Priority points and QM

Can anyone shed some light on how priority points are calculated and where? Maybe point me to some config? I've searched the help files, OSS and Google for info on this subject.
I found that in the QA32/33 in the dynamic selections there is field available called priority points. QALS-PRIO_PUNKTE.
There is a priortiy points function that appears to be involed with inbound deliveries and is shown as being a calculated value. i don't know if that is the same thing that winds up in QALS-PRIO_PUNKTE or if that is a separate functon. If it is the same thing, how and when is QALS-PRIO_PUNKTE updated and what is this used for. Does it affect anything in QM? I imagine it's a way to identify critical raw materials that need to be processed ASAP. But that is just a guess.
Any ideas?
FF

I never got any replies on this one and I have never found an answer.
I can only guess that SAP expected to use these for something and then never did.
Craig

Similar Messages

Shipping point and storage location determination

for one of my delivery type i had defined shipping point determination as per following.
define shipping conditions
define loading group
assign shipping points: with combination of shipping conditionsloading groupplantprop shippping pointmanual shiping point.
i also checked the cmr and mmr both are correct.still system is not proposing shipping point and storage locatgion in my obd

Hi Charan
Shipping conditions is taken from sold to party
Pls check whether you are using a different SP and SH
Check in these t codes
In OVL2 are you seeing the shipping pt determination for your combination?
In OVL3 are you seeing the storage location determination for your combination?
If yes then shipping pt will be definately picked up in sales order
Storage location will be definately picked up in the delivery if you have assigned the rule MALA in OVLK
Have you assigned your delivering plant to your shipping pt in enterprise structure assignment?
This also check
Refresh the whole order and try again
If need be log out of SAP and relog and see provided you have youR OVL2 and OVL3 correct?
Note If shipping conditions are assigned to your order type in VOV8 then that will have priority over the shipping conditions of SP
So for that combination you should maintain shipping pt in OVL2
Regards
Raja

MTP - Media Termination Point and SBC - Session Border Controller

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
A client of mine wants to build up a MTP - Media Termination Point and SBC - Session Border Controller to use it to connect to the internet or leased lines to their VoIP provider at USA and route the calls into their current IPCC and also use it with their auto dialer to outbound the international calls.
I NEED TO KNOW WHAT ARE THE REQUIREMENTS FOR THIS REQUEST AND HOW CAN IT BE IMPLEMENTED??!!

try this for SBC in XR12000.
http://www.cisco.com/application/pdf/en/us/guest/products/ps6342/c1244/cdccont_0900aecd80391b66.pdf

Best point and shoot camera for concerts

Hi, I am in need of a point and shoot camera that takes awesome photos and videos at concerts. Here are the things I am looking for:
1. Takes good video and photos in low light settings.
2. Compact.
3. Good video mode with continuous shooting (at least 10 minutes in duration.)
4. Good optical zoom.
5. Looking for one around $250-375.
6. Can take good action photos.
Any information would be greatly appreicated as I am looking to buy within a month!
Thanks!!

linsle wrote:
Thanks for all of your advise, I really appreciate it! I know I'm not going to get everything I want in a camera unless I buy a SLR camera, but that wouldn't meet my needs since you can't get into concerts with those types since they consider them "professional." I was actually leaning toward the ZS7 because I have head a lot of good reviews on it from people at concerts and have watched amazing videos shot with that camera at concerts. The zoom is incredibly as well as the sound. Also to clarify my first post about low light, concerts aren't usually that low lighted so I wouldn't need a camera that excelled in low lighting. Do you own a ZS7? If so, what do you like about it and what don't you like about it?
Concerts are actually usually quite dark, especially by photography standards. Perhaps this will help to clarify things a bit:
Direct Sunlight: 32,000–130,000 lux
Full Daylight (indirect sun): 10,000–25,000 lux
Typical Family Living Room: 50 lux
This means that even the lowest amount of full daylight provides 200 times as much light as the typical family's living room. So you can imagine the scenario for a dimly lit concert.
However, I do own a ZS7 and have used one successfully at concerts. Using spot metering, shutter priority and going up to ISO 800 is the best advice I can give you. ISO 400 is better if you can get proper exposure with it. Keep in mind that you are NOT going to be able to hold the camera still enough at full zoom to get blur free pictures in this lighting, so make sure you get decent seats.
I love my ZS7 but the tiny sensor found in the ZS7 and all other P&S pocket cams (except for the Canon S90/S95, Samsung EX1, Panasonic LX3/LX5 and any others with equivalently sized sensors and faster lenses) doesn't do well in low light. Don't fall for that BSI (backlit) CMOS sensor crap that Sony pushes. There are marginal improvements over the other tiny sensor cams but performance is still poor and the daylight performance is much worse than their CCD counterparts at this point. Remember that low light essentially includes all indoor phtography as well as very overcast days, dusk, sundown, etc.
The ZS7 has great contrast and color and a slew of features. It's well made and very versatile. Really the old thing I don't like is the low light performance. I also find the video to contain a lot of artifacting, though it's in line with any other 720p pocket cam. I would defintiely recommend it but if low light is a major concern, check out the other cameras I mentioned as they offer a 40% larger sensor and a faster lens.
Here's a good concert pic with the ZS7. Metric was on during the day and even though it was overcast, it was fairly bright out.
... and here is a bad concert pic with the ZS7. It was very difficult to take pics once SSPU came on as it was after 9pm and dark out.

