Priority on manual entries

hi everybody
can anybody tell me if we give at MANUAL ENTRIES field as AUTOMATIC ENTRIES HAS PRIORITY in condition type maintainence and give tick mark on MANUAL ENTRIES at pricing procedure which will system concider FIRST while pricing?

Hi,
In pricing procedure (V/08) if you give the condition type as manual that will be entered manually during the sales order processing... normally there will not be access seq and condition records for manual conditions
the manual entries field in V/06 is applicable for automatically determined conditions. its not applicable for above mentined manual conditions. this option is for priority between manual and automatic entries for conditions which assigned with access seq and condition recs...
' '    No limitations
A    Free
B    Automatic entry has priority
C    Manual entry has priority
D    Not possible to process manually
Hope you clear now...
Reward if helps
Muthu

Similar Messages

Manual entry of excise duty a purchase order

Hi ,
Excise duty is calculated based on percentages which are maintained in the J1ID t code in SAP.
I want to have a condition types defined in a particular type of PO which allows for manual entry of the Excise duty .( As you all know that some times excise duty needs to be calculated based up on per Kg i.e.. quantity rather than as a fixed percentage of value.i want these conditions to capture these types of transactions)
How can i achieve this funcationality.??

Hi ,
Excise duty is calculated based on percentages which are maintained in the J1ID t code in SAP.
How can i achieve this funcationality.
You have to Define Condition type
SPRO -MM-Purchasing-Conditions-Defien Price Determine Process---Define Condition Types
In condition type you have seelct change which can be made option and choose Manual entries 'C' option for Condition Type Manual entry has priority.
This condition type you can use at the time of PO creation as a Condition type with Manual entry has priority.
The same condition type you have to define in pricing procedure also.
For this condition type you can abale to maintain manually.
Regards,
Rama Mohan Bangaru

Making manual entries - In condition type

Hi All,
Can you please explain in detail about _ , A and C ? This is the value we give in manual entries in Condition type ? Plz give a business scenario.
<<
Indicator which controls the priority within a condition type between a condition entered manually and a condition automatically determined by the system.
Make the following entries according to your requirements:
_: No limitations
A: Freely definable
C: The manual entry has priority. When you enter the condition
manually, the system does not check whether a condition record exists.
>>

Hi,
No limitation means it is free to do all the changes,overwrite etc.
C means even if the condition record is present and you enter the condition manualy,manual entry has priority over the condition record.
Reward points if useful
Regards,
Amrish Purohit

Restrict Manual Entry of Items while creation of sales order

Hi,
<b>Requirement:</b>
User can create a sales order only for line items of contract if sales order is created with reference to contract. Any manual entry of line item should be restricted.
<b>Analysis:</b>
I have coded to check the line item is created with ref to contract or not.( VGBEL gets populated if it is created with ref to contract.). I checked in userexits (USEREXIT_SAVE_DOCUMENT_PREPARE) and (USEREXIT_FIELD_MODIFICATION).
Do help if anyone have come across such scenario.
Regards
Sailaja.
(Intelligroup)

Hi,
This functionality may be possible with a Configuration setting in SPRO.
plz check with your Functional guys.
regards.

Automatic Payment terms without referrring Customer Master nor manual entry

Hi,
I have a credit memo with reference to one billing document. It is automatically coming with payment terms which is not maintained in customer master nor manual entry in the document. I had checked all the configuration related settings for the document and payment terms assignment. I had debugged and checked for any user exit or function module.
I have no clue in this regard and can anybody throw some light regarding to fix the problem.
Regards
Sashikanth

Hi,
Check if the billing document has payment terms. If yes, even if customer master doesnt contain payment terms the payment terms will be copied to the credit memo through standard copying control maintained in IMG, when you create a document with reference to some document this copying control gets activated.
Also check user exit RV60AFZZ if there's any code written in it to default payment terms by billing doc type.
Regards,
Amit

