Prints too dark on my Epson R1800

hello all,
i'm having trouble with printing from my Mac Book Pro with OSX 10.4.11. i'm using an Epson Stylus Photo R1800, i got the latest drivers from Epson. i'm still brand new to Mac having just made the switch a few moths ago so i have no idea what i'm doing just yet.
i'm trying to print a photo from Photoshop or Aperture and they're coming out way too dark and lacking any detail. the printer is fine, head is kept clean. before making the switch i did many prints all perfect. i have the color profile set to Adobe RGB 1998.
any help would be greatly apprecaited and i thank you in advance for your time.
Eric

Thank you Andrew, I'm going to give that a try. Sorry, I didn't get a notification that you replied or I'd have thanked you sooner. I'll keep my fingers crossed!
I actually downgraded to 10.4.11 and that's what i've been using.
Thanks again,
Eric

Similar Messages

Epson prints too dark from LR on color managed MacBook Pro?

Hi all,
I have a newish MacBook Pro, calibrated with Spyder2, and printing to an Epson 2200. The prints are too dark, and don't really come close to matching the screen in LR. I've brought the images into PS2 for soft proofing, but the prints are still far too dark. It's not just out of LR, but DPP as well. I found this topic:
http://www.adobeforums.com/cgi-bin/webx/.3bc44027/28
Tthat seems to describe my problem, but it seems to be Adobe-specific. Doug doesn't say if he's tried printing from other apps. I use Epson's custom profiles, which actually seem to be worse than the standard profiles that come with the driver.
A new twist seems to be that profiled jpg images with sRGB profiles exported from LR also print too dark when I had them sent out for printing, which leads me to think that my screen is not profiled correctly, or there's some weird flaw in the Mac's color management engine that skews everything.
My first question: When I profile my screen using Spyder2, I have the brightness set at maximum. Should I bring it down, and if so, how far? The Spyder2 help says use "Factory Defaults", but the MBP ships with brightness set on auto-adjust based on ambient light levels.
My second question: Are there others who have this issue? Have any of you resolved them successfully, and if so, how?
Thanks!
Timmy

Time for a reality/sanity check for those who complain that "the "prints are too dark from my Epson printer"!
If you will just reduce your monitor's white-point luminance to the range of 80-90 cd/m2 when you edit your images, it's almost certain that the problem will be solved (assuming you're not making some other error in color management setup). Many people conclude that their problem must be a generic failure or defect of Epson printers (i.e., compared to HP, etc)-- or that the Epson paper profiles are defective. Well, perhaps there's some element of truth to that conclusion--to the extent that Epson printers have evidently been designed with typical professional editing environments in mind (i.e., the low brightness levels to which "serious" printers adjust their monitors and ambient lighting). Why would they do that: Well, who wants to spend many hours each day looking at the glare of a 200 cd/m2 monitor screen (and the reflections from a brighly lighted room)?
So, for getting "monitor-matching" prints from printers such as the SP 2200, you simply need to work (edit) with your images in a more-or-less "dimly lit" room using a monitor that is properly adjusted for such a low-light environment--(i.e., the screen luminance not higher than 90-100 cd/m2). Of course even with such a reduced screen luminance, the light used for print-viewing must be sufficiently bright(**)
It's possible that your monitor cannot be adjusted to the necessary (low) luminance level--or that you haven't any means to measure the luminance level. Those are correctable hardware issues, although may require $$.
(**)please note that a fairly bright viewing light is needed for prints (made as suggested above) to appear to be a reasonably close "match" to the monitor image.
Phil

