Prints too small and doesn't do margins correctly

When printing any document, either form Microsoft Word or the internet, the font sizes come out too small and the margins do not match the settings. For example, I have my margins set to 1inch all the way around and yet the printer prints the paper margins at **Top 1inch, left and right @ 1.3 inches, and the bottom at 2 inches. This is very annoying because it condenses everything and makes the font smaller. I have already went into all of the settings both in Word and the Printer. Everything is set right, I am using letter paper 8.5 x 11, it is set up to match that paper, and I've double checked everything. And the paper is loaded in correctly. I seriously don't know what to do. I've even tried selecting "fit to paper" under the printer options and nothing has changed. I am really tired of this printer.
Please help!

Scatteredskies
Welcome to the HP Community Forum.
Every printer I have ever had seems to revel in messing with us about margins - I had the 7520 printer for a year; in my personal opinion this printer is not better or worse in this regard than others.
I am not being sarcastic; far from it. I am fully sympathetic.
There is always something going on -- IF it is the printer then it might be one of the following:
Printers have margin restrictions that can get in the way of the settings - and the results manifest themselves in odd ways depending on the document type (Word, PDF, html, some-other-type).
Software can have an effect -- Online Word, for example, may not be the same as Word-in-a-Box and a PDF file on your computer is never the same as a PDF file on the Internet.
If you think the printer is messing with you because the software is tweaked, then you can remove and then reinstall the printer software -- it does sometimes help IF the software is corrupted or out-of-date.
Install Full Feature Software – Printer
You can download files from the Internet and try printing them from your computer -- local files frequently print better from your computer than they do from the Internet. This assumes you can trust the files to be downloaded onto your computer. Scan any downloaded file with your best Security Software.
You can try setting Word document margins to Narrow. This may work as long as you don't get into trouble with other printer margin restrictions of it if doesn't mess up your document. Depends.
You can try using Print Preview to adjust the margins.
You can try -- when using Word - to adjust the Footer / Header to move the Page Numbers / Headers out of the way of whatever Printer margin restrictions exist. For example, if the printer cannot print within .5 inches of the edge of the paper, make sure the page numbers have been moved away from the edge of the paper at least that far.
Our British friends know that A4 paper is not American "Letter" paper. The difference can present challenges - Word offers an Options setting for this to keep the A4 bottom bits from chopping off. This setting MIGHT do odd things to "Auto" select paper settings in some printers.
You can try using Printing Preferences / Properties to print borderless -- assuming your paper selection combination and printer supports this.
For example:
Printing Preferences > Paper Quality > Advanced >
Under Printing Features >> Borderless Printing > Select from Drop Down Menu "Print Borderless"
Combine this with Print Preview / Margins
The following might be helpful:
Manage Print Output with Print Preview
I hope this helps.
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Similar Messages

HP Deskjet 3520 Prints too small and when trying to Scan it says can't find Computer..

HP Deskjet 3520 ALL IN ONE & E-PRINTER I have had this printer about 1 year and have never got it to print out things(Some) where it can hardly be read. (I have to have a magnifyng glass to read some of it others fine. The kind I AM NOT ABLE to read are pre-printed materials. The kind I AM ABLE to read adequately are things I type out on my Computer and then copy or print out it does fine.. Also when attempting to Scan a piece needed to Scan and printer set to Scan it said no Computer could be found. Can someone tell me how to fix these problems. This printer says 'ALL IN ONE e-Printer but it does not fax.

Hi @mybeaugie
I see you are trying to make the font larger on your printed output, but the small text is only happening when you print from programs aside from documents you create. If you are using Internet Explorer you can use this document; Text is Small When Printing from Internet Explorer. If however, you are using AOL you can following these instructions from this post, 'how do i make the text larger'.
As you can see modifying the text size is going to depend on the program you are using. If you are not using Internet Explore or AOL, can you please post back with more detail. What Browser are you using and what Operating system do you have? Mac or Windows?
I understand you are also getting a communication error when you try scanning. Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
If the scan issue persists, try the steps in the following document and let me know the outcome of your efforts; An 'An error occurred while communicating with scanning device' or a 'There is no computer connectio...
Looking forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Print too small and does not fit page.

