Priority based processing & Scheduling

Hello,
We are using Oracle SOA Suite 11g and have the following 2 requirements:
*1. Priority based processing:* We need to prioritize the SOAP requests from the clients. e.g. the requests from the GUI should be prioritized compared to the mass processing requests. Do we have some out of the box capabilities in Oracle SOA Suite to achieve this?
I can think of the only solution based on the deployment, where the requests from the mass provisioning goes somehow to a different nodes.
*2. Scheduling:* How we can schedule a specific task at a specific time using Oracle SOA Suite? There is any out of box way to do this?
In Oracle SOA Suite 10g I achieved this using a database polling adapter. Let me know if there is any better way to do it. Thanks!
Regards, Prafull

Hi Prafull,
I can think of the only solution based on the deployment, where the requests from the mass provisioning goes somehow to a different nodes.Yes. It is an option. From my point of view, you should do the priority based routing in service bus. Service bus should receive the message and on the basis of it's priority (you may set a custom header), it should route the message to the appropriate instance. When I say instance, it may be a different node, a different service or any persistent location (AQ, JMS Queue or Topic). Each and every instance will process all the messages it receives.
2. Scheduling: How we can schedule a specific task at a specific time using Oracle SOA Suite? There is any out of box way to do this?
Scheduling BPEL Process in 11g using native SOA Suite functionatliy
Re: How to implement in OSB: Scheduling, Timers and Custom properties
It's a topic of debate and I think by going through above two threads you may understand that. Let us know your use case in detail.
Regards,
Anuj

Similar Messages

  • How to create event based process chains

    Hi All,
    I would like to know about event based process chains. In connection to this, could you please answer the following queries,
    1. How to create events
    2. How to link created event to the process chain in the same BI or BW system and as well as from  
        externel BI system.
    3. How link one process chain with other process chain (i.e, After completion of one process chain, it
        should trigger other dependent process chain)
    Thanks and Regards,
    Kotesh.

    1). Doubt regarding first question.
    For example, i would like to create time based event (it should be trigger daily at specified time),
    where we have to maintain scheduling options while creating event.
    When i checked SM62 there i found only two options a). Event name and b). Description.
    Could please send any doucument link if you have.
    Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
    2). For externel BIW system also same procedure we need to follow or any difference.
    Ans : Externally you need to trigger the same event.
    3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
    Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
    I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
    Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
    But Metachain is preferred for such thing.Though it does similar thing.
    Hope this helps.

  • About Process Scheduler in PS

    Hi one and all what is process scheduler in PS ?
    My major question is What is the difference b/w Process Monitor and Report Manager Under Process Scheduler ??

    Hi,
    Read this in Peoplebooks to learn more about the process scheduler.
    Process Scheduler, Process Monitor and Report Manager:
    http://docs.oracle.com/cd/E28394_01/pt852pbh1/eng/psbooks/tprs/book.htm?File=tprs/htm/tprs02.htm#H2001
    Process Monitor
    After you submit a job using the Process Scheduler Request page, use Process Monitor to review the status of scheduled or running processes. You can view all processes to see the status of any job in the queue and control processes that you initiated. Process Monitor consists of two pages: the Process List page and the Server List page.
    Use the Process List page to monitor the process requests that you submit. If a process encounters an error, or if a server is down, you can find out almost immediately. You can also see what processes are queued to run in the future.
    Report Manager
    As part of PeopleSoft Process Scheduler, Report Manager provides several different methods of viewing reports, based on the level of access granted. For example, only users who are assigned to a Report Manager Administration role in PeopleSoft Security can delete reports from the database using the Report Manager - Administration page.
    Using Report Manager, you can see all of the reports that you are authorized to view by opening your report list in a browser. Folders are provided to assist in organizing reports and reducing the size of the report lists.
    This is the difference between the two.
    Regards,
    Wijnand

  • Component is not getting displayed in process scheduler menu

    Hi All,
    I have created a project and created/registered a component in that project. I have also added a page which is having a record definition with a record named L_RUNCNTL having two search fields, to this component and configured L_RUNCNTL as search record for this component.
    I have registered this component with below details:
    Menu Name : PROCESS_SCHEDULER
    Bar Name : PROCESS
    Folder Name as PT_PROCESS_SCHEDULER
    Select “Always Use default local node?” Check box
    Permission List : PTPT1000
    But after registration, when I open process scheduler menu I dont see this component listed. However, previously I created a component in this project and registered it with same details given above and I could see it in process scheduler menu.
    I am surprised why another component registered with same details is not getting displayed in process scheduler menu.

