Printouts in Pre-Printed Forms
Hi all,
Please advise, if we can take printouts of invoice in a pre-printed forms.
Thanks,
Balaji
Hi, Arshdeep Singh
cld u explanie breifly plz.
we have 10x12 formate in inches how we can set in PLD. in
tally thr TDL we can set exactly what we want. here is there
any tool we have ? in ALD we have inches only. only problem
we are facing to adgust in repetitive area 0 here feilds are not
printing exactly in particular cell. how we can adjust ? is there
any to do this?
Similar Messages
-
This template will be used to type in information that will then be printed on an agency's official, barcoded form loaded in a printer (instead of blank paper.) Only the user-entered info should print on the pre-printed form. Users will use Adobe Reader to complete their templates; they do not have Acrobat. Thank you!
Use the template as non-printable background and add the form fields.
-
Pre-printed forms on IBM 5577 dot printer
Dear all,
I was wondering if there is any SAP tool in order to use pre-printed forms (with specific layout) on IBM 5577 dot printer which would allow to speciy a pre-defined layout.
Or do I have to define for each field the position on the pre-printed form thanks to SAPscript editor?
Regards.HI Cany,
There is no such tool to identify the problem .In scripts and smartforms we have to define the layout pertaining to printer and its configuration settings.once the layout is defined and the printer is defined during the printing the printing begins automatically.in ur case u r talking about pre printed forms like application forms like cases, for this we have to know the length of the form initially and take care to identify the length of the field and also position.Hope u understand this. -
Printing in a Pre-printed Form
Hi,
One of my jsp page is suppose to generate another page to be printed in a pre-printed form....is it possible?? Could you give me any Idea how??
thank you very much
...spryt :DYou would have to give the end user a configuration screen where you set the coordinates and sizes of the data fields you wish to print on.
Commonly, there is a test screen where you can do an alighnment test to make sure all the fields are lined up and maxed out.
Then during real use, you print real data. Simple. -
Printing from APEX onto pre printed forms - not PDF
Hi
What is the best solution within APEX for printing. I am looking to print out data within an interactive report record onto a piece of pre printed stationary. So fields from the database will need to be positioned on certain positions on the print out
How can this be achieved? I have seen examples generating a PDF but I do not want a PDF to be generated or stored when the page has been printed.Or Oracle Reports as a cheaper option, if your infrastructure is suitable.
Done that for pre-printed forms before - pixel perfect, just not for APEX. But it's easy to call Oracle Reports from APEX. -
I am printing W2's on a pre printed form and some of the fields are randomly moving up and down. Some forms print perfect others are all over the place. Anyone have a suggestion.
Thanks,Hi,
Please check if you have the form online from the state/agency providing this form. If it is online you could try to open this form with Adobe Reader and print it.
If you have a hardcopy pre-printed form, then you will need to scan it to your PC/system and then open the scanned form with Adobe Reader and print it.
Hope this helps,
Lucia -
hi everybody
someone can help me..??
I need to print some data in a paper pre-printed.
(style like a bill). known as someone I can develop, so that people only write the missing data in preprinted paper
Thanks for your help
[email protected]hi everybody
someone can help me..??
I need to print some data in a paper pre-printed.
(style like a bill). known as someone I can develop, so that people only write the missing data in preprinted paper
Thanks for your help
[email protected] -
Pre-Printed Form, But Movable
First the preliminaries:
My setup and tools -
- Windows Platform
- Acrobat XI
- LiveCycle Designer ES4
- InDesign CS6
We have a 1 page, preprinted form that we need to overlay with formfield data.
I took a spec PDF of the form and adjusted in within InDesign. I saved the PDF, and opened in within LiveCycle Designer. I created all of the form fields that were needed for the form, and saved the PDF as static.
I use vb and a jso to first open a new copy of the PDF and then fill each field. Then I open the filled PDF and I print the form fields only.
THE PROBLEM
Different printers print the form fields in different locations. I always choose "Actual Size", but when our different offices print to the different printers, there are slight variations in the x and y placement of the fields (left to right and up and down).
I envision a pair of fields (one for x and one for y) that do not print, but contain a number that specifies a correction factor, and causes the fields to move together. How can I effect a solution the most closely matches what I am looking for?
