Prints with caption/description printed on the back

What I want to do is order prints that have comments printed on the back.
Is there any way to do this within iPhoto and using the internal iPhoto print ordering? Maybe using Picasa 3?
If you have to go elsewhere, e.g. upload to Shutterfly, is there a way to upload the comments along with it? In other words, if I fill out the "description" within iPhoto, that info will upload and print to the back through the online service.
The only way I know how to do this is upload to Shutterfly and add the comments in their online system, but I'd rather be able to do it in iPhoto or Picasa.
Thanks so much, hope this was clear enough.

What I want to do is order prints that have comments printed on the back.
There is no way to do this with iPhoto.
As for Picasa and other non-Apple services you'll need to check with their support services.
Regards
TD

Similar Messages

  • BIP - not to print on the back of the page base on certain condition?

    Hi,
    I have a BIP rtf word template to print job class title report. The report prints on front and back of a page if it is under the same job class title, which is fine. But when it is a different job class title (fk_job_title), I want to print on the front of a new page not the back of the previous page. Is there a way I can control the different job class title to print on front of a new page? This is how my template looks. Thank you so much in advance for all your help.
    CLASS TITLE: F fk_job_title PAY GRADE: p_grade
    JOB CODE: job_code SALARY RANGE: r1 - r2
    LOCATION OF WORK
    work_location
    GENERAL DESCRIPTION
    general_description
    ESSENTIAL WORK TASKS
    essential_work_task
    KNOWLEDGE, SKILLS, AND ABILITIES
    knowledge_skill_ability
    MINIMUM REQUIREMENTS
    EDUCATIONAL AND EXPERIENCE: education_experience
    SUBSTITUTIONS: substitution
    CERTIFICATIONS/LICENSES: certification_license
    OTHER JOB ASPECTS: other_job_aspect
    NOTES: special_note E
    PB
    Thank you,
    MT

    Hi Vetsrini,
    Thank you so much for your quick respond.
    I do have the PB - <?split-by-page-break:?> on my template in the PB (NOTES: special_note E (last column on the row)
    PB)
    The problem that I am having with is when my report (under the same class title) print on front (of page # 1), continue on back of page 1(which is page # 2), and continue on front of page 3.
    If my class title change to a different class title, this print on the back of page 3 (which is page # 4), but I want it to start a new page (5). I don't want this to print on the back of page 3. If the user needs to pull certain job class specification, then all the printed pages should only have information for that particular job class. I hope I am not confusing you.
    This is the lay out of my template.
    CLASS TITLE: F fk_job_title PAY GRADE: p_grade
    JOB CODE: job_code SALARY RANGE: r1 - r2
    LOCATION OF WORK: work_location
    NOTES: special_note E (last column on the row)
    PB
    Thank you,
    MT

  • How to print on the back of photo paper so it will dry.

    I need to print on the back of some photos I have. I am using an HP Officejet Pro 8500A using Windows 7. I have tried to print on these photos but the ink will not dry.
    The paper I am using is 4x6 glossy everyday photo paper. 
    What should I change in the settings to get the ink to dry????
    This question was solved.
    View Solution.

    Hi,
    most of the Photo Paper will only allow you to print on a single side.
    Unless the used Photo Paper is intended for double side printing you will not be able to print on the back of the paper.
    There are no different settings for any of the sided, it only depand on the used media.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I work on flash light pro and it make a print on the back of the screen of my iphone ??

    i work on flash light pro on my iphone and after i close the application ,i found that the program make a print at the back of my iphhone screen ,, it appears mainly at the blank screen , and i have pics for the application and also for the print that appear on the screen , plz reply on me and tell me how to send you the pics and i want a refund on this fault done by this application..

    i work on flash light pro on my iphone and after i close the application ,i found that the program make a print at the back of my iphhone screen ,, it appears mainly at the blank screen , and i have pics for the application and also for the print that appear on the screen , plz reply on me and tell me how to send you the pics and i want a refund on this fault done by this application..

  • I just bought an Apple TV and i have a bose sounddock with a mini jack in the back and and optical cord with a mini adapter on it (so optical cord going into the Apple TV and the mini adapter on the other end going into my bose dock but i dont get sound??

    I just bought an Apple TV and i have a bose sounddock with a mini jack in the back and and optical cord with a mini adapter on it (so optical cord going into the Apple TV and the mini adapter on the other end going into my bose dock but i dont get sound?