    Thanks Michel,
    I got this problem resolved. Here is what I did:
    Ran portal security sync at the navigation PeopleTools > Portal > Portal Security Sync.
    Cleared browser cache, accessed the page again and saw the link was available.

  • How to print of a crystal output on paper through process Scheduler in PeopleSoft.

    Post Author: rajaumareddy
    CA Forum: Charts and Graphs
    while printing crystal through process scheduler in PeopleSoft it giving Error as Runstatus. and i given in Printer destination.
    Could u help me to find solution.
    1. what are process scheduler setup.
    2. Is there any Sever side setup (Default server)

    Srinivas, Thanks for your quick reply.
    This is smartform, and sending the output as pdf, except the the first page on which I have the text to be printed on the email body. In this email body text I have to display an email.
    when user clicks on the email should open an outlook with the email id in the TO. Hope this helps.
    Thank you,
    Surya

  • Delivery Split based on Schedule line data

    Hi,
    Would need some help in determining how to proceed with splitting delivery based on Schedule line data (Date/Time).
    If S.A 1 has line item 10 with two schedule lines SL1 and SL2 which happened in different times of the day, how to split this S.A to two deliveries in delivery creation (thru VL10E).
    Please suggest.
    Thanks,
    Preema

    Hi,
    In copy control see which Split routine is there, with the help of abaper
    Copy that and create new one, an maintain your date criteria in newely created routine and assign that.
    T-code VOFM
    Kapil

  • Error in creating the process scheduler

    Hi all,
    I recently installed with Peolesoft 8.9 and tools 8.49 and oracle 9i.
    Now i tried to create the process scheduler.
    I have got the error in the image http://narchu.coolinc.info/install_failed.html
    what i did.
    from the menu i selected to create a new process scheduler.
    gave the name as fsdmo
    configure? yes
    changed the username to VP1
    changed the password to VP1
    and then load the config as shown.
    start the process scheduler.
    then it gave the error in the image in the above link.
    The password is not gettin encrypted. i think it must be encrypted, but i am not sure.
    Can any one please help solving it.
    Thank you,
    Bye.

    I think if it is default installation without screwing anything VP1 can start app and Proc server.
    But Nicolas is right, to get more we need log file....it may be database connectivity issue, password encryption issue , tuxedo issue and much more.If u can post the logs it will helpful to diagnose your issue.

  • I am getting the below error while bringing up the Process Scheduler error

    Hello ,
    I am getting the below error while bringing up the Prcs Scheduler.
    Cannot open message catalog TMADMIN_CAT
    Starting Process Scheduler Server PSNT for Database FSUAT ...
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 752; check TUXDIR=C:\b
    ea\Tuxedo8.1, LANG=English_United States.1252
    INFO: BEA Tuxedo, Version 8.1, 32-bit, Patch Level 192
    NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1571; check TUXDIR=C:\
    bea\Tuxedo8.1, LANG=English_United States.1252
    NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1570; check TUXDIR=C:\
    bea\Tuxedo8.1, LANG=English_United States.1252
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=C:\b
    ea\Tuxedo8.1, LANG=English_United States.1252
    exec BBL -A :
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUX
    DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=C:\b
    ea\Tuxedo8.1, LANG=English_United States.1252
    exec PSDSTSRV -p 1,600:1,1 -sPostReport -- -C psprcs.cfg -CD FSUAT -PS PSNT -A s
    tart -S PSDSTSRV :
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 1685; check TU
    XDIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
    tmboot: NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 827; check TUX
    DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
    tmshutdown -y
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 753; check TUXDIR=C:\b
    ea\Tuxedo8.1, LANG=English_United States.1252
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 916; check TUXDIR=C:\b
    ea\Tuxedo8.1, LANG=English_United States.1252
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 907; check TUXDIR=C:\b
    ea\Tuxedo8.1, LANG=English_United States.1252
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 936; check TUXDIR=C:\b
    ea\Tuxedo8.1, LANG=English_United States.1252
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 948; check TUXDIR=C:\b
    ea\Tuxedo8.1, LANG=English_United States.1252
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 775; check TUXDIR=C:\b
    ea\Tuxedo8.1, LANG=English_United States.1252
    Please suggest.

