Prints from Zebra printers can't be correctly displayed why?

SAP allows me to display previews of Zebra prints, but it only shows some numbers and symbols not the actual print as when we physically print it.
Mainly requesting: information about what configuration in SAP should I check or configure to fix this, how to have a virtual Zebra printer in SAP that allows to display Zebra prints in SAP Without needed to physically print them.
Help me to fix.
Regards
Venkat

Hi Venkatesan,
If you are able to see preview correctly and not getting it correct on physical printer then you need to change "device type" of your printer through tcode SPAD. Please take help of your basis team.
In most of the cases, specific device types are available based on printer make and model.

Similar Messages

  • Printing from iphone 4s, can you print without using airprint enabled printers

    printing from iphone 4s, can you print without using airprint enabled printers?

    There are other apps that allow printing to various apps.
    I use ePrint; works great for my work and home printers.

  • Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ?

    Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ?  I use HP wireless printer .

    Are you sure you have the right printer?
    In UNIX/OSX printers are virtual links to devices and even with the same name can be trying to reach a printer via another network address, so it thinks it is another printer.
    Peter

  • I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

    I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • I WOULD LIKE TO ORDER AND SEND MY ANNUAL CALENDAR TO USA DIRECTLY FROM THE PRINTERS, CAN YOU HELP ME?

    I WOULDLIKE TO ORDER AND SEND MY ANNUAL CALENDAR TO USA DIRECTLY FROM THE PRINTERS, CAN YOU HELP ME?
    GETTING THE OTHER CALENDARS SENT HOME FOR THE FAMILY IS EASY BUT THOUGHT I'D SAVE TIME AND $$ DOING THE LAST ONE DIRECT FROM THE PRINTERS.  I KNOW THERE IS A BUTTON FOR ORDERING FROM WHICH REGION? BUT CANNOT REMEMBER WHERE TO FIND IT...

    I KNOW THERE IS A BUTTON FOR ORDERING FROM WHICH REGION?
    iPhoto preferences > Advanced > Print Products Store
    Set it to the country of the Store you want to order from.
    The country in this setting needs to be the same as the country of your billing address and shipping address. And the AppleiD and Credit card have to be valid in that country.

  • Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

    Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

    In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

  • I just installed a new Lynksys router and now can not print from iPad but can from iPhone

    i just install a new Lynksys router now i can't print from iPad but can from iPhone.  with iPad can't find printer.  if i reinstall printer on the router it will print 1-3 times then can't find printer but i can print from iPhone

    What model, version Linksys router? Is the firmware up-to-date?
    What iOS levels are you running on iPad, iPhone?
    What make, model printer are you using? Is the firmware up-to-date?

  • I can not print from Firefox, but can from all other browsers and applications (such as MS Word, notepad, etc.). I get a print error on the printing monitor like it's a spooling problem.

    This is a recent development but I can not print anything from within Firefox. The print functions open normally, it is going to the correct printer which works..I can print from other browsers and applications. It acts like it is spooling and then a print error occurs and it won't print. I closed and reopened Firefox, opened it in safe mode, cleaned out history/cache/cookies, and rebooted twice. Nothing makes any difference. Also tried printing from the print preview which had the same result. I can print from all other browsers and applications without a problem so it must be within Firefox.

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Cant print from Word. Can from anywhere else.

    Just as the title says. my dads printer prints everything from websites or email but it wont print from a word document. you press print and the little printer setup doesnt pop up. even if i try to print from his Mini to my wireless printer it doesnt work...anybody know why?

    Well, if it really is Word v.X, then we can rule out Classic as the origin of your problem. Since it's a G4, we can rule out Rosetta emulation as well.
    Unfortunately, I'm not a Word/Ms Office expert, since I use NeoOffice, and I'm not a specialist of priting issues either, so you'll probably have to wait for someone who is more knowledgeable than myself in these areas.
    In the meantime, are you sure you have the latest version of Office X ? If you're not sure, you can find updates on Microsoft's website.

  • When you print from an ipad, can you print to the 8x11 tray?

    My grandfather has an ipad and an hp photosmart printer. When we print from a computer, it goes straight to the 8x11 tray and prints on normal sized paper. When we print from the ipad it goes straight to the photo tray and prints on photo paper. I know that for iOS, airprint doesn't support tray selection and just prints to whatever tray 1 is. Is there a way to change it on the printer so that the 8x11 tray reads as tray 1 and we can print from the ipad to the regular printer paper? We've tried just removing the photo tray, and that doesn't work.