    Not all the sound docks accept both analogue and optical on the auxillary input - I don't think the portable ones does but may be wrong - check the user manual.
    As I said earlier all the mini optical (min Toslink) adapter does it make the optical connector fit a smaller socket, it does not convert digital audio to analogue for an analogue only auxillary input.
    AC

  • Pad 2 with no apple logo on the back

    i recenty got back my apple ipad from best buy warranty with no apple logo on the back. it just came with a plan case is that normal?

    My main guess is that it's to save money from having to laser etch them, but they're the same part, just without the lettering.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • HT3275 Help? Time Machine could not complete the back up due to iMacsparsebundle is already in use??? This is the error message I am getting now with my Time Capsule as the back up device. Any suggestions?

    Help? Time Machine could not complete the back up due to iMacsparsebundle is already in use??? This is the error message I am getting now with my Time Capsule as the back up device. Any suggestions?

    Pull the power cord from the back of the Time Capsule
    Wait a few minutes
    Push the power cord back into the back of the Time Capsule
    See if the Time Capsule will back up now
    If not, see #C12 in this document:
    http://pondini.org/TM/Troubleshooting.html

  • How do you print on the back of a greeting card in Photo Creations

    I want to put pictures/text on the back of a greeting card created in Photo Creations, how do I do that?
    This question was solved.
    View Solution.

    Hi again, JaysMother.
    Are you making print-at-home or ship-to-home cards? For Print at Home, you could make a second card that has just the front image and blank inside surfaces (use the Plain White theme). Then feed the paper through again, upside-down. Experiment with plain paper first to make sure everything's lining up the way you want.
    Let us know how it goes!
    RocketLife
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • How do I print on the back of 6x4 photo I have a photo smart 5520

    I have 50 6x4 photos for wedding invite.and I need to print times ext on revers.

    Hi,
    I take it that you want to print on the non glossy side of the 6x4 photo.
    You can do this by simply inserting the paperglossy side up in the photo tray but becasue the back side is not designed to take ink, the print quality will be very poor and it likely smudge and smear very easily. I'd recommend letting them dry for a long time and avoid hadling until they are dry.
    The other alternative would be to get double sided (booklet type) media which would give good photo quality on each side.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Color prints in the back ground of everything I print

    I just set my printer up, and I have tried several test prints, and the same thing keeps happening!!!  The prints keep coming out with the entire page full of all the colors.  It looks like a rainbow of colors on the entire page. I don't know what's wrong. I need help fixing this.  This printer is brand new!!!

    
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar

  • Is it possible that my refurbished iphone 5 could have a different IMEI to the original one printed on the back of the phone?

    I found an iPhone with the same type of scratch marks as mine being sold ten minutes away from my house on eBay. I had lost it in the area previously. It had all the same specs, colour, is locked to my network and is blocked as I did with mine after reporting it. The police confiscated it as a stolen phone anyway, but I haven't been able to prove its mine, as the number on my box doesn't match the IMEI on the phone. So of course it's either a big coincidence or it is my phone and the number the police referenced from it (from the back of the phone) is not the number the phone now goes by. Is this possible at all?
    The IMEI I have for the phone is 01****033
    It's a black 16gb iPhone 5 refurbished by and locked to three
    Would really appreciate any help.
    Cheers,
    Michael
    <Personal Information Edited by Host>

    If you sent the iPhone to Apple to be refurbished, then the iPhone you received back is very likely NOT the phone you sent. Check the paperwork that came with the refurbished unit.

  • HT1766 hi i just got a brand new iphone 5s i tryed to set it up but it doesnt work. when i plug it in with itunes it does all the back up and restore and when its finished i still cant use the phone as i still ask me to start the set up from the beginning

    hi i just got a brand new iphone 5s i connected to itunes to restore all my data from the previous phone. when all the back up is finished i still cant use the phone as it ask me to restart again....  dont know what to do i tryed to restore 3/4 times but again when the restore is completed i still can't use the phone????

    Replacements via Apple tech support are usually refurbished units, not new stock, though none of us here can say with certainty what you will receive. But you will not be able to tell the difference between new stock and a refurbished unit, and refurbished units generally go through more extensive testing than do new units, so getting a refurb may well be better than getting new stock.
    Regards.

  • Is there a 13 in. Macbook Pro shell with a little pocket on the back to hold an external HDD?