    Duplicate thread :
    Re: I am getting the attached error while bringing up the Prcs Scheduler
    Nicolas.

  • Getting error while posting reports on Unix Process Scheduler Server

    Hello ,
    I am getting the below error while posting reports on Unix Process Scheduler Server .
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) HTTP transfer error.
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) Post Report Elapsed Time: 0.0900
    PSDSTSRV.14171 (10) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
    Please advise ,thank you.

    user5838027 wrote:
    Node name :PS_HTTP
    URL: http://ddas1020.dev.com:16000/psreports/hrdmo
    URI:SchedulerTransfer/hr90dmo
    URI Port: 16000
    Please let me know if any other info is needed.
    Thanks.
    typo...
    URL: http://ddas1020.dev.com:16000/psreports/hr90dmo
    Hopefully, your application URL looks like http://ddas1020.dev.com:16000/psp/hr90dmo/..., your URI host looks like ddas1020.dev.com (or corresponding ip address), and hhtp is checked.
    Did you also tried to give the web login/password ?
    Nicolas.

  • Dynamic file names on file based  processing

    Hi Experts
    we are doing file to file scenario using file based processing not on message based ( No Reposiitory Objects - No mapping , no interface objects ).
    we need to pickup the file name from the source directory and place it in the target directory with the same file names.
    the source file name is added with the time stamp and client number,
    Since there no mapping , we can't use the dynamic file concepts.
    Please help me with the possible solutions
    thnz for the help in advance.
    Cheers
    Faheem

    Hi Faheem,
    You will be using the dynamic config when u want to map the input file name to a field in the target message.
    As per ur requirement ASMA will do :
    try this:
    In both the sender and receiver file adapters , select Adapter Specific Identifiers and File Name
    In the receiver file adapter give some dummy value for file name and directory.
    In the runtime, the source file name and directory will be used as the target file name and directory.
    You need not use any UDF or a mapping here
    Hope it helps!!!!!!!!

  • Process scheduler picking up trace settings that are not currently on

    I'm running a custom application engine program. I tested the program in the same instance last week with a full trace turned on. The trace was turned on under processes. I've since refreshed the database and dumped the process scheduler cache (Unix process scheduler). After the refresh, I turned off the process trace. I ran a quick test of the program to see what the trace settings are. To my disappointment the full trace is still showing at the end of my parameters list in the process monitor. I've tried forcing a trace -0, the parameters will not change. It's very, very strange. Unforuntately, I have to process a lot of data using this application engine program using CI. Is there any other area in Peoplesoft that I might be forgetting that an application engine trace can be turned on?

    How have you refreshed the database ? How did you re-apply your customization after refresh ? How is defined the prcs ? Did you change the prcs configuration file to set the trace off ? Did you checked the process definition ?
    Nicolas.