    Hi there,
    Well luckily you dont have to go changing any settings to default specific trays to different settings. Just download the HP Home and Biz app from the app store for free. It has the ability to set the paper size used
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Safari 5.1.7, OSX 10.7.4, can't print from Safari but can from other apps

    I recently upgraded the Safari program as well as the recent OSX update.
    I also upgraded Adobe reader from 8.0 to Adobe Reader X and removed Reader 8 by dragging it to the trash.
    Now the Safari print dialog displays "No Printer Selected" and will not allow a printer to be selected. I do get a PDE error that says that the AdobePDFPDE800 bundle isn't working. But I've no clue how to access and delete it.
    The printer is a Ricoh Aficio CL4000DN. PPD's have been reinstalled today.
    The is NO PROBLEM printing from any other application. All Apple aplications other than Safari print as well as applications from other companies.
    any ideas?

    Unless you really need Reader, I suggest you uninstall it according to Adobe's instructions. It's dreadful. If you do need it, ask for help in the Adobe user forums.

  • When I print from Gmail, I can't return to my e-mail and have to open another browser window. The back button become inactive.

    While using Gmail, when I print e-mail I can't return to my inbox or any other Gmail option. I am left "stuck" at the print window and have to open another browser window each time and go back into e-mail. Usually, I am still logged in after doing this, but sometimes I have to login to e-mail again. Thanks.

    How are you trying to change it ?
    You should be able to log out of an account by clicking on it at the top left of the store's pages on your computer's iTunes, or via the Store > Sign Out menu option (if you are using a PC and the drop-down menus aren't showing at the top of iTunes then control-B should get them to show). You can then sign in with your own account (the Store > Sign Out menu option should change to a Sign In option) - does that work ?

  • Installed 10.5.7 and cannot print from Brother printers

    I installed the 10.5.7 software update the other day and now cannot print from my Brother MFC 5860CN or MFC-7220. I'm very frustrated because my business has come to a complete halt. I've gone to the Brother site and installed additional drivers, but still having no success.
    The 5860CN error message is that the printer is 'offline' and the 7220 error message is either 'raster file failed' or 'genericclass: waiting for device'. Printing does not work on either Safari or Firefox.

    Pat Lukes wrote:
    I installed the 10.5.7 software update the other day and now cannot print from my Brother MFC 5860CN or MFC-7220. I'm very frustrated because my business has come to a complete halt. I've gone to the Brother site and installed additional drivers, but still having no success.
    The 5860CN error message is that the printer is 'offline'
    1 turn the printer off.
    2 remove the power plug
    3 remove the Ethernet cable.
    4 clear the print setup on the Mac
    5 restart the Mac
    6 plug in the printer's power
    7 plug in the printer's Ethernet
    8 turn the printer on
    9 locate the printer using the Brother Control Center utility. Verify that it has a valid IP address. If possible, set it to a fixed IP address _outside of the DHCP pool assigned by your router_. (You do have a router, right?) Please note that a 169.254.x.y address is not a valid IP address.
    10 set up the printer from Print & Fax.
    and the 7220 error message is either 'raster file failed' or 'genericclass: waiting for device'. Printing does not work on either Safari or Firefox.

  • Help:I can't get correct display

    I write a program with java, and some chinese word string are used.
    when it runs on platform win2000, all is right.
    but, when I run it on redhat9, I can't read them strings why?
    what should I do to correct it?

    Hi,
    Open the directory <sdk-installation/jre/lib. There are several files that start font.properties. Open the most applicable one (font.properties.zh_CN.Redhat probably). What font families are used?
    (I have 1.4.2 too and it says zysong18030 but these things may vary from build to build.)
    Do you have those fonts installed? (xlsfonts | grep -i fontname)
    If not, have you installed the Chinese font pack? ttfonts-zh_CN, I believe... if you don't have the installation CDs you can fetch the RPM from http://rpmfind.net
    (I use fedora core 1 which is kind of redhat, and made a small test program and noticed the same problem: it can't show Chinese text. I found out that I don't have the zysong18030 font installed, so I downloaded and installed ttfonts-zh_CN but that didn't contain zysong18030 either but some different fonts. But I also have font.properties.zh_CN.Redhat2.1 in my jre/lib, and when I looked at it I saw it uses the fonts I just installed with ttfonts-zh_CN. So I moved font.properties.zh_CN.Redhat2.1 to font.properties.zh_CN.Redhat, tried the test program again, and now it could show the text.)
    There's more info on font.properties at http://java.sun.com/j2se/1.4.2/docs/guide/intl/fontprop.html

  • Entered incorrect password to email photos from iPhoto, How can I enter correct password? Using Version 10.10.3

    I entered an incorrect password when I was about to email photos from iPhoto. Message popped up saying Server does not recognize user name/password. Only option was to enter ok. How can I re enter correct password. Tried shutting computer down hoping it would prompt me to enter password again but the same message came up. I am using OS X Yosemite version 10.10.3

    iPhoto Menu -> Preferences -> Accounts ->
    Delete and recreate your email settings.
    Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

Maybe you are looking for