Using windows XP and a Brother printer. Have tried several steps listed for solving this problem.
In trying to reset firefox printer instruction , cannot locate the print.print_printer in the list to see if that will work. It is not there. How do I solve that problem?
Changed scale and font size and still does not work to restore settings.
Have version 21.0 installed on computer.

If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

ITunes store print too small and light

Does anyone else with that it were possible to enlarge iTunes store with a two-finger swipe? Or at the least, make the type bigger and darker. Thanks for your consideration.

If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

HP P1006 Prints too Small and cartride life is questionable as it's brand new!

My parents just bought an HP P1006 and there are two issue..keep in mind I live across the country from them and they are not computer literate.
Anyway, your help would be greatly appreciated:
Printing is already fading and they hardly use it...no where near the 700 that comes with the installed cartridge
Secondly, it prints very very small
Any help out there?

Try this for a Quick Fix ...........
After reading other forum comments from people having the same problem with the yellow cartridge popping-out, combined with others who have realised that HP have no interest in compensating anyone for this rediculous example of, at best, 'bad design', or at worst 'blatent planned obsolescence', I have created a 'quick fix' that may add another 1, 2 or more years of life to the HP Officejet Pro L7580 Printer.
This is not the elegant technical solution I was hoping for. However, in hindsight, it may prove to be a more reliable solution than replacing the faulty part that is actually causing the problem. So, here it is the Quick Fix ........
I found a wooden triangular door stop that I cut to size that fitted exactly in the space between the plastic door and the offending yellow cartridge. To hold it in place, I wrapped the doorstop with 2" cellotape, then I stuck the door stop to the inside of the plastic door with double sided cellotape (double sided stick-on foam would also work well). With the doorstop in the correct place, the plastic door closed perfectly and was snug enough to apply sufficent pressure to the offending yellow cartridge, and hence stopping it from popping out again. To make sure the plastic door does not 'fly open' with the pressure of the yellow cartridge (when it wants to pop out!), I applied another piece of 2" cellotape around the outside of the door, holding it to the body of the photocopier.
This exercise only took 10-15 mins to do. I feel this is a much better option than spending another $300+ on a new All-in-One system, as well as being a good environmental solution. If this is DELIBERATE 'planned obsolescence', companies like HP need to be more accountable for, at best, 'sloppy design'. Any feedback would be appreciated.

Print too small, tried everything (I think..)

Hi
I recently installed the driver for this printer from the HP site and replaced some empty ink cartridges. So, printer now prints.
Trouble is, whatever I do in Preferences, or in Word, Acrobat, anything, the page prints too small and centred. The setting in preferences is A4
When I ask the printer to print the TEST pages, i.e the 'Self Test Diagnostic Page' and 'Print Quality Diagnositcs Page' they are both perfect and the correct size.
I am using an older version of Mac OS (10.4.....) but not had trouble before.
Any help/advice would be greatly appreciated. Many thanks.

Hi @migrations
If I am not mistaken, you need to increase the font size within the program you are printing from. Be sure not to increase the zoom, the font size needs to be larger for the print size to be increased.
You may also see a scale to option, or fit to page, in the print preview, this might help too.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Yosemite Apple Mail prints too small

After Yosemite upgrade the body of text in Apple Mail messages prints extremely small. 2 Printers tested - HP Laserjet 5100tn and a Konica Minolta 5500 with a Fiery controller. Printing to a PDF file first is OK.
This only seems to occur when I print messages that I've sent or when I print a message where someone has replied to a message that I sent previously. Only the body of the messages that I sent prints too small. The From, Subject, Date, To, My signature, and anything from messages that have been sent to me from someone else are all OK. In messages that were replies to me from messages that I sent to others, everything is OK except the body of the message that I originally sent to that individual.