Clearing of manual entries in GR/IR not happening

Hi All,
I've made two manual entries in the GR/IR account. The second entry being the reverse of the first, so basically they cancel out each other. But as these arent linked to a PO, the line items arent being cleared by F.13
I tried manual clearing FB1s and F-04 but it picks up only one line item (the reverse line item i.e. credit item). And so I cant even manually clear these line items.
Can you please provide a solution?
Regards,
Tejas

Hi Tejas,
Please have a look at Note : 178487, maybe it helps... it talks about several points like:
1. In the master data of the G/L accounts, flag "Line item display" or "Open item management" was set for accounts which do not require line items.
2. Update of FI data from the upstream modules is too detailed.
3. Problems during clearing
4. Data is kept too long in the system.
But I am not very sure whether it answers your exact scenario.
Coming to the point of clearing open line items 'easy way', as Janani mentioned, there seems to be no easy ways for clearing the open line items. As I understand, the primary reason for this could be because we are dealing with business sensitive data and the open line items are infact open because of some valid reason, and should not be closed using short cuts. What I mean is... a line item could be (or should be) open if there is some business transaction yet to be completed or it is closed if the transaction is completed and its the job of the user who is responsible for the transaction to make sure that the line item is cleared when the transaction is complete.
In my experience, as you and Janani have experienced, it is normal that we see a lot of documents not archivable because of open items. In my previous experiences, we have handled it this way:
1. Run the Archive run in test mode (prefarably with 'only incorrect docs in log')
2. Give the log to the financial users/module owners to analyze the log (you can use FB99 also to see whether individual documents are archivable or not)
3. Come up with a strategy to close the open items. Distribute the log to respective users (maybe according to doc type) and come out with a time schedule to close these items. It will definately take some time.. say weeks, to analyze each item and close it.
4. Come up with a strategy so that so many documents are not kept open (unnecessarily) in the furture
5. FI owners should have a relook whether the accounts managed under open item management are really required in OIM.
In summary, no short cuts :(.
Hope this helps,
Naveen

Excise duty & Educational Cess required display mode no manual entry allow

We have automation program for creation of excise invoices for different customers. If I excute the program for the same system is allowing me to change / manual entry of excise duty, assessable value & ED Cess. Which is not required for our business rate and will be fixed, and I want to know where we can do the change for display mode.
Excise invoice no manual entry possible.
Regards,
Vijay Sanguri

Hi,
Go to V/06
Select your excise or cess condition type, go to details
REMOVE TICK MARK OF AMOUNT / PERCENTAGE & VALUE
Then it will appear in display mode in order & also in invoice
Kapil

No manual entry in PR00 in case of Sales organization 5000 or 6000

Hi Guru's
My requirement is that eg if Sales organization is 1000 then user can enter PR00 amount manual while creating Sales Order
IF is it 5000 or 6000 then PR00 will not allow any manual entry while creating Sales order
Regards
Arun
Edited by: ArunSingh2010 on Mar 4, 2010 10:53 AM

Hello,
I am not sure but still you can try out the setting in the pricing procedure itself. Please navigate through the path as cited below:
SPRO setting ---> Sales And Distribution ---> Basic Function ---> Pricing ---> Pricing Control --> Define and Assign Pricing Procedure.
In the defination section where all the condition types are arranged for a Pricing Procedure, you can include a Routine in calculation type for the Condition Type PR00.
Seek the help of ABAPer and put the logic as when the Sales Organsiation(VKORG) is 1000 then the Automatic determination should not be considered and Manual entry will be accepted.
Kindly let me know the result of this exercise.
Regards,
Sarthak

How to restrict Manual entry in G/L with automatic Postings

Dear Gurus
We have a house bank account and have its three subsidiary account incoming, PDC and outgoing account. now whenever a user enter an incoming entry he has to do incoming debit and customer credit but some times as there is no blockage they mistakenly enter Main account instead of Incoming. We take the authorization of main account from them but it stops them from making reconciliation through ff67 or feban. Now please suggest what we do to stop them making manual entry in house bank account.
Please suggest
Salar

Hi,
Make autoposting for main bank account through master data maintenance.
Regards
Hari.