  • App Server and Process Scheduler stuck while booting

    Hi All,
    We are facing a big issue in our production instance.The application server showed down while accessing the PIA.When we tried to reboot the same it didnt start and was getting stuck after some steps..few snipets are below after the last PSSRENSRV process does not proceed further.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5584 Assume started <pipe>.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5600 Assume started <pipe>.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5616 Assume started <pipe>.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5632 Assume started <pipe>.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5648 Assume started <pipe>.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5664 Assume started <pipe>.
    exec PSRENSRV  --A  --   -C  psappsrv.cfg  -D FNPROD  -S PSRENSRV:The tuxedo,appserv and renserv logs shows,
    renserv log
    ----- Begin booting PSRENSRV -------------------------
    0.5608 [14/Jul/2011 07:51:54](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
    ----- Begin booting PSRENSRV -------------------------
    0.5056 [14/Jul/2011 07:58:47](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
    ----- Begin booting PSRENSRV -------------------------
    0.780 [14/Jul/2011 08:21:04](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.------------------------------------------------------------------------------------------
    tuxedo log
    receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!JSH.5060.5084.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
    082104.UKLO2K3S55!WSH.4364.1752.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!WSH.4472.4416.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!WSH.1684.4128.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!WSH.4256.4172.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!JSH.4876.496.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
    082104.UKLO2K3S55!WSH.4896.4284.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!JSH.4800.1036.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
    082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:703: ERROR: Cannot get statistics on message queue 43
    082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
    082104.UKLO2K3S55!WSL.3904.4032.0: WSNAT_CAT:1197: INFO: Exiting system
    082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 61480 (errno = 22)
    082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
    082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1197: "INFO: Exiting system"
    082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
    082104.UKLO2K3S55!JSL.4316.4024.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
    082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=2,buf=9580216,bytes=4572,type=-1073741824,flag=2048
    082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving------------------------------------------------------------------------------------------
    app serv log
    PSADMIN.4944 (0) [07/14/11 07:48:28](0) Begin boot attempt on domain FNPROD
    PSWATCHSRV.4720 (0) [07/14/11 07:48:33] Starting
    PSADMIN.4944 (0) [07/14/11 07:52:29](0) End boot attempt on domain FNPROD
    PSADMIN.4944 (0) [07/14/11 07:55:46](0) Begin boot attempt on domain FNPROD
    PSWATCHSRV.1412 (0) [07/14/11 07:55:50] Starting
    PSADMIN.4892 (0) [07/14/11 08:08:07](0) Begin boot attempt on domain FNPROD
    PSWATCHSRV.5032 (0) [07/14/11 08:08:13] Starting
    PSADMIN.4892 (0) [07/14/11 08:08:27](0) End boot attempt on domain FNPROD
    PSADMIN.6104 (0) [07/14/11 08:20:28](0) Begin boot attempt on domain FNPROD
    PSWATCHSRV.6124 (0) [07/14/11 08:20:32] Starting-----------------------------------------------------------------------------------------
    tuxedo log
    213815.UKLO2K3S55!PSSAMSRV.6072.6040.0: LIBTUX_CAT:262: INFO: Standard main starting
    213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
    213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: LIBTUX_CAT:262: INFO: Standard main starting
    214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=257,buf=10285048,bytes=4572,type=-1073741824,flag=0
    214434.UKLO2K3S55!PSRENSRV.2440.2444.-2: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=277,buf=11551960,bytes=8668,type=805306369,flag=0
    214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=257,buf=10285048,bytes=4572,type=0,flag=0
    214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 33242 (errno = 22)
    214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
    214434.UKLO2K3S55!BBL.5964.4464.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=258,buf=9654368,bytes=27996,type=-1073741824,flag=2048
    214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving
    214507.UKLO2K3S55!tmboot.4616.5152.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
    214507.UKLO2K3S55!tmboot.4616.5152.-2: TUXNT_CAT:4: ERROR: Cannot access ipc server (The system cannot find the file specified.
    214507.UKLO2K3S55!tmboot.4616.5152.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
    214508.UKLO2K3S55!PSADMIN.868: End boot attempt on domain FNPRODAlso the process scheduler was not getting booted the logs are shown below,
    scheduler log
    085646.UKLO2K3S55!restartsrv.2484.4116.-2: server BASE/101: CMDTUX_CAT:587: INFO: Cannot restart server, scheduling for cleanup
    085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:550: WARN: Cleaning up restartable server BASE/101
    085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 4300 died; removing from BB
    085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5372 died; removing from BB
    085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5640 died; removing from BB
    085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5768 died; removing from BB
    085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: 07-14-2011: Tuxedo Version 8.1 32-bit Windows.
    085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: GP_CAT:1077: ERROR: Unable to open environment file E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env for reading
    085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: LIBTUX_CAT:353: ERROR: Error putting ENVFILE E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env into environment
    085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: server BASE/101: CMDTUX_CAT:551: INFO: server removed
    085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
    085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
    085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 64479 (errno = 22)
    085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
    085743.UKLO2K3S55!BBL.4044.5996.0: CMDTUX_CAT:26: INFO: The BBL is exiting systemIs this a problem with Tuxedo if so what has to be done...Pls help its a bit urgent...
    Thanks in advance...

