Prints in interupted lines

photosmart 5520 have clean heads & black still only prints in interupted lines. have also re alined & using genuie products

The document here may help resolve black not printing properly on your Photosmart 5520 printer. If the steps there do not resolve the issue it may help if you could scan and post the diagnostic page from solution six of that document.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Installed a new printer and one line on the top is skipped

Appreciate your inputs.
We have been using the 'Check Printing report' for quite a while; We recently installed a new printer and we see that the alignment has gone wrong.
The checks are printing from one line below as it is skipping one line. Where do we adjust the setting so that the printing starts from the place where we want?
Thanks in advance

Hi
Im no expert but I doubt its a template issue more likely to be the control escape sequence on the printer diriver set up. Check your printer manual and the current set up you have.
Regards
Tim

Printing of changed line item in scheduling agreement smart form.

Hi experts,
I am facing problem in printing of changed line item in schedule agreement.
can any body tell me how to find the line item has been changed through programming?what is the procedure to fetch the data for new line item.its
very urgent for me.
Please help me in this regard.
Priti Shrivastava

Hi
with the help of T180-TRTYP field you know if that doc has been changed or created.
If it is not equal to H it is changed. H means created.
pass the TCODE of Sched Agreement and check this field.
You can use the CDHDR and CDPOS table s to get the changed values of new item.
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Taking download into excel from ALV Grid - header is printing in two lines

Hi All,
I have a scenario where I am taking the download from ALV grid to an excel sheet. Now the header of the ALV (column names) is appearing in two lines in the downloaded excel sheet while items (records of the ALV table) are getting displayed in a single line.
This download is taken from the standard download to local file (spreadsheet) button provided by SAP for ALVs.
I am using function module "Reuse_alv_grid_display" for the purpose.
Can somebody provide an idea how I can avoid the header printing in two lines and keep the length as it is.
Thanks in Advance,
Chandan

Hi..
1. Pass header name in internal table appned first line.
2. after that pass u r data .
3. Use FM. WS_DOWNLOAD
Salil ......
Edited by: salil chavan on Nov 26, 2008 11:07 AM

How can I print the "number lines" with the code in Visual Studio?

How can I print the "number lines" with the code in Visual Studio?

Hi BillionaireMan,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, please tell us more information,we will try my best to help you.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Printing only 10 lines in the Report

Hi,
I have a unique requirement , need to customize the Existing cheque print report in that ,if there are 20 invoice lines related to cheque,i should only print first 10 lines in the output and in 11 th line display message as remaining lines are Not printed.and others lines should not be printed.
Can the requirement of not printing all the lines from 11th line be done using xml coding.
Best Regards,
mahi
Edited by: BIP Learner on Mar 18, 2010 10:29 PM

Hi Vetri,
Thanks for the reply,I tried the for each statement on the xml below and it's showing blank data.
<?xml version="1.0" encoding="UTF-8"?>

<SUPPLIERLIST>
     <G_VENDOR_NAME>
          <VENDOR_NAME>Nuts and Bolts Limited</VENDOR_NAME>
          <ADDRESS>1 El Camino Real, Redwood City, CA 94065</ADDRESS>
     </G_VENDOR_NAME>
     <G_VENDOR_NAME>
          <VENDOR_NAME>Big Bike Motorsports</VENDOR_NAME>
          <ADDRESS>10 Downing Street, London, SW1, UK</ADDRESS>
     </G_VENDOR_NAME>
     <G_VENDOR_NAME>
          <VENDOR_NAME>Second Cars</VENDOR_NAME>
          <ADDRESS>500 Parkway, Palo Alto, CA 94444</ADDRESS>
     </G_VENDOR_NAME>
     <G_VENDOR_NAME>
          <VENDOR_NAME>Phat Tunes</VENDOR_NAME>
          <ADDRESS>1 Beach Park Boulevard, Foster City, CA 94404</ADDRESS>
     </G_VENDOR_NAME>
     <G_VENDOR_NAME>
          <VENDOR_NAME>Big Bank PLC</VENDOR_NAME>
          <ADDRESS>3432 Pecos Avenue, Fremont, CA 94555</ADDRESS>
     </G_VENDOR_NAME>
     <G_VENDOR_NAME>
               <VENDOR_NAME>1Nuts and Bolts Limited</VENDOR_NAME>
               <ADDRESS>1 El Camino Real, Redwood City, CA 94065</ADDRESS>
          </G_VENDOR_NAME>
          <G_VENDOR_NAME>
               <VENDOR_NAME>2Big Bike Motorsports</VENDOR_NAME>
               <ADDRESS>10 Downing Street, London, SW1, UK</ADDRESS>
          </G_VENDOR_NAME>
          <G_VENDOR_NAME>
               <VENDOR_NAME>3Second Cars</VENDOR_NAME>
               <ADDRESS>500 Parkway, Palo Alto, CA 94444</ADDRESS>
          </G_VENDOR_NAME>
          <G_VENDOR_NAME>
               <VENDOR_NAME>4Phat Tunes</VENDOR_NAME>
               <ADDRESS>1 Beach Park Boulevard, Foster City, CA 94404</ADDRESS>
          </G_VENDOR_NAME>
          <G_VENDOR_NAME>
               <VENDOR_NAME>5Big Bank PLC</VENDOR_NAME>
               <ADDRESS>3432 Pecos Avenue, Fremont, CA 94555</ADDRESS>
     </G_VENDOR_NAME>
     <G_VENDOR_NAME>
               <VENDOR_NAME>6Nuts and Bolts Limited</VENDOR_NAME>
               <ADDRESS>1 El Camino Real, Redwood City, CA 94065</ADDRESS>
          </G_VENDOR_NAME>
          <G_VENDOR_NAME>
               <VENDOR_NAME>7Big Bike Motorsports</VENDOR_NAME>
               <ADDRESS>10 Downing Street, London, SW1, UK</ADDRESS>
          </G_VENDOR_NAME>
          <G_VENDOR_NAME>
               <VENDOR_NAME>8Second Cars</VENDOR_NAME>
               <ADDRESS>500 Parkway, Palo Alto, CA 94444</ADDRESS>
          </G_VENDOR_NAME>
          <G_VENDOR_NAME>
               <VENDOR_NAME>9Phat Tunes</VENDOR_NAME>
               <ADDRESS>1 Beach Park Boulevard, Foster City, CA 94404</ADDRESS>
          </G_VENDOR_NAME>
          <G_VENDOR_NAME>
               <VENDOR_NAME>10Big Bank PLC</VENDOR_NAME>
               <ADDRESS>3432 Pecos Avenue, Fremont, CA 94555</ADDRESS>
     </G_VENDOR_NAME>
</SUPPLIERLIST>
Best Regards,
Mahi