Thank you.True. But I'm looking for a solution going forward. A way in which I can create forms in the future that accomplish what I need.
I could even recreate the form I already have in Acrobat XI if that would get me the adaptability I need.
I have taken your advice though. I've already post in the LiveCycle forum for their perspective on things. Thank you for that.
Thanks. -
Printing on a pre printed stationery
Hi,
I am trying to print data on a pre printed stationery. On one physical page two copies (1+1) of report is printed horizontally side by side. On each logical page there is repeating frame that displays 4 rows of data across the page.Now as soon as the number of records become > 4, the 5 th record instead of moving to next physical page, overlaps and sets on the logical page on the same physical. what could be done such that the 5 th record and onwards prints on the next physical page alongwith the copy of the 5 th record also displayed on the next logical page.
thanks
Prashant MishraNot sure if I fully understand your description, you might like to give an example of what data you have and what you want on each page.
However, for pre-printed forms, you typically use a fixed size frame to define the area that a repeating frame can print into. Alternatively you can use the "max records per page" property if you can guarantee that each record will only take up a specific amount of sapce.
Where physical vs. logical pages are concerned. You can only have multiple physical pages making up a single logical page. In your case, you seem to want to have multiple logical pages for each physical page. Since Reports will insert page breaks after each logical page, it will be difficult to do this.
If you need to get two sets of records onto a single physical page use an "across->down" repeating frame for a single repeating frame that encompasses one half of your physical (and logical) page. -
Generating smart form on a pre-printed paper
Hi, Can any one let me know how to develop a smart forms on a pre-pinted paper..? As i am facing lot of issues in layout alignment..
hi bhanu,
there is no difference on samrtfroms printing in pre-printed or normal paper .
just you have to set text in small windows according to pre-printed page.
regards -
Trying to print form fields only
I have made a fillable form with LiveCycle Designer, it is a 2 page form that my customer will receive by email, fill out and then feeds into a regular ink jet printer to print off fields onto an already pre-printed page they have in their office (they are basically filling out their name, address, etc contact information to print onto a brochure that is pre-printed) My client will use Acrobat Reader to fill in the form. Does anyone know a way to do this? I have read about making the background non-printable, or non-visible, but my background is an already created PDF that I have imported (with the forms built on top of it in LiveCycle). Doesn't seem to work unless I import it as an EPS.
I also have Adobe Acrobat 8 Professional. Is there a different way I should be doing this instead of LiveCycle? I have tried to import the PDF background as an EPS, but the quality makes it really bad and I want the professional quality of the pdf that I already have built, as I have 10 of these to do and the PDFs are already done.
I have been trying to work this out for 2 weeks and still not getting anywhere. Any help would be greatly appreciated.Hi,
OK I am back at the desk.
I have checked the help files for Acrobat 8 Pro and Acrobat 9 Pro and it appears that the ability to "import as a layer" was added in version 9. Sorry.
You can check out the help file here: http://help.adobe.com/en_US/Acrobat/8.0/Professional/index.html and go to Editing PDFs > Layers.
If the original PDF was generated from InDesign you may still be able to get the layers into the PDF: Help file
"To retain layers when you convert InDesign CS or later documents to PDF, make sure that Compatibility is set to Acrobat 6 (PDF 1.5) and that Create Acrobat Layers is selected in the Export PDF dialog box"
The last thing I can suggest (and I believe you can do this in Acrobat 8) is to start off with the blank PDF and from the Forms menu add a button to the page.
Resize the button to the full page and then right click on the button and get its properties.
The screen shots should look similar to v8. I am just going to highlight some of the setting you should set for the background button.
In particular make sure that the button behaviour is set to NONE in the Options tab.
Hope that helps,
Niall -
Hi,
I have created a print form using Adobe LiveCycle designer 7.1 on SAP ECC 6.0 version. The requirement is to mask first 5 characters of a text field (SSN) on the form while displaying but when printed it should print whole SSN.I have used Javascript option to run at client. In the initialize event, I am changing the value(rawValue) to the masked one(for eg. XXXXX9999).In the prePrint event I am passing the correct value of SSN and again in the postPrint event I am changing the value of SSN to the masked one.The form type is set to Print form and Dynamic PDF.I have created a custom program in SAP to creae PDF and download on to the local machine.
Now the issue is...