    First of all; if a problem is urgent then you should always contact Oracle support instead.
    It looks like the domain is corrupt within Tuxedo. You could try to reconfigure the domain so that it will get recreated in Tuxedo. Make sure you have a backup before you do this. To reconfigure the domain simply open a CMD box and type the following command (from the appserver directory):
    psadmin -c configure -d "DOMAIN_NAME"
    You can only use this command for the application server.

  • Issue with Bulk Load Post Process Scheduled Task

    Hello,
    I successfully loaded users in OIM using the bulk load utility.  I also have LDAP sync ON.  The documentation says to run the Bulk Load Post Process scheduled task to push the loaded users in OIM into LDAP.
    This works if we run the Bulk Load Post Process Scheduled Task right away after the run the bulk load.
    If some time had passed and we go back to run the Bulk Load Post Process Scheduled Task, some of the users loaded through the bulk load utility are not created in our LDAP system.  This created an off-sync situation between OIM and our LDAP.
    I tried to use the usr_key as a parameter to the Bulk Load Post Process Scheduled Task without success.
    Is there a way to force the re-evaluation of these users so they would get created in LDAP?
    Thanks
    Khanh

    The scheduled task carries out post-processing activities on the users imported through the bulk load utility.

  • How to Map a .txt File To Process Scheduler Output In Peoplesoft

    Hi,
    My Requirement is to map the Output file (*.txt ) to the report repository (Log/Trace).
    Please let me know if this is possible in PeopleSoft.

    yes, we can. check the below.
    1. make sure the Peopletools, process scheduler, system settings, distribution file options - has system file or display checked on.
    2. make sure the orperator used to run the AE on the batch server machine has the full access to move, delete the directories and files are creating
    through the AE.

  • Process scheduler server list is not populating in SERVER LIST page.

    Need urgent help.
    We have PeopleSoft Campus Solution 8.52,9.0 application. We had two Process Scheduler server one in Linux and one in NT. There was one issue that all the jobs which processed were getting into success and reports were also posted,however it was not updating the database with data. In order to solve it I created a new Process Scheduler server at onther NT machine. This time when I navigated to Process Monitor --> Server List pages it has no data there. I ran COBOL job but it went to successful and report posetd but nothing was updated into the database.
    Please help me out of this situation.
    Thanks
    Vikrant

    Thanks a lot RCC for your response.
    There is actually three issues
    1)Process Monitor Server List page has no data.
    2)As I go to run a process in the system process request I see that the Server Name,Reccurence,Type and Format are not workin or they are disabled.
    3)Cobol jobs which I am running through PSNT is not updating database,however the Process is getting successful and reports are having posted status,but when I go to see Reports it is not having any output file its blank.I tried to check the reports at webserver,there were also no reports were published,However it works properly for all other Process.
    For the first problem it has got resolved the solution is in this "Process Monitor Server List Not Populating With Data (Doc ID 615323.1)"( for those who face this problem in future :)).
    For your query RCC, I have named same name of PSNT which was earlier in the different machine.
    Please help
    Thanks
    Vikrant.

Maybe you are looking for