Illustrator PDFs print correctly from PC, but print too dark from Macs

Photoshop and Illustrator PDF files (CS5 & 6) print correctly from my work PC, but not either of my Macs. See below:
At work, I have a Dell PC and an iMac, at home I have a MacBook Pro.
At work there is a big office color Ricoh printer for the Dell and iMac, at home I have a Epson 3-in-one laserjet for the MacBook Pro.
Both the work and home Macs will print Illustrator/Photoshop PDFs very dark/undersaturated/off color on their relative printers, but the work PC prints them correctly.
At work, If you hold up a print of a PDF file printed from the Dell PC, and one printed from the iMac, they are completely different looking - the Dell print matches the Dell and iMac screens, but the iMac print is very dark and dull.
At work, when I open a Illustrator or Photoshop PDF on the work PC and send it to the Richo printer, it comes out perfectly matching the screen, but, if I open it on the iMac and send it to the Richo printer, it prints too dark/off color.
These are the *exact* same PDF files I am opening on both the PC and the iMac - our files are saved on a server so I'm accessing the same documents on both machines.
Also, I create the files on the iMac and save them to the server on the iMac, but if I open them on the iMac it prints too dark, and if I open them on the PC, it prints correctly.
At home on the MacBook Pro, the prints are also much darker than the screen (despite color calibration with a ColorMunki as well as following all Epson's color calibration steps) and I see a similar color problem as printing to the work printer from the work iMac.
Someone please tell me this is just a printer profile thing and I can go in somewhere on my Macs and switch something so they print the same as the PC does!
Thank you in advance for explaining why my Macs are making me pull out my hair!

the iMac it prints too dark
your print space is off on the Mac
or you are applying the wrong source profile or both
on the MacBook Pro, the prints are also much darker than the screen (despite color calibration
EDIT: sorry i misread that as your monitor was also dark, if the mac displays the problem doc proper, you are targeting a bad print space, that's where i would look...
you app is apply the wrong source profile (or your monitor profile is off)
basing the source>print space conversion on the wrong source profile could account for your printing woes
be sure you are embedding an ICC profile in your doc, are opening it in a color-managed app, and it should display properly
be sure your workflow uses the embedded profile and your printer is setup to convert to the proper printer profile
color management theory
epson workflow

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Ok, look at your files in Photoshop. What is the profile assigned to them? You can find this out by going to the Status bar at the bottom, clicking on the right-pointing triangle and choosing document Profile from the list.
Then in Windows, go to your Control Panel > Color Management and add sRGB (if it isn't there) and select it as your default profile.
I hope that will work.

Recently my PDF files have printed too dark. Has something changed in the software?

Why do my PDF files print too dark?

2many2cho0se wrote:
Yes...I know iMessage is supposed to be where there is wifi...
Actually, all iMessage requires is a data connection, & that data connection can be either WiFi or 3G.

Some images printing too dark

I have two cameras that I use with iPhoto 6.0.4. A Canon G4, and a Pentax ist D. In iPhoto both cameras have nice looking images. The images from the Canon make beautiful prints, but the Pentax images print too dark. How can I fix this? Can I set different printing preferences for each camera?

whenever I calibrate my iMac with the Spyder2 hardware, I have to calibrate it twice because I always forget to turn off the Screen Saver and the Energy Saver 'Put Screen to Sleep' option.
another important thing about calibration. where is your 'book located during the calibration? what lights or on or off? is there any direct sunlight shining on the 'book?
personally, I prefer to calibrate at night with all lights turned off. if I calibrate at day, I shut the tinted doors and turn all (fluorescent) lights off. I realise that you are supposed to calibrate under your normal lighting conditions but I prefer this method

Exported Jpeg's when sent to photo lab print too dark

I have had consistent results with exported jpeg images that look fine on my monitor (as raw files)and show in the histogram in lightroom 2.5 as the highlights just starting to clip as printing too dark when sent to a photo lab in SRGB. Is this a fault of my monitor? I have calibrated the monitor, a Dell S2409W, using charts on the website at http://www.normankoren.com/makingfineprints1A.html but this still happens. Will darkening the Monitor help or will the images still clip at the same point? I have been able to send a second image with the exposure and or brightness boosted a bit and they print brighter, but this is a pain. What is the best way to correct this so that I can see the same image as I get back from the lab?