1)When I opened the downloaded PDF and pressed the print button, the whole document goes blank. This is happening in Adobe Reader 7.0.9.
2) It works as expected with Adobe Reader 8.1.1 but when I close the document it gives error message like - instruction 0XX.. could not be written to memory.
I have also tried to hide to set the presence attribute to "visible" in prePrint event and to "invisible" in postPrint event instead of changing the value of the field but same issue is happening with Adobe Reader version 7.0.9.
I need this to work on any version(7.x or 8.x) of Adobe Reader. Please help.
Thanks,
RaghuDear,
print preview and physical printout are two different things.
PrintPreview:
The data stream will be sent to the frontend and rendered with windows-fonts etc (for backend prints a simulation).
Printout:
Frontend: You need a printer, that maps the character, you have to use SAPWIN or SAPWINCF when using cascading fonts. The rendering will be done in the windows spooler.
Backend: Your printer needs also a mapping (look like something with UTF8). Also the printer needs the fonts installed because the rendering will be done in the printer!
If you use the pdf-printer in SAP, you need to upload all necessary fonts (TTF) for the pdf-composer. Also you need a unicode pdf printer for that.
Regards,
Christian -
Why is there not an option to only print form data in Adobe XI?
I have created a form in Adobe Acrobat XI Pro and saved it. Then I want to open it in Adobe Reader, fill it in and then only print the form data but there is not an option to only print form data in Adobe Reader XI. I'm not sure if it is in the way I created the form or something else. Any help will greatly appreciated. Thanks!
Basically you need to place the file's contents on a non-printing layer. Try this:
Create a new blank file and open the Layers panel on the left.
Click the Options button and select Import As Layer.
Select your pre-existing PDF file (maybe save a copy of it without the form fields first and use that version).
Right-click the layer you created and select Properties. Change the layer's Print option to "Never Prints".
Now copy the fields from the other file and place them in their correct location on the page.
Save the file and you have a file that can be used to print only the form fields data, even in Reader.
This process can be automated, by the way, but that would require a script. -
Pls Help! Adobe reader 9.0+ generated barcodes on pre-print is problem
hi to all,
I have a really strange problem and would like to share with you.
Im generating the barcodes on the pre-print event, using LiveCycle Designer 8.0.
Everything is ok when im trying to generate 2/3/4 barcodes in my form.
The PROBLEM is if I decide to add more than 5 barcodes in my form and try to print it.
Then - when I decide to print the form and to fill the information in my barcodes - the Acrobat Reader is just closed.
No error alert..just closed. When i debugged the problem I saw that generating of barcodes is starting, but if there are more than 5 barcodes,
the adobe reader closed before all barcodes to been generating.
I do think about no enough memory, or something like that..but have no idea really what’s that.
Do u have any idea what’s that problem..
thanks in advance for yr time
RegardsTry and print the PDF as an image.
Also when you send this to someone else are hey able to print without an issue?
Have you've tried another printer? -
Open Adobe Print Form from ALV Int. Rprt using the XSTRING already present
Hello Friends,
I have a typicall issue that how to open a Adobe Print Form when a user double clicks in the ALV Report. Here when the user double clicks in the ALV Interactive Report using the unique ID I am getting the Adobe Form from a FTP location in the Form of XSTRING, now using the ABAP ADOBE PRINT FORM not using WebDynpro Application, I need to process this XSTRING and show up the Adobe Print Form.
OR
Is there a way to send the XSTRING to the Output Device or Printer to Display the PDF Form.
Friends please help me in solving this issue.
Thanks and Regards
Pradeep Goli
Edited by: Pradeep Goli on Mar 19, 2009 1:49 PM
Edited by: Pradeep Goli on Mar 19, 2009 2:51 PMHi Pradeep Goli,
it is possible to show PDF in SAP GUI.
Michal
REPORT ZTEST_DISPLAY_PDF.
* You must create dynpro 500 with custom control named HTML.
* In this custom control will be displayed PDF.
DATA: g_pdf TYPE xstring,
pdf_my_container TYPE REF TO cl_gui_custom_container,
pdf_html_control TYPE REF TO cl_gui_html_viewer.
START-OF-SELECTION.
PERFORM create_and_display.
FORM create_and_display.
*** Your code fo filling g_pdf
CALL SCREEN '500'.
