Prior to putting a password on my Airport Extreme my laptop pc had access to the internet. With the passwaord it will connect to the base station but will not got to the internet. Help!
I think I have tried everything but it's not working. Sooo I guess there are several other things that I need to do.
The user manual for the Speedstream 5200 indicatest that it is a router....see link below.
http://www2.windstream.net/downloads/links/SpeedStream211.pdf
If the Speedstream is acting as a router, then the AirPort Extreme must be configured in Bridge Mode to avoid having two routers in series on your network....which would certainly cause IP address conflicts and connection issues.
To configure the AirPort Extreme in Bridge Mode.....
Open AirPort Utility - Click Manual Setup
Click the Internet icon
Connection Sharing = Off (Bridge Mode)
Update
Similar Messages
-
I put my password into my airport extreme and says wrong password what can I do thanks
I put my password into my airport extreme and says wrong password what can I do thanks
If your password is incorrect, perform a "soft reset": momentarily depress its reset button, and launch AirPort Utility. A "soft reset" will lower the Extreme's shields for about five minutes, so that you can configure it with a new password.
AirPort Utility is in your Mac's Utilities folder. -
My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software. I'm not sure what to do to remedy this situation.
This might sound like a silly question, but are you sure the iOS devices (iPhone, iPad, iPod touch etc.) are still trying to connect to the same network from your own Airport router, as the MacBook Pros are? If you tap Settings on them, is the network name next to where it says Wi-Fi, the right one?
I've got a weird feeling that either in the past couple of days, a neighbour got an Airport device and hasn't set it up yet (causing your iOS devices to try to help), or that perhaps there's an issue with your Airport router and they're noticing it and trying to help out, while for whatever reason, Airport Utility isn't opening itself on the MacBook Pros like it normally should if there's a problem.
If you open Airport Utility on one of the MacBook Pros, does it report any problems with your Airport device, and can you view/edit the settings on it? -
Whenever i try to download a free app, I click, "free", It then breifly says "installing" before requesting my password. After i put in my password, it does not install, but instead now once again says "free" but sometimes with a small "+" sign. Please help!
There are a variety of acceptable forms of payment. If you don't want to use a credit card purchase and enter an iTunes gift card. You will not be charged for free apps but you do need to have an acceptable form of payment entered at this point.
http://support.apple.com/kb/HT5552 -
My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.
Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement. -
I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?
The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan. -
Setting up new ipad 2. Won't accept my PW for my Airport Extreme (Wi Fi network?) Where is the PW for my Wi Fi? I am stymied. Can I set up through my MacBook Pro, which IS connected to my WiFi network?
If you could provide the make and model number of the modem that the AirPort Extreme will be connecting to, we can likely tell you a bit more about what to expect in the way of getting the AirPort set up and working.
Unfortunately, "plug and play" does not apply here. You will need to set up and configure the AirPort Extreme using your iPad or iMac to name the AirPort as a device, assign a device password, name the wireless network, assign a device password and a few other things.
Once the AirPort Extreme is set up, you can connect the PC to one of the LAN <--> ports on the AirPort Extreme using an Etherent cable.
The iPad and iMac will connect to the wireless network that the AirPort Extreme provides. -
Why can't I set up my AirPort Extreme as a wireless jumper from my Cable internet router ?
Why can't I set up my AirPort Extreme as a wireless jumper from my Cable internet router ?
If it "joined" my network is it extending the coverage of my wifi network ?
Please review my previous answer in the post above......
But, the Express does not "extend" or "repeat" the wireless signal when it joins a network. In other words, wireless devices cannot connect to the AirPort Express the way that you have it set up.
If so can my Airport Extreme be set up to "join" my network and also extend the coverage of my network ?
Again, please review my previous answer in the first reply above......
The AirPort Extreme does not have this type of capability.
If you have both an AirPort Extreme and an AirPort Express.....my suggestion....again, found above in a previous post.....
It takes a minimum of two Apple routers to extend a signal using wireless.
You could do this by connecting the AirPort Extreme to your cable router using a permanently installed Ethernet cable and then configuring the AirPort Extreme to "create a wireless network".
Then add an AirPort Express in a location where it can pick up a strong wireless signal from the AirPort Extreme and configure the Express to "extend a wireless network".
You would not use the wireless on your cable router at all, unless you wanted to reserve that network for guests or something similar. -
We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this? We're running two Macs wirelessly with no problems. And the Wii did connect before the switch.