hello henrykipson,
you said that you want starting an professional laboratory business,i can talking about this because i had a laboratory until some years ago .i hope that you made some artistic study,so it's more easy for you to learn this topic.you must study,an pass an examination for take an artigianal licence that allow you to open this activity ,the licence given you the opportunity to work either for sale photografic material either to shoot and developing,one time that you had pass this examination you must gone to the police autority and inform these of your business (is under police control.because you work with chemical material,and also because you had a reservate people information,and they must given you their assent.)after all you can start to buy a good developer and print machine beyond to have a dark room.for manual print.you must decided if do you want work in black and white or color.You can do both but is better to specialize by one of them ,like you want.
Remember from the digital events many people print his image at home,you must deciding maybe is better to work with a professional photographer,that can given you more work.itsn't easy.you must have a good preparation because ,they are more exigent.The good results depend also from the quality of your works.a good machine,good chemical product,good upkeep,of your laboratory.(in italy this is the procedure,i think also in other country,because is a ticklish question licence.)I hope that this my little explanation are useful to you.Good luck .
cheers alessandra minotti

Why does PS CC print too dark? I found printing from PS CS5 was more accurate.

Why does PS CC print too dark? I did not have this issue when printing with PS CS5.

Why does PS CC print too dark? I did not have this issue when printing with PS CS5.

Acrobat XI is prints too dark!

Acrobat XI is printing too dark to our machines. Acrobat 7 prints just fine, same file, same machine.
Anyone else having this issue? It's VERY frustrating and short of adjusting EVERY photo in EVERY
file we cannot figure out what the issue is. We are using Windows XP & Windows 7, same result in both.

Have you compared the colour management settings in Acrobat's print dialogs (Advanced)?

C309g-m printer, prints too dark

My printer always prints too dark.
The prints never come out like they look on the screen. I can manually change the lightness of the photo to compensate, but it would be nice if there were settings I could change in the printer instead.
Any advice would be nice..thanks!

What paper quality and paper type settings are you using? If you are printing on plain paper but have selected a photo paper then the result will be oversaturated. Also if your application gives the choice of RGB or CMYK then choose RGB. (The printer uses CMYK inks, but the driver is expecting RGB data.)
What operating system? Your driver may have settings for Advanced Color Control. In the Windows 7 dr.iver this would be found in Printing Preferences, Color, More Printing Options. You can change the brightness and saturation as shown in the sliders here:
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Epson r 3000 print too dark

Hi there,
I am waisting papr and ink and I am getting totally sick of this.... and clueless!
Situation:
I am a Mac newbie after hundred frustrating Win years and have a MacBook Pro late 2013.
It comes with Mavericks and all updats are installed.
I have two printers: An office printer (Canon) and a photo printer - the Epson Stylus Photo R 3000
Bot work, as far as shier printing is concerned. That was easy.
Surprisingly the photos I get out of my Canon printer are not bad at all, as much as the printer can.
But the Epson is producing crap.
Trying to describe my workflow:
Open Image in RAW converter (Canon DPP), convert to Tiff (16bit)
Open Tiff in Gimp 2.8.10
Make adjustments such as cropping etc if needed, scale to paper size, setup the layout (paper format, where to print on the papr etc) - this all works.
Go into Gimp Print dialog.
Set the color management to "ColorSync" - I should mention that I did setup Gimp to use the profile of the paper manufacurer (in my case Hahnmuhle).
Print preview - excellent
Print - not a bit, but way too dark (I am guessing, but it is easily 30 - 50% too dark, or in other word at least - 1,5 to 2 EV, if not more.
I am totally frustrated and it seems that there is no help in any forum.....

Have you calibrated your monitor?
99% of the time that prints are too dark, it's because your monitor is too bright. You need to properly calibrate your monitor and adjust your photos so they look correct on the profiled monitor.
Here's a decent article on the subject:
http://www.luminous-landscape.com/tutorials/why_are_my_prints_too_dark.shtml

CS5 and Epson 3800. Prints Too Dark.

I've seen old posts about this, but nothing recent with this configuration of software and OS:
After years of printing successfully with my Epson 3800 from a PC, I recently switched to a Mac (Mac OS X 10.6). I am using Photoshop CS 5.
Despite many iterations of monitor calibration trying different settings, my prints are consistently about 2 stops too dark. I'm very vexed.
What is the latest information about this and how do I resolve this?
Thank you.