    I am looking for a hard shell that can hold my seagate 1 TB drive on the back of my Macbook Pro 13in 2012 (not retina, regular), while its pluged in. Kinnda like the rack thing for the back of an iMac, just this one would hold it tight to the back of the computer. If no one knows of somthing like this, if you have connections you should mention it to them. (make sure to tell them i was my idea!) Well thanks to anyone who can help! P.S. I will need to know before the middle of november!

    I've seen the rack that some have attached to the back of various iMacs. However, a MBP opens and shuts, and there isn't any place to attach a rack without marring the look of your machine.
    The main connections for most users would be the lightning, power, and USB connections. For others, the mini audio connection is useful. But something to hitch to the back of your MBP might be an eyesore. See it from the POV of the potential user.
    On the other hand, a Mac-friendly case to hold your MBP, cables, drives, USB sticks, and adapters makes perfect sense. Put the MBP in one pocket, the peripherals in the other(s). I strongly suggest you visit your local Apple Store, since they're packed with items like these that fit your needs. Do a search on eBay for Swissgear and take a look at their cases.

  • BCM call flow architecture with detailed description of all the components

    Hi Experts,
    Please provide me BCM call flow architecture and detailed description about all the component Eg. When a customer calls on xxxx number call hits to IVR and than as per customer DTMF routed to available agent. In that call what are the components that participate and what is there roles. Is there any architecture diagram that can explain all the functionality? 

    Hello Raman,
    Start with SAP BCM 7.0 SP6 Basic Installation Example document, on Service Marketplace. That document shows voice routing paths and explains the main functions for every component. The component functions are also touched in Master Guide and Security Guide, also on Service Marketplace.
    Kind Regards,
    Tomi

  • WRT610N issues with Windows 7 RTM and what's my version nothing printed on the back of the router

    I got to explorer, choose network, then click the computer icon for WRT610N, it asks for a user name and password I enter the admin user name + password (here I notice that the domain is by default my computer domain, so I enter user name as \\WRT610N\admin) however, I get a prompt which says the user name is invalid.
    Any ideas???
    Also on another note, if I turn over my router to check which version it is, there is no version number mentioned... my firmware as displayed when I get to the router status page displays as "Firmware Version:  1.00.03 B15  May. 14, 2009"
    Thanks in advance for the help.

    If its not accepting the default Username and Password, then have you tried to change the password to access the storage Drive when you were trying to configure the settings on  your Router? If you are not sure about the settings, then login to the Router setup page and click on the "Storage" tab and click on the sub tab "Administration" and under "User Management" select the User "admin" and click on "Modify" and change the password and click on Save Settings...
    Once you are done with the settings, now try to Map the drive again on your computer, and when prompted for the Username and Password, type username and password (admin : username and password : which you created) and click Ok. This will let you view the Shared Folders which you have created on your Storage Drive. Right click on it and select "Map Network Drive" and below check the box "Re-Connect at Logon" and click on Finish.
    These way it will map the Storage drive on your computer and you should be able to transfer the files on your Storage Drive. 

Maybe you are looking for

  • How to change the link in the attachment of a notification

    Hi All, We have a requirement in the workflow. The notifications from workflow are sent as email with attachments in it to the performers which contains the login links to Instance. We have two Middle tiers in our architecture(Public and Private MTs)

  • Error installing 10g on Windows Server 2003

    I am trying to install Oracle 10g on a Windows Server 2003 box. I'm following the instructions listed here: http://www.oracle.com/technology/obe/10gr2_db_single/install/wininst/wininst_otn.htm Everything seems to go fine up until step 8. My Oracle Ne

  • Make panel visible with Applescript in CS5.5

    Hello all, I am looking to make the Separations Panel visible using Applescript in InDesign CS5.5. Just can't seem to locate the correct syntax. All assistance appreciated. Thank you.

  • PCUI:Add REF_TO_HEADER to pcui(CRMD_BUS2000112) BILLPLAN TAB at item level

    Hi , We are trying to add Header billing plan check box REF_TO_HEADER (Billplan Tab) TO pcui application service contract'S(CRMD_BUS2000112) BILLPLAN TAB AT item level. 1.Append the structure CRMT_BSP_SRC_SERVICEDATA_2_IL  with REF_TO_HEADER field 2.

  • Vertical writing in smartforms

    Hi, I would like to write a vertical text in smartform, is it possible? how? Thanks.