I have had this issue as well and have not really been able to resolve it. Yosemite Mail app doesn't seem to have the option that previous OS did where you could choose "Scale Message to Fit," "Rewrap Message to Fit," etc.
Am I missing something here or did they disable this option? I know I can change font or increase font size in preferences, but I don't really need to increase font size for display, only for printing, which seems to be very tiny no matter what I try to do.

Export to pdf...everything too small and shifted to the right

I've been using pages to work on a training manual. The online printer I am using requires pdf. When I export to pdf, the resulting document is shifted to the right and is smaller. I can't seem to find anything about how to make it look right. I've also tried print to pdf, change options there such as scale, scale to fit pages, etc. Nothing works!

I've had this the same problem in the past. What application are you using to view the PDF? When I use Preview it typically looks good, but when I use Acrobat, the font is smaller and doesn't look as good. There are two solutions I've tried for this. One, make sure the font you're using is an Adobe font; if it isn't, it may be render properly when using Acrobat to create the PDF. Two, increase the font size to a minimum of 14, and this might make it appear more accurately regardless of whether the font you're using in Pages is an Adobe font.
I've also had trouble with Google Chrome in sometimes shifting certain PDF's and only printing 3/4's of the document in a print out. I now use Safari to view/print my PDF and never have that problem.

Web printing too small

Any web printing I do is too small and I don't know how to reset the size. This started with Tiger. Any help out there?

reset

Print too small to read

New HP Officejet J4580
All in One
Prints too small. When I disable shrink to fit to after enlarging font, it cuts off text.
How to print larger?

I use a Compaq laptop computer, belong to Frontier.Com and TRY to print on C3180 All In One. It was working fine, but now
when I print emails, the printing font is SO SMALL I can bearly read it. How do I increase this?
I do NOT have this problem when printing something from Internet other than email.
HP has not given me any help that works so far.

The toolbar displays File, Edit, View, etc. print too small & barely able to read. How to enlarge print. Also background color of toolbars hard to read. It is black. make larger?

The Menu Bar, Roboform Bar in general all toolbars the print is too small and barely able to read. Please tell me how to enlarge the print. Also, the background color is black and hard to read. Thanks for any help you can give me.

Use this extension to adjust the font size for the user interface:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
Increase the String pref layout.css.devPixelsPerPx from 1.0 to 2.0 in 0.1 or 0.05 steps to adjust the size of all fonts and other elements in Firefox.<br />
In current Firefox versions this pref is a String value parsed to a float and allows to fine tune the dimensions of all elements (user interface and web pages) more precisely.
*http://kb.mozillazine.org/about:config
You can use an extension to set a default font size and page zoom on web pages if the above steps made the text too large.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Anything printed with firefox prints too small

anything printed with firefox prints too small. If I print and email it prints in the center top of the page and is just larger than a credit card. if I adjust the scale to 100% the it prints what could fit on one page onto 4 pages and prints a small portion in the center top of the page and is just larger than a credit card.

Ok i think i fixed this issues.
i went to about:config print.print_margin_bottom (and also left, right and top) and right clicked reset (it took out the previous 0.5 value). now the pages look normal on print preview without the large margin

How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English

How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English
== This happened ==
Every time Firefox opened
== From the beginning

Some add-ons:
Default FullZoom: https://addons.mozilla.org/en-US/firefox/addon/6965 (I use this one)
No Squint: http://urandom.ca/nosquint/
Also:
http://support.mozilla.com/en-US/kb/Page+Zoom
http://support.mozilla.com/en-US/kb/Text+Zoom
http://kb.mozillazine.org/Browser.zoom.siteSpecific

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Ok, look at your files in Photoshop. What is the profile assigned to them? You can find this out by going to the Status bar at the bottom, clicking on the right-pointing triangle and choosing document Profile from the list.
Then in Windows, go to your Control Panel > Color Management and add sRGB (if it isn't there) and select it as your default profile.
I hope that will work.

Print too small

HP 4600 printing too small. How do I enlarge using Apple Snow Leopard program?

What program are you trying to print from?
Photosmart or Officejet printer?
Wireless or USB?
Thanks,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Prints too small and doesn't do margins correctly

Similar Messages

Maybe you are looking for