Prints too dark after moving to vista 64 bit home premium

Hi,
I have a photosmart d7360 printer that used to produce brilliant prints when i had windows XP. I have since purchased a new PC with vista 64 bit home premium and my prints are now very dark. Can anyone please suggest a solution??
thanks.

did you find a solution for this problem? I am having the exact same problem.

Similar Messages

Once again: prints too dark after upgrading CS3 to CS5

Hi, I know this has been discussed before, but I haven't found a solution to my issue in the existing threads. I am most likely missing something obvious, and perhpas someone here can point it out to me.
I recently upgraded from CS3 to CS5. In both editions of photoshop I followed Eric Chan's recipe for setting up the print workflow: http://people.csail.mit.edu/ericchan/dp/Epson3800/printworkflow.html. In CS3 everything works as expected, i.e., the print matches the soft proof. Printing the same image from the same computer/monitor in CS5 produces a print that is much darker than the softproof or the CS3 print.
In case this is relevant, my psd files are all in Adobe RGB 1998, I use the Epson supplied print diver (v5.51) for the Stylus 3800. I use the icc profile for Epson's Exhibition Fiber paper, which is what I am printing on. The conversion method is Relative Calorimetric with Blackpoint Compensation checked. Photoshop runs on a 32bit Windows XP SP3 machine.
Any suggestions? Are there any settings that are not mentioned in Eric Chan's write-up that I should look at to find the source of the difference? Is there anything else that could account for the different prints?
Thank you!
Martin

Thank you for the help! Here are the screen shots. I printed the wacked image from CS3 and CS5. In CS3 everything looks right, i.e. the soft proof matches the print. In CS5 the soft proof looks the same as in CS3, but the print is dark. A photo of the printout is attached at the end.
CS3:
CS5:
Result:

Epson r1900 Prints too dark after upgrading to cs5 from cs3

Ok this one has got me stumped. While still in photoshop CS3 my epson r1900 was printing photo's just fine. After upgrading cs3 to Photoshop cs5 it now prints everything too blue. Nothing else has changed. My monitor is still calibrated, my printer paper profiles are still the same, the only change was upgrading to cs5. To me it looks all the world like ICM is being applied twice (in photoshop and the printer) but in photoshop I have selected "photoshop manages colors" just like I did in cs3, and in the print dialog box for the printer, I have selected no ICM again just like I did in CS3. But now the prints come out with a, to my eye, dark blue tint. Very very frusterating. I have deleted the color prefs file and let that recreate, but that did not help either. I am out of tricks. Any suggestions?
Thanks
Patrick

There were a lot of reports of "double profiling" with Epson printers when Photoshop CS5 was first released. I believe many people were seeing magenta-looking prints at that time.
Unfortunately, I don't think there was ever a resolution or even a good workaround... I recall at least one person bought a new printer to be able to continue to work.
Of course, double check to see whether Epson has released any updated printer drivers.
As I don't have an Epson myself, I can only suggest that you'll want to experiment with your settings to see if you can find a way to disable color management in the printer driver, so that only Photoshop does it - or disable color-management in Photoshop so that only the printer driver will do it.
-Noel

Exported Jpeg's when sent to photo lab print too dark

I have had consistent results with exported jpeg images that look fine on my monitor (as raw files)and show in the histogram in lightroom 2.5 as the highlights just starting to clip as printing too dark when sent to a photo lab in SRGB. Is this a fault of my monitor? I have calibrated the monitor, a Dell S2409W, using charts on the website at http://www.normankoren.com/makingfineprints1A.html but this still happens. Will darkening the Monitor help or will the images still clip at the same point? I have been able to send a second image with the exposure and or brightness boosted a bit and they print brighter, but this is a pain. What is the best way to correct this so that I can see the same image as I get back from the lab?

hello henrykipson,
you said that you want starting an professional laboratory business,i can talking about this because i had a laboratory until some years ago .i hope that you made some artistic study,so it's more easy for you to learn this topic.you must study,an pass an examination for take an artigianal licence that allow you to open this activity ,the licence given you the opportunity to work either for sale photografic material either to shoot and developing,one time that you had pass this examination you must gone to the police autority and inform these of your business (is under police control.because you work with chemical material,and also because you had a reservate people information,and they must given you their assent.)after all you can start to buy a good developer and print machine beyond to have a dark room.for manual print.you must decided if do you want work in black and white or color.You can do both but is better to specialize by one of them ,like you want.
Remember from the digital events many people print his image at home,you must deciding maybe is better to work with a professional photographer,that can given you more work.itsn't easy.you must have a good preparation because ,they are more exigent.The good results depend also from the quality of your works.a good machine,good chemical product,good upkeep,of your laboratory.(in italy this is the procedure,i think also in other country,because is a ticklish question licence.)I hope that this my little explanation are useful to you.Good luck .
cheers alessandra minotti

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Ok, look at your files in Photoshop. What is the profile assigned to them? You can find this out by going to the Status bar at the bottom, clicking on the right-pointing triangle and choosing document Profile from the list.
Then in Windows, go to your Control Panel > Color Management and add sRGB (if it isn't there) and select it as your default profile.
I hope that will work.

