Printout of the excise invoice

Dear Guru's,
I have maintained the Outpot of J1I0 in the Nace for that particular Customer
Still in J1ip. The Excise invoice is showing no output type
and apperaing in red.
How can this be solved.
regards,
A S

Hi,
You will also have to assign the same output type J1IO in VF02 (Go to ->Headere->Output),then the system will not display the "No output type msg.in J1IP.
Edited by: PJ on Oct 17, 2008 10:33 AM

Similar Messages

Change mode of the excise invoice is showing zero excise values

H ifriends,
The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
Thanks
Sasi

s

The excise invoice is generatiing with inconsistant effect.

Dear All,
in my client i m having the excise invoice generation with the billing document at single step.
but some there is ome in consistancy in this. some times when we do it in single process the excise invoice is not getting generated.
it means if we are processing 1000 docuemnts its not processing for 300 documents.and when we are going to do it mannualy then also it not showing in due list of excise invoice creation in J1IIN.
please suggest what may be the probable reason for this.
Thanks with Regards
Subrat.

Hi,
To determine the automatic excise invoice have to maintain the default excise groups and series group, even thou every combination is there ,for your non generated invoices. Please sit with abaper and debug in j1iin by giving the billing document number in create mode.
regards

Reg: How to capture the Excise Invoice with respect to Inbound delivery

Hi All,
Please give the process follow for capturing the excise invoice with respect to inbound delivery.
Thanks & Regards
Siva

Hi Siva,
Please check this link
CIN with Example..?
Regards,
Bijoy Kumar

Difference in the excise invoice and Billing document value

HI Experts,
I am working in a Excise based CIN scenario.
I am Abaper and wanted to solve an issue.
basically, We are creating billing document and then creating an excise invoice. but there is a diff between the excise invoice and billing value.
Any input will really help thanks...

hi Lakshmipathi,
Sorry for the delay in replying.
This particular scenario happened to only some invoices which were generated in a day.
After that particular day, this didnt happen but would like to know why it has happened since we didnt want the same to happen again in future.
it is not the billing value. its it billing duty applied on the value.
Please help.

Not able to cancel the Excise invoice for STO process

Hi All,
In STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the same through J1IS with the internal Doc No. Here the error is document is complete.
Please guide how to cancel the same.

Hi,
STO has been created either through MM route or through SD-MM route.
In MM route, the process is as below,
You create PO, followed by MB1B (Transfer posting) , then followed by J1IS (Excise Invoice).
In SD-MM route the process is as below,
You create PO, followed by VL10B , then VF01, then followed by J1IIN (Excise Invoice from Factory).
Normally, when you create Excise Invoice through J1IIN, it is automatically released to Accounting.
In your case, I feel it has not yet been released to accounting and I hope, Excise Invoice has been created through J1IS.
In MM route, you need to release the Excise doc to Accounting.
In that case, you need to go for J1IV and release the same to accounting.
Find out the Internal document number from the Excise Invoice and with the reference of this Internal document number release it to Accounting through t.code J1IV.
Now, once it is released to accounting, you should be able to cancel it through J1IH or J1IS.
Please let me know if any further problem you are facing.
Regards
Pradyumna

Issue in the Excise Invoice

Hi
SD GURUS
The requirement is client want to see the accounting entries of Education Cess and Secondry Cess in the accounting document after processing the J1iiN.
They are processing the J1iiN document with the excise invoice type as '' NO BOND '' . After clicking the utilization button while processing in j1iiN the Excise duty, Secondry Cess and Education Cess get disappeared. But in the initial screen after entering the BILLING DOCUMENT, POSTING DATE in J1iiN the Excise duty, Secondry Cess and Education Cess are getting reflected in the appropriate fields.
If we see the accounting document after processing the J1iiN only the Excise Duty is getting reflected the remaining Secondry Cess and Education Cess is not getting reflected.
Kindly Guide me in this.
ANAND

It is possible that you may have to apply a SAP Note. I had faced similar issue in one of my assignment and the issue was resolved by applying a Note.
I do not remember the note number. It would be great if you could look for SAP Note, alternatively If you raise a SAP OSS message, you are likely to get response with the details of Note number.
Regards,
Rajesh Banka

User Exit while saving the Excise Invoice in J1IIN

Dear All,
I want know whether anu User Exits are there while saving the Excise Invoice in J1IIN.
The "scenario" here is as follows:
---I will create an invoice(Commercial) in VF01. Suppose I got a number 1234(This is Billing Document number).
---Now I will go to J1IIN and create an Excise Invoice by reffering to the VF01 Billing Doc Number.I will enter all the details. Then I will Save it. While saving I want to check the following aspect:
I want to compare the Billing Document Number and Excise Invoice Number and give error if both the numbers are not same.
---That is I want to see that Excise Invoice and Billng Document number should be same.
I need your suggestion in the above scenario.
I will definitely reward if problem is solved.
Regards,
Raj Kumar Reddy.