ENDFORM.
* PDF preview in HTML control
module html_control output.
perform pbo_html_control.
endmodule.
module html_control input.
perform pai_html_control.
endmodule.
* PAI
FORM pai_html_control.
SET SCREEN '0'.
ENDFORM.
* Showing of PDF
FORM pbo_html_control.
DATA: l_pdf_alignment TYPE i,
l_count TYPE i,
l_noprint TYPE fpboolean,
l_noarc TYPE fpboolean,
l_noprintarc TYPE fpboolean.
* CLEAR: fcode.
SET PF-STATUS 'VIEW_PDF'.
* container
IF pdf_my_container IS INITIAL.
CREATE OBJECT pdf_my_container
EXPORTING
container_name = 'HTML'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE e150(FPRUNX).
RETURN.
ENDIF.
ENDIF.
* html control
IF pdf_html_control IS INITIAL.
CREATE OBJECT pdf_html_control
EXPORTING
parent = pdf_my_container
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE e150(FPRUNX).
RETURN.
ENDIF.
* alignment
l_pdf_alignment = pdf_html_control->align_at_left +
pdf_html_control->align_at_right +
pdf_html_control->align_at_top +
pdf_html_control->align_at_bottom.
CALL METHOD pdf_html_control->set_alignment
EXPORTING
alignment = l_pdf_alignment
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE e150(FPRUNX).
RETURN.
ENDIF.
ENDIF.
PERFORM pdf_show USING g_pdf.
ENDFORM.
FORM pdf_show USING p_pdf_data TYPE xstring.
STATICS: ls_url TYPE i.
TYPES: lt_pdf_table(1000) TYPE x.
DATA: l_myurl(80) TYPE c,
l_url(80) TYPE c,
l_pdf_data TYPE STANDARD TABLE OF lt_pdf_table,
l_pdf_size TYPE i,
l_pdf_line TYPE lt_pdf_table,
l_offset TYPE i,
l_len TYPE i.
l_pdf_size = XSTRLEN( p_pdf_data ).
l_len = l_pdf_size.
WHILE l_len >= 1000.
l_pdf_line = p_pdf_data+l_offset(1000).
APPEND l_pdf_line TO l_pdf_data.
ADD 1000 TO l_offset.
SUBTRACT 1000 FROM l_len.
ENDWHILE.
IF l_len > 0.
l_pdf_line = p_pdf_data+l_offset(l_len).
APPEND l_pdf_line TO l_pdf_data.
ENDIF.
ADD 1 TO ls_url.
l_myurl(8) = ls_url.
CONCATENATE l_myurl '.pdf' INTO l_myurl.
SHIFT l_myurl LEFT DELETING LEADING space.
CALL METHOD pdf_html_control->load_data
EXPORTING
url = l_myurl
size = l_pdf_size
type = 'application' "#EC NOTEXT
subtype = 'pdf' "#EC NOTEXT
IMPORTING
assigned_url = l_url
CHANGING
data_table = l_pdf_data
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE e152(FPRUNX).
RETURN.
ENDIF.
* show data
CALL METHOD pdf_html_control->show_data
EXPORTING
url = l_url
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE e152(FPRUNX).
RETURN.
ENDIF.
ENDFORM.
Maybe you are looking for
-
My volume is lock what do i use to unlock?
My Ipod Classic Volume is lock,just bought it today,what numbers will unlock volume?
-
I lost the computer I synced my 3Gs with. Will I lose my photos and music if I sync to a new computer?
-
I'm still having connectivity issues
And now, an Iphoto update was interupted while downloading and is now corrupted. Can someone please help me fix the connectivity issue once and for all and guide me to correcting Iphoto. Appreciate your help. Cheers, MK James
-
VPN DNS (no clients) not working after installing SL; resolver w/ no domain
Unfortunately, Snow Leopard has broken VPN DNS (thanks go out to Apple's QA department). I've tried several methods of "fixing it", but I end up seeing the following issue (output from scutil --dns): DNS configuration resolver #1 domain : xxxx.cc nam
-
Problems pinging pointbase Database
Hello this is my problem Im working with the default version of PointBase database that comes with the SJAS boundle. Im trying to access the sample database throgh the jndi service and these are the steps that i did: 1.- i created a new connection po