Manual entry of CST & VAT cond in sales order

Hi all,
I have a senario where in my client wants to enter CST and VAT manually in the sales order, we are using TAXINN,
Is it advisible for the above senario or can we maintain the above conditions manually.
Problem is i changed the conditon types to manual entry, it is allowing in sales order but in Invoice it is picking up from the condition record already maintained for VAT and CST, if i give deletion indicator for all the records which i have maintained and enter manully will it work,
Please help in this regard.
Thanks in advance
Siva

Hi ,
There is one option for tackling such senerios .
In copy control between Sales Order and Invoive tcode VTFA
There is one option called Pricing type (Just Press F4) and select the one which says copy pricing element unchnage and redetermine taxes (Put G or B in this field ) .
If there is delivery relevant billing goto VTFL and do the same change at Item level
put G or B in Pricing type field.
G - it will copy pricing as it is and redetermine taxes only
B - It will carry out new prining in Invoice.
This will definately work.

Manual entry of tax in billing

Dear all,
While creating sale order, as per my client's requirement, i had manually entered tax. But this manual entry doesnt have tax code.So while creating billing, it gives account determination error that is in account key MW3, gl account is missing.
Please tell the process in manual entry of tax.
Will award points.
thanks & regards,
AR

Hi,
U just maintain that Tax condtiotype in Pricing procedure and tick Manual field then assing propr GL account key and also maintain the same in Revenue account determinatio..
Once u maintain this, then u can give tax condition manually in sales order and even in billing..
Regards
Sankar

Manual entry of batches for finished product

Dear Guru's,
I want the manual entry of batches in the production order & automatic batches for raw materials. I have maintained the autoamtic batch number assignment as Inactive in T-code OMCZ. After maintaing this system is asking for manual entry for batches for raw materials also. I want the manual entry for production order & automatiic entry for raw materials.
I have changed the setting to " No automatic batch creation in production / process order" in production scheduling profile through T-code CORY. Assigned this production scheduling profile in work scheduling view. Even though I am facing the problem.
Hope it is clear. Need your inputs.
Regards
Kalyan

Dear,
Kindly follow the path > logistic general > Batch management >Define Batch Creation for Goods Movements (here you can use function for creation of batch against movement type)
> logistic general > Batch management > Define Initial Creation of Data for Batch Master Transaction (Here you can use function for creation of batch against material type)
Kindly check and revert back.
thanks
Muhammad Ashfaq

SD - Manual entries allowed for item category in the Sales Order

Hi experts,
please do you know any OSS note related to SD, in order to increase the number of Manual entries allowed for item category in the Sales Order (table T184)?
Thank you very much
Andrea

Hi,
I searched OSS notes and did not find any OSS Note related to add more than 11 Manual Item categories or append T184 Table.
Has any found solution for this, will this be a CORE MOD.
Pavan Verma

MIGO_GR fill delivery note field from manual entry in bill of lading

I have to fill header field delivery note from manual entry in bill of lading in tcode MIGO_GR for mopvement type 101.
I searched for the exits and BADI's but header fields are not in changing parameters.
Has anybody worked on automatically filling the delivery note field in MIGO_GR transaction from bill of lading field or a value from database?

Hi You can use MB_MIGO_BADI Badi.
Thanks,
Anmol.

How do I save email addresses from in box without manual entry?

Any other email program I've used will recognize an email address when you type in a letter or two in the TO box. It seems Thunderbird only looks at the address book that has to be manually input. Doesn't seem to be an option to remember an address from your inbox. I have to be missing something. Manual entry into the contact list can't be the only option...right?

Thunderbird adds outbound addresses to your Collected address book. Would you really want every address that you received an email from clogging up your address book? Junk mail and all?
When you are viewing an email in the message pane or a tab there is a star to the right of the addresses. If the star is filled with color that address is in one of your address books. If the star is empty you can click it to add the contact to the Personal address book. Clicking a filled star will open the contact edit dialog box to add more details or move to another book.
This is NOT the same star to the left of the message headers.

Priority on manual entries

Similar Messages

Maybe you are looking for