Epson prints too dark from LR on color managed MacBook Pro?

Hi all,
I have a newish MacBook Pro, calibrated with Spyder2, and printing to an Epson 2200. The prints are too dark, and don't really come close to matching the screen in LR. I've brought the images into PS2 for soft proofing, but the prints are still far too dark. It's not just out of LR, but DPP as well. I found this topic:
http://www.adobeforums.com/cgi-bin/webx/.3bc44027/28
Tthat seems to describe my problem, but it seems to be Adobe-specific. Doug doesn't say if he's tried printing from other apps. I use Epson's custom profiles, which actually seem to be worse than the standard profiles that come with the driver.
A new twist seems to be that profiled jpg images with sRGB profiles exported from LR also print too dark when I had them sent out for printing, which leads me to think that my screen is not profiled correctly, or there's some weird flaw in the Mac's color management engine that skews everything.
My first question: When I profile my screen using Spyder2, I have the brightness set at maximum. Should I bring it down, and if so, how far? The Spyder2 help says use "Factory Defaults", but the MBP ships with brightness set on auto-adjust based on ambient light levels.
My second question: Are there others who have this issue? Have any of you resolved them successfully, and if so, how?
Thanks!
Timmy

Time for a reality/sanity check for those who complain that "the "prints are too dark from my Epson printer"!
If you will just reduce your monitor's white-point luminance to the range of 80-90 cd/m2 when you edit your images, it's almost certain that the problem will be solved (assuming you're not making some other error in color management setup). Many people conclude that their problem must be a generic failure or defect of Epson printers (i.e., compared to HP, etc)-- or that the Epson paper profiles are defective. Well, perhaps there's some element of truth to that conclusion--to the extent that Epson printers have evidently been designed with typical professional editing environments in mind (i.e., the low brightness levels to which "serious" printers adjust their monitors and ambient lighting). Why would they do that: Well, who wants to spend many hours each day looking at the glare of a 200 cd/m2 monitor screen (and the reflections from a brighly lighted room)?
So, for getting "monitor-matching" prints from printers such as the SP 2200, you simply need to work (edit) with your images in a more-or-less "dimly lit" room using a monitor that is properly adjusted for such a low-light environment--(i.e., the screen luminance not higher than 90-100 cd/m2). Of course even with such a reduced screen luminance, the light used for print-viewing must be sufficiently bright(**)
It's possible that your monitor cannot be adjusted to the necessary (low) luminance level--or that you haven't any means to measure the luminance level. Those are correctable hardware issues, although may require $$.
(**)please note that a fairly bright viewing light is needed for prints (made as suggested above) to appear to be a reasonably close "match" to the monitor image.
Phil

Recently my PDF files have printed too dark. Has something changed in the software?

Why do my PDF files print too dark?

2many2cho0se wrote:
Yes...I know iMessage is supposed to be where there is wifi...
Actually, all iMessage requires is a data connection, & that data connection can be either WiFi or 3G.

Some images printing too dark

I have two cameras that I use with iPhoto 6.0.4. A Canon G4, and a Pentax ist D. In iPhoto both cameras have nice looking images. The images from the Canon make beautiful prints, but the Pentax images print too dark. How can I fix this? Can I set different printing preferences for each camera?

whenever I calibrate my iMac with the Spyder2 hardware, I have to calibrate it twice because I always forget to turn off the Screen Saver and the Energy Saver 'Put Screen to Sleep' option.
another important thing about calibration. where is your 'book located during the calibration? what lights or on or off? is there any direct sunlight shining on the 'book?
personally, I prefer to calibrate at night with all lights turned off. if I calibrate at day, I shut the tinted doors and turn all (fluorescent) lights off. I realise that you are supposed to calibrate under your normal lighting conditions but I prefer this method

Illustrator PDFs print correctly from PC, but print too dark from Macs

Photoshop and Illustrator PDF files (CS5 & 6) print correctly from my work PC, but not either of my Macs. See below:
At work, I have a Dell PC and an iMac, at home I have a MacBook Pro.
At work there is a big office color Ricoh printer for the Dell and iMac, at home I have a Epson 3-in-one laserjet for the MacBook Pro.
Both the work and home Macs will print Illustrator/Photoshop PDFs very dark/undersaturated/off color on their relative printers, but the work PC prints them correctly.
At work, If you hold up a print of a PDF file printed from the Dell PC, and one printed from the iMac, they are completely different looking - the Dell print matches the Dell and iMac screens, but the iMac print is very dark and dull.
At work, when I open a Illustrator or Photoshop PDF on the work PC and send it to the Richo printer, it comes out perfectly matching the screen, but, if I open it on the iMac and send it to the Richo printer, it prints too dark/off color.
These are the *exact* same PDF files I am opening on both the PC and the iMac - our files are saved on a server so I'm accessing the same documents on both machines.
Also, I create the files on the iMac and save them to the server on the iMac, but if I open them on the iMac it prints too dark, and if I open them on the PC, it prints correctly.
At home on the MacBook Pro, the prints are also much darker than the screen (despite color calibration with a ColorMunki as well as following all Epson's color calibration steps) and I see a similar color problem as printing to the work printer from the work iMac.
Someone please tell me this is just a printer profile thing and I can go in somewhere on my Macs and switch something so they print the same as the PC does!
Thank you in advance for explaining why my Macs are making me pull out my hair!