I have an Air running Mountain Lion. I also have a digital point-and-shoot camera, but have never downloaded any images from the camera to this Air. If I connect the camera to the Air, what might I expect? Will connecting the camera to the Air by a cable

I have an 11" Air with lots of remaining capacity running Mountain Lion. I also have a digital point-and-shoot camera. I have never downloaded images from the camera to this Air. However, if I just connect the camera to the Air's USB port, with the camera's available cable, and the Air is open, will a program like ImageCapture or iPhoto, auomatically come up, and I can begin to download wanted images? Or, will this sort of connection delete or fry everything on the Air? Do I need any other software on board? Will current Apple onboard programs allow me to download images from my camera and not destroy everything else?

Answered. Thanks.

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem.

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem. The only thing that solves it is switching off and on , but sometimes I have to do that for 6-7 times before its ok or wait for a few hours. Some help please

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

TS3297 iTunes puts up a message "The item you've requested is not currently available in the Hong Kong Store." I had not requested anything from the HK store at that point, and I have never used any store other than the HK one. How I can clear that messag

I've been running iTunes on WinXP for years with few problems. I have all my iTunes files on an external USB drive. I just bought a new PC running Win7, 64-bit.
I connected the external USB drive to the new PC and installed 64-bit iTunes on it. When iTunes started up, I pointed it at the iTunes directory in the external drive, using Edit > Preferences > Advanced > iTunes Media Folder Location. It showed a progress bar that it was updating the iTunes Library. I signed in and authorized the new machine. I have one spare authorization.
Then iTunes put up a message "The item you've requested is not currently available in the Hong Kong Store." I had not requested anything from the HK store at that point, and I have never used any store other than the HK one.
When I click OK, the iTunes Store page remains blank, apart from saying "iTunes Store" in the middle of the page.
I went to "View My Account" and pressed the Reset button to "Reset all warnings for buying and downloading items", but that doesn’t fix this particular warning. I also tried Edit > Preferences > Advanced > Reset Warnings and Rest Cache.
But still, every time I click the “App Store” button in the iTunes Store window, the message appears. If I click the Books, Podcasts or iTunesU buttons, these display normally. So I’m stuck with being unable to purchase apps, other than through my iPad and iPhone.
If I move the external drive back to the XP machine, the same thing happens. If I go to another PC - a notebook running Vista - everything is normal.
Any idea how I can clear that message?
Thanks for any help you can offer.

Further info on my question above.
I have tried re-validating my credit card, which apparently fixed it for some.
I have also tried uninstalling, re-downloading and installing again.
Neither of these steps fixed the problem.

Is there a way to transfer photos from a point and shoot camera to a flash drive via the iPad?

Is there a way to transfer photos from a point and shoot camera to a flash drive via the iPad?

No.

How can I use microsoft word, power point and those apps in my new iMac ? i bought this iMac yesterday so am new on tho and i would like to know

how can I use microsoft word, power point and those apps in my new iMac ? i bought this iMac yesterday so am new on tho and i would like to know

If you absolutely must have the Microsoft applications, you can purchase and download them from http://microsoft.com/mac.
Free software suites LibreOffice and OpenOffice offer similar functionality (word processing and spreadsheets).
Or you could do worse than look at Apple's Pages, Numbers and Keynote, which should already be installed in your Mac and can export to Microsoft formats if need be.
Matt

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

Can I switch my Apple ID on the same device and purchase software with my other ID that has a different credit card (or iTunes redeemed points) and then switch back to another user ID?

I have an iPad with an ID that is associated with 1 credit card but I don't wan't to use that credit card to make puchases. Can I switch to a different user ID and make puchases on a different credit card and/or iTunes redeemed points and then switch back to my original ID (before the 90 days wait period us up)?

If changing your password does not solve then contact itunes support.
Click Support at the top of this page, then click the link under Contact Apple Support

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent backgrounds. Any thoughts?

Yes. Well, sort of: instead of a "path", set the pen tool to "shape" in the tool properties. Then set the fill colour to transparent, and the stroke colour to the colour you want. You can also set the stroke width.
Not perfect, but at least you can see the path more clearly - the anchor points and handles still remain the default colour. Open the path panel, and right-mouse click the path shape to create a selection based on that shape. The Paths panel menu also allows you to create work paths based on that shape.
Unfortunately when you try to move the handles the black thin outline appears again until you release the mouse button.
This is one of several things that works better in Photoline: in Photoline, once the path is set to a specific colour, editing the path uses the actual colour and stroke width. which is extremely handy for creating path based selection with awkward background colours and/or a high resolution screen. In Photoline the handles and bezier points are also much, much larger, which makes it rather simpler to work with as well - especially on a higher resolution screen. And when selected the handles and points are a clear red with a black outline - again easier to spot and identify. I just works better, in my opinion.

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

Reoprder point and replenisshment qty to be 0 with SLOC MRP indicator = 2

Dear PP Gurus,
I want to set in MRP4 view: SLOC MRP indicator = 2, along with reorder point = 0/ blank and replenishment = 0/blank. In MM01 and also through MMSC is gives:
Hard error with details as
"You have decided in favor of storage location MRP (2) for this material. Since separately planned storage location stocks are planned using the reorder point planning technique, a reorder point and a replenishment quantity are required."
Can the hard stop be changed to a warning message only?
Help will be appropriately rewared with points!
Thnx.

Hi,
if u want to plan storage locations stock seperately( =2), u have to define reorder level and a replenishment quantity.
During a planning run, the system compares the reorder level of storage locations to be planned separately with the stock of this storage location. If available storage location stock falls below the reorder level, a receipt element is created amounting to the replenishment quantity or, if necessary, for a multiple of the replenishment quantity.
regards
pradeep

Priority points and QM

Similar Messages

Maybe you are looking for