Hello!
The expert on 3800 is Eric Chan, one of the Camera Raw Senior Engineers : (scroll down after the Photo) http://people.csail.mit.edu/ericchan/
Message was edited by: Pierre Courtejoie -Typo

Prints too dark on Mac )S 10.6 with Epson 3800

All prints are too dark with Photoshop 6 using Epson 3800 on IMac OS 10.6 ; Help?

what workflow
are you using 16-bit options in the print menus (don't)
this has been covered here and on the web many times...
http://www.gballard.net/photoshop/epson/cs6/

Epson Stylus Pro 3800 - Prints too dark.

I had a Hewlett - Packard pigment ink printer and until it bit the dust, it printed very accurate, beautiful and to the display prints. I have a cheap Canon printer that puts out prints that can match the display too. I just purchased a new Epson Stylus 3800 printer and my prints are much too dark, too much contrast and ever so slightly posterized.
I am using Photoshop CS2. I have checked and I believe the drivers on my printer are current. I have tried letting the printer determine colors as well as letting Photoshop determine colors and turning off the printer controls in the print setting dialogue. The prints are OK - ish, but just not what's on screen and not what I want them to be. My screen is calibrated well enough. It is not paramount that my prints be totally and completely like the display but close.
Any help would be greatly appreciated.

Thank you one and all for all of this valuable advice. I have a professional coming in to tutor me. I know I can love this printer and want it to work for me as it works for some of you.
Ralph: The 3800 IS set as my default printer. I think I have the most recent drivers but am not positive because I can't find the driver folder to check the version. I know . . . . please bear with me, I try very hard. I have crashed three computers (crashed to the point of needing to be reformatted) and have learned the hard way, be careful when you download.
I used the in house (display calibration device) to calibrate my monitor. I feel it will do well enough for what I want to accomplish. The white point is set at 6000 and I set the tgarget gamma at 2.2 because I found the Mac Standard 1.8 made the display too bright.
My step by step printing settings are pretty basic: I use the embedded profile on one it is sRGBIEC61966-2.1 and on the other it is Duotone. Print With Preview, Let Photoshop Determine Colors, Black Point Compensation checked, and Rendering Intent set to Relative Colormetric. In the Printer Profile: I use the profile I downloaded from the paper's site OR an Epson profile. In the printer driver dialogue I make sure the 3800 is the chosen. Printer Color Management: I check the radio button for Off (No Color Adjustment) In the Print Settings dialogue (I have tried many with the same results.) The closest I came to what I wanted is when I used the front manuel feeder setting, with Velvet Fine Art Paper and checked Advanced Setting, Superfine - 2880 dpi and unchecked High Speed.
For the Let Printer Determine Colors I used Relative Colormetric. In the Printer Color Management I checked Color Controls. In Print Settings I used the same as above, Velvet Fine, Advanced and 2880dpi with High Speed off. The results were similar to the Photoshop settings but both were still too dark with very faint posterization in the gradients.
I have tried many combinations and I always go back to be sure, if I am letting Photoshop do the colors, to check and see if Off (No Color Adjustment) is still checked.
Jeff: Again to all and to you Jeff, thank you for your input. I AM trying but it's difficult. Around here there aren't many with the kind of expertise you have and so I have tried to learn this on my own. All I want to do is print my things. Just get the printer to do my things . . . . one good print at a time.
Sorry this is so long. I am going to get booted now. My server is going off-line to do upgrades. I am receiving my internet through low frequency microwaves and the little start up wants to make it better.
Thank you all for this helpful advice. I will now try to digest it.
Mary Ellen
If anyone knows were I can find the driver folder (exactly) I will look for it. When I open the Epson Utility it says Epson Printer Utility2 3.57 . . . . when I go to the Epson download site it says the version of the driver offered is 3.57 and so I think that I've got the right version.

PS 6 & epson 3800 prints too dark

All prints are TOO Dark with PS 6 on Epson 3800 (using 27" IMac OS10.6) no matter what I have tried; HELP

I can print ok from Microsoft Word
Screen has been calibrated with Spyder
How do I fix this?
Thanks
Sidney S. Horowitz
Sent from my iPhone

Prints too dark on my Epson R1800

Similar Messages

Maybe you are looking for