How do I make my "off-line" printer go on-line?

I am a new MacBook user. I have windows network. I installed printer CUPS driver for my brother 7820N printer. can print when connected directly with USB. MB recognizes printer when not connected directly...must be going through the wireless network. try to print and little printer icon on DOCK starts jumping...says printer is Off-Line. can see the files in the queue.
Any ideas on how to make the printer "on-line"? Thank you.

My Brother 2170-W printer just began giving me the same "off-line" message I called Brother support and they were very responsive and said it was a problem with the new OS 10.5.5 update and they would have a patch shortly (in a week maybe?).
Linda

Will only print the first line or so to a HP Officejet Pro K550

The Mac has been connected for a number of years to the printer, but suddenly it started to only print the top line or so of a text. The problem occurred later in the day having worked fine in the morning.
The self test for the printer works fine, producing a full test sheet, including all colours (and there is no indication that ink is running low).
It looks as if it is almost certainly a problem with the Mac itself, especially since the printer works with other, non-Mac - laptops.
Mac OS X
3.06 GHz Intel Core 13
Memory: 4GB 1333MHz DDR3

Jane,
Run Software Update and see if there are any new drivers available. If none appear then follow Apple's steps in Mac OS X: How to reset the printing system

Printing problem for line items in a smartform

Hi
I am developing a smartform for inbound delivery, i have to print each line item in each page and each line item should be printed according to count of pallets.
lets say if my first line item has 5 pallets, it should print 5 time on smartform. and second line item should print on second page , and this logic should continue for all line items.
can some one help me out ?

item No Material No Descripition Putaway Bin SUT Vendor Batch LE QTY COA Base UOM
this how my line item should like, i am able to print only single line item for each item no.
if i have 5 pallets for single line item, i want the same line item to be printed 5 times and this is what i am looking at

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem.

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?

What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down?

D110 only prints the first line.

If I send an item to the printer, it only prints the title. I have tried to copy to notepad and pasted to an email. Then sent it to the printer thru an email. It only prints the first line. How do I get it to print the whole item?

You can use one of our diagnostic tool and can this can help you resolve the issue automatically and you can use it in future as well.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=sg&dlc=en&sw_lang=&product=5169...
Check if the issue gets resolved.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

How can I get my Epson NX625 printer back on line?

How can I get my Epson NX625 printer back on line?

The solution to your issue is in this thread:https://discussions.apple.com/thread/5233149
Specifically this post:
"astonishingly as it may seem, epson support sent me this 6 hours after i contacted them-
Subject
when attempting to print the epson print program shows "stopped - 'filter' faile
Discussion Thread
Response (Rodolfo M)
08/16/2013 03:21 PM
Dear Robert,
Thank you for contacting Epson.
I am sorry to hear that you are experiencing difficulties with your Epson Artisan 710 because of rastertoescpII error. To resolve this issue, please try the following steps below:
Power off the printer.
From the , select System Preferences.
Choose Sharing.
Check if "Computer Name" field is empty or not.
If the "Computer Name" is empty enter a name for the computer.
Restart the Computer.
Test if you are able to print.
We take your satisfaction seriously and hope that we have helped resolve your issue. If you receive a survey from us, we would greatly appreciate if you could take a few minutes to provide us with feedback about your support experience. Your ratings and comments are extremely important to us.
If this did not resolve your issue, please reply to this email for further assistance. If you have a different support issue, submit a request via our U.S. Support Site and we will respond in a timely manner.
Thank you again for contacting Epson.
Jun M."

Want to print a dark line as seperator in table row for each loop

Hi,
I have a collection of data
I have to print it in a table but condition is it should print a dark line as separator in table for each loop & also have to print a dark line in the end of table.
means Some thing like below
Table Headings
Data1
Data1.1
Data1.2
Data2
Data2.1
Data2.2
Please help ..
Bunty
Message was edited by:
bunty_india

Well what does your looping code look like?
Are you using scriptlets? or JSTL forEach?
Do you have nested loops?
What is your data structure?
Your question about knowing which is the last line in the table requires knowing all of these things. Help us to help you.

When I try to print it get a message that says my printer is off line. How do I get it back on line

how do I get my printer back on line?

Hi ljzimprich!
To have a better understanding of your issue, please let everyone know which model printer you own and what operating system you are connecting it to. That way, community will be able to assist you with suggestions appropriate for your product.
Thanks!

Prints in interupted lines

Similar Messages

Maybe you are looking for