. Just remember that the value is a colon-delimited string and for any other use other than a Shuttle default value, you most likely need to parse it first.
Regards,
Arie.
♦ Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
♦ Author of Oracle Application Express 3.2 – The Essentials and More -
When I click on a picture or map in i.e. Kijiji real estate pages, Firefox opens it all crunched to the right side of the page. How can I correct this?
For instance I view an apartment ad which has various pictures attached. It says click on the pictures to see an enlarged version. FF opens the page however most of the page is blank and the picture appears to be pushed to the right side of the page and shows as if it has been scrunched agains the right side not showing the whole picture.
What Can I do to correct this?I see that you have increased some font sizes considerably.
* font.size.fixed.x-western: 20
* font.size.variable.x-western: 22
This can effect margins when the website specifies these as em values and cause content to shift.
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use the NoSquint extension to set font size (text/page zoom) and text color on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
Note that your System Details List shows multiple Flash plugins.
* Shockwave Flash 16.0 r0
*Shockwave Flash 12.0 r0
You can find the installation path of all plugins on the <b>about:plugins</b> page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\
Your System Details list shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
You can check its content with a plain text editor (right-click: Open with) if you didn't create this file yourself.
The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
You can delete this user.js and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
Maybe you are looking for
-
Hi. I'm setting up a communication with (JMS adapter -> XI -> IDoc adapter). No w to the problem. When we send the message with the IDoc adapter we get the following error. Message has error status on outbd. side We can see this message when I put my
-
Buttons not behaving after decompile.
Hi all, It's difficult to ask this question without posting the source file to see - but if I explain the issues... Basically I can't for the life of me work out why my buttons aren't behaving correctly. I received a job from a client to make some up
-
hello, i have made a simple shopping cart which goes through the following stage: 1st stage: // Additions to the shopping cart HttpSession clientSession = request.getSession( true ); ShoppingCart vBasket = (ShoppingCart)clientSession.getValue("thecar
-
Stack animation in Lightroom 1.1
Lightroom 1.1 has a nice feature while stacking images. An animation flips the images together. That looks nice but slows the process down, because you need to wait for the next stack until the animation has been finished. Does someone has an idea ho
-
Flash player crash in IE and Firefox
Hi, I develop a Web site in flash and I want to optimize it for the flash player 9 and later version. But I have a crash problem in flash player 9 and 10 version in IE 7 and Firefox 2 and 3 except the very last version (10.0.22.87) I also have the pr