Hello and thanks for the reply. I gave this a try, turned off Airport on one of the computers and tried the Wii again. Still no connection. I should say that we're also running an old G4 (wired) off the Airport as well, with no problems. I've tried many things to make the Wii to work, including power cycling the Airport, turning off the security settings in the Airport, resetting the Airport to it's default and redoing the network, resetting the network setting on the Wii (several times), moved the Airport closer to the Wii, all with no luck. The Wii "sees" the Airport but won't connect to it. I'm at a loss for anything else to try, so any help is appreciated.
-
When attempting to set a password on my Airport Extreme Guest Network i get this "Advertising a service globally using Bonjour requires a global hostname." What does it mean. Or what i need to do to correct it.
When trying to troubleshoot my problem I discovered a forum that was saying certain NTFS drives work just fine
Apple support says that an NTFS or exFAT drive cannot be used when connected to the AirPort Extreme.
I suppose it is possible that someone might have been using some type of special software on the drive that might perform a "conversion", but without more details, it is hard to know.
Note: ExFAT and NTFS formats aren't supported.
http://support.apple.com/kb/HT2426 -
I have airport extreme and just purchased a D-Link DCS-932L home network camera. D-Link says I need UpNp but the extreme doesn't support this. Can I use port mapping? if so anyone know how to set that up? thanks
Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, leave the default; this will change to "Custom" once you start entering port values.
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
Click on Update.
To connect to the shared Camera from a remote location using a Mac or PC:
Start your favorite web browser.
Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888 -
Connecting to my base station/HD via the internet?
Forgive my general ignorance about this stuff. I have an Airport Extreme set up with an external HD and printer -- all seems to work perfectly. I'm using two laptop PCs on the home wireless network with great success.
My question: Is it possible to connect to my base station when I'm NOT at home, via the interenet? It would be very convenient to access files on the HD when connected elsewhere. I realize there are inherent security risks in doing this, but I imagine there's decent password protection, etc.
Can this be done? Haven't been able to figure out how using Apple's provided manuals. Thanks in advance.AmbroseStafford wrote:
I tried to start Back To My Mac and get an error that it isn't working properly because of a problem connecting to MobileMe. I think it is a Certificate issue. Under the Securities section of my MobileMe account the .Mac Identity Certificate is flagged as expired (so is the .Mac iChat Encryption Certificate). The expiration of the certificate never seemed to cause any problem before. I've been using using MobileMe without an issue until I tried to start Back To My Mac.
When I view the security settings of my MobileMe account, I see an expired certificate from 05/08/09, but there's also a certificate that's to expire on 04/17/10.
One potential solution that I found on the forum was to delete the old certificate from Keychain Access and then start Back To My Mac again. I tried this but unfortunately it still doesn't work.
Any ideas on how to renew the .Mac Identity Certificate ?
What you need to do to implement your original request (involving access to a disk on your AirPort Extreme) requires changes to the configuration of your AirPort Extreme. Launch AirPort Utility, double-click on your AirPort Extreme to enter "manual setup" mode, then select the "Advanced" panel and the "MobileMe" tab. Enter your MobileMe information (taking care with capitalization), then update your AirPort unit. -
I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive. -
my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!
If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Family sharing music who work on different computers
hi everyone, here is the question, which will start with a long explaination. my desktop computer is the "main" computer of the house. i have about 35,000 songs on it in my itunes. everyone in the house (wife & son) uses my music (which is everyone's
-
Showing dynamic images in BI Publisher PDF report
I defined a RTF report layout in BI Publisher. Almost done, but one requirement missing... I should be able to include a dynamic image (so every "object" on the report has it's own image). At first I embedded the base64 converted image in the XML out
-
Why can't I update from iPhoto 5.0.4 to iPhoto 6?
On my G4 867 mhz dual mac it is not possible to install iPhoto Update 6.2.1 or 6.0.2. The Computer says, that there is not the right version of iPhoto at "/Programme/iPhoto.app". I have OSX 10.4.6 on my Computer. What can I do against this problem? T
-
Apple Authorised Service Provider refusing to do warranty work - what to do
Hi all, I have a 1st Gen 1.8 20" that has died with a power issue (big time but intermittent). It fits within the serial number range published for Warranty Extension work (replace midplane board I gather...?). I have followed the advice given in the
-
Firefox opens a window but the page stays white. It will not load. == This happened == Every time Firefox opened == about 5 days ago == == User Agent == Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET C