Prints wrong colour from Word 2007. O.P. XP

Question

Printing from word 2007 with Black text, is printed in Cyan?  Have Repaired Word ,cleaned the Registrey and updated HP driver, but not corrected the fault?  Any ideas?
This question was solved.
View Solution.

Answer 1

You didn't mention what printer model you have, but in the meantime, try this.  If this does not solve your problem, please let me know and add your printer model so I can do a more thorough search for a resolution. 
Tobindo
An HP Representative
HP PSC 1100, 1200, or Officejet 4100 Series Not Printing Correctly  (See this link for full instructions with diagrams, plus other solutions to try.  The following instructions were taken from this document.
The colors are incorrect
This normally occurs because one of the ink cartridges are low on one or more colors of ink, do the following to determine if the ink cartridge is out of ink.
Check the estimated ink levels in the Printer Toolbox. If the all-in-one software is not installed, skip to Step 2.
NOTE: The estimated ink levels are calibrated for the HP 56 and HP 57 ink cartridges. The estimated ink level will be incorrect for the HP 28 ink cartridge.
In the HP Director software, click Settings , click Print Settings , and then click Printer Toolbox .
In the Printer Toolbox, select the Estimated Ink Level tab as is shown in Figure 1. Remember that this is an estimated ink level based on counting the drops of ink used and that it may not reflect the actual amount of ink remaining. If one or more of the colors of ink are low or empty, replace the ink cartridge.
Figure 1: The Estimated Ink Level tab of the Printer Toolbox
Print a test page by one of the following methods:
From the Printer Toolbox: Select the Device Services tab of the Toolbox and then click Print a Test Page . The test page marked A in Figure 2 will print.
From the all-in-one front panel: Press and hold the Cancel button, and then press the Color Start Copy button. The test page marked B in Figure 2 will print.
Figure 2: Self test pages - A is from the Printer Toolbox, B is from the front panel
If the colors on the test page look correct and are not faded or light, continue troubleshooting with Step 4 below. If the colors on the test page do not look correct or are faded or missing, clean the ink cartridges as detailed in the "Cleaning the ink cartridges " section below. Replace the ink cartridge if the correct colors do not print after cleaning the ink cartridge.
Assign a color management profile to the all-in-one. To do this, refer to the following:
Click Start , click Settings , and then click Printers (in Windows XP, click Start , and then click Printers and Faxes ) to open the Printers folder.
In the Printers folder, right-click the HP all-in-one printer icon and then click Properties .
Click the Color Management tab.
Click Add to see the list of available color profiles.
In the Add Profile Association dialog box, select Diamond Compatible 9300k G2.2.icm .
Click Add and then click OK . Print the file again. If the application does not print in color, use Microsoft Paint to print a document with colors.
Try printing again and see if the colors are better.
When printing on some photo papers, there can be a greenish cast to blacks when photo paper is the selected paper type. Change the Paper Type setting to HP Bright White paper or Plain paper and print the page again.