Hi Raj,
Here is a list of available userexits for transaction J1IIN :
J_1I7_USEREXIT_DEPOT_BEF_SAVE
J_1I7_USEREXIT_DUTY_IN_EXPORT
J_1I7_USEREXIT_EXCISE_BEF_SAV
J_1I7_USEREXIT_EXGRP_DETERM
J_1I7_USEREXIT_SERGRP_DETERM
hope they are of some use.
Regards,
Philip Johannesen

Cancel the excise invoice in Intra company stock transfer

Dear Gurus,
I have one issue in CIN.
The following are the my sequence of operation.
Intra company stock transfer.
1. Purchase order with UB. (from plant A)
2. Delivery ( from plant B),
3. PGI ( from plant B),
4.Excise Invoice ( from plant B to A),
5. Billing ( from plant B),
6. Creating Excise Invoice without purchase order Manually (from plant A),
after PGI and Before MIGO.
7. MIGO.
Now i want to cancel the Excise invoice in Plant A.
how can i cancel the excise invoice.?
kindly provide the valid information.
Thanks.
Best Regards
Anbu

In T.Code: J1IIN, there is an option of deleting / cancelling the Excise Invoice. On the top most left hand side (after entering the Excise Invoice number) select Excise Invoice --> Cancel / Delete.
Here it is possible to cancel the Excise Invoice.
Regards,
Rajesh Banka

Maintain Vendor for the excise invoice

Dear Guru's,
While creating goods receipt (In STO Process), I am facing the following error,
"Maintain Vendor for the excise invoice"
How to solve this one.
Regards,
CS

Hi CS,
Check whether you had maintained the vendor(supplying plant) in J1ID and also check whether excise indicator 1 is there.
And also check whether vendor (supplying plant ) is linked with customer in vendor master in Account control tab and also check whether vendor master (supplying plant) is linked to your customer master in control data ....
Hope this will serve you..
regards,
Patil

Reg Excise Duty is not coming in the Excise invoice

Hi all,
We are doing STO senerio between two plants while doing commercial invoice the EXcise Duty ZMOD and ZCES is determining in the commercial invoice but when we do the Excise invoice in J1IIN the ZMOD and ZCES values are not comming.
So can you please assist to over come this issue
Please give replay ASAP,
Regards,
Murali.

Hi Alpesh,
Thank you for your replay I already checked that the A/R BED,SED CESS condition types are maintaining to that Tax procedure.
Can you please assist
Regards,
Murali.

Error :Maintain pricing conditions for the material for the excise invoice

Hi
i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
Message no. 8I629" can some body can help me.
with regards
Narendra kumar

Hi,
goto tcode fv11 u have to maintained the condition.
first enter the condition type like jmop -
then enter, next screen u have the select the below comination.
select the plant/vendor/material base u have to maintain the conditions.
Thank's
MVS

Reverse the material document before cancelling the excise invoice.

Dear Experts,
While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
MINI

Hello
follow the below steps
1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
Thus the excise postings are reversed.
3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
above the procedure right. you will get this updation excise registers also
Laxman

Higher education cess not appearing in the excise invoice

Hello experts,I am presently in a support project of a big aluminium project in india,
my question is while i am creating the excise invoice using the transaction j1iin then with respect to the proforma invoice,what is happening is that the excise invoice is appearing in the create mode of the excise invoice,but once while we are going to save the document and after opening in the change mode,i see the document does not contain the higher education cess.and also the transactionis not hitting the gl account
pls guide me as soon as possible
Thanking you,
Anshuman.chakraborty

Dear Anshuman
Please make use of the search option b4 posting any question as this particular topic was discussed repeatedly in the last one week.
Meanwhile answering to your question, please ensure that your system is loaded with latest patch updation.
thanks
G. Lakshmipathi

Error while saving the excise invoice

Hi All,
I am getting the following error while saving the excise invoice.
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.
I have read all the posts with regards to the error before, however still after doing the required settings I am getting the error. Please let me know for the same.
Kind Regards
Atul Keshav

Dear All,
The issue stands resolved please find below the required settings which need to be done.
You need to maintain the following entries in J_1ITRNACC table
100 DLFC 01 CR PLAAED
100 DLFC 01 CR PLABED
100 DLFC 01 CR PLACESS
100 DLFC 01 CR PLASED
100 DLFC 01 CR PLAAT1
100 DLFC 01 CR RG23AAt1
100 DLFC 01 CR RG23AED
100 DLFC 01 CR RG23BED
100 DLFC 01 CR RG23SED
100 DLFC 01 DR MSUSP
Also the table J_1ITRNACC should include entries for GRPO, CAPE, DIEX, EWPO,
TR6C with subtransaction type 01.
We need to maintain GL Accounts accordingly in the table J_1IEXCACC.
If still the error persists then you need to apply the following notes.
1018071
978186
1032813
The SAP note 1032813 contains the correction for the program MJ1IINF01
you will have to apply this manually.
Kind Regards
Atul Keshav

Printout of the excise invoice

Similar Messages

Maybe you are looking for