the iMac it prints too dark
your print space is off on the Mac
or you are applying the wrong source profile or both
on the MacBook Pro, the prints are also much darker than the screen (despite color calibration
EDIT: sorry i misread that as your monitor was also dark, if the mac displays the problem doc proper, you are targeting a bad print space, that's where i would look...
you app is apply the wrong source profile (or your monitor profile is off)
basing the source>print space conversion on the wrong source profile could account for your printing woes
be sure you are embedding an ICC profile in your doc, are opening it in a color-managed app, and it should display properly
be sure your workflow uses the embedded profile and your printer is setup to convert to the proper printer profile
color management theory
epson workflow

Why does PS CC print too dark? I found printing from PS CS5 was more accurate.

Why does PS CC print too dark? I did not have this issue when printing with PS CS5.

Why does PS CC print too dark? I did not have this issue when printing with PS CS5.

Acrobat XI is prints too dark!

Acrobat XI is printing too dark to our machines. Acrobat 7 prints just fine, same file, same machine.
Anyone else having this issue? It's VERY frustrating and short of adjusting EVERY photo in EVERY
file we cannot figure out what the issue is. We are using Windows XP & Windows 7, same result in both.

Have you compared the colour management settings in Acrobat's print dialogs (Advanced)?

C309g-m printer, prints too dark

My printer always prints too dark.
The prints never come out like they look on the screen. I can manually change the lightness of the photo to compensate, but it would be nice if there were settings I could change in the printer instead.
Any advice would be nice..thanks!

What paper quality and paper type settings are you using? If you are printing on plain paper but have selected a photo paper then the result will be oversaturated. Also if your application gives the choice of RGB or CMYK then choose RGB. (The printer uses CMYK inks, but the driver is expecting RGB data.)
What operating system? Your driver may have settings for Advanced Color Control. In the Windows 7 dr.iver this would be found in Printing Preferences, Color, More Printing Options. You can change the brightness and saturation as shown in the sliders here:
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Boot camp (vista 64-bit home premium) not seeing both my CPUs

so i just received my mac pro =) base config with 8800GT.
i just installed windows vista 64-bit home premium via boot camp. everything is going fine, it's just when i open task manager, it only sees four cores instead of all eight. is it because i have home premium, not business or ultimate? or is something wrong? thanks!

Programs that support 64-bit Vista (few are being updated or written for Pro) show better performance - cleaning up code base and adding features, that you won't find in 32-bit.
There are Vista and MS newsgroups that deal just with games.
http://windowshelp.microsoft.com/communities/newsgroups/en-us/default.mspx
http://www.vistax64.com/

Trouble installing Vista 64 bit home premium

I am trying to use boot camp to install Vista 64 bit home premium. The disk is a full install. Boot camp works fine, but when I insert the windows disk and attempt to boot off of it, I am confronted with a screen that gives me two options with no names, labeled only 1 and 2, and instructions to select a CD boot type. However, I cannot select any of them because my keyboard does not work! I have tried several times, with several partition sizes, and even brought out an old USB Microsoft keyboard, which is still not recognized. I have done this with only non-apple peripherals, as well - microsoft mouse, acer monitor, and all USB devices plugged directly into the back of the computer. I have not seen this problem listed anywhere else, so can anyone here help me? I have looked everywhere. Thank you.

It is an issue iwth our older EFI 1.x (or EFI32) and Vista SP1 64-bit that needs UEFI 2.x (EFI64).
Sort of the same issue as the Nvidia 8800GT had to come out in two flavors.
I have Windows already installed, older pre-SP1, and from there I can install SP1 DVD.
At this point, I much prefer Windows 7 over Vista x64 SP1 or SP2(beta). Just runs better. Last day tomorrow maybe to download.

After upgrading to v 3.6.3 I get a "node not found" error whenever I try to exeute a link found by Google. I am running wind 7 64-bit Home Premium. Yahoo works fine. Can anyone tell me what is happening?

I have recently installed 3.6.3 on a new machine running win 7 64-bit Home Premium. When I do a Google search and click on a link resulting from the search I get a "JavaScript Application Debug Error" followed buy a lengthy description (which I cannot copy to the clipboard). I cannot close the dialog box so the only solution is to close down Firefox and restart it. Any help gratefully appreciated!
== This happened ==
Every time Firefox opened

I have recently installed 3.6.3 on a new machine running win 7 64-bit Home Premium. When I do a Google search and click on a link resulting from the search I get a "JavaScript Application Debug Error" followed buy a lengthy description (which I cannot copy to the clipboard). I cannot close the dialog box so the only solution is to close down Firefox and restart it. Any help gratefully appreciated!
== This happened ==
Every time Firefox opened

Prints too dark after moving to vista 64 bit home premium

Similar Messages